Dopamine transporter single-photon emission computed tomography-derived radiomics signature for detecting Parkinson's disease.

BACKGROUND: We hypothesised that the radiomics signature, which includes texture information of dopamine transporter single-photon emission computed tomography (DAT-SPECT) images for Parkinson's disease (PD), may assist semi-quantitative indices. Herein, we constructed a radiomics signature using DAT-SPECT-derived radiomics features that effectively discriminated PD from healthy individuals and evaluated its classification performance. RESULTS: We analysed 413 cases of both normal control (NC, n = 101) and PD (n = 312) groups from the Parkinson's Progression Markers Initiative database. Data were divided into the training and two test datasets with different SPECT manufacturers. DAT-SPECT images were spatially normalised to the Montreal Neurologic Institute space. We calculated 930 radiomics features, including intensity- and texture-based features in the caudate, putamen, and pallidum volumes of interest. The striatum uptake ratios (SURs) of the caudate, putamen, and pallidum were also calculated as conventional semi-quantification indices. The least absolute shrinkage and selection operator was used for feature selection and construction of the radiomics signature. The four classification models were constructed using a radiomics signature and/or semi-quantitative indicator. Furthermore, we compared the classification performance of the semi-quantitative indicator alone and the combination with the radiomics signature for the classification models. The receiver operating characteristics (ROC) analysis was used to evaluate the classification performance. The classification performance of SURputamen was higher than that of other semi-quantitative indicators. The radiomics signature resulted in a slightly increased area under the ROC curve (AUC) compared to SURputamen in each test dataset. When combined with SURputamen and radiomics signature, all classification models showed slightly higher AUCs than that of SURputamen alone. CONCLUSION: We constructed a DAT-SPECT image-derived radiomics signature. Performance analysis showed that the current radiomics signature would be helpful for the diagnosis of PD and has the potential to provide robust diagnostic performance.

Improvement of classification performance of Parkinson's disease using shape features for machine learning on dopamine transporter single photon emission computed tomography.

OBJECTIVE: To assess the classification performance between Parkinson's disease (PD) and normal control (NC) when semi-quantitative indicators and shape features obtained on dopamine transporter (DAT) single photon emission computed tomography (SPECT) are combined as a feature of machine learning (ML). METHODS: A total of 100 cases of both PD and normal control (NC) from the Parkinson's Progression Markers Initiative database were evaluated. A summed image was generated and regions of interests were set to the left and right striata. Area, equivalent diameter, major axis length, minor axis length, perimeter and circularity were calculated as shape features. Striatum binding ratios (SBRputamen and SBRcaudate) were used as comparison features. The classification performance of the PD and NC groups according to receiver operating characteristic analysis of the shape features was compared in terms of SBRs. Furthermore, we compared the classification performance of ML when shape features or SBRs were used alone and in combination. RESULTS: The shape features (except minor axis length) and SBRs indicated significant differences between the NC and PD groups (p < 0.05). The top five areas under the curves (AUC) were as follows: circularity (0.972), SBRputamen (0.972), major axis length (0.945), SBRcaudate (0.928) and perimeter (0.896). When classification was done using ML, AUC was as follows: circularity and SBRs (0.995), circularity alone (0.990), and SBRs (0.973). The classification performance was significantly improved by combining SBRs and circularity than by SBRs alone (p = 0.018). CONCLUSION: We found that the circularity obtained from DAT-SPECT images could help in distinguishing NC and PD. Furthermore, the classification performance of ML was significantly improved using circularity in SBRs together.

Development of an 123I-metaiodobenzylguanidine Myocardial Three-Dimensional Quantification Method for the Diagnosis of Lewy Body Disease.

