Insights into the LiMn2O4 Cathode Stability in Aqueous Electrolytes.

LiMn2O4 (LMO) cathodes present large stability when cycled in aqueous electrolytes, contrasting with their behavior in conventional organic electrolytes in lithium-ion batteries (LIBs). To elucidate the mechanisms underlying this distinctive behavior, we employ unconventional characterization techniques, including variable energy positron annihilation lifetime spectroscopy (VEPALS), tip-enhanced Raman spectroscopy (TERS), and macro-Raman spectroscopy (with tens of µm-size laser spot). These still rather unexplored techniques in the battery field provide complementary information across different length scales, revealing previously hidden features. VEPALS offers atomic-scale insights, uncovering cationic defects and subnanometer pores that tend to collapse with cycling. TERS, operating in the nanometric range at the surface, captured the presence of Mn3O4 and its dissolution with cycling, elucidating dynamic changes during operation. Additionally, TERS highlights the accumulation of SO4 2- at grain boundaries. Macro-Raman spectroscopy focuses on the micrometer scale, depicting small changes in the cathode's long-range order, suggesting a slow but progressive loss of crystalline quality under operation. Integrating these techniques provides a comprehensive assessment of LMO cathode stability in aqueous electrolytes, offering multifaceted insights into phase and defect evolution that can help to rationalize the origin of such stability when compared with conventional organic electrolytes. Our findings advance the understanding of LMO behavior in aqueous environments and provide guidelines for its development for next-generation LIBs.

TEM-compatible microdevice for the complete thermoelectric characterization of epitaxially integrated Si-based nanowires.

Nanostructured materials present improved thermoelectric properties due to non-trivial effects at the nanoscale. However, the characterization of individual nanostructures, especially from the thermal point of view, is still an unsolved topic. This work presents the complete structural, morphological, and thermoelectrical evaluation of the selfsame individual bottom-up integrated nanowire employing an innovative micro-machined device compatible with transmission electron microscopy whose fabrication is also discussed. Thanks to a design that arranges the nanostructured samples completely suspended, detailed structural analysis using transmission electron microscopy is enabled. In the same device architecture, electrical collectors and isolated heaters are available at both ends of the trenches for thermoelectrical measurements of the nanowire i.e. thermal and electrical properties simultaneously. This allows the direct measurement of the nanowire power factor. Furthermore, micro-Raman thermometry measurements were performed to evaluate the thermal conductivity of the same suspended silicon nanowire. A thermal profile of the self-heating nanowire could be spatially resolved and used to compute the thermal conductivity. In this work, heavily-doped silicon nanowires were grown on this microdevices yielding a thermal conductivity of 30.8 ± 1.7 W Km-1 and a power factor of 2.8 mW mK-2 at an average nanowire temperature of 400 K. Notably, no thermal contact resistance was observed between the nanowire and the bulk, confirming the epitaxial attachment. The device presented here shows remarkable utility in the challenging thermoelectrical characterization of integrated nanostructures and in the development of multiple devices such as thermoelectric generators.

A High Temperature Harvestorer Based on a Photovoltaic Cell and an Oxygen Ion Battery.

Hybrid devices for combined energy harvesting and storage, i.e., harvestorers, are attractive solutions for powering small autonomous devices (e.g., "smart appliances", Internet of things nodes), which are ever more prominent as the digitalization and technologization of our society progresses. A concept for a high temperature (HT) harvestorer is presented, and the operational characteristics of a prototype device are discussed. It is based on photovoltaic (PV) energy harvesting and HT electrochemical energy storage. The HT-PV cells employ SrTiO3/La0.9Sr0.1CrO3-δ heterojunctions for energy harvesting and produce photovoltages up to 1 V and photocurrents of several mA cm-2 upon UV illumination at 350 °C. Electrochemical energy storage is realized by oxygen ion battery (OIB), a device based on mixed ionic and electronic conducting oxide thin film electrodes and an yttria stabilized zirconia electrolyte. The OIB exhibits capacities of up to 11 mC cm-2 (3 µA h cm-2) at 0.6 V (350 °C). A prototype harvestorer device was fabricated by integrating an HT-PV and an OIB cell into one device. This harvestorer was operated over several cycles consisting of harvesting and storing energy under illumination, followed by retrieval of the stored energy without illumination. Up to 3.5 mJ cm-2 (1 µW h cm-2) was stored with energy efficiencies up to 67%. Approaches for further optimization are discussed.

