RESUMO
In this study, the mercury-tolerant strain LTC105 was isolated from a contaminated soil sample collected from a molybdenum-lead mine in Luanchuan County, Henan Province, China. The strain was shown to be highly resistant to mercury, with a minimum inhibitory concentration (MIC) of 32 mg·L-1. After a 24-h incubation in LB medium with 10 mg·L-1 Hg2+, the removal, adsorption, and volatilization rates of Hg2+ were 97.37%, 7.3%, and 90.07%, respectively, indicating that the strain had significant influence on mercury removal. Based on the results of Fourier infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), the investigation revealed that the primary function of LTC105 was to encourage the volatilization of mercury. The LTC105 strain also showed strong tolerance to heavy metals such as Mn2+, Zn2+, and Pb2+. According to the results of the soil incubation test, the total mercury removal rate of the LTC105 inoculation increased by 16.34% when the initial mercury concentration of the soil was 100 mg·L-1 and by 62.28% when the initial mercury concentration of the soil was 50 mg·kg-1. These findings indicate that LTC105 has certain bioremediation ability for Hg-contaminated soil and is a suitable candidate strain for microbial remediation of heavy metal-contaminated soil in mining areas.
RESUMO
In brief: SORBS2, an RNA-binding protein, is identified as a regulator of aerobic glycolysis, which is essential for trophoblast migration and placental development. Reduced SORBS2 expression in preeclampsia may impair trophoblast migration by affecting mRNA stability and glycolysis, suggesting its role in the disease's pathogenesis. Abstract: Insufficient trophoblast migration and impaired uterine spiral artery remodeling are implicated in the pathogenesis of preeclampsia, contributing to inadequate placentation. However, the molecular mechanism underlying this process remains unclear. Aerobic glycolysis, which produces substantial lactate, is crucial for establishing a favorable microenvironment for early uterine preparation and supporting embryo implantation and trophoblast migration. In the present study, we have demonstrated that SORBS2, an RNA-binding protein, regulated aerobic glycolysis and significantly improved trophoblast migration in vitro. Our results showed that SORBS2 expression was significantly reduced in human PE placentas and trophoblasts during hypoxia. Overexpression of SORBS2 enhanced cell proliferation and migration, whereas knockdown of SORBS2 decreased these functions in HTR-8/SVneo cells. Mechanistic studies have demonstrated that SORBS2 directly interacts with the 3' untranslated regions (UTRs) of key glycolysis-related genes, specifically HK2. This interaction results in enhanced stability of HK2 and activation of glycolysis. Moreover, silencing HK2 abrogated the enhancement of proliferation and migration of HTR-8/SVneo cells induced by SORBS2. In conclusion, our findings suggest that the downregulation of SORBS2 may contribute to the pathogenesis of preeclampsia by regulating mRNA stability and inhibiting trophoblast migration during placentation.
Assuntos
Movimento Celular , Glicólise , Hexoquinase , Pré-Eclâmpsia , Estabilidade de RNA , RNA Mensageiro , Proteínas de Ligação a RNA , Trofoblastos , Humanos , Pré-Eclâmpsia/metabolismo , Pré-Eclâmpsia/genética , Pré-Eclâmpsia/patologia , Trofoblastos/metabolismo , Trofoblastos/patologia , Feminino , Gravidez , Proteínas de Ligação a RNA/metabolismo , Proteínas de Ligação a RNA/genética , RNA Mensageiro/metabolismo , RNA Mensageiro/genética , Hexoquinase/metabolismo , Hexoquinase/genética , Adulto , Proliferação de CélulasRESUMO
Electric Arc Furnaces (EAFs) play a pivotal part in the steel industry, offering a versatile of producing high-quality steel. This paper conducts an in-depth examination of the EAF, along with exploring mathematical modeling and optimization techniques pertinent to this furnace. Additionally, it delves into the global steel production capacity employing this technology, introduces different processes associated with EAF, scrutinizes the energy balance of EAFs, and provides an overview of numerical and simulation modeling in this context. The core focus of this extensive review is the diverse landscape of EAF simulation methods. It places particular emphasis on understanding the key components and stages of the EAF process, including charging, melting, refining, tapping, and slag removal. The review delves into the wide array of approaches and methodologies employed in EAF modeling, spanning from innovative computational fluid dynamics (CFD) and finite element analysis to the intricacies of mathematical and thermodynamic models. Furthermore, the paper underscores the importance of simulation in predicting and enhancing crucial aspects such as heat transfer, chemical reactions, and fluid dynamics within the EAF. By doing so, it contributes to the optimization of energy efficacy and the ultimate quality of steel produced in these furnaces. In conclusion, this review identifies gaps in existing knowledge and offers valuable recommendations for improving mathematical process models, underscoring the continuous efforts to enhance the efficiency, sustainability, and environmental impact of steel production processes. In conclusion, several techniques aimed at enhancing both production rates and the quality of the melting process in EAF have been put forward.