OBJECTIVES: We recently developed a new uptake index method for 123I-metaiodobenzylguanidine (123I-MIBG) heart uptake measurements by using planar images (radioisotope angiography and planar image) for the diagnosis of Lewy body disease (LBD), including Parkinson's disease (PD) and dementia with Lewy bodies (DLB). However, the diagnostic accuracy of the uptake index was approximately equal to that of the heart-to-mediastinum ratio (H/M) for the discrimination of the LBD and non-LBD patients. A simple and pain-free uptake index method using 123I-MIBG SPECT images by modifying the uptake index method may show better diagnostic accuracy than the planar uptake index method. We hypothesized that the development of a new uptake index method for the determination of 123I-MIBG using single-photon emission computed tomography (SPECT) imaging would provide a reliable and reproducible diagnostic tool for clinical application. Regarding this, the purpose of this study was to develop a new uptake index method with a simple protocol to determine 123I-MIBG uptake on SPECT. METHODS: The 123I-MIBG input function was determined from the input counts of the pulmonary artery, assessed by analyzing the pulmonary artery time-activity curves. The 123I-MIBG output function was obtained from 123I-MIBG SPECT counts on the polar map. The uptake index was calculated through dividing the output function by the input function (SPECT uptake method). For the purpose of the study, 77 patients underwent 123I-MIBG SPECT, with an average of 31.5 min after clinical assessment and injection of the tracer. The H/M values, as well as planar and SPECT uptake indices were calculated, and then correlated with clinical features. RESULTS: According to the results, values obtained for LBD were significantly lower than those for non-LBD in all analyses (P<0.01). The overlap of the H/M values between the LBD and non-LBD cases ranged from 2.06 to 2.50. Furthermore, the overlap in uptake index values between LBD and non-LBD cases in planar image analysis was 1.05-1.29. The SPECT uptake index method showed the least overlap of 1.23-1.25, with the highest value for LBD patients clearly distinguished from the lowest value for the non-LBD patients. CONCLUSION: The new 123I-MIBG SPECT quantification method, developed by the input counts of the pulmonary artery, clearly distinguished LBD from non-LBD. Therefore, this method may be appropriate for routine clinical study.

A Simple Non-invasive I-123-IMP Autoradiography Method Developed by Modifying the Simple Non-invasive I-123-IMP Microsphere Method.

OBJECTIVES: We developed a simple non-invasive I-123-N-isopropyl-p-iodoamphetamine (123I-IMP) quantification method by analyzing chest RI-angiography and single photon emission computed tomography (SPECT) images based on the microsphere model (SIMS method). Theoretically, the SIMS method could be changed to the simple non-invasive ARG (SIARG) method by modifying the integrated washout ratio (WR) to one-point WR. If the regional cerebral blood flow (rCBF) values derived from the SIARG and ARG methods correlate well, the facilities employing the ARG method can easily switch to the SIARG method. The purpose of this study was to develop the SIARG method by modifying the SIMS method, and to confirm the feasibility of this method. METHODS: The correlation between the input counts of the SIARG method and the blood counts was determined by linear regression analysis. The rCBF values determined by the SIARG method were compared with the values obtained with the ARG and SIMS methods. RESULTS: There was a good linear correlation between the SIARG counts and the arterial blood counts obtained by the ARG method (r=0.85, P<0.001, n=29). The rCBF values obtained by the ARG and SIARG methods (n=29, 696 ROIs) correlated well (y=1.01x - 3.6, r=0.85, P<0.001). Similarly, the rCBF values obtained by the SIARG and SIMS methods (n=29, 696 ROIs) correlated well (y=0.98x - 15.2, r=0.90, P<0.001). rCBF values obtained by the SIARG method were almost the same as the values obtained by the ARG method, and values of the SIMS method were 15 ml/100g/min higher that of those obtained by the SIARG method. CONCLUSION: The rCBF values obtained by the ARG, SIARG, and SIMS methods correlated very well. Therefore, the SIARG method is potentially useful for examinations in routine clinical practice.

Uptake Index of 123I-metaiodobenzylguanidine Myocardial Scintigraphy for Diagnosing Lewy Body Disease.