Local Heat Dissipation and Elasticity of Suspended Silicon Nanowires Revealed by Dual Scanning Electron and Thermal Microscopies.

A novel combined setup, with a scanning thermal microscope (SThM) embedded in a scanning electron microscope (SEM), is used to characterize a suspended silicon rough nanowire (NW), which is epitaxially clamped at both sides and therefore monolithically integrated in a microfabricated device. The rough nature of the NW surface, which prohibits vacuum-SThM due to loose contact for heat dissipation, is circumvented by decorating the NW with periodic platinum dots. Reproducible approaches over these dots, enabled by the live feedback image provided by the SEM, yield a strong improvement in thermal contact resistance and a higher accuracy in its estimation. The results-thermal resistance at the tip-sample contact of 188±3.7K µW-1 and thermal conductivity of the NW of 13.7±1.6W m-1 K-1-are obtained by performing a series of approach curves on the dots. Noteworthy, the technique allows measuring elastic properties at the same time-the moment of inertia of the NW is found to be (6.1±1.0) × 10-30m4-which permits to correlate the respective effects of the rough shell on heat dissipation and on the NW stiffness. The work highlights the capabilities of the dual SThM/SEM instrument, in particular the interest of systematic approach curves with well-positioned and monitored tip motion.

Isotope Exchange Raman Spectroscopy (IERS): A Novel Technique to Probe Physicochemical Processes In Situ.

A novel in situ methodology for the direct study of mass-transport properties in oxides with spatial and unprecedented time resolution, based on Raman spectroscopy coupled to isothermal isotope exchanges, is developed. Changes in the isotope concentration, resulting in a Raman frequency shift, can be followed in real time, which is not accessible by conventional methods, enabling complementary insights for the study of ion-transport properties of electrode and electrolyte materials for advanced solid-state electrochemical devices. The proof of concept and strengths of isotope exchange Raman spectroscopy (IERS) is demonstrated by studying the oxygen isotope back-exchange in gadolinium-doped ceria (CGO) thin films. Resulting oxygen self-diffusion and surface exchange coefficients are compared to conventional time-of-flight secondary-ion mass spectrometry (ToF-SIMS) characterization and literature values, showing good agreement, while at the same time providing additional insight, challenging established assumptions. IERS captivates through its rapidity, simple setup, non-destructive nature, cost effectiveness, and versatile fields of application and thus can readily be integrated as new standard tool for in situ and operando characterization in many laboratories worldwide. The applicability of this method is expected to consolidate the understanding of elementary physicochemical processes and impact various emerging fields including solid oxide cells, battery research, and beyond.

Superior Thermoelectric Performance of SiGe Nanowires Epitaxially Integrated into Thermal Micro-Harvesters.

Semiconductor nanowires have demonstrated fascinating properties with applications in a wide range of fields, including energy and information technologies. Particularly, increasing attention has focused on SiGe nanowires for applications in a thermoelectric generation. In this work, a bottom-up vapour-liquid-solid chemical vapour Deposition methodology is employed to integrate heavily boron-doped SiGe nanowires on thermoelectric generators. Thermoelectrical properties -, i.e., electrical and thermal conductivities and Seebeck coefficient - of grown nanowires are fully characterized at temperatures ranging from 300 to 600 K, allowing the complete determination of the Figure-of-merit, zT, with obtained values of 0.4 at 600 K for optimally doped nanowires. A correlation between doping level, thermoelectric performance, and elemental distribution is established employing advanced elemental mapping (synchrotron-based nano-X-ray fluorescence). Moreover, the operation of p-doped SiGe NWs integrated into silicon micromachined thermoelectrical generators is shown over standalone and series- and parallel-connected arrays. Maximum open circuit voltage of 13.8 mV and power output as high as 15.6 µW cm-2 are reached in series and parallel configurations, respectively, operating upon thermal gradients generated with hot sources at 200 °C and air flows of 1.5 m s-1 . These results pave the way for direct application of SiGe nanowire-based micro-thermoelectric generators in the field of the Internet of Things.