RESUMO
Recently, zinc (Zn) and its alloys have demonstrated great potential as guided bone regeneration (GBR) membranes to treat the problems of insufficient alveolar bone volume and long-term osseointegration instability during dental implantology. However, bone regeneration is a complex process consisting of osteogenesis, angiogenesis, and antibacterial function. For now, the in vivo osteogenic performance and antibacterial activity of pure Zn are inadequate, and thus fabricating a platform to endow Zn membranes with multifunctions may be essential to address these issues. In this study, various bimetallic magnesium/copper metal-organic framework (Mg/Cu-MOF) coatings were fabricated and immobilized on pure Zn. The results indicated that the degradation rate and water stability of Mg/Cu-MOF coatings could be regulated by controlling the feeding ratio of Cu2+. As the coating and Zn substrate degraded, an alkaline microenvironment enriched with Zn2+, Mg2+, and Cu2+ was generated. It significantly improved calcium phosphate deposition, differentiation of osteoblasts, and vascularization of endothelial cells in the extracts. Among them, Mg/Cu1 showed the best comprehensive performance. The superior antibacterial activity of Mg/Cu1 was demonstrated in vitro and in vivo, which indicated significantly enhanced bacteriostatic activity against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli as compared to that of the bare sample. Bimetallic Mg/Cu-MOF coating could properly coordinate the multifunction on a Zn membrane and could be a promising platform for promoting its bone regeneration, which could pave the way for Zn-based materials to be used as barrier membranes in oral clinical trials.
Assuntos
Estruturas Metalorgânicas , Osteogênese , Cobre/farmacologia , Cobre/química , Magnésio/farmacologia , Estruturas Metalorgânicas/farmacologia , Zinco/farmacologia , Zinco/química , Células Endoteliais , Angiogênese , Antibacterianos/farmacologia , Antibacterianos/químicaRESUMO
BACKGROUND: It was evidenced that cetylpyridinium-chloride (CPC) mouthwash could inhibit SARS-COV-2 activity and reduce salivary viral load, thus reducing SARS-CoV-2 transmission. However, due to insufficient residence time in the oral cavity, CPC-containing mouthwashes have no prolonged antiviral effect. The duration of action of the CPC buccal tablet is expected to be longer than that of the mouthwash. However, there are currently no reports on the salivary drug concentration of CPC buccal tablets. OBJECTIVE: The study aimed to investigate the salivary drug concentration of CPC buccal tablets and the antiviral effect of CPC on SARS-CoV-2 in vitro. TRIAL DESIGN: This is a single-dose, single-arm clinical trial, involving 10 Chinese healthy subjects who received 2-mg CPC buccal tablet to collect saliva samples and to detect saliva concentration at different timepoints within 2 h (Clinical Trial Registration Number: NCT05802628, Registration Date: April 6, 2023). MATERIALS AND METHODS: CPC concentration in saliva was detected by liquid chromatography tandem mass spectrometry (LC-MS/MS), and pharmacokinetic parameters were calculated based on the non-compartmental model. With an in vitro antiviral experiment, the activity of CPC buccal tablets against SARS-CoV-2 and its cellular toxicity was tested. RESULTS: Drug concentrations in saliva at 15 min, 30 min, 1 h, 1.5 h, and 2 h after administration were 8008.33 (1042.25, 41081.11), 2093.34 (373.15, 5759.83), 1016.58 (378.66, 3480.68), 891.77 (375.66, 6322.07), and 717.43 (197.87, 2152.71) ng/mL. PK parameters of saliva concentration: Cmax = 8008.33 (1042.25, 41081.11) ng/mL, AUC0-t = 4172.37 (904.42, 13912.61) ng/mL * h, AUC0-∞ = 6712.85 (1856.77, 19971.12) ng/mL * h, T1/2 = 1.22 (0.59, 2.83) h, Tmax = 0.25 (0.25, 0.25) h. As determined in in vitro experiment, CPC was active on SARS-CoV-2 with cytotoxic and inhibitory activity of CC50 = 35.75 µM (≈12155 ng/mL) and EC50 = 7.39 µM (≈2512.6 ng/mL). CONCLUSIONS: The comparison between the salivary CPC concentration and EC50/CC50 values from in vitro antiviral experiments suggests that CPC buccal tablets may inhibit SARS-CoV-2 activity, and the inhibition may last for approximately 30 min without cytotoxicity.
