Development of a new class of stable and adaptable free-standing fibre mats with high room-temperature hydroxide-ion conductivity.

For alkaline anion-exchange membrane electrolysers and fuel cells to become a technological reality, hydroxide-ion (OH-) conducting membranes that are flexible, robust, affording high OH- conductivity, and synthesised in a low-cost and scalable way must be developed. In this paper, we engineer a stable, self-supporting, and flexible fibre mat using a low-cost ZIF-8 metal-organic framework composited with ionic liquid tetrabutylammonium hydroxide and widely used polyacrylonitrile as polymeric backbone. We obtain mats with a high intrinsic OH- conductivity for a metal-organic framework-based material already at room temperature, without added ion-conductor polymers. This approach will contribute to the development of low-cost and tuneable ion-conducting membranes.

Formation and growth characteristics of nanostructured carbon films on nascent Ag clusters during room-temperature electrochemical CO2 reduction.

Synthesis of carbon nanostructures at room temperature and under atmospheric pressure is challenging but it can provide significant impact on the development of many future advanced technologies. Here, the formation and growth characteristics of nanostructured carbon films on nascent Ag clusters during room-temperature electrochemical CO2 reduction reactions (CO2RR) are demonstrated. Under a ternary electrolyte system containing [BMIm]+[BF4]-, propylene carbonate, and water, a mixture of sp2/sp3 carbon allotropes were grown on the facets of Ag nanocrystals as building blocks. We show that (i) upon sufficient energy supplied by an electric field, (ii) the presence of negatively charged nascent Ag clusters, and (iii) as a function of how far the C-C coupling reaction of CO2RR (10-390 min) has advanced, the growth of nanostructured carbon can be divided into three stages: Stage 1: sp3-rich carbon and diamond seed formation; stage 2: diamond growth and diamond-graphite transformation; and stage 3: amorphous carbon formation. The conversion of CO2 and high selectivity for the solid carbon products (>95%) were maintained during the full CO2RR reaction length of 390 min. The results enable further design of the room-temperature production of nanostructured carbon allotropes and/or the corresponding metal-composites by a viable negative CO2 emission technology.

A facile and sustainable one-pot approach to the aqueous and low-temperature PET-to-UiO-66(Zr) upcycling.

Accelerating waste management requires the conversion of polymer waste to value-added materials through sustainable approaches. While depolymerised PET has been used as feedstock to produce metal-organic frameworks, this is the first report of the successful one-pot hydrothermal synthesis of the desirable UiO-66 topology through the judicious choice of reactants, modulators and reaction conditions.

Effect of linker functionalisation on the catalytic properties of Cu nanoclusters embedded in MOFs in direct CO and CO2 reduction by H2.

Metal-organic frameworks are promising host supporting matrices for catalytically active guests. In particular, their crystallinity renders them desirable as their pores may act as atom-precise templates for the growth of nanoparticles or nanoclusters therein. This is very advantageous for studying the fundamentals of heterogeneous catalytic processes, especially for site-selective ones, in which the catalyst particle size and shape are of import. Furthermore, metal-organic frameworks may be decorated with organic functional groups, which affect a number of the frameworks' physical and chemical properties, while remaining isotopological, i.e. having identical structural features and thus templating characteristics. Effectively, this allows for the independent tuning of the Brønsted and Lewis acidity of the substrate while the geometry of the catalytically active guest remains identical. In this study, we systematically study the effect of amino functionalisation of UiO-66(Zr) as a supporting matrix for Cu nanoclusters on the direct reduction of carbon dioxide with hydrogen. In particular, we have found that through modulation of the acidity of the inorganic nodes, framework functionalisation effectively controls the reaction selectivity.

Interactions of Hydrogen with Pd@MOF Composites.

Physisorption and chemisorption of hydrogen on solid-state materials are two fundamentally different interactions, both of which display advantages and drawbacks for hydrogen storage. It has been hypothesised that their combination by merging two classes of materials showing different sorption behaviour towards hydrogen in the same composite may synergistically combine their desirable properties. As representatives of such composites, palladium nanoparticles, nanoclusters, and single atoms have been encapsulated in a metal-organic framework matrix, embedded, or immobilised in its pores, respectively. In this minireview, we review advances on the understanding and potential applications of the combination of Pd with metal-organic framework matrices through the analysis of the nanocomposite materials' interaction with hydrogen and sorption properties.

