Effects of exposure length, cortical and trabecular bone contact areas on primary stability of infrazygomatic crest mini-screws at different insertion angles.

BACKGROUND: The infrazygomatic crest mini-screw has been widely used, but the biomechanical performance of mini-screws at different insertion angles is still uncertain. The aim of this study was to analyse the primary stability of infrazygomatic crest mini-screws at different angles and to explore the effects of the exposure length (EL), screw-cortical bone contact area (SCA), and screw-trabecular bone contact area (STA) on this primary stability. METHODS: Ninety synthetic bones were assigned to nine groups to insert mini-screws at the cross-combined angles in the occlusogingival and mesiodistal directions. SCA, STA, EL, and lateral pull-out strength (LPS) were measured, and their relationships were analysed. Twelve mini-screws were then inserted at the optimal and poor angulations into the maxillae from six fresh cadaver heads, and the same biomechanical metrics were measured for validation. RESULTS: In the synthetic-bone test, the LPS, SCA, STA, and EL had significant correlations with the angle in the occlusogingival direction (rLPS = 0.886, rSCA = -0.946, rSTA = 0.911, and rEL= -0.731; all P < 0.001). In the cadaver-validation test, significant differences were noted in the LPS (P = 0.011), SCA (P = 0.020), STA (P = 0.004), and EL (P = 0.001) between the poor and optimal angulations in the occlusogingival direction. The STA had positive correlations with LPS (rs = 0.245 [synthetic-bone test] and r = 0.720 [cadaver-validation test]; both P < 0.05). CONCLUSIONS: The primary stability of the infrazygomatic crest mini-screw was correlated with occlusogingival angulations. The STA significantly affected the primary stability of the infrazygomatic crest mini-screw, but the SCA and EL did not.

Antagonistic Effect of Jiawei Shengjiang San on a Rat Model of Diabetic Nephropathy: Related to EGFR/MAPK3/1 Signaling Pathway.

We aimed to delve into the mechanisms underpinning Jiawei Shengjiang San's (JWSJS) action in treating diabetic nephropathy and deploying network pharmacology. Employing network pharmacology and molecular docking techniques, we predicted the active components and targets of JWSJS and constructed a meticulous "drug-component-target" network. Gene ontology (GO) and Kyoto encyclopedia of genes and genomes (KEGG) enrichment analyses were utilized to discern the therapeutic pathways and targets of JWSJS. Autodock Vina 1.2.0 was deployed for molecular docking verification, and a 100-ns molecular dynamics simulation was conducted to affirm the docking results, followed by in vivo animal verification. The findings revealed that JWSJS shared 227 intersecting targets with diabetic nephropathy, constructing a protein-protein interaction network topology. KEGG enrichment analysis denoted that JWSJS mitigates diabetic nephropathy by modulating lipids and atherosclerosis, the PI3K-Akt signaling pathway, apoptosis, and the HIF-1 signaling pathway, with mitogen-activated protein kinase 1 (MAPK1), MAPK3, epidermal growth factor receptor (EGFR), and serine/threonine-protein kinase 1 (AKT1) identified as collective targets of multiple pathways. Molecular docking asserted that the core components of JWSJS (quercetin, palmitoleic acid, and luteolin) could stabilize conformation with three pivotal targets (MAPK1, MAPK3, and EGFR) through hydrogen bonding. In vivo examinations indicated notable augmentation in body weight and reductions in glycated serum protein (GSP), low-density lipoprotein cholesterol (LDL-C), uridine triphosphate (UTP), and fasting blood glucose (FBG) levels due to JWSJS. Electron microscopy coupled with hematoxylin and eosin (HE) and Periodic acid-Schiff (PAS) staining highlighted the potential of each treatment group in alleviating kidney damage to diverse extents, exhibiting varied declines in p-EGFR, p-MAPK3/1, and BAX, and increments in BCL-2 expression in the kidney tissues of the treated rats. Conclusively, these insights suggest that the protective efficacy of JWSJS on diabetic nephropathy might be associated with suppressing the activation of the EGFR/MAPK3/1 signaling pathway and alleviating renal cell apoptosis.

Interfragmentary compression force and fixation stability of lateral tibial plateau fractures in normal and osteoporotic bones.