RESUMO
Guided bone regeneration (GBR) membranes are commonly used for periodontal tissue regeneration. Due to the complications of existing GBR membranes, the design of bioactive membranes is still relevant. GBR membranes with an asymmetric structure can accommodate the functional requirements of different interfacial tissues. Here, poly(lactic acid-glycolic acid) (PLGA) was selected as the matrix for preparing a bi-layered membrane with both dense and porous structure. The dense layer for blocking soft tissues was incorporated with zinc (Zn) particles, while the porous layer for promoting bone regeneration was co-incorporated with magnesium (Mg) and Zn particles. Mg/Zn-embedded PLGA membranes exhibited 166% higher mechanical strength in comparison with pure PLGA membranes and showed suitable degradation properties with a sequential ion release behavior of Mg2+ first and continuously Zn2+. More importantly, the release of Zn2+ from bi-layered PLGA endowed GBR membranes with excellent antibacterial activity (antibacterial rate > 69.3%) as well as good cytocompatibility with MC3T3-E1 (mouse calvaria pre-osteoblastic cells) and HGF-1 (human gingival fibroblast cells). Thus, the asymmetric bi-layered PLGA membranes embedded with Mg and Zn particles provide a simple and effective strategy to not only reinforce the PLGA membrane but also endow membranes with osteogenic and antibacterial activity due to the continuous ion release profile, which serves as a promising candidate for use in GBR therapy.
Assuntos
Ácido Láctico , Magnésio , Humanos , Camundongos , Animais , Copolímero de Ácido Poliláctico e Ácido Poliglicólico/farmacologia , Magnésio/farmacologia , Ácido Láctico/farmacologia , Ácido Láctico/química , Zinco/farmacologia , Membranas Artificiais , Regeneração Óssea , Antibacterianos/farmacologiaRESUMO
The effect of extracellular matrix (ECM) stiffness on embryonic trophoblast cells invasion during mammalian embryo implantation remains largely unknown. In this study, we investigated the effects of ECM stiffness on various aspects of human trophoblast cell behaviors during cell-ECM interactions. The mechanical microenvironment of the uterus was simulated by fabricating polyacrylamide (PA) hydrogels with different levels of stiffness. The human choriocarcinoma (JAR) cell lineage was used as the trophoblast model. We found that the spreading area of JAR cells, the formation of focal adhesions, and the polymerization of the F-actin cytoskeleton were all facilitated with increased ECM stiffness. Significantly, JAR cells also exhibited durotactic behavior on ECM with a gradient stiffness. Meanwhile, stiffness of the ECM affects the invasion of multicellular JAR spheroids. These results demonstrated that human trophoblast cells are mechanically sensitive, while the mechanical properties of the uterine microenvironment could play an important role in the implantation process.
RESUMO
This paper applies the situational teaching mode to obstetric clinical nursing. When explaining the nursing operation skills, according to the pre written script, design some common clinical nurse-patient conflicts and carry out situational simulation performances, so as to inspire students to think about how to effectively communicate with patients and their families and establish a harmonious nurse-patient relationship. At the same time, this paper also urges students to improve their initiative of autonomous learning and actively participate in the whole process of learning, rather than passively accept knowledge. Finally, the teaching methods of combining obstetric clinical nursing teaching with experimental teaching were compared to explore the effectiveness of situational teaching simulation teaching mode. Through the experimental comparative analysis, it can be seen that the obstetric clinical nursing teaching model based on situational teaching simulation has a certain effect and has a good guiding significance for the practical teaching of obstetric clinical nursing.