OBJECTIVES: Iodine-123 metaiodobenzylguanidine (123I-MIBG) myocardial scintigraphy has been used to evaluate cardiac sympathetic denervation in Lewy body disease (LBD), including Parkinson's disease (PD) and dementia with Lewy bodies (DLB). The heart-to-mediastinum ratio (H/M) in PD and DLB is significantly lower than that in Parkinson's plus syndromes and Alzheimer's disease. Although this ratio is useful for distinguishing LBD from non-LBD, it fluctuates depending on the system performance of the gamma cameras. Therefore, a new, simple quantification method using 123I-MIBG uptake analysis is required for clinical study. The purpose of this study was to develop a new uptake index with a simple protocol to determine 123I-MIBG uptake on planar images. METHODS: The 123I-MIBG input function was obtained from the input counts of the pulmonary artery (PA), which were assessed by analyzing the PA time-activity curves. The heart region of interest used for determining the H/M was used for calculating the uptake index, which was obtained by dividing the heart count by the input count. RESULTS: Forty-eight patients underwent 123I-MIBG chest angiography and planar imaging, after clinical feature assessment and tracer injection. The H/M and 123I-MIBG uptake index were calculated and correlated with clinical features. Values for LBD were significantly lower than those for non-LBD in all analyses (P<0.001). The overlapping ranges between non-LBD and LBD were 2.15 to 2.49 in the H/M method, and 1.04 to 1.22% in the uptake index method. The diagnostic accuracy of the uptake index (area under the curve (AUC), 0.98; sensitivity, 96%; specificity, 91%; positive predictive value (PPV), 90%; negative predictive value (NPV), 93%; and accuracy, 92%) was approximately equal to that of the H/M (AUC, 0.95; sensitivity, 93%; specificity, 91%; PPV, 90%; NPV, 93%; and accuracy, 92%) for discriminating patients with LBD and non-LBD. CONCLUSION: A simple uptake index method was developed using 123I-MIBG planar imaging and the input counts determined by analyzing chest radioisotope angiography images of the PA. The diagnostic accuracy of the uptake index was approximately equal to that of the H/M for discriminating patients with LBD and non-LBD.

Basic Study for the Purpose of Developing a Quantitative 67Ga-SPECT Measurement Method.

PURPOSE: 67Ga-single photon emission computed tomography (SPECT) images vary according to the imaging time and image display methods. The calculation of an index, such as the standardized uptake value used in positron emission tomography, from 67Ga-SPECT images would enable the accurate evaluation of the region of accumulation. The purpose of this study was to elucidate the conversion formula, the lower detection limit (LDL), and recovery coefficient (RC) for quantifying the radiation concentration in the 67Ga accumulation site. METHODS: After chronologically obtaining SPECT/CT images at a radiation concentration of 1.0-442.4 kBq/mL with 27 bottles (diameter: 48 mm, 100 mL), the radiation concentration conversion formula was calculated using the successive approximation reconstruction method. The conversion coefficient was then calculated from the relationship between the count rate and the radiation concentration, and the LDL was determined. To compensate for the partial volume effect, the recovery curve was calculated using the mean SPECT count for six bottles (diameter: 9, 18, 29, 38, 48, and 94 mm). RESULTS: There was a linear relationship between the radiation concentration and the count rate with a good correlation (r=0.99). The LDL was 1.0 kBq/mL. The recovery curve reached a plateau at a diameter of at least 48 mm. CONCLUSION: The calculation of the absorbed dose index was possible using the radiation concentration conversion formula and the RC.

Fully automatic input function determination program for simple noninvasive (123)I-IMP microsphere cerebral blood flow quantification method.

