Evaluation of alginate-coated ß-tricalcium phosphate fiber scaffold for cell culture.

Ex vivo tissue engineering is an effective therapeutic approach for the treatment of severe cartilage diseases that require tissue replenishment or replacement. This strategy demands scaffolds that are durable enough for long-term cell culture to form artificial tissue. Additionally, such scaffolds must be biocompatible to prevent the transplanted matrix from taking a toll on the patient's body. From the viewpoint of structure and bio-absorbability, a ß-tricalcium phosphate (ß-TCP) fiber scaffold (ßTFS) is expected to serve as a good scaffold for tissue engineering. However, the fragility and high solubility of ß-TCP fibers make this matrix unsuitable for long-term cell culture. To solve this problem, we developed an alginate-coated ß-TCP fiber scaffold (ßTFS-Alg). To assess cell proliferation and differentiation in the presence of ßTFS-Alg, we characterized ATDC5 cells, a chondrocyte-like cell line, when grown in this matrix. We found that alginate coated the surface of ßTFS fiber and suppressed the elution of Ca2+ from ß-TCP fibers. Due to the decreased solubility of ßTFS-Alg compared with ß-TCP, the former provided an improved scaffold for long-term cell culture. Additionally, we observed superior cell proliferation and upregulation of chondrogenesis marker genes in ATDC5 cells cultured in ßTFS-Alg. These results suggest that ßTFS-Alg is suitable for application in tissue culture.

Boosting the Ionic Conductivity of Pyrrolidinium-Based Ionic Plastic Crystals by LLZO Fillers.

Organic ionic plastic crystals (OIPCs) have attracted attention as novel organic solid electrolyte materials, but their insufficient mechanical strength and ionic conductivity have prevented their application. In this study, a lithium salt, lithium bis(fluorosulfonyl)amide (LiFSA), and an inorganic solid electrolyte, Li7La3Zr2O12 (LLZO), were added to an OIPC, N,N-diethylpyrrolidinium bis(fluorosulfonyl)amide ([C2epyr][FSA]). The fabricated organic-inorganic hybrid solid electrolytes were evaluated thermally, mechanically, and electrochemically to reveal which factors affect the properties of the electrolytes. All samples showed excellent thermal stability regardless of LiFSA or LLZO concentration, and they were found to be highly plastic and ion-conductive solids at a wide range of temperatures. It was also revealed that the addition of LLZO raised the nanoindentation stiffness (HIT) of the [C2epyr][FSA]/LiFSA composites. The ionic conductivity of the hybrid electrolytes was higher than that of the pristine OIPC, reaching a value of 2.1 × 10-4 S cm-1 at 25 °C upon addition of appropriate amounts of LiFSA and LLZO. Overall, samples with higher LiFSA concentration and moderate LLZO concentration exhibited higher ionic conductivity. Cyclic voltammetry results showed that the [C2epyr][FSA]/LiFSA/LLZO composites were lithium-ion conductors. These findings indicate that by optimizing the concentrations of lithium salt and LLZO, it would be possible to realize their applications as solid electrolytes.

Two-Dimensional Layered Organic-Inorganic Hybrid Perovskite Thin-Film Fabrication by Langmuir-Blodgett and Intercalation Techniques.

We demonstrate the formation of a well-organized thin film of two-dimensional (2D) layered (C18H37NH3)2PbI4 hybrid perovskite by immersing octadecyl amine (ODA) Langmuir-Blodgett (LB) films in an aqueous solution of PbI2/HI. The immersed films exhibit a sharp absorption band at 486 nm (2.55 eV), which is assigned to the excitonic absorption. The film exhibits a bright green emission under ultraviolet light at room temperature. The photoluminescence spectrum has a distinct peak at 497 nm (2.49 eV) and is a mirror image of the absorption spectrum. X-ray diffraction (XRD) analyses reveal that the film has a bilayer-like structure with a d-spacing of 6.4 nm, which is equal to that of a (C18H37NH3)2PbI4 perovskite single crystal with a quantum well (QW) structure. Only intense peaks of the (0 0 l) (l = 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, and 24) reflections are observed in the out-of-plane XRD pattern, indicating that the c axis is vertically oriented with respect to the substrate surface, and the orientational order is remarkably high. Fourier transform infrared spectroscopy reveals that the ODA molecules are protonated in the PbI2/HI solution. These results suggest that the nitrogen atoms of the ODA molecules in the film are protonated in the PbI2/HI solution, and then, inorganic layers of the PbI6 octahedra are intercalated in the alkyl ammonium film to neutralize the positive charge and form a QW structure. Fluorescence microscopy observation reveals that the 2D layered (C18H37NH3)2PbI4 film has a relatively uniform surface, reflecting the well-organized layered structure of the base material (ODA LB film). Because the intercalation process can be applied to various metal cations and halogen anions, we believe that the proposed technique will aid in the development of highly efficient 2D layered organic-inorganic hybrid perovskite materials.