Assuntos
Treinamento por Simulação , Estudantes de Enfermagem , Humanos , AprendizagemRESUMO
BACKGROUND: Simao pine is one of the primary economic tree species for resin and timber production in southwest China. The exploitation and utilization of Simao pine are constrained by the relatively lacking of genetic information. Construction a fine genetic linkage map and detecting quantitative trait locis (QTLs) for growth-related traits is a prerequisite section of Simao Pine's molecular breeding program. RESULTS: In our study, a high-resolution Simao pine genetic map employed specific locus amplified fragment sequencing (SLAF-seq) technology and based on an F1 pseudo-testcross population has been constructed. There were 11,544 SNPs assigned to 12 linkage groups (LGs), and the total length of the map was 2,062.85 cM with a mean distance of 0.37 cM between markers. According to the phenotypic variation analysis for three consecutive years, a total of seventeen QTLs for four traits were detected. Among 17 QTLs, there were six for plant height (Dh.16.1, Dh16.2, Dh17.1, Dh18.1-3), five for basal diameter (Dbd.17.1-5), four for needle length (Dnl17.1-3, Dnl18.1) and two for needle diameter (Dnd17.1 and Dnd18.1) respectively. These QTLs individually explained phenotypic variance from 11.0-16.3%, and the logarithm of odds (LOD) value ranged from 2.52 to 3.87. CONCLUSIONS: In our study, a fine genetic map of Simao pine applied the technology of SLAF-seq has been constructed for the first time. Based on the map, a total of 17 QTLs for four growth-related traits were identified. It provides helpful information for genomic studies and marker-assisted selection (MAS) in Simao pine.
Assuntos
Pinus/crescimento & desenvolvimento , Pinus/genética , Locos de Características Quantitativas , Mapeamento Cromossômico/métodos , Fenótipo , Polimorfismo de Nucleotídeo ÚnicoRESUMO
Magnesium alloys with integration of degradability and good mechanical performance are desired for vascular stent application. Drug-eluting coatings may optimize the corrosion profiles of magnesium substrate and reduce the incidence of restenosis simultaneously. In this paper, poly (trimethylene carbonate) (PTMC) with different molecular weight (50,000 g/mol named as PTMC5 and 350,000 g/mol named as PTMC35) was applied as drug-eluting coatings on magnesium alloys. A conventional antiproliferative drug, paclitaxel (PTX), was incorporated in the PTMC coating. The adhesive strength, corrosion behavior, drug release and biocompatibility were investigated. Compared with the PLGA control group, PTMC coating was uniform and gradually degraded from surface to inside, which could provide long-term protection for the magnesium substrate. PTMC35 coated samples exhibited much slower corrosion rate 0.05 µA/cm2 in comparison with 0.11 µA/cm2 and 0.13 µA/cm2 for PLGA and PTMC5 coated counterparts. In addition, PTMC35 coating showed more stable and sustained drug release ability and effectively inhibited the proliferation of human umbilical vein vascular smooth muscle cells. Hemocompatibility test indicated that few platelets were adhered on PTMC5 and PTMC35 coatings. PTMC35 coating, exhibiting surface erosion behavior, stable drug release and good biocompatibility, could be a good candidate as a drug-eluting coating for magnesium-based stent.