We recently developed a simple noninvasive (123)I-IMP microsphere (SIMS) method using chest dynamic planar images and brain single photon emission computed tomography. The SIMS method is an automatic analysis method, except for the process of setting the region of interest (ROI) of the input function. If a fully automatic ROI setting algorithm can be developed to determine the input function for the SIMS method, repeatability and reproducibility of the analysis of regional cerebral blood flow (rCBF) of the SIMS method can be guaranteed. The purpose of this study is to develop a fully automatic input function determination program for the SIMS method and to confirm the clinical usefulness of this program. The automatic input function determination program consists of two ROI setting programs for the PA and lung regions, and it is developed using the image phase analysis of a chest RI angiogram. To confirm the clinical usefulness of this program, the rCBF in 34 patients measured using the automatic method were compared with the values obtained through the manual setting method. Input functions by the automatic and manual methods were approximately equal. A good correlation was observed between the rCBF values obtained by the automatic method and those obtained by the manual setting method (r=0.96, p<0.01). Further, the total time taken for the automatic SIMS analysis is 1-2min as compared to 20-30min for the current analysis, and therefore, this technique contributes to the improvement of the throughput of nuclear medical examinations.

Development of a simple non-invasive microsphere quantification method for cerebral blood flow using I-123-IMP.

OBJECTIVE: In clinical practice, measurement of the rCBF has mainly been conducted by I-123-N-isopropyl-p-iodoamphetamine ((123)I-IMP) SPECT using the microsphere (MS) method, with continuous arterial blood sampling. While several non-invasive (123)I-IMP quantification methods have been developed, their accuracy has been shown to be lower than that of the MS method. Therefore, a non-invasive quantification method for use in routine clinical practice is being sought. The purpose of this study was to develop a simple non-invasive (123)I-IMP quantification method (SIMS method) with a simple input function-determining protocol based on the MS method. METHOD: The input function for the SIMS method was determined using the administered dose and the integrated lung washout ratio obtained by analyzing the count-time activity curve of the pulmonary artery and lung on dynamic chest images. The mean CBF (mCBF) and input function measured in 80 patients by the SIMS method was compared with those determined using the MS method. RESULT: A good correlation was observed between the counts measured by continuous arterial blood sampling in the MS method and the estimated counts by image analysis in the new method (r = 0.94, p < 0.01). Similarly, a good correlation was observed between the mCBF values determined by the MS method and the SIMS method (r = 0.83, p < 0.01). CONCLUSION: The mCBF values determined by the SIMS method were closely consistent with the values obtained by the MS method. This finding indicates the possibility of use of the SIMS method for routine clinical study.

Usefulness of an Automatic Quantitative Method for Measuring Regional Cerebral Blood Flow Using (99m)Tc Ethyl Cysteinate Dimer Brain Uptake Ratio.

OBJECTIVES: Improved brain uptake ratio (IBUR), employing (99m)Tc-ethyl cysteinate dimer ((99m)Tc-ECD), is an automatic non-invasive method for quantitatively measuring regional cerebral blood flow (rCBF). This method was developed by the reconstruction of the theory and linear regression equation, based on rCBF measurement by H2 (15)O positron emission tomography. Clarification of differences in rCBF values obtained by Patlak plot (PP) and IBUR method is important for clinical diagnosis during the transition period between these methods. Our purpose in this study was to demonstrate the relationship between rCBF values obtained by IBUR and PP methods and to evaluate the clinical applicability of IBUR method. METHODS: The mean CBF (mCBF) and rCBF values in 15 patients were obtained using the IBUR method and compared with PP method values. RESULTS: Overall, mCBF and rCBF values, obtained using these independent techniques, were found to be correlated (r=0.68). The mCBF values obtained by the IBUR method ranged from 18.9 to 44.9 ml/100g/min, whereas those obtained by the PP method ranged from 34.7 to 48.1 ml/100g/min. The rCBF values obtained by the IBUR method ranged from 16.3 to 60.2 ml/100g/min, whereas those obtained by the PP method were within the range of 26.7-58.8 ml/100g/min. CONCLUSION: The ranges of mCBF and rCBF values, obtained by the IBUR method, were approximately 60% lower than those obtained by the PP method; therefore, this method can be useful for diagnosing lower flow area. Re-analysis of prior PP data, using the IBUR method, could be potentially useful for the clinical follow-up of rCBF.