Palladium-Catalyzed Mizoroki-Heck and Copper-Free Sonogashira Coupling Reactions in Water Using Thermoresponsive Polymer Micelles.

A few kinds of thermoresponsive diblock copolymers have been synthesized and utilized for palladium-catalyzed coupling reactions in water. Poly(N-isopropylacrylamide) (PNIPAAm) and poly(N,N-diethylacrylamide) (PDEAAm) are employed for thermoresponsive segments and poly(sodium 4-styrenesulfonate) (PSSNa) and poly(sodium 2-acrylamido-methylpropanesulfonate) (PAMPSNa) are employed for hydrophilic segments. Palladium-catalyzed Mizoroki-Heck reactions are performed in water and the efficiency of the extraction process is studied. More efficient extraction was observed for the PDEAAm copolymers when compared with the PNIPAAm copolymers and conventional surfactants. In the study of the Sonogashira coupling reactions in water, aggregative precipitation of the products was observed. Washing the precipitate with water gave the product with satisfactory purity with a good yield.

Bioresorbable porous ß-tricalcium phosphate chelate-setting cements with poly(lactic-co-glycolic acid) particles as pore-forming agent: fabrication, material properties, cytotoxicity, and in vivo evaluation.

Calcium-phosphate cements (CPCs) have been used as bone filling materials in orthopaedic surgery. However, CPCs are set using an acid-base reaction, and then change into stable hydroxyapatite (HAp) in a living body. Therefore, we developed bioresorbable chelate-setting ß-tricalcium phosphate (ß-TCP) cements based on surface modifications of inositol phosphate (IP6). In order to improve the bioresorbability, we fabricated IP6/ß-TCP cements hybridized with poly(lactic-co-glycolic acid) (PLGA) particles as a pore-forming agent. The compressive strengths of the cements with the amounts of 5 and 10 mass% PLGA particles were 23.2 and 22.8 MPa, respectively. There was no significant difference from cements without PLGA (23.4 MPa). The setting times of the cement specimens with PLGA particles (30 min) were a little longer than those without PLGA particles (26.3 min). The lack of cytotoxicity of the cement specimens was confirmed using osteoblast-like cells (MC3T3-E1). Cylindrical defects were made by drilling into the tibia of mini-pigs and injecting the prepared cement pastes into the defects. Twelve weeks after implantation the specimens were stained with toluidine blue and histologically evaluated. Histological evaluation of cement specimens with PLGA particles showed enhanced bioresorbability. Newly-formed bone was also observed inside cement specimens with PLGA particles. The IP6/ß-TCP cement specimens with PLGA particles had excellent material properties, such as injectability, compressive strength, high porosity, no cytotoxicity in vitro, bioresorption and bone formation abilities in vivo. Organic-inorganic hybridized CPCs are expected to be valuable as novel biodegradable paste-like artificial bone fillers.

Simple and Fast One-Pot Cellulose Gel Preparation in Aqueous Pyrrolidinium Hydroxide Solution-Cellulose Solvent and Antibacterial Agent.