Offline and online parameter estimation of nonlinear systems: Application to a solid oxide fuel cell system.

In this paper, an offline tuning strategy and an online parameter estimation method are exploited to calibrate the solid oxide fuel cell mathematical model. Different to existing offline tuning strategy, the developed strategy is designed in order to tune the model under various operation conditions. First, the particle swarm optimization method combined with the gradient-based search method is applied to tune unknown parameters in the state-space model and the steady-state model for each operation condition. Then, the sensitive parameters are expanded to the polynomial equations. Moreover, the reconstructed model including coefficients in the polynomial equations are determined by using the particle swarm optimization method with gradient-based search method for whole operation conditions. To show the slowly time-varying performance of a solid oxide fuel cell, an adaptive optimal learning law based on the optimization technology is proposed to online minimize a cost function with the information of the estimation error. The estimation error is extracted through several low-pass filters and simple algebraic calculation. Finally, the proposed offline tuning strategy and the developed online adaptive estimation method are verified by conducting experiments on a practical solid oxide fuel cell test bench.

Nanostructured La0.75Sr0.25Cr0.5Mn0.5O3-Ce0.8Sm0.2O2 Heterointerfaces as All-Ceramic Functional Layers for Solid Oxide Fuel Cell Applications.

The use of nanostructured interfaces and advanced functional materials opens up a new playground in the field of solid oxide fuel cells. In this work, we present two all-ceramic thin-film heterostructures based on samarium-doped ceria and lanthanum strontium chromite manganite as promising functional layers for electrode application. The films were fabricated by pulsed laser deposition as bilayers or self-assembled intermixed nanocomposites. The microstructural characterization confirmed the formation of dense, well-differentiated, phases and highlighted the presence of strong cation intermixing in the case of the nanocomposite. The electrochemical properties─solid/gas reactivity and in-plane conductivity─are strongly improved for both heterostructures with respect to the single-phase constituents under anodic conditions (up to fivefold decrease of area-specific resistance and 3 orders of magnitude increase of in-plane conductivity with respect to reference single-phase materials). A remarkable electrochemical activity was also observed for the nanocomposite under an oxidizing atmosphere, with no significant decrease in performance after 400 h of thermal aging. This work shows how the implementation of nanostructuring strategies not only can be used to tune the properties of functional films but also results in a synergistic enhancement of the electrochemical performance, surpassing the parent materials and opening the field for the fabrication of high-performance nanostructured functional layers for application in solid oxide fuel cells and symmetric systems.

Nanoscaled LiMn2O4 for Extended Cycling Stability in the 3 V Plateau.

Extending the potential window toward the 3 V plateau below the typically used range could boost the effective capacity of LiMn2O4 spinel cathodes. This usually leads to an "overdischarge" of the cathode, which can cause severe material damage due to manganese dissolution into the electrolyte and a critical volume expansion (induced by Jahn-Teller distortions). As those factors determine the stability and cycling lifetime for all-solid-state batteries, the operational window of LiMn2O4 is usually limited to 3.5-4.5 V versus Li/Li+ in common battery cells. However, it has been reported that nano-shaped particles and thin films can potentially mitigate these detrimental effects. We demonstrate here that porous LiMn2O4 thin-film cathodes with a certain level of off-stoichiometry show improved cycling stability for the extended cycling range of 2.0-4.5 V versus Li/Li+. We argue through operando spectroscopic ellipsometry that the origin of this stability lies in the surprisingly small volume change in the layer during lithiation.

Recipes for superior ionic conductivities in thin-film ceria-based electrolytes.