Development of an automatic ROI setting program for input function determination in 99mTc-ECD non-invasive cerebral blood flow quantification.

Non-invasive quantitative measurements are useful for clinical study as these are simple and pain-free procedures. A new non-invasive semi-automatic quantitative measurement method, the improved brain uptake ratio (IBUR) method using (99m)Tc-ECD SPECT, has recently been reported. If an automatic ROI setting algorithm could be developed to determine the input function for the IBUR method, analysis of regional cerebral blood flow (rCBF) can be completed within a few min without recourse to complex techniques, through a fully automatic rCBF analysis program. The purpose of this study was to develop an automatic input function determination program for (99m)Tc-ECD non-invasive cerebral blood flow quantification and to confirm the feasibility of use of this program. The images of 15 consecutive patients who underwent both (99m)Tc-ECD chest RI angiography and SPECT examinations were used for development of the automatic arterial input function program. The images of 69 consecutive patients were used for validation of the program. The coincidence ratio between the ROI automatic method and the manual setting method was 98%. The mean difference in the ROI location was ±6.4 mm in the X direction and ±8.6 mm in the Y direction. Individual rCBF values obtained using these independent techniques were also reasonably well correlated (r = 0.95). The total time for the IBUR analysis using the automatic method is 2-3 min as compared to 20-30 min for the current analysis method. This technique improves the throughput of nuclear medical examinations.

[Determination of the optimal ROI setting position of the input function for the 99mTc-ethyl cysteinate dimmer brain uptake ratio method].

Determination of the input function for the (99m)Tc-ethyl cysteinate dimmer brain uptake ratio ((99m)Tc-ECD BUR) method as a non-invasive quantitative measurement of cerebral blood flow measurement is of critical importance in order to improve the accuracy of this method. The input functions were experimentally obtained by setting the regions of interest (ROIs) in the ascending aorta, aortic arch, and descending aorta on the 49 chest RI-angio images. rCBFs by the BUR method with 3 input functions of the 6 cases were compared with those by the (123)I-iodoamphetamine (IMP) continuous arterial blood sampling method in order to determine the best location for the ROI of the input function. The input function of the ascending aorta was higher than those of the aortic arch and the descending aorta. The input functions of the aortic arch and the descending aorta decreased due to the origin of the three branches of the right brachiocephalic artery, left subclavian artery, and left common carotid artery. A good correlation was found in the regional cerebral blood flow (rCBF) values between the (123)I-IMP continuous arterial blood sampling method and the (99m)Tc-ECD BUR method with the input function of the ascending aorta. Therefore, the ascending aorta is the best location for the ROI of the input function for the (99m)Tc-ECD BUR method.

Improvement of the (99m)Tc-ECD brain uptake ratio (BUR) method for measurement of cerebral blood flow.

OBJECTIVE: The brain uptake ratio (BUR) method for the (99m)Tc-ECD SPECT, a non-invasive measurement method of rCBF, has been used in clinical practice in Japan, because it is simple to use. However, the accuracy of this method is limited, as it has problems in the determination of input function and the regression equation. The purpose of this study is to improve the BUR method by reconstructing the determination process of the input function and regression equation based on measurement of the rCBF by H (2) (15) O PET. METHOD: The input function was obtained by setting the region of interest on the ascending aorta instead of the aortic arch. The 3DSRT algorithm was used to obtain the anatomically standardized rCBF, and developed a semi-automatic analyzing software using C++ in order to stabilize the repeatability of the improved BUR (IBUR) method. The regression equation for the IBUR method was obtained by the H (2) (15) O PET rCBFs in 15 patients with the arterial blood sampling method. All the measurements in this study were performed with the patient in the resting state. RESULT: A good correlation was observed between the rCBF values measured by H (2) (15) O PET and the regional BURs measured by the IBUR method (r = 0.86, p < 0.0001). The rCBF values were calculated for only 5 min using a semi-automatic analyzing software. CONCLUSION: The BUR method was improved by changing the location of the input function from the aortic arch to the ascending aorta based on arterial blood flow dynamics, and reconstructing regression equation based on the rCBF values obtained using H (2) (15) O PET. This finding indicates the potential clinical usefulness of this method.