Interrogation of the Effect of Polymorphism of a Metal-Organic Framework Host on the Structure of Embedded Pd Guest Nanoparticles.

Metal-organic frameworks (MOFs) are very promising host materials for nanoscale guest materials. However, some MOFs such as MIL-53 are known to undergo phase transitions which can complicate the guest particle size control. In this study, Pd nanoparticles embedded in Al-MIL-53 were synthesised via (a) electrodeposition and (b) gas-phase reduction. A thorough structural investigation revealed that each synthesis method most likely favoured a different phase of Al-MIL-53, presenting the possibility of MOF phase selection as a technique for size control of embedded nanoparticles. For the first time, we hereby report the use of pair distribution function analysis to successfully investigate the structure and morphology of guest particles embedded in a MOF host.

Thin films of Prussian blue: sequential assembly, patterning and electron transport properties at the nanometric scale.

We present a new approach for patterning thin films of Prussian blue at the micro- and nano-metric scales. In a first step, a resist was deposited on a gold surface and patterns were generated by photolithography or electron beam lithography. The Prussian blue with idealized formula of KFe(III)[Fe(II)(CN)6] was deposited through the sequential exposure of the patterned surface to a series of solutions containing alternately absorbable Fe3+ cations and [Fe(CN)6]4- anions. These building blocks are gradually associated into dense and continuous films and patterned structures of Prussian blue can be obtained finally by lift-off. This approach was also used to deposit Prussian blue thin films on interdigitated nanoelectrodes and the current-voltage characteristics of this device were investigated.

Detailed spectroscopic, thermodynamic, and kinetic studies on the protolytic equilibria of Fe(III)cydta and the activation of hydrogen peroxide.

The crystal structure of the as-yet-unknown salt K[Fe(III)(cydta)(H(2)O)].3H(2)O, where cydta = (+/-)-trans-1,2-cyclohexanediaminetetraacetate, has been resolved: orthorhombic space group Pbca with R1 = 0.0309, wR2 = 0.0700, and GOF = 0.99. There are two independent [Fe(III)(cydta)(H(2)O)](-) anions in the asymmetric unit, and the ligand is (R,R)-cydta in both cases. The coordination polyhedron is a seven-coordinate capped trigonal prism where the quadrilateral face formed by the four ligand donor oxygen atoms is capped by the coordinated water molecule. The speciation of [Fe(III)(cydta)(H(2)O)](-) in water was studied in detail by a combination of techniques: (i) Measurements of the pH dependence of the Fe(III/II)cydta redox potentials by cyclic voltammetry enabled the estimation of the stability constants (0.1 M KNO(3), 25 degrees C) of [Fe(III)(cydta)(H(2)O)](-) (log beta(III)(110) = 29.05 +/- 0.01) and [Fe(II)(cydta)(H(2)O)](2-) (log beta(II)(110) = 17.96 +/- 0.01) as well as pK(III)(a1OH) = 9.57 and pK(II)(a1H) = 2.69. The formation enthalpy of [Fe(III)(cydta)(H(2)O)](-) (DeltaH degrees = -23 +/- 1 kJ mol(-1)) was measured by direct calorimetry and is compared to the corresponding value for [Fe(III)(edta)(H(2)O)](-) (DeltaH degrees = -31 +/- 1 kJ mol(-1)). (ii) pH-dependent spectrophotometric titrations of Fe(III)cydta lead to pK(III)(a1OH) = 9.54 +/- 0.01 for deprotonation of the coordinated water and a dimerization constant of log K(d) = 1.07. These data are compared with those of Fe(III)pdta (pdta = 1,2-propanediaminetetraacetate; pK(III)(a1OH) = 7.70 +/- 0.01, log K(d) = 2.28) and Fe(III)edta (pK(III)(a1OH) = 7.52 +/- 0.01, log K(d) = 2.64). Temperature- and pressure-dependent (17)O NMR measurements lead to the following kinetic parameters for the water-exchange reaction at [Fe(III)(cydta)(H(2)O)](-) (at 298 K): k(ex) = (1.7 +/- 0.2) x 10(7) s(-1), DeltaH(++) = 40.2 +/- 1.3 kJ mol(-1), DeltaS(++) = +28.4 +/- 4.7 J mol(-1) K(-1), and DeltaV(++) = +2.3 +/- 0.1 cm(3) mol(-1). A detailed kinetic study of the effect of the buffer, temperature, and pressure on the reaction of hydrogen peroxide with [Fe(III)(cydta)(H(2)O)](-) was performed using stopped-flow techniques. The reaction was found to consist of two steps and resulted in the formation of a purple Fe(III) side-on-bound peroxo complex [Fe(III)(cydta)(eta(2)-O(2))](3-). The peroxo complex and its degradation products were characterized using Mossbauer spectroscopy. Formation of the purple peroxo complex is only observable above a pH of 9.5. Both reaction steps are affected by specific and general acid catalysis. Two different buffer systems were used to clarify the role of general acid catalysis in these reactions. Mechanistic descriptions and a comparison between the edta and cydta systems are presented. The first reaction step reveals an element of reversibility, which is evident over the whole studied pH range. The positive volume of activation for the forward reaction and the positive entropy of activation for the backward reaction suggest a dissociative interchange mechanism for the reversible end-on binding of hydrogen peroxide to [Fe(III)(cydta)(H(2)O)](-). Deprotonation of the end-on-bound hydroperoxo complex leads to the formation of a seven-coordinate side-on-bound peroxo complex [Fe(III)(cydta)(eta(2)-O(2))](3-), where one carboxylate arm is detached. [Fe(III)(cydta)(eta(2)-O(2))](3-) can be reached by two different pathways, of which one is catalyzed by a base and the other by deprotonated hydrogen peroxide. For both pathways, a small negative volume and entropy of activation was observed, suggesting an associative interchange mechanism for the ring-closure step to the side-on-bound peroxo complex. For the second reaction step, no element of reversibility was found.