RESUMO
OBJECTIVES: Construct and validate a nomogram model integrating the radiomics features and the clinical risk factors to differentiating axial spondyloarthritis (axSpA) in low back pain patients undergone sacroiliac joint (SIJ)-MRI. METHODS: A total of 638 patients confirmed as axSpA (n = 424) or non-axSpA (n = 214) who were randomly divided into training (n = 447) and validation cohorts (n = 191). Optimal radiomics signatures were constructed from the 3.0 T SIJ-MRI using maximum relevance-minimum redundancy (mRMR) and the least absolute shrinkage and selection operator (LASSO) algorithm in the training cohort. We also included six clinical risk predictors to build the clinical model. Incorporating the independent clinical factors and Rad-score, a nomogram model was constructed by multivariable logistic regression analysis. The performance of the clinical, Rad-score, and nomogram models were evaluated by ROC analysis, calibration curve and decision curve analysis (DCA). RESULTS: A total of 1316 features were extracted and reduced to 15 features to build the Rad-score. The Rad-score allowed a good discrimination in the training (AUC, 0.82; 95% CI: 0.77, 0.86) and the validation cohort (AUC, 0.82; 95% CI: 0.76, 0.88). The clinical-radiomics nomogram model also showed favourable discrimination in the training (AUC, 0.90; 95% CI: 0.86, 0.93) and the validation cohort (AUC, 0.90; 95% CI: 0.85, 0.94). Calibration curves (P >0.05) and DCA demonstrated the nomogram was useful for axSpA diagnosis in the clinical environment. CONCLUSION: The study proposed a radiomics model was able to separate axSpA and non-axSpA. The clinical-radiomics nomogram can increase the efficacy for differentiating axSpA, which might facilitate clinical decision-making process.
Assuntos
Espondiloartrite Axial , Nomogramas , Estudos de Coortes , Humanos , Imageamento por Ressonância Magnética , Fatores de RiscoRESUMO
RATIONALE: Henoch-Schoenlein purpura (HSP) is a systemic small-vessel vasculitis that commonly occurs in children. Gastrointestinal HSP can rarely progress to gastrointestinal perforation, followed by massive gastrointestinal bleeding. PATIENT CONCERNS: An 8-year-old Chinese boy was transferred to the pediatric intensive care unit of our hospital with an emergency occurrence of purpura, severe hematemesis, large bloody stools, and sharp abdominal pain, and complained of abdominal pain and rash 2 weeks prior. DIAGNOSIS: The patient had purpura with lower limb predominance, abdominal pain, and gastrointestinal bleeding. Immunofluorescence microscopy of histological sections showed granular and lumpy IgA focal deposition in the blood vessel walls. He was diagnosed with HSP. INTERVENTIONS: Initially, he was treated with methylprednisolone, posterior pituitary injection, somatostatin, and hemocoagulase, together with the infusion of large blood products. Postoperatively, he was administered nasal continuous positive airway pressure -assisted ventilation, anti-infection treatment, albumin transfusion, platelet transfusion, abdominal drainage, methylprednisolone, fluconazole anti-fungal treatment, and wound dressing. OUTCOMES: There was no evidence of rebleeding, abdominal pain, or purpura at the 2-month follow-up assessment. LESSONS: Abdominal HSP should be alert to gastrointestinal perforation when using hormone therapy.
Assuntos
Hemorragia Gastrointestinal/etiologia , Vasculite por IgA/complicações , Dor Abdominal/etiologia , Criança , Hematemese/etiologia , Humanos , Vasculite por IgA/tratamento farmacológico , Masculino , Metilprednisolona/efeitos adversos , Metilprednisolona/uso terapêuticoRESUMO
OBJECTIVE: To investigate the effect of risk management combined with intraoperative precision care on the efficacy and safety of interventional embolization therapy for elderly patients with cerebral aneurysms. METHODS: In this prospective randomized controlled study, we included 60 elderly patients with cerebral aneurysm treated with interventional embolization. The patients were randomly divided into an experiment group (n=30) and a control group (n=30). The control group received conventional care during the interventional procedure, while the experiment group received risk management combined with precision care. The outcome of the procedure, time to disappearance of clinical symptoms, length of hospitalization, incidence of complications, neurological function and quality of life before and 3 months after the procedure in both groups were assessed and compared. RESULTS: Compared with the control group, the experiment group had significantly less intraoperative bleeding, shorter operative time (all P<0.001), shorter time to disappearance of clinical symptoms and shorter hospitalization (all P<0.001), and a lower rate of surgical complications (P<0.05). Three months after the operation, the experiment group had better neurological function and quality of life, with significantly lower mRs scores (modified Rankin scale), NIHSS (National Institute of Health Stroke Scale) and higher SF-36 scores (MOS item short from health survey) than those of the control group (both P<0.001). CONCLUSION: Risk management combined with precision care can effectively improve the surgical safety of interventional embolization in elderly patients with cerebral aneurysm, reduce the incidence of surgical complications, and thus improve the prognosis.