The interpolated projection data estimation method improves the image quality of myocardial perfusion SPECT with a short acquisition time.

OBJECTIVE: The interpolated projection data estimation processing (IPDE) method increases the amount of projection data by interpolation of the projection data. We examined the usefulness of the IPDE method for (201)Tl myocardial perfusion imaging (MPI) single photon emission computed tomography (SPECT) with a short acquisition time. METHODS: Forty patients with suspected ischemic heart disease underwent stress (201)Tl-MPI SPECT. Both stress and delayed images were acquired with 4 cycles of 360° continuous rotation with a 90-direction setting for 14 min. The projection data used for reconstruction were 1) all cycle data (Tl-90-14min), 2) 2 cycles of data (Tl-90-7min), and 3) 2 cycles of data processed using the IPDE method (Tl-180IPDE-7min). This study compared the detection of the perfusion defect by the uptake score and the image quality of (201)Tl-MPI SPECT using the normalized mean square error (NMSE). RESULTS: The uptake score of Tl-180IPDE-7min was significantly more concordant with Tl-90-14min in comparison to the Tl-90-7min (p < 0.05). The NMSE of the Tl-180IPDE-7min (1.85 ± 1.06%) was significantly lower than that of the Tl-90-7min (2.07 ± 1.24%) (p < 0.05). The degree of improvement by the IPDE method was significantly greater for the delayed (201)Tl-MPI SPECT than for the stress (201)Tl-MPI SPECT (p < 0.05). CONCLUSION: The IPDE method improved the image quality and secured the diagnostic ability of (201)Tl-MPI SPECT for a short acquisition time. Furthermore, the IPDE method is a simple software program that does not require any expensive equipment or use advanced algorithms. These results suggest that the IPDE method may be useful as an adjunctive method for shortening the acquisition time of (201)Tl-MPI SPECT.

Usefulness of the automatic quantitative estimation tool for cerebral blood flow: clinical assessment of the application software tool AQCEL.

OBJECTIVE: AQCEL enables automatic reconstruction of single-photon emission computed tomogram (SPECT) without image degradation and quantitative analysis of cerebral blood flow (CBF) after the input of simple parameters. We ascertained the usefulness and quality of images obtained by the application software AQCEL in clinical practice. METHODS: Twelve patients underwent brain perfusion SPECT using technetium-99m ethyl cysteinate dimer at rest and after acetazolamide (ACZ) loading. Images reconstructed using AQCEL were compared with those reconstructed using conventional filtered back projection (FBP) method for qualitative estimation. Two experienced nuclear medicine physicians interpreted the image quality using the following visual scores: 0, same; 1, slightly superior; 2, superior. For quantitative estimation, the mean CBF values of the normal hemisphere of the 12 patients using ACZ calculated by the AQCEL method were compared with those calculated by the conventional method. The CBF values of the 24 regions of the 3-dimensional stereotaxic region of interest template (3DSRT) calculated by the AQCEL method at rest and after ACZ loading were compared to those calculated by the conventional method. RESULTS: No significant qualitative difference was observed between the AQCEL and conventional FBP methods in the rest study. The average score by the AQCEL method was 0.25 ± 0.45 and that by the conventional method was 0.17 ± 0.39 (P = 0.34). There was a significant qualitative difference between the AQCEL and conventional methods in the ACZ loading study. The average score for AQCEL was 0.83 ± 0.58 and that for the conventional method was 0.08 ± 0.29 (P = 0.003). During quantitative estimation using ACZ, the mean CBF values of 12 patients calculated by the AQCEL method were 3-8% higher than those calculated by the conventional method. The square of the correlation coefficient between these methods was 0.995. While comparing the 24 3DSRT regions of 12 patients, the squares of the correlation coefficient between AQCEL and conventional methods were 0.973 and 0.986 for the normal and affected sides at rest, respectively, and 0.977 and 0.984 for the normal and affected sides after ACZ loading, respectively. CONCLUSIONS: The quality of images reconstructed using the application software AQCEL were superior to that obtained using conventional method after ACZ loading, and high correlations were shown in quantity at rest and after ACZ loading. This software can be applied to clinical practice and is a useful tool for improvement of reproducibility and throughput.