We employed Molecular Dynamics (MD) and Metropolis Monte Carlo (MMC) simulations to determine the oxide-ion mobility uO in Ce1-yGdyO2-y/2 (y = 0.02, 0.1, 0.2) for the range of temperatures 1400 ≤ T/K ≤ 2000 and field strengths 0.6 ≤ E/MV cm-1 ≤ 15.0. Direct, unambiguous determination of uO(E) from MD simulations is shown to require examination of the ions' mean displacement as a function of time. MD simulations were performed for random distributions of Gd cations and equilibrium distributions obtained by MMC calculations. All uO(E,T,y) data obtained can be described by an (empirically augmented) analytical model with four zero-field parameters, a result that allows data to be extrapolated down to the temperatures of electrolyte operation. Specifically, the oxide-ion conductivity is predicted, for example at T = 700 K, (i) to be up to 101 higher for a random distribution of Gd than for an equilibrium distribution; and (ii) to be a factor of 100.8 higher for a 6 nm thin film than for a µm-thick sample under a potential difference of 1 V. By virtue of non-equilibrium deposition and nm-thick samples, thin films thus provide two new recipes for attaining even higher oxide-ion conductivities in ceria-based electrolytes.

Ion Intercalation in Lanthanum Strontium Ferrite for Aqueous Electrochemical Energy Storage Devices.

Ion intercalation of perovskite oxides in liquid electrolytes is a very promising method for controlling their functional properties while storing charge, which opens up its potential application in different energy and information technologies. Although the role of defect chemistry in oxygen intercalation in a gaseous environment is well established, the mechanism of ion intercalation in liquid electrolytes at room temperature is poorly understood. In this study, the defect chemistry during ion intercalation of La0.5Sr0.5FeO3-δ thin films in alkaline electrolytes is studied. Oxygen and proton intercalation into the La1-xSrxFeO3-δ perovskite structure is observed at moderate electrochemical potentials (0.5 to -0.4 V), giving rise to a change in the oxidation state of Fe (as a charge compensation mechanism). The variation of the concentration of holes as a function of the intercalation potential is characterized by in situ ellipsometry, and the concentration of electron holes is indirectly quantified for different electrochemical potentials. Finally, a dilute defect chemistry model that describes the variation of defect species during ionic intercalation is developed.

On the thermoelectric properties of Nb-doped SrTiO3 epitaxial thin films.

The exploration for thermoelectric thin films of complex oxides such as SrTiO3-based oxides is driven by the need for miniaturized harvesting devices for powering the Internet of Things (IoT). However, there is still not a clear consensus in the literature for the underlying influence of film thickness on thermoelectric properties. Here, we report the fabrication of epitaxial thin films of 6% Nb-doped SrTiO3 on (001) (LaAlO3)0.3(Sr2AlTaO6)0.7 (LSAT) single crystal using pulsed laser deposition (PLD) where the film thickness was varied from 2 nm to 68 nm. The thickness dependence shows a subtle increase of tetragonality of the thin film lattice and a gradual drop of the electrical conductivity, the density of charge carriers, and the thermoelectric Seebeck coefficient as the film thickness decreases. DFT-based calculations show that ∼2.8% increase in tetragonality results in an increased splitting between t2g and eg orbitals to ∼42.3 meV. However, experimentally observed tetragonality for films between 68 to 13 nm is only 0.06%. Hence, the effect of thickness on tetragonality is neglected. We have discussed the decrease of conductivity and the Seebeck coefficient based on the decrease of carriers and change in the scattering mechanism, respectively.

Solid Oxide Cell Electrode Nanocomposites Fabricated by Inkjet Printing Infiltration of Ceria Scaffolds.