Lateral platform collapse in fixations of lateral tibial plateau fractures (TPFs) using either double-lag screws fixation (DSF) or locking-plate fixation (LPF) is not rare. This study aimed to explore the effect of enhancing the interfragmentary compression force (IFCF) on fixation stability in lateral TPFs in normal and osteoporotic bones using finite element analysis. Finite element models of DSF in normal bone and LPF in normal and osteoporotic bones were established to simulate the fixations of lateral TPF. After model validation, axial compressive forces of 500, 1000, 1500, and 2500 N to the tibial plateau along with an IFCF of 0, 100, 200, and 300 N were applied. The maximum axial micromotion of the lateral fragment (MAM-LF), maximal translational micromotion of the lateral fragment (MTM-LF), peak von Mises stress (VMS), and peak equivalent elastic strain of the lateral fragment (EES-LF) were evaluated. The MAM-LF showed a decreasing trend as the IFCF increased in all models. For DSF models, the peak VMS of implants increased as the IFCF increased when the axial loads were 500 and 1000 N. The peak EES-LF decreased as the IFCF increased under axial loads of 1000, 1500, and 2500 N. For the normal and osteoporotic LPF models, the peak VMS of the implants decreased as the IFCF increased. Peak EES-LF decreased as IFCF increased. In conclusion, enhancing IFCF was beneficial in improving the fixation stability of lateral TPF. The optimal IFCF for DSF and LPF should be as high as reasonably feasible.

Comparison of biomechanical parameters of two Chinese cervical spine rotation manipulations based on motion capture and finite element analysis.

Objective: The purpose of this study was to obtain the stress-strain of the cervical spine structure during the simulated manipulation of the oblique pulling manipulation and the cervical rotation-traction manipulation in order to compare the mechanical mechanism of the two manipulations. Methods: A motion capture system was used to record the key kinematic parameters of operating the two manipulations. At the same time, a three-dimensional finite element model of the C0-T1 full healthy cervical spine was established, and the key kinematic parameters were loaded onto the finite element model in steps to analyze and simulate the detailed process of the operation of the two manipulations. Results: A detailed finite element model of the whole cervical spine including spinal nerve roots was established, and the validity of this 3D finite element model was verified. During the stepwise simulation of the two cervical spine rotation manipulations to the right, the disc (including the annulus fibrosus and nucleus pulposus) and facet joints stresses and displacements were greater in the oblique pulling manipulation group than in the cervical rotation-traction manipulation group, while the spinal cord and nerve root stresses were greater in the cervical rotation-traction manipulation group than in the oblique pulling manipulation group. The spinal cord and nerve root stresses in the cervical rotation-traction manipulation group were mainly concentrated in the C4/5 and C5/6 segments. Conclusion: The oblique pulling manipulation may be more appropriate for the treatment of cervical spondylotic radiculopathy, while cervical rotation-traction manipulation is more appropriate for the treatment of cervical spondylosis of cervical type. Clinicians should select cervical rotation manipulations for different types of cervical spondylosis according to the patient's symptoms and needs.

In silico biomechanical analysis of poller screw-assisted small-diameter intramedullary nail in the treatment of distal tibial fractures.

Objective: To evaluate the biomechanical effects of Poller screws (PS) combined with small-diameter intramedullary nails in the treatment of distal tibial fractures at different locations and on different planes. Methods: Nine finite element (FE) models were used to simulate the placement of the intramedullary nail (IMN) and the PS for distal tibial fractures. Structural stiffness and interfragmentary motion (IFM) through the fracture were investigated to assess the biomechanical effects of the PS. The allowable stress method was used to evaluate the safety of the construct. Results: With the axial load of 500 N, the mean axial stiffness of IMN group was 973.38 ± 95.65 N/mm, which was smaller than that at positions A and B of the coronal group and sagittal group (p < 0.05). The shear IFM of the IMN group was 2.10 ± 0.02 mm, which were smaller than that at positions A and B of the coronal group and sagittal group (p < 0.05). Under physiological load, the stresses of all internal fixation devices and the nail-bone interface were within a safe range. Conclusion: In the treatment of distal tibial fractures, placing the PS in the proximal fracture block can obtain better biomechanical performance. The IMN fixation system can obtain higher structural stiffness and reduce the IFM of the fracture end by adding PS.

Identification of key genes for IgA nephropathy based on machine learning algorithm and correlation analysis of immune cells.

