RESUMO
Suppression of threading dislocations (TDs) in thin germanium (Ge) layers grown on silicon (Si) substrates has been critical for realizing high-performance Si-based optoelectronic and electronic devices. An advanced growth strategy is desired to minimize the TD density within a thin Ge buffer layer in Ge-on-Si systems. In this work, we investigate the impact of P dopants in 500-nm thin Ge layers, with doping concentrations from 1 to 50 × 1018 cm-3. The introduction of P dopants has efficiently promoted TD reduction, whose potential mechanism has been explored by comparing it to the well-established Sb-doped Ge-on-Si system. P and Sb dopants reveal different defect-suppression mechanisms in Ge-on-Si samples, inspiring a novel co-doping technique by exploiting the advantages of both dopants. The surface TDD of the Ge buffer has been further reduced by the co-doping technique to the order of 107 cm-2 with a thin Ge layer (of only 500 nm), which could provide a high-quality platform for high-performance Si-based semiconductor devices.
RESUMO
Robust laser sources are a fundamental building block for contemporary information technologies. Originating from condensed-matter physics, the concept of topology has recently entered the realm of optics, offering fundamentally new design principles for lasers with enhanced robustness. In analogy to the well-known Majorana fermions in topological superconductors, Dirac-vortex states have recently been investigated in passive photonic systems and are now considered as a promising candidate for robust lasers. Here, we experimentally realize the topological Dirac-vortex microcavity lasers in InAs/InGaAs quantum-dot materials monolithically grown on a silicon substrate. We observe room-temperature continuous-wave linearly polarized vertical laser emission at a telecom wavelength. We confirm that the wavelength of the Dirac-vortex laser is topologically robust against variations in the cavity size, and its free spectral range defies the universal inverse scaling law with the cavity size. These lasers will play an important role in CMOS-compatible photonic and optoelectronic systems on a chip.
RESUMO
Semiconductor mode-locked optical frequency comb (ML-OFC) sources with extremely high repetition rates are central to many high-frequency applications, such as dense wavelength-division multiplexing. Dealing with distortion-free amplification of ultra-fast pulse trains from such ML-OFC sources in high-speed data transmission networks requires the deployment of semiconductor optical amplifiers (SOAs) with ultrafast gain recovery dynamics. Quantum dot (QD) technology now lies at the heart of many photonic devices/systems owing to their unique properties at the O-band, including low alpha factor, broad gain spectrum, ultrafast gain dynamics, and pattern-effect free amplification. In this swork, we report on ultrafast and pattern-free amplification of â¼100â GHz pulsed trains from a passively ML-OFC and up to 80 Gbaud/s non-return-to-zero (NRZ) data transmission using an SOA. Most significantly, both key photonic devices presented in this work are fabricated from identical InAs/GaAs QD materials operating at O-band, which paves the way for future advanced photonic chips, where ML-OFCs could be monolithically integrated with SOAs and other photonic components, all originated from the same QD-based epi-wafer.
RESUMO
Optical resonant cavities with high quality factor (Q-factor) are widely used in science and technology for their capabilities of strong confinement of light and enhanced light-matter interaction. The 2D photonic crystal structure with bound states in the continuum (BICs) is a novel concept for resonators with ultra-compact device size, which can be used to generate surface emitting vortex beams based on symmetry-protected BICs at the Γ point. Here, to the best of our knowledge, we demonstrate the first photonic crystal surface emitter with a vortex beam by using BICs monolithically grown on CMOS-compatible silicon substrate. The fabricated quantum-dot BICs-based surface emitter operates at 1.3 µm under room temperature (RT) with a low continuous wave (CW) optically pumped condition. We also reveal the BIC's amplified spontaneous emission with the property of a polarization vortex beam, which is promising to provide a novel degree of freedom in classical and quantum realms.
RESUMO
The realisation of on-chip light sources paves the way towards the full integration of Si-based photonic integrated circuits (PICs).