Cellulose is the main component of biomass and is the most abundant biopolymer on earth; it is a non-toxic, low-cost material that is biocompatible and biodegradable. Cellulose gels are receiving increasing attention as medical products, e.g., as wound dressings. However, the preparation of cellulose hydrogels employing unmodified cellulose is scarcely reported because of the cumbersome dissolution of cellulose. In previous studies, we developed the new promising cellulose solvent N-butyl-N-methylpyrrolidinium hydroxide in an aqueous solution, which can dissolve up to 20 wt% cellulose within a short time at room temperature. In this study, we employed this solvent system and investigated the gelation behavior of cellulose after crosslinker addition. The swelling behavior in water (swelling ratio, water uptake), the mechanical properties under compression, and the antibacterial activity against Escherichia coli and Bacillus subtilis were investigated. We have developed a simple and fast one-pot method for the preparation of cellulose gels, in which aqueous pyrrolidinium hydroxide solution was acting as the solvent and as an antibacterial reagent. The pyrrolidinium hydroxide content of the gels was controlled by adjustment of the water volume employed for swelling. Simple recovery of the solvent system was also possible, which makes this preparation method environmentally benign.

Oligoether/Zwitterion Diblock Copolymers: Synthesis and Application as Cathode-Coating Material for Li Batteries.

Poly (ethylene oxide) (PEO) has been investigated as an ion-conductive matrix for several decades due to its excellent properties. However, further improvements are needed to enable a PEO-based ion-conductive matrix for practical applications. In order to develop novel solid polymer electrolytes based on zwitterions, we synthesized diblock copolymers (PPEGMA-b-SPBs) with oligoether and zwitterionic side-chains and evaluated their physico-chemical properties. PPEGMA-b-SPBs with various unit ratios were synthesized by RAFT polymerization. PPEGMA-b-SPBs with/without LiTFSA exhibited two distinct glass transition temperatures regardless of the unit ratio of PEGMA and SPB. AFM observations clearly revealed phase-separated structures. The ionic conductivity of PPEGMA-b-SPBs increased even at a high salt concentrations such as [EO]:[Li] = 6:1 and was over 10-5 S cm-1 at 25 °C. This tendency is unusual in a PEO matrix. The oxidation stability of PPEGMA-b-SPBs was about 5.0 V vs. Li/Li+, which is a higher value than that of PEO. The improvement of the electrochemical properties is attributed to the introduction of the SPB block into the block copolymers. PPEGMA-b-SPBs were evaluated as cathode-coating materials for Li batteries. The discharge capacity and coulombic efficiency of the cells employing the cathode (LiNi1/3Mn1/3Co1/3O2 (NMC)) coated with the block copolymers were much higher than those of the cell employing the pristine cathode at the 50th cycle in the cut-off voltage range of 3.0-4.6 V.

Perpendicularly oriented 2D perovskite thin films prepared using the bar-coating method and DMSO additive.

A 2D perovskite incorporating an amine moiety with a carboxy group exhibited orientation changes as the amount of DMSO additive varied. The degree of perpendicular orientation was increased by optimizing the amount of DMSO additive, while using the bar-coating method. Moreover, film thickness and the ratio of perpendicular orientation exhibited a positive correlation.

Simple one-step synthesis of a two-dimensional perovskite consisting of perfluoroalkyl-based ammonium spacers using acetone as the solvent.

Acetone, regarded as a poor solvent for perovskite materials, was found to be suitable for synthesis of the perfluoroalkyl-based two-dimensional (2D) perovskite (C3F7CH2NH3)2PbBr4. One-step synthesis gave this material as a pure phase exhibiting quantum- and dielectric-confinement effects. However, N,N-dimethylformamide (DMF), a traditional perovskite solvent, did not produce these properties.

Synthesis and investigation of sulfonated poly(p-phenylene)-based ionomers with precisely controlled ion exchange capacity for use as polymer electrolyte membranes.