INTRODUCTION: The pathogenesis and progression mechanism of Immunoglobulin A nephropathy (IgAN) is not fully understood. There is a lack of panoramic analysis of IgAN immune cell infiltration and algorithms that are more efficient and accurate for screening key pathogenic genes. METHODS: RNA sequencing (RNA-seq) data sets on IgAN were downloaded from the Gene Expression Omnibus (GEO) database, including GSE93798, GSE35489, and GSE115857. The RNA-seq data set of kidney tissue as control samples were downloaded from the Genotype-Tissue Expression (GTEx) database. Three machine learning algorithms-weighted gene co-expression network analysis (WGCNA), least absolute shrinkage and selection operator (LASSO), and support vector machine-were used to identify the key pathogenic gene sets of the IgAN disease. The ssGSEA method was applied to calculate the immune cell infiltration (ICI) of IgAN samples, whereas the Spearman test was used for correlation analysis. The receiver operator characteristic curve (ROC) was used to evaluate the diagnostic efficacy of key genes. The correlation between the key genes and ICI was analyzed using the Spearman test. RESULTS: A total of 177 genes were screened out as differentially expressed genes (DEGs) for IgAN, including 135 up-regulated genes and 42 down-regulated genes. The DEGs were significantly enriched in the inflammatory- or immune-related pathways (gene sets). Activating transcription factor 3 (AFT3), C-X-C Motif Chemokine Ligand 6 (CXCL6), and v-fos FBJ murine osteosarcoma viral oncogene homolog B (FOSB) were identified using WGCNA, support vector machine, and LASSO algorithms. These three genes revealed good diagnostic efficacy in the training and test cohorts. The CXCL6 expression positively correlated with activated B cells and memory B cells. CONCLUSION: ATF3, FOSB, and CXCL6 genes were identified as potential biomarkers of IgAN. These three genes exhibited good diagnostic efficacy for IgAN. We described the landscape of immune cell infiltration for IgAN. Activated B cells and memory B cells were more highly expressed in the IgAN samples than in the control samples. CXCL6 seems crucial to the pathogenesis of IgAN and may induce IgAN by enriching immune cells. Our study may contribute to developing CXCL6 inhibitors that target B cells for IgAN therapy.

Combination therapy with DHA and BMSCs suppressed podocyte injury and attenuated renal fibrosis by modulating the TGF-ß1/Smad pathway in MN mice.

Artemisinin has immunomodulatory, anti-inflammatory, and antifibrotic effects. Some studies have demonstrated that artemisinins have a protective effect on the kidney. DHA is a derivative of artemisinin and has effects similar to those of artemisinin. Human bone marrow-derived mesenchymal stem cells (BMSCs) accelerate renal repair following acute injury. In the study, we investigated the effects of combination therapy with DHA and BMSCs on membranous nephropathy (MN) mice. The 24-h urinary protein, serum total cholesterol (TC) and triglyceride (TG) levels, and renal histopathology, were measured to evaluate kidney damage. Anti-PLA2R, IgG, and complement 3 (C3) were detected by ELISA. The expression levels of the podocyte injury-related proteins were analyzed by immunohistochemistry. The protein expression levels of α-SMA, ED-1, TGF-ß1, p-Smad2, and p-Smad3 were detected by western blot to analyze renal fibrosis and its regulatory mechanism. Results showed that combination therapy with DHA and BMSCs significantly ameliorated kidney damage in MN model mice by decreasing the levels of 24 h urinary protein, TC and TG. This combination therapy also improved renal histology and reduced the expression of IgG and C3 in the glomerulus. In addition, this combination therapy decreased the expression of podocin and nephrin and relieved renal fibrosis by downregulating α-SMA and ED-1. Furthermore, this combination therapy suppressed TGF-ß1 expression and Smad2/3 phosphorylation. This result (i.e., this combination therapy inhibited the TGF-ß1/Smad pathway) was also supported in vitro. Taken together, combination therapy with DHA and BMSCs ameliorated podocyte injury and renal fibrosis in MN mice by downregulating the TGFß1/Smad pathway.

Optimal Design and Biomechanical Analysis of a Biomimetic Lightweight Design Plate for Distal Tibial Fractures: A Finite Element Analysis.