RESUMO
Epitaxial growth of III-V materials on a CMOS-compatible Si (001) substrate enables the feasibility of mass production of low-cost and high-yield Si-based III-V optoelectronic devices. However, the material dissimilarities between III-V and group-IV materials induce several types of defects, especially threading dislocations (TDs) and antiphase boundaries (APBs). The presence of these defects is detrimental to the optoelectronic device performance and thus needs to be eliminated. In this paper, the mechanism of APB annihilation during the growth of GaAs on on-axis Si (001) is clarified, along with a detailed investigation of the interaction between TDs and the periodic {110} APBs. A significant reduction in the TD density ascribed to the presence of periodic APBs is discussed. This new observation opens the possibility of reducing both APBs and TDs simultaneously by utilising optimised GaAs growth methods in the future. Hence, a thin APB-free GaAs/Si (001) platform with a low TD density (TDD) was obtained. Based on this platform, a high-performance high-yield III-V optoelectronic device grown on CMOS-compatible Si (001) substrates with an overall thickness below the cracking threshold is feasible, enabling the mass production of Si-based photonic integrated circuits (PICs).
RESUMO
The quantum-confined Stark effect in InAs/In(Ga)As quantum dots (QDs) using non-intentionally doped and p-doped QD barriers was investigated to compare their performance for use in optical modulators. The measurements indicate that the doped QD barriers lead to a better figure of merit (FoM), defined as the ratio of the change in absorption Δα for a reverse bias voltage swing to the loss at 1 V α(1 V), FoM=Δα/α (1 V). The improved performance is due to the absence of the ground-state absorption peak and an additional component to the Stark shift. Measurements indicate that p-doping the QD barriers can lead to more than a 3x increase in FoM modulator performance between temperatures of -73 °C to 100 °C when compared with the stack with NIDQD barriers.
RESUMO
High-power, broadband quantum-dot (QD) superluminescent diodes (SLDs) are ideal light sources for optical coherence tomography (OCT) imaging systems but have previously mainly been fabricated on native GaAs- or InP-based substrates. Recently, significant progress has been made to emigrate QD SLDs from native substrates to silicon substrates. Here, we demonstrate electrically pumped continuous-wave InAs QD SLDs monolithically grown on silicon substrates with significantly improved performance thanks to the achievement of a low density of defects in the III-V epilayers. The fabricated narrow-ridge-waveguide device exhibits a maximum 3 dB bandwidth of 103 nm emission spectrum centered at the O-band together with a maximum single facet output power of 3.8 mW at room temperature. The silicon-based SLD has been assessed for application in an OCT system. Under optimized conditions, a predicted axial resolution of â¼5.3µm is achieved with a corresponding output power of 0.66 mW/facet.
RESUMO
An InAs/InGaAs quantum dot laser with a heterostructure epitaxially grown on a silicon substrate was used to fabricate injection microdisk lasers of different diameters (15-31 µm). A post-growth process includes photolithography and deep dry etching. No surface protection/passivation is applied. The microlasers are capable of operating heatsink-free in a continuous-wave regime at room and elevated temperatures. A record-low threshold current density of 0.36 kA/cm2 was achieved in 31 µm diameter microdisks operating uncooled. In microlasers with a diameter of 15 µm, the minimum threshold current density was found to be 0.68 kA/cm2. Thermal resistance of microdisk lasers monolithically grown on silicon agrees well with that of microdisks on GaAs substrates. The ageing test performed for microdisk lasers on silicon during 1000 h at a constant current revealed that the output power dropped by only ~9%. A preliminary estimate of the lifetime for quantum-dot (QD) microlasers on silicon (defined by a double drop of the power) is 83,000 h. Quantum dot microdisk lasers made of a heterostructure grown on GaAs were transferred onto a silicon wafer using indium bonding. Microlasers have a joint electrical contact over a residual n+ GaAs substrate, whereas their individual addressing is achieved by placing them down on a p-contact to separate contact pads. These microdisks hybridly integrated to silicon laser at room temperature in a continuous-wave mode. No effect of non-native substrate on device characteristics was found.
RESUMO
Semiconductor III-V photonic crystal (PC) laser is regarded as a promising ultra-compact light source with unique advantages of ultralow energy consumption and small footprint for the next generation of Si-based on-chip optical interconnects. However, the significant material dissimilarities between III-V materials and Si are the fundamental roadblock for conventional monolithic III-V-on-silicon integration technology. Here, we demonstrate ultrasmall III-V PC membrane lasers monolithically grown on CMOS-compatible on-axis Si (001) substrates by using III-V quantum dots. The optically pumped InAs/GaAs quantum-dot PC lasers exhibit single-mode operation with an ultra-low threshold of ~0.6 µW and a large spontaneous emission coupling efficiency up to 18% under continuous-wave condition at room temperature. This work establishes a new route to form the basis of future monolithic light sources for high-density optical interconnects in future large-scale silicon electronic and photonic integrated circuits.