Novel tert-butyl-tris(3-hydrocarbylpyrazol-1-yl)borate ligands: synthesis, spectroscopic studies, and coordination chemistry.

The lithium (1) and thallium (2) salts of five new tert-butyl-tris(3-hydrocarbylpyrazol-1-yl)borate ligands [t-BuTp(R)]- (R = H, a; Me, b; i-Pr, c; t-Bu, d; Ph, e) have been synthesized and characterized. Because of steric congestion at B, the reaction between t-BuBH3Li x 0.5 Et2O and excess 2,5-dimethylpyrazole Hpz(Me2) afforded the bis-pz(Me2) derivative, Tl[t-BuBH(3,5-Me2pz)2] (3) after metathesis with TlNO3. The compounds were characterized by elemental analysis and NMR spectroscopy. The Li salts 1a and 1c exhibit fluxional behavior on the NMR time scale in solution at room temperature. The solid-state 7Li and 11B NMR spectra of 1c suggest that this salt exists as a mixture of axial and equatorial isomers. The partial hydrolysis of 1d afforded the dimeric Li complex {Li[t-BuB(pz(t-Bu))2(mu-OH)]}2 (4). The crystal structure of 4 shows two Li cations encapsulated by the heteroscorpionate [t-BuB(OH)(3-t-Bupz)2]- ligands. A salt elimination reaction between FeCl2(THF)1.5 and 2 equiv of Li[t-BuTp(R)] (R = H, Me) followed by an in situ one-electron oxidation produced good yields of the homoleptic, paramagnetic low-spin iron(III) complexes [Fe(t-BuTp)2]PF6 (5) and [Fe(t-BuTp(Me))2]PF6 (6) that were characterized by elemental analyses, magnetic susceptibility measurements in solution and the solid phase, 1H NMR, high-resolution mass spectrometry, Mössbauer spectroscopy, and single-crystal X-ray diffraction. The crystals are composed of discrete molecular units with the central Fe(III) ion in an almost perfectly octahedral coordination to six nitrogen atoms. Compound 5 has the shortest Fe-N bond lengths ever reported for [Fe(RTp(R)')2]+-type compounds.