The treatment of fractures of the distal tibia can be problematic due to the insubstantial soft-tissue covering this part of the anatomy. This study investigates a novel strategy for minimally invasive plate osteosynthesis of distal tibia fractures called bionic lightweight design plating. Following the structure of the animal trabecular bone, we utilized topological mathematical methods to redesign the material layout of the internal fixation device to fulfill the desired lightweight design within given boundary conditions. The results showed that this method can maintain the same stability of the construct as the original plate after a reduction in the original volume by 30%, and the differences in strain energy of plates and maximum node displacement of constructs between the constructs [RP construct vs. LP construct] were not statistically significant (p > 0.05). In the safety assessment of the constructs, the peak stress of plates between constructs was found to not be statistically significantly different under a doubled physiological load (p > 0.05). The average stress of the plates' elements exceeding the allowable stress was analyzed, and no statistically significant differences were found between the two constructs under axial compression stress conditions (p > 0.05). The average stress of the plates' elements in the redesigned plating construct under torsional stress conditions was 3.08% less than that of the locked plating construct (p < 0.05). Under the double physiological load condition, 89% of the elements of the plate in the redesigned plating construct and 85% of the elements of the plate in the locked plating construct were lower than the maximum safe stress of the plate, which was 410 MPa (secondary allowable stresses). That reminds us the topology optimization offer a possible way to improve the capacity of soft tissue protection while ensuring the safety of the RP construct by reducing the volume of the implants.

[Effect of moxibustion on renal function and hypercoagulable state in patients with idiopathic membranous nephropathy of low to medium risk with spleen-kidney deficiency and blood stasis].

OBJECTIVE: To compare the effect of moxibustion combined with basic treatment and simple basic treatment on the clinical symptoms, renal function and hypercoagulable state in patients with idiopathic membranous nephropathy (IMN) of low to medium risk with spleen-kidney deficiency and blood stasis. METHODS: A total of 60 patients with IMN of low to medium risk with spleen-kidney deficiency and blood stasis were randomized into an observation group (30 cases, 2 cases dropped off) and a control group (30 cases, 1 case dropped off). In the control group, the conventional basic treatment of anti-hypertension, regulating blood lipid and anti-coagulation was adopted. On the basis of the control group, moxibustion was applied at Shenshu (BL 23), Pishu (BL 20), Guanyuan (CV 4), Zusanli (ST 36) and Sanyinjiao (SP 6) in the observation group, once a day, 5 days a week continuously with 2 day interval. The treatment of 6 months was required in the both groups. Before treatment and 3 and 6 months into treatment, the total TCM syndrome score, the renal function indexes (24-hour urinary protein quantity [UTP], albumin [ALB], urea nitrogen [BUN] and creatinine [Scr]), the blood coagulation indexes (fibrinogen [FIB], D-Dimer [D-D], p-selection and von Willebrand factor [vWF]), total cholesterol (TC) and triacylglycerol (TG) levels were observed, and the therapeutic efficacy was evaluated on 3 and 6 months into treatment in the two groups. RESULTS: The effective rates of 3 and 6 months into treatment were 78.6% (22/28) and 89.3% (25/28) in the observation group, which were higher than 62.1% (18/29) and 75.9% (22/29) in the control group respectively (P<0.05). On 3 and 6 months into treatment, the total TCM syndrome scores were decreased compared before treatment in the both groups (P<0.05), and those in the observation group were lower than the control group (P<0.05). On 3 months into treatment, the levels of UTP, FIB, D-D, P-selection and vWF were decreased (P<0.05), the level of ALB was increased (P<0.05) compared before treatment in the observation group; the levels of UTP and FIB were decreased compared before treatment in the control group (P<0.05); the level of ALB in the observation group was higher than that in the control group (P<0.05), the levels of FIB and vWF in the observation group were lower than those in the control group (P<0.05). On 6 months into treatment, the levels of UTP, FIB, D-D, P-selection, vWF, TC and TG were decreased (P<0.05), the levels of ALB were increased (P<0.05) compared before treatment in the both groups (P<0.05); the levels of UTP, FIB, D-D, P-selection, vWF, TC and TG in the observation group were lower than those in the control group, the level of ALB in the observation group was higher than that in the control group (P<0.05). CONCLUSION: Moxibustion combined with basic treatment can effectively improve the clinical symptoms, renal function and renal microcirculation in patients with idiopathic membranous nephropathy of low to medium risk with spleen-kidney deficiency and blood stasis, the therapeutic effect is superior to the simple basic treatment.

Mechanical Parameters and Trajectory of Two Chinese Cervical Manipulations Compared by a Motion Capture System.

Objective: To compare the mechanical parameters and trajectory while operating the oblique pulling manipulation and the cervical rotation-traction manipulation. Methods: An experimental research measuring kinematics parameter and recording motion trajectories of two cervical manipulations were carried out. A total of 48 healthy volunteers participated in this study, who were randomly divided into two groups of 24 representing each of the two manipulations. A clinician performed two manipulations in two groups separately. A motion capture system was used to monitor and analyze kinematics parameters during the operation. Results: The two cervical manipulations have similar thrust time, displacement, mean velocity, max velocity, and max acceleration. There were no significant differences in active and passive amplitudes between the two cervical rotation manipulations. The thrust amplitudes of the oblique pulling manipulation and the cervical rotation-traction manipulation were 5.735 ± 3.041° and 2.142 ± 1.742°, respectively. The thrust amplitudes of the oblique pulling manipulation was significantly greater than that of the cervical rotation-traction manipulation (P < 0.001). Conclusion: Compared with the oblique pulling manipulation, the cervical rotation-traction manipulation has a less thrust amplitudes.