RESUMO
The first waveguide coupled phosphide-based UTC photodiodes grown by Solid Source Molecular Beam Epitaxy (SSMBE) are reported in this paper. Metal Organic Vapour Phase Epitaxy (MOVPE) and Gas Source MBE (GSMBE) have long been the predominant growth techniques for the production of high quality InGaAsP materials. The use of SSMBE overcomes the major issue associated with the unintentional diffusion of zinc in MOVPE and gives the benefit of the superior control provided by MBE growth techniques without the costs and the risks of handling toxic gases of GSMBE. The UTC epitaxial structure contains a 300 nm n-InP collection layer and a 300 nm n++-InGaAsP waveguide layer. UTC-PDs integrated with Coplanar Waveguides (CPW) exhibit 3 dB bandwidth greater than 65 GHz and output RF power of 1.1 dBm at 100 GHz. We also demonstrate accurate prediction of the absolute level of power radiated by our antenna integrated UTCs, between 200 GHz and 260 GHz, using 3d full-wave modelling and taking the UTC-to-antenna impedance match into account. Further, we present the first optical 3d full-wave modelling of waveguide UTCs, which provides a detailed insight into the coupling between a lensed optical fibre and the UTC chip.
RESUMO
The integration of optically active III-V and electronic-suitable IV materials on the same nanowire could provide a great potential for the combination of photonics and electronics in the nanoscale. In this Letter, we demonstrate the growth of GaAs/Ge core-shell nanowires on Si substrates by molecular beam epitaxy and investigate the radial and axial Ge epitaxy on GaAs nanowires in detail. High-quality core-shell nanowires with smooth side facets and dislocation-free, sharp interfaces are achieved. It is found that the low shell growth temperature leads to smoother side facets, while higher shell growth temperatures lead to more relaxed structures with significantly faceted sidewalls. The possibility of forming a III-V/IV heterostructure nanowire with a Ge section development in the axial direction of a GaAs nanowire using a Ga droplet is also revealed. These nanowires provide an ideal platform for nanoscale III-V/IV combination, which is promising for highly integrated photonic and electronic hybrid devices on a single chip.
RESUMO
High-performance injection microdisk (MD) lasers grown on Si substrate are demonstrated for the first time, to the best of our knowledge. Continuous-wave (CW) lasing in microlasers with diameters from 14 to 30 µm is achieved at room temperature. The minimal threshold current density of 600 A/cm2 (room temperature, CW regime, heatsink-free uncooled operation) is comparable to that of high-quality MD lasers on GaAs substrates. Microlasers on silicon emit in the wavelength range of 1320-1350 nm via the ground state transition of InAs/InGaAs/GaAs quantum dots. The high stability of the lasing wavelength (dλ/dI=0.1 nm/mA) and the low specific thermal resistance of 4×10-3°C×cm2/W are demonstrated.
RESUMO
We report on the first electrically pumped continuous-wave (cw) InAs/GaAs quantum dot (QD) lasers monolithically grown on on-axis Si (001) substrates without any intermediate buffer layers. A 400 nm antiphase boundary (APB) free epitaxial GaAs film with a small root-mean-square (RMS) surface roughness of 0.86 nm was first deposited on a 300 mm standard industry-compatible on-axis Si (001) substrate by metal-organic chemical vapor deposition (MOCVD). The QD laser structure was then grown on this APB-free GaAs/Si (001) virtual substrate by molecular beam epitaxy (MBE). Room-temperature cw lasing at ~1.3 µm has been achieved with a threshold current density of 425 A/cm2 and single facet output power of 43 mW. Under pulsed operation, lasing operation up to 102 °C has been realized, with a threshold current density of 250 A/cm2 and single facet output power exceeding 130 mW at room temperature.
RESUMO
Bobby sox homolog (Bbx) is an evolutionally conserved gene, but its biological function remains elusive. Here, we characterized defects of Bbx mutant rats that were created by PiggyBac-mediated insertional mutagenesis. Smaller body size and male infertility were the two major phenotypes of homozygous Bbx mutants. Bbx expression profile analysis showed that Bbx was more highly expressed in the testis and pituitary gland than in other organs. Histology and hormonal gene expression analysis of control and Bbx-null pituitary glands showed that loss of Bbx appeared to be dispensable for pituitary histogenesis and the expression of major hormones. BBX was localized in the nuclei of postmeiotic spermatids and Sertoli cells in wild-type testes, but absent in mutant testes. An increased presence of aberrant multinuclear giant cells and apoptotic cells was observed in mutant seminiferous tubules. TUNEL-positive cells costained with CREM (round spermatid marker), but not PLZF (spermatogonia marker), gammaH2Ax (meiotic spermatocyte marker), or GATA4 (Sertoli cell marker). Finally, there were drastically reduced numbers and motility of epididymal sperm from Bbx-null rats. These results suggest that loss of BBX induces apoptosis of postmeiotic spermatids and results in spermiogenesis defects and infertility.