RESUMO
Membrane exposure is a common complication after the guided bone regeneration (GBR) procedure and has a detrimental influence on the bone regeneration outcomes, while the commercially available GBR membranes show limited exposure tolerance. Recently, zinc (Zn) has been suggested as a promising material to be used as a barrier membrane in GBR therapy for bone augmentation. In this study, the degradation behavior in artificial saliva solution, cytotoxicity and antibacterial activity of pure Zn were investigated to explore its degradation and associated biocompatibility in the case of premature membrane exposure. The results indicated that the degradation rate of Zn in artificial saliva solution was about 31.42 µm year-1 after 28 days of immersion. The corrosion products on the Zn surface were mainly composed of Zn3(PO4)2, Ca3(PO4)2, CaHPO4, Zn5(CO3)2(OH)6 and ZnO. Besides, Zn presented an acceptable in vitro HGF cytocompatibility and a high antibacterial activity against Porphyromonas gingivalis. The preliminary results demonstrate that pure Zn exhibits appropriate degradation behavior, adequate cell compatibility and favorable antibacterial properties in the oral environment and is thus believed to sustain profitable function when membrane exposure occurs. The results provided new insights for understanding the exposure tolerance of Zn based membranes and are beneficial to their clinical applications.
Assuntos
Antibacterianos/farmacologia , Materiais Biocompatíveis/farmacologia , Porphyromonas gingivalis/efeitos dos fármacos , Zinco/farmacologia , Antibacterianos/química , Materiais Biocompatíveis/química , Regeneração Óssea/efeitos dos fármacos , Linhagem Celular , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Técnicas Eletroquímicas , Humanos , Testes de Sensibilidade Microbiana , Zinco/químicaRESUMO
Acne vulgaris is an inflammatory disease of hair follicle sebaceous gland units,with an incidence of up to 85% in adolescents.The pathogenesis is closely related to androgen,sebum secretion,lipophilic microbial infection,and immune-inflammatory reaction.This article reviews the signaling pathways related to acne from the aspects of inflammatory signaling pathways and sebum secretion pathways.
Assuntos
Acne Vulgar , Adolescente , Humanos , Glândulas Sebáceas , Sebo , Transdução de SinaisRESUMO
Vertical take-off and landing unmanned aerial vehicles (VTOL UAV) are widely used in various fields because of their stable flight, easy operation, and low requirements for take-off and landing environments. To further expand the UAV's take-off and landing environment to include a non-structural complex environment, this study developed a landing gear robot for VTOL vehicles. This article mainly introduces the adaptive landing control of the landing gear robot in an unstructured environment. Based on the depth camera (TOF camera), IMU, and optical flow sensor, the control system achieves multi-sensor data fusion and uses a robotic kinematical model to achieve adaptive landing. Finally, this study verifies the feasibility and effectiveness of adaptive landing through experiments.