Improvement of image quality using interpolated projection data estimation method in SPECT.

OBJECTIVE: General data acquisition for single photon emission computed tomography (SPECT) is performed in 90 or 60 directions, with a coarse pitch of approximately 4-6 degrees for a rotation of 360 degrees or 180 degrees , using a gamma camera. No data between adjacent projections will be sampled under these circumstances. The aim of the study was to develop a method to improve SPECT image quality by generating lacking projection data through interpolation of data obtained with a coarse pitch such as 6 degrees . METHODS: The projection data set at each individual degree in 360 directions was generated by a weighted average interpolation method from the projection data acquired with a coarse sampling angle (interpolated projection data estimation processing method, IPDE method). The IPDE method was applied to the numerical digital phantom data, actual phantom data and clinical brain data with Tc-99m ECD. All SPECT images were reconstructed by the filtered back-projection method and compared with the original SPECT images. RESULTS: The results confirmed that streak artifacts decreased by apparently increasing a sampling number in SPECT after interpolation and also improved S/N ratio of the root mean square uncertainty value. Furthermore, the normalized mean square error values, compared with standard images, had similar ones after interpolation. Moreover, the contrast and concentration ratios increased their effects after interpolation. CONCLUSION: These results indicate that effective improvement of image quality can be expected with interpolation. Thus, image quality and the ability to depict images can be improved while maintaining the present acquisition time and image quality. In addition, this can be achieved more effectively than at present even if the acquisition time is reduced.

Behaviors of cost functions in image registration between 201Tl brain tumor single-photon emission computed tomography and magnetic resonance images.

OBJECTIVE: We studied the behaviors of cost functions in the registration of thallium-201 (201Tl) brain tumor single-photon emission computed tomography (SPECT) and magnetic resonance (MR) images, as the similarity index of image positioning. METHODS: A marker for image registration [technetium-99m (99mTc) point source] was attached at three sites on the heads of 13 patients with brain tumor, from whom 42 sets of 99mTc-201Tl SPECT (the dual-isotope acquisition) and MR images were obtained. The 201Tl SPECT and MR images were manually registered according to the markers. From the positions where the two images were registered, the position of the 201Tl SPECT was moved to examine the behaviors of the three cost functions, i.e., ratio image uniformity (RIU), mutual information (MI), and normalized MI (NMI). RESULTS: The cost functions MI and NMI reached the maximum at positions adjacent to those where the SPECT and MR images were manually registered. As for the accuracy of image registration in terms of the cost functions MI and NMI, on average, the images were accurately registered within 3 degrees of rotation around the X-, Y-, and Z-axes, and within 1.5 mm (within 2 pixels), 3 mm (within 3 pixels), and 4 mm (within 1 slice) of translation to the X-, Y-, and Z-axes, respectively. In terms of rotation around the Z-axis, the cost function RIU reached the minimum at positions where the manual registration of the two images was substantially inadequate. CONCLUSIONS: The MI and NMI were suitable cost functions in the registration of 201Tl SPECT and MR images. The behavior of the RIU, in contrast, was unstable, being unsuitable as an index of image registration.

[Evaluation of the OS-EM parameter with automatic quantitative analysis for cerebral blood flow of the ECD tool].