To achieve precise control of sulfonated polymer structures, a series of poly(p-phenylene)-based ionomers with well-controlled ion exchange capacities (IECs) were synthesised via a three-step technique: (1) preceding sulfonation of the monomer with a protecting group, (2) nickel(0) catalysed coupling polymerisation, and (3) cleavage of the protecting group of the polymers. 2,2-Dimethylpropyl-4-[4-(2,5-dichlorobenzoyl)phenoxy]benzenesulfonate (NS-DPBP) was synthesised as the preceding sulfonated monomer by treatment with chlorosulfuric acid and neopentyl alcohol. NS-DPBP was readily soluble in various organic solvents and stable during the nickel(0) catalysed coupling reaction. Sulfonated poly(4-phenoxybenzoyl-1,4-phenylene) (S-PPBP) homopolymer and seven types of random copolymers (S-PPBP-co-PPBP) with different IECs were obtained by varying the stoichiometry of NS-DPBP. The IECs and weight average molecular weights (M ws) of ionomers were in the range of 0.41-2.84 meq. g-1 and 143 000-465 000 g mol-1, respectively. The water uptake, proton conductivities, and water diffusion properties of ionomers exhibited a strong IEC dependence. Upon increasing the IEC of S-PPBP-co-PPBPs from 0.86 to 2.40 meq. g-1, the conductivities increased from 6.9 × 10-6 S cm-1 to 1.8 × 10-1 S cm-1 at 90% RH. S-PPBP and S-PPBP-co-PPBP (4 : 1) with IEC values >2.40 meq. g-1 exhibited fast water diffusion (1.6 × 10-11 to 8.0 × 10-10 m2 s-1), and were comparable to commercial perfluorosulfuric acid polymers. When fully hydrated, the maximum power density and the limiting current density of membrane electrode assemblies (MEAs) prepared with S-PPBP-co-PPBP (4 : 1) were 712 mW cm-2 and 1840 mA cm-2, respectively.

Development of a novel cellulose solvent based on pyrrolidinium hydroxide and reliable solubility analysis.

Cellulose processing remains a challenge as it is insoluble in water and common organic solvents. Ionic liquids (ILs) are organic salts with a melting point below 100 °C and are known for their excellent solvent properties. Unlike common organic solvents, which can form toxic or flammable vapours due to their high volatility, ILs can be considered as more environmentally friendly due to their negligible vapour pressure and flame retardant properties. We found that N-butyl-N-methylpyrrolidinium hydroxide enables rapid dissolution of up to 20 wt% Avicel® cellulose at 25 °C in aqueous solution (50 wt% water), making it the first pyrrolidinium-based salt capable of dissolving cellulose. Furthermore, solubility studies are currently carried out mainly with the naked eye, microscopy or spectroscopy. The former is a subjective method because it depends on the observer, and particles at the micro-level cannot be seen with the human eye. Microscopic and spectroscopic analyses are suitable for the verification of solubility; however, the acquisition costs of the instruments are high, and sample preparation is time-consuming. We propose that turbidity is a suitable measure for solubility, and investigated a simple and fast method to evaluate cellulose solubility in aqueous N-butyl-N-methylpyrrolidinium hydroxide by employing a turbidimeter which was compared with microscopy and ocular (eye) observation. In this study, we have not only found a promising new solvent for cellulose processing, but also offer a reliable solubility analysis.

Novel Organic-Inorganic Perovskite Compounds Having Phosphonium Groups.

Organic-inorganic perovskites are composed of organic cations and [PbX6]4- octahedra, and the properties change depending on the type of organic cations. To identify the effect of organic cations and control the properties of the perovskite, thin films were prepared using quaternary alkylammonium and quaternary alkylphosphonium cations, which have big steric effects. A big steric effect can generate the distortion of [PbX6]4- octahedra leading to changes in properties. A thin film of a Pb-based organic-inorganic perovskite having quaternary alkylphosphonium cations was prepared for the first time. An exciton absorption was observed at a lower wavelength than other perovskites prepared from primary and quaternary ammonium salts. The perovskite with phosphonium groups was thermally stable compared with ammonium groups.

Effect of ß-Cyclodextrin on Physicochemical Properties of an Ionic Liquid Electrolyte Composed of N-Methyl-N-Propylpyrrolidinium bis(trifluoromethylsulfonyl)amide.

Ionic liquids (ILs) are promising electrolyte materials for developing next-generation rechargeable batteries. In order to improve their properties, several kinds of additives have been investigated. In this study, ß-cyclodextrin (ß-CD) was chosen as a new additive in IL electrolytes because it can form an inclusion complex with bis(trifluoromethylsulfonyl)amide (TFSA) anions. We prepared the composites by mixing N-methyl-N-propylpyrrolidinium bis(trifluoromethylsulfonyl)amide/LiTFSA and a given amount of triacetyl-ß-cyclodextrin (Acß-CD). The thermal behaviors and electrochemical properties of the composites were analyzed by several techniques. In addition, pulse field gradient NMR measurements were conducted to determine the self-diffusion coefficients of the component ions. The addition of Acß-CD to the IL electrolytes results in the decrease in the conductivity value and the increase in the viscosity value. In contrast, the addition of Acß-CD to the IL electrolytes induced an improvement in the anodic stability because of the formation of an inclusion complex between the Acß-CD and TFSA anions. CDs are potential candidates as additives in IL electrolytes for electrochemical applications.