Bone depth and thickness of different infrazygomatic crest miniscrew insertion paths between the first and second maxillary molars for distal tooth movement: A 3-dimensional assessment.

INTRODUCTION: This research aimed to measure the bone depth and thickness of different insertion paths for safe placement of infrazygomatic crest miniscrews between the first (U6) and second maxillary molars (U7) by 3-dimensional (3D) reconstruction and to explore their clinical significance. METHODS: Cone-beam computed tomography data from 36 adult orthodontic patients were obtained to generate 3D models (n = 72) of the infrazygomatic crest region. For each model, the bone depth and thickness of 27 different insertion paths were measured in the region between U6 and U7. The relationship between bone depth and thickness was statistically analyzed. The clinical risk for each insertion path was assessed according to the impacts of bone depth and thickness on insertion failure. RESULTS: Maximum bone depth (median, 7.41 mm; mean, 8.42 mm) was present at 13 mm insertion sites with a gingival tipping angle of 50° and a distal tipping angle of 30°. Maximum bone thickness (median, 3.73 mm; mean, 4.00 mm) was present at 17 mm insertion site with a gingival tipping angle of 70° and a distal tipping angle of 30°. There was a significant negative correlation between bone depth and bone thickness (rs = -0.569, P <0.001). Failure rates were significantly different among different insertion paths (P <0.001). CONCLUSIONS: Because the bone depth and thickness may affect the safe insertion of infrazygomatic crest miniscrews in the region between U6 and U7 and they are negatively related, a safe insertion protocol design for distal tooth movement should take both into consideration.

The effect of rotational degree and routine activity on the risk of collapse in transtrochanteric rotational osteotomy for osteonecrosis of the femoral head-a finite element analysis.

To explore the mechanical mechanism and provide preoperative planning basis for transtrochanteric rotational osteotomy (TRO) procedure, a joint-preserving procedure for osteonecrosis of the femoral head. Eleven TRO finite element femurs with the most common types of necrosis were analyzed under multi-loading conditions. Thereafter, we made a comprehensive evaluation by considering the anatomy characters, daily activities, and risk indicators contain necrosis expansion trend, necrotic blood supply pressure, and the risk of fracture. The risk of fracture (ROF) is the lowest when standing on feet and increases gradually during normal walking and walking upstairs and downstairs. Compared with posterior rotation, rotating forward keeps more elements at low risk. Additionally, the correlation analysis shows it has a strong negative correlation (R2 = 0.834) with the average modulus of the roof. TRO finally decreased the stress and energy effectively. However, the stress and strain energy arise when rotated posteriorly less than 120°. The comprehensive evaluation observed that rotating forward 90°could reduce the total risks to 64%. TRO is an effective technique to prevent collapse. For the anterior and superior large necrosis, we recommend to rotate forward 60° to 90° (more efficient) or backward 180°. The methodology followed in this study could provide accurate and personalize preoperative planning. Graphical Abstract A proximal femur was reconstructed and modified using Mimics from a series of computed tomography. The models were meshed after solidified and performed different osteotomy, and then assigned material based on the Hounsfield Unit from CT images. Finally, 44 different TRO finite element femurs were analyzed under multi-loading conditions and evaluated comprehensively.

The relationship between facet tropism and cervical disc herniation.