Assuntos
Fertilidade/genética , Hipófise/metabolismo , Espermatogênese/genética , Testículo/metabolismo , Fatores de Transcrição/genética , Animais , Apoptose/genética , Elementos de DNA Transponíveis , Expressão Gênica , Perfilação da Expressão Gênica , Masculino , Mutagênese , Hipófise/crescimento & desenvolvimento , Ratos , Células de Sertoli/metabolismo , Motilidade dos Espermatozoides/genética , Espermátides/metabolismo , Testículo/crescimento & desenvolvimento , Fatores de Transcrição/metabolismoRESUMO
The addition of elevated temperature steps (annealing) during the growth of InAs/GaAs quantum dot (QD) structures on Si substrates results in significant improvements in their structural and optical properties and laser device performance. This is shown to result from an increased efficacy of the dislocation filter layers (DFLs); reducing the density of dislocations that arise at the Si/III-V interface which reach the active region. The addition of two annealing steps gives a greater than three reduction in the room temperature threshold current of a 1.3 µm emitting QD laser on Si. The active region of structures grown on Si have a room temperature residual tensile strain of 0.17%, consistent with cool down from the growth temperature and the different Si and GaAs thermal expansion coefficients. This strain limits the amount of III-V material that can be grown before relaxation occurs.
RESUMO
We report the first InAs/GaAs quantum-dot (QD) superluminescent diode (SLD) monolithically grown on a Ge substrate by molecular beam epitaxy. The QD SLD exhibits a 3 dB emission bandwidth of ~60 nm centered at 1252 nm with output power of 27 mW at room temperature. The 3 dB bandwidth is very stable over the temperature range from 20 °C to 100 °C, which highlights the potential for integration with high performance ICs.
Assuntos
Arsenicais , Gálio , Índio , Luz , Nanotecnologia/instrumentação , Pontos Quânticos , Desenho de EquipamentoRESUMO
We compare InAlAs/GaAs and InGaAs/GaAs strained-layer superlattices (SLSs) as dislocation filter layers for 1.3-µm InAs/GaAs quantum-dot laser structures directly grown on Si substrates. InAlAs/GaAs SLSs are found to be more effective than InGaAs/GaAs SLSs in blocking the propagation of threading dislocations generated at the interface between the GaAs buffer layer and the Si substrate. Room-temperature lasing at ~1.27 µm with a threshold current density of 194 A/cm(2) and output power of ~77 mW has been demonstrated for broad-area lasers grown on Si substrates using InAlAs/GaAs dislocation filter layers.
RESUMO
The growth of self-catalyzed ternary core-shell GaAsP nanowire (NW) arrays on SiO2 patterned Si(111) substrates has been demonstrated by using solid-source molecular beam epitaxy. A high-temperature deoxidization step up to â¼ 900 °C prior to NW growth was used to remove the native oxide and/or SiO2 residue from the patterned holes. To initiate the growth of GaAsP NW arrays, the Ga predeposition used for assisting the formation of Ga droplets in the patterned holes, was shown to be another essential step. The effects of the patterned-hole size on the NW morphology were also studied and explained using a simple growth model. A lattice-matched radial GaAsP core-shell NW structure has subsequently been developed with room-temperature photoluminescence emission around 740 nm. These results open up new perspectives for integrating position-controlled III-V NW photonic and electronic structures on a Si platform.
RESUMO
The hybrid structure of GaAs/GaAsSb quantum well (QW)/InAs quantum dots solar cells (QDSCs) is analyzed using power-dependent and temperature-dependent photoluminescence. We demonstrate that placing the GaAsSb QW beneath the QDs forms type-II characteristics that initiate at 12% Sb composition. Current density-voltage measurements demonstrate a decrease in power efficiency with increasing Sb composition. This could be attributed to increased valence band potential in the GaAsSb QW that subsequently limits hole transportation in the QD region. To reduce the confinement energy barrier, a 2 nm GaAs wall is inserted between GaAsSb QW and InAs QDs, leading to a 23% improvement in power efficiency for QDSCs.