The parameters of reconstruction iteration and subset of the ordered subset expectation maximization (OS-EM) method have a great impact on image quality. In a cerebral blood flow (CBF) examination, it is critical to produce consistent results when analyzing clinical data. We evaluated the number of iterations and subset of the OS-EM method to stabilize image quality using a normal case and an infarction case. In the maximum likelihood expectation maximization (ML-EM) method, it was confirmed that the convergence of an infarction case was somewhat delayed compared with a normal case. With the OS-EM method, we have obtained the same results. Based on the rCBF values, we postulate that the iteration value is more than 8 and the subset value is less than 10. Furthermore, multiplying the iteration by a subset value ranging from 50 to 60 helps in stabilizing the quality of CBF imaging.

[Development and assessment of an automatic quantitative cerebral vascular reserve estimation tool for use with triple-injection 99mTc-ECD SPECT].

In nuclear medicine, cerebral vascular reserve(CVR) is evaluated using technetium-99m ethyl cysteinate dimer [99mTc-ECD] and acetazolamide(ACZ). We developed a protocol involving the intravenous injection of 99mTc-ECD in three divided doses(TIE method), and have found that the cerebrovascular response to ACZ depended on time after ACZ administration. However, it was difficult to obtain high-precision quantitative SPECT images by the conventional method because of complicated image processing and image degradation accompanying image subtraction. We recently developed software known as the Automatic Quantitative CVR Estimation Tool(hereinafter referred to as Triple AQCEL), which, after the input of simple parameters, enables us to carry out automatic reconstruction of quantitative SPECT images without image degradation due to subtraction. Triple AQCEL was determined to reduce image degradation caused by subtraction and to provide valid quantitative data. Because Triple AQCEL does not require manual determination of ROI or image selection for the reconstruction of quantitative SPECT images, reproducibility of regional cerebral blood flow by 3DSRT is ensured. Since all analyses in evaluation by the TIE method are automated and the operator plays no part in them, with the resulting increase of throughput, this software will contribute to improved reproducibility of regional cerebral blood flow data, and will be useful in clinical pathophysiological assessment both preoperatively and during postoperative follow-up.

[A paper sheet phantom for scintigraphic planar imaging: usefulness of pouch-laminated paper source].

In order to perform experimental measurements for evaluation of imaging device's performance, data acquisition technique, and clinical images on scintigraphic imaging, many kinds of phantoms are employed. However, since these materials are acrylic and plastic, the thickness and quality of those materials cause attenuation and scatter in itself. We developed a paper sheet phantom sealed with a pouch laminator, which can be a true radioactive source in air. In this study, the paper sheet phantom was compared to the acrylic liver phantom, with the thickness of 2 cm, which is commercially available. The results showed that although some scatter counts were contained within the image of the acrylic liver phantom, there were few scattered photons in the paper sheet phantom image. Furthermore, this laminated paper sheet phantom made handling of the source and its waste easier. If the paper sheet phantom will be designed more sophisticatedly, it becomes a useful tool for planar imaging experiments.

[Development of an automatic analytical tool for quantitative cerebral blood flow measurement using 99mTc-ECD, and verification of clinical examples].

The following process conventionally has been followed to develop quantitative images of cerebral blood flow: (1) mean cerebral blood flow (mCBF) is calculated by the Patlak plot method; (2) a SPECT slice that includes the basal ganglia is selected; and (3) based on the value of mCBF calculated by the Patlak plot method, the SPECT slice is corrected by the Lassen method and developed into a SPECT image of quantitative regional cerebral blood flow. However, this process is complicated, and the values of rCBF have been reported to fluctuate because selection of the SPECT slice and the ROI setting are in the hands of the operator. We have developed new software that automates this analysis. This software enables automatic processing simply by inputting the value of mCBF in the normal hemisphere. Since there is no need for manual operations such as setting the ROI, reproducibility is improved as well. Regional cerebral blood flow as determined by this software is quite similar to that calculated by the conventional method, so the existing clinical evaluation does not need to be changed. This software is considered to be useful.