Many studies have demonstrated the association between facet tropism and disc herniation in the lumbar spine. Some of them found that lumbar disc herniation was on the side of the more sagittal facet joint interface. However, little is understood about the association of facet tropism with disc herniation in the cervical spine. As the relationship between the facet orientation and the side of cervical disc herniation (CDH) is unclear, the purpose of this study is to investigate that relationship. Ninety-six patients with single-level CDH (C4-C5, C5-C6 or C6-C7) were included in the CDH group of this study. Another 50 age-matched and gender-matched healthy participants who accepted physical examinations were enrolled as the control group. The cervical facet angles of two sides were measured using axial computed tomography (CT). The intersection angle of the midsagittal line of the vertebra to the facet line represents the facet angle. Facet tropism was defined as the angular difference of 7º between the left and the right sides. Facet tropism angle was recorded as the absolute value of the difference of facet angles between two sides. There were 20 herniations at C4-C5 level, 50 herniations at C5-C6 level and 26 herniations at C6-C7 level. The present study showed that more cases in the CDH group had facet tropism than did those in the control group at C4-C5, C5-C6 and C6-C7 level (p = .021, p = .001, p = .015, respectively). The facet tropism angles in the CDH group were significantly bigger than those in the control group at C4-C5, C5-C6 and C6-C7 level (p = .001, p = .002, p = .028, respectively). In the CDH group, the facet angles on the herniated side were found to be significantly bigger than those on the healthy side at C4-C5, C5-C6 and C6-C7 level (p = .000, p = .000, p = .037, respectively). The findings of this present study suggest that facet tropism is associated with the disc herniation in the cervical spine. We also found that cervical disc herniates towards the side of the bigger facet angle with respect to the sagittal plane. There is a need for future studies to verify the biomechanical impact of facet tropism on CDH.

Morphology and Possible Clinical Significance of the Radiating Extraforaminal Ligaments at the L1-L5 Levels.

STUDY DESIGN: A dissection-based study of 10 fresh-frozen human cadavers. OBJECTIVE: The objective of this study was to identify and describe the radiating extraforaminal ligaments in the exit regions of the L1-L5 intervertebral foramina and to research their possible clinical significance. SUMMARY OF BACKGROUND DATA: The transforaminal ligaments at the L1-L5 intervertebral foramina have been well studied. However, detailed descriptions of the radiating extraforaminal ligaments at L1-L5 are lacking. METHODS: Eighty L1-L5 intervertebral foramina from 10 fresh cadavers were studied, and the extraforaminal ligaments were identified. The quantity, morphology, origin, insertion, and spatial orientation of the extraforaminal ligaments in the L1-L5 regions were examined. The length, width, diameter, and thickness of the ligaments were measured using a vernier caliper. RESULTS: A total of 224 extraforaminal ligaments were identified in the 80 L1-L5 intervertebral foramina, and the occurrence rate of extraforaminal ligaments was 100%. One hundred and eighteen (52.68%) of the extraforaminal ligaments were radiating ligaments, and 106 (47.32%) of the extraforaminal ligaments were transforaminal ligaments. There were 97 (43.30%) ligaments at the superior aspect of the exit regions of the intervertebral foramina, 51 (22.77%) ligaments at the anterior aspect, 44 (19.64%) ligaments at the inferior aspect, and 32 (14.29%) ligaments at the posterior aspect. The morphologies of the extraforaminal ligaments were divided into two types: the strap type and the trabs type. CONCLUSION: Radiating extraforaminal ligaments exist between spinal nerves and nearby structures. Radiating extraforaminal ligaments may be of clinical importance to surgeons. Dissecting the radiating extraforaminal ligaments before percutaneous endoscopic lumbar discectomy may be an important step in reducing postoperative pain, which may result in significant benefits for patients. LEVEL OF EVIDENCE: 3.

[Effect of zishen shengxue recipe on endogenous erythropoietin in patients with renal anemia undergoing long-term hemodialysis].

OBJECTIVE: To investigate the mechanism of Zishen Shengxue Recipe (ZSR) in treating renal anemia by observing its effect on serum level of endogenous erythropoietin in patients undergoing long-term hemodialysis. METHODS: Sixty renal anemia patients undergoing long-term hemodialysis were randomly and equally assigned to two groups. The treated group was treated with subcutaneous injection of erythropoiesis stimulating factor (rHuEpo) combined with oral intake of ZSR, and the control group treated with rHuEpo alone. They were observed for eight weeks, and the blood levels of endogenous human erythropoietin (Epo), hemoglobin (Hgb), hematocrit (Hct), as well as the residual renal function (RRF) in the two groups were compared. RESULTS: Serum Epo level in the control group was unchanged after treatment (P>0.05), while that in the treated group increased significantly, and showed significant difference in comparing with that in the control group (P<0.05). Levels of Hgb and Hct increased and RRF decreased in both groups (P<0.01), but the treated group showed higher increments and lesser decrement than those in the control group (P<0.05). CONCLUSIONS: ZSR can enhance the blood levels of Hgb, Hct and Epo, postpone the descent of RRF, and correct the anemic status in patients. Its mechanism of action is possibly through alleviating the inhibition of uremic toxin on erythropoiesis, in the meanwhile of promoting the secretion of Epo.