Eco-Friendly Push-Coated Polymer Solar Cells with No Active Material Wastes Yield Power Conversion Efficiencies over 5.5.

Push-coating is a simple process that can be employed for extremely low-cost polymer electronic device production. Here, we demonstrate its application to the fabrication of poly(2,7-carbazole- alt-dithienylbenzothiadiazole) (PCDTBT):[6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) active layers processed in air, yielding similar photovoltaic performances as thermally annealed spin-coated thin films when used in inverted polymer solar cells (PSCs). During push-coating, the polydimethylsiloxane layer temporarily traps the deposition solvent, resulting in simultaneous film formation and solvent annealing effect. This removes the necessity for a postdeposition thermal annealing step which is required for spin-coated PSCs to produce high photovoltaic performances. Optimized PSC active layers are produced with a push-coating time of 5 min at room temperature with 20 times less hazardous solvent and 40 times less active material than spin-coating. Annealed spin-coated active layers and active layers push-coated for 5 min both produce average power conversion efficiencies (PCEs) of 5.77%, while those push-coated for a shorter time of 1 min yield a slightly lower value of 5.59%. We demonstrate that, despite differences in their donor:acceptor vertical concentration gradients, unencapsulated PCDTBT:PC71BM active layers push-coated for 1 min produce PSCs with similar operational stability and upscaling capacity as thermally annealed spin-coated ones. As fast device fabrication can be achieved with short-time push-coating, we further demonstrate the potential of this deposition technique by manufacturing push-coated PSC-based semitransparent photovoltaic devices with a PCE of 4.23%, relatively neutral colors and an average visible transparency of 40.2%. Our work thus confirms that push-coating is not limited to the widely employed poly(3-hexylthiophene-2,5-diyl) but can also be used with low band gap copolymers and opens the path to low-cost and eco-friendly, yet efficient and stable PSCs.

Solvent polarity effects on supramolecular chirality of a polyfluorene-thiophene copolymer.

This study demonstrates the supramolecular chirality control of a conjugated polymer via solvent polarity. We designed and synthesized a chiral polyfluorene-thiophene copolymer having two different chiral side chains at the 9-position of the fluorene unit. Chiral cyclic and alkyl ethers with different polarities were selected as the chiral side chains. The sign of the circular dichroism spectra in the visible wavelength region was affected by the solvent system, resulting from the change of supramolecular structure. The estimation of the solubility parameter revealed that the solubility difference of the side chains contributed to the change of the circular dichroism sign, which was also observed in spin-coated films prepared from good solvents having different polarities.

Tuning the Structures and Optical Properties of Perovskites by Varying the Alkylamine Type and Chain Length.

Organic-inorganic perovskites, (RNH3)2PbX4, have attracted much attention as one of the most promising light-harvesting and light-emitting materials. The present work investigated the steric effects of the organic parts on the perovskites by varying the alkylamine type and chain length. Primary, secondary, and tertiary amines with various chain lengths were introduced into organic-inorganic perovskites. Extending the chain length raised the phase transition point and shortened the absorption wavelength. In addition, the introduction of secondary and tertiary amines resulted in red- and blue-shifting of the absorption peaks, respectively.

Brønsted acidic ionic liquids for cellulose hydrolysis in an aqueous medium: structural effects on acidity and glucose yield.

The conversion of cellulose into valuable chemicals has attracted much attention, due to the concern about depletion of fossil fuels. The hydrolysis of cellulose is a key step in this conversion, for which Brønsted acidic ionic liquids (BAILs) have been considered promising acid catalysts. In this study, using BAILs with various structures, their acidic catalytic activity for cellulose hydrolysis assisted by microwave irradiation was assessed using the Hammett acidity function (H 0) and theoretical calculations. The glucose yields exceeded 10% when the H 0 values of the BAIL aqueous solutions were below 1.5. The highest glucose yield was about 36% in 1-(1-octyl-3-imidazolio)propane-3-sulfonate (Oimps)/sulfuric acid (H2SO4) aqueous solution. A long alkyl side chain on the imidazolium cation, which increased the hydrophobicity of the BAILs, enhanced the glucose yield.

