RESUMO
Clay-amended barriers are widely used to prevent hazardous leachate percolation from landfill to subsurface. The performance of these barriers is mostly evaluated through numerical simulations with limited experimental investigation through leachate flushing experiments. To bridge this gap, contaminant loading and its flushing experiments were carried out to assess the performance of clay-amended composite materials as landfill liners. River sand (Sa), loamy soil (Ns), and alternative waste materials like fly ash (Fa) and flushed silt (Si) were used to prepare the composites. Composites fulfilling the hydraulic conductivity (<10-7 cm/s) and compressive strength (200 kPa) criteria were selected for contaminant loading and its flushing experiments to understand the fate of fluoride ions. The experimentally determined hydraulic conductivity (Ks) values for all the composites were in the order of 10-8 cm/s. The experimental breakthrough curves exhibited skewed shape, long tailing, and dual peaks. Dual porosity and dual permeability with immobile water models were employed to simulate these curves, revealing that preferential flow pathways and random chemical sorption sites significantly affect solute transport in clay-amended barriers. Further, scanning electron microscopy and energy-dispersive X-ray spectroscopy were employed to trace the preferred path of fluoride ions through the barrier. The removal efficiency and temporal moments were used to determine the percentage mass retained, mean arrival time, and spreading within the barrier. The highest solute mass was retained by sand-clay barrier (SaB30) (91%), followed by loam-clay barrier (NsB30) (59%), fly ash-clay barrier (FaB30) (38%), and silt-clay barrier (SiB30) (4%) with the least mass. The lowest mean arrival time was calculated for NsB30 (269 h) and the highest for SaB30 (990 h), with FaB30 (384 h) and SiB30 (512 h) having values in between. This study concludes that validating the design hypothesis of clay-amended barriers through contaminant loading and its flushing studies leads to an effective and sustainable design.
Assuntos
Argila , Poluentes Químicos da Água , Argila/química , Porosidade , Poluentes Químicos da Água/química , Poluentes Químicos da Água/análise , Instalações de Eliminação de Resíduos , Movimentos da Água , Solo/química , Cinza de Carvão/química , Modelos TeóricosRESUMO
Once known for its clean and natural environment, the lower Himalayan region is now no exception to human-induced disturbances. Rapid industrial growth in Baddi-Barotiwala (BB) industrial region has led to degradation of groundwater resources in the area. Groundwater samples were collected from 37 locations to study the groundwater chemistry, geospatial variation of 15 toxic metals in groundwater, source apportionment, metals of concern and associated health risks in the region. The results showed rock dominated hydrogeology with decreasing order of anion and cation abundance as HCO3- > Cl- > SO42- > NO3- > Br- > F- and Ca+ > Na+ > Mg2+ > K+ > Li+ respectively. Concentrations of Iron (BDL-3.6 mg/l), Nickel (BDL-0.023 mg/l), Barium (0.22-0.89 mg/l), Lead (0.0001-0.085 mg/l) and Zinc (0.006-21.4 mg/l) were found above the permissible limits at few locations. Principal component analysis (PCA) and coefficient of variance (CV) showed both geogenic and anthropogenic origin of metals in groundwater of the BB industrial region. A consistent concentration of Uranium was detected at all the sampling locations with an average value of 0.0039 mg/l and poor spatial variation indicating its natural presence. Overall, non-carcinogenic (N-CR) risk in the study area via oral pathway was high for adults and children (Hazard Index > 1) with geogenic Uranium as the major contributor (Hazard Quotient > 1) followed by Zinc, Lead and Cobalt. Carcinogenic (CR) risk in the region was high for adults having mean value above the threshold (1E-04) with Nickel and Chromium as the metals of major concern. Spatial variation of health risks was overlayed on village boundaries of the region to identify the potential industrial sources of the metals of major concern. The results highlight the need for immediate remediation of groundwater resources in order to achieve a harmonious coexistence between industrialization and human well-being.