RESUMO
The biodegradable metallic devices undergo stress/strain-induced corrosion when they are used for load-bearing applications. The stress/strain induced-corrosion behavior causes differences in corrosion rate, corrosion morphology, strain distribution and mechanical performance of the devices. One representative example is the biodegradable stent. Biodegradable stents undergo complex inhomogeneous deformation that can cause dramatic non-uniform stent degradation, resulting in stress concentration and stents failure. The degradation of biodegradable devices requires special attention to the mutual effect between the applied strain and degradation. The quantitative relationship between strain and corrosion of the sample alloys (WE43, Fe and Zn), selected from three typical biodegradable metals, is firstly investigated and compared in this study. The in vitro degradation and the strength retention of WE43, Fe and Zn wires were investigated under different elastic and plastic strain levels ranging from 0.1% to 30%. The results indicated that the applied strain could bring down the corrosion potential, increase corrosion current and accelerate the degradation of three biodegradable metals. Specifically, remarkable enhanced localized corrosion was observed for plastic strained WE43 compared with those with elastic strains. This localized corrosion morphology significantly accelerated the strength decline at first, while the differences diminished with longer immersion period. Fe and Zn exhibited increased degradation with plastic strain applications than those under elastic strains. However, the degradation was not further increased with the increasing magnitude of plastic strains. Moreover, the bended wires were subcutaneously implanted in the dorsal aspect of the rats and the effect of bending deformation on in vitro and in vivo degradation of three metallic wires were also compared. The U-bended WE43 wires suffered more severe in vitro degradation at the stress concentrated region. Surprisingly, the early fracture of the undeformed regions was observed in the in vivo test. In conclusion, the corrosion rate, corrosion morphology and mechanical properties of WE43, Fe and Zn was sensitive to magnitude of the applied strains. The quantification results provided new insights into understanding the strain-dependent corrosion of three biodegradable metals both in vitro and in vivo. STATEMENT OF SIGNIFICANCE: Biodegradable implants are subjected to various mechanical environment during the deployment and subsequent physiological activity. It is necessary to have a clear understanding of the effects of the applied stress on degradation. This study addresses the quantitative effects of applied strain/stress on the in vitro and in vivo degradation of three typical biodegradable metals (Mg, Fe and Zn). These quantification results provide new insights into understanding the strain-induced corrosion of three metals.
Assuntos
Implantes Absorvíveis , Ligas , Animais , Materiais Biocompatíveis , Corrosão , Teste de Materiais , Ratos , Stents , ZincoRESUMO
Insulin resistance refers to a pathological condition in which cells fail to respond sufficiently to insulin,leading to impaired glucose uptake and utilization. In recent years,some skin diseases have been found to be associated with metabolic syndrome,and insulin resistance is considered to be the most important pathophysiological feature of the metabolic syndrome. Recent literatures have described the role of insulin resistance in the pathogenesis of these skin diseases. This article elucidates the mechanisms of insulin resistance involved in skin diseases.
Assuntos
Resistência à Insulina , Dermatopatias/complicações , Humanos , Insulina , Síndrome MetabólicaRESUMO
INTRODUCTION: Endoplasmic reticulum stress (ERS) has been implicated in the pathogenesis of various inflammatory diseases. However, the role of ERS in psoriasis is still unclear. AIM: To examine ERS in psoriasis keratinocytes and to assess the association of ERS with skin inflammation response. MATERIAL AND METHODS: We investigated ERS in keratinocytes of normal skin, lesional and perilesional psoriasis vulgaris (PV) skin tissues using transmission electron microscope (TEM) examination, Western blot and immunostaining analysis. RESULTS: By TEM examination, we found that endoplasmic reticulum (ER) in psoriatic keratinocytes was ultrastructurally abnormal, with changes in ER morphology and the ER expansion. Using Western blot and immunostaining analysis, we showed that the expression of ERS-associated proteins, such as BiP, CHOP and XBP1, was enhanced in PV epidermis compared to the healthy skin. Moreover, abundant TNF-α protein was correlated to the increased BiP, CHOP and XBP1 expression in PV epidermis. CONCLUSIONS: Our findings demonstrate that PV keratinocytes have an increased ERS, which may contribute to the pathogenesis of PV.
RESUMO
Magnesium alloys with integration of degradability and good mechanical performance are desired for orthopedic implants. In this paper, Mg-2Sr-Ca and Mg-2Sr-Zn alloys were prepared and the degradation as well as the bone response were investigated. Compared with the binary Mg-2Sr alloys, the addition of Ca and Zn improved the in vitro and in vivo corrosion resistance. Mg-2Sr-Ca and Mg-2Sr-Zn alloys exhibited more uniform corrosion and maintained the configuration of the implants 4 weeks post-implantation. The in vivo corrosion rates were 0.85 mm/yr for Mg-2Sr-Zn and 1.10 mm/yr for Mg-2Sr-Ca in comparison with 1.37 mm/yr for Mg-2Sr. The in vitro cell tests indicated that Mg-2Sr-Ca and Mg-2Sr-Zn alloys exhibited higher MG63 cell viability than Mg-2Sr alloy. Furthermore, these two alloys can promote the mineralization and new bone formation without inducing any significant adverse effects and this sound osteogenic properties suggest its attractive clinical potential.