The enhancement of solid oxide cell (SOC) oxygen electrode performance through the generation of nanocomposite electrodes via infiltration using wet-chemistry processes has been widely studied in recent years. An efficient oxygen electrode consists of a porous backbone and an active catalyst, which should provide ionic conductivity, high catalytic activity and electronic conductivity. Inkjet printing is a versatile additive manufacturing technique, which can be used for reliable and homogeneous functionalization of SOC electrodes via infiltration for either small- or large-area devices. In this study, we implemented the utilization of an inkjet printer for the automatic functionalization of different gadolinium-doped ceria scaffolds, via infiltration with ethanol:water-based La1-xSrxCo1-yFeyO3-δ (LSCF) ink. Scaffolds based on commercial and mesoporous Gd-doped ceria (CGO) powders were used to demonstrate the versatility of inkjet printing as an infiltration technique. Using yttrium-stabilized zirconia (YSZ) commercial electrolytes, symmetrical LSCF/LSCF-CGO/YSZ/LSCF-CGO/LSCF cells were fabricated via infiltration and characterized by SEM-EDX, XRD and EIS. Microstructural analysis demonstrated the feasibility and reproducibility of the process. Electrochemical characterization lead to an ASR value of ≈1.2 Ω cm2 at 750 °C, in the case of nanosized rare earth-doped ceria scaffolds, with the electrode contributing ≈0.18 Ω cm2. These results demonstrate the feasibility of inkjet printing as an infiltration technique for SOC fabrication.

Cation non-stoichiometry in Fe:SrTiO3 thin films and its effect on the electrical conductivity.

The interplay of structure, composition and electrical conductivity was investigated for Fe-doped SrTiO3 thin films prepared by pulsed laser deposition. Structural information was obtained by reciprocal space mapping while solution-based inductively-coupled plasma optical emission spectroscopy and positron annihilation lifetime spectroscopy were employed to reveal the cation composition and the predominant point defects of the thin films, respectively. A severe cation non-stoichiometry with Sr vacancies was found in films deposited from stoichiometric targets. The across plane electrical conductivity of such epitaxial films was studied in the temperature range of 250-720 °C by impedance spectroscopy. This revealed a pseudo-intrinsic electronic conductivity despite the substantial Fe acceptor doping, i.e. conductivities being several orders of magnitude lower than expected. Variation of PLD deposition parameters causes some changes of the cation stoichiometry, but the films still have conductivities much lower than expected. Targets with significant Sr excess (in the range of several percent) were employed to improve the cation stoichiometry in the films. The use of 7% Sr-excess targets resulted in near-stoichiometric films with conductivities close to the stoichiometric bulk counterpart. The measurements show that a fine-tuning of the film stoichiometry is required in order to obtain acceptor doped SrTiO3 thin films with bulk-like properties. One can conclude that, although reciprocal space maps give a first hint whether or not cation non-stoichiometry is present, conductivity measurements are more appropriate for assessing SrTiO3 film quality in terms of cation stoichiometry.

Direct Measurement of Oxygen Mass Transport at the Nanoscale.

Tuning oxygen mass transport properties at the nanoscale offers a promising approach for developing high performing energy materials. A number of strategies for engineering interfaces with enhanced oxygen diffusivity and surface exchange have been proposed. However, the origin and the magnitude of such local effects remain largely undisclosed to date due to the lack of direct measurement tools with sufficient resolution. In this work, atom probe tomography with sub-nanometer resolution is used to study oxygen mass transport on oxygen-isotope exchanged thin films of lanthanum chromite. A direct 3D visualization of nanoscaled highly conducting oxygen incorporation pathways along grain boundaries, with reliable quantification of the oxygen kinetic parameters and correlative link to local chemistries, is presented. Combined with finite element simulations of the exact nanostructure, isotope exchange-atom probe tomography allowed quantifying an enhancement in the grain boundary oxygen diffusivity and in the surface exchange coefficient of lanthanum chromite of about 4 and 3 orders of magnitude, respectively, compared to the bulk. This remarkable increase of the oxygen kinetics in an interface-dominated material is unambiguously attributed to grain boundary conduction highways thanks to the use of a powerful technique that can be straightforwardly extended to the study of currently inaccessible multiple nanoscale mass transport phenomena.

Thermal conductivity of individual Si and SiGe epitaxially integrated NWs by scanning thermal microscopy.

Semiconductor nanowires have demonstrated fascinating properties with application in a wide range of fields including energy and information technologies. In particular, increasing attention has been focused on Si and SiGe nanowires for application in thermoelectric generation after