Orientation Control of Two-Dimensional Perovskites by Incorporating Carboxylic Acid Moieties.

Two-dimensional perovskite compounds, (RNH3)2PbX4, have attracted much attention as quantum confinement materials. To achieve suitable orientation and exciton properties for optical applications, carboxy groups were introduced into the ammonium cations of two-dimensional perovskite compounds, which formed dimer structures based on the hydrogen bonding by the carboxy moieties. This structural organization allowed control of the layer orientation for favorable solar cells and thermal stability of the perovskites, while maintaining quantum confinement effects.

Use of a High-Performance Poly(p-phenylene)-Based Aromatic Hydrocarbon Ionomer with Superacid Groups in Fuel Cells under Low Humidity Conditions.

Aromatic ionomers with perfluoroalkyl sulfonic acid groups for fuel cell applications have been prepared mostly by the post-functionalization method. Herein, we present a direct polymerization method using a novel monomer with a perfluorosulfonic acid group to control the amount and position of the sulfonic acid groups. A poly(p-phenylene)-based aromatic hydrocarbon ionomer bearing a pendant perfluorosulfonic acid group in a substituent at the 2-position is synthesized by Ni(0)-catalyzed coupling polymerization. The direct polymerization provides M n values of up to 169 000 with a highly controlled molecular structure and allows the formation of thin membranes. These ionomers were found to combine the positive features of perfluorinated and aromatic hydrocarbon ionomers, and these thin membranes with a relatively high ion exchange capacity showed high proton conductivity and excellent fuel cell performance (907 mW cm-2 even at 80 °C and 30% RH) under low humidity conditions compared with other reported aromatic hydrocarbon ionomers.

Synthesis of optically active regioregular polythiophenes and their self-organization at the air-water interface.

Regioregular polythiophenes containing an optically active substituent in the third position of the thiophene ring, head-to-tail poly(3-[2-((S)-1-methyloctyloxy)ethyl]thiophene)s (HT-P(S)MOETs), were synthesized using highly reactive zinc. For comparison, HT-P(R)MOET and achiral HT-P(±)MOET also were synthesized from R-type monomers and racemic monomers, respectively. The HT-PMOET possessed greater than 95% head-to-tail coupling with a weight-average molecular weight (Mw) between 1.96 × 10(4) and 2.94 × 10(4). The polymers were characterized using (1)H and (13)C NMR, optical rotatory power measurements, circular dichroism (CD), and UV-vis spectroscopy. X-ray diffraction patterns of the cast films demonstrated that regioregular HT-PMOET possessed a strong tendency to self-assemble into highly ordered, crystalline structures. The HT-P(S)MOET and HT-P(R)MOET showed strong Cotton effects, while HT-P(±)MOET showed very weak Cotton effects. The presence of a circular dichroism effect indicated that the side chain chirality induced optical activity in poly(thiophene) main chains. The monolayer formation of HT-PMOET spread on the water surface was characterized using a pressure-area (π-A) isotherm. The molecular areas of HT-P(S)MOET and HT-P(R)MOET molecules on the water surface were 33.5 and 32.9 Å(2), respectively, at 10 °C, which were larger than that of HT-P(±)MOET (27.9 Å(2)), suggesting that optically active HT-PMOET expanded because of the chiral repulsion between side chains. Multilayer films of HT-PMOET were prepared by repeating horizontal deposition of the monolayer on the water surface. The multilayer films of optically active HT-PMOET obtained showed stronger Cotton effects than did the cast films. In addition, electrical conductivities of HT-PMOET multilayer films were superior to those of spin-coated films. Head-to-tail poly(3-[2-((S)-1-methylpropyloxy)ethyl]thiophene) (HT-P(S)MPET), which contained shorter side chain lengths compared to HT-P(S)MOET, also was synthesized. The CD intensities of HT-P(S)MPET multilayer films were smaller than those of HT-P(S)MOET multilayer films, suggesting that the optically active side-chain length is critically important to the optically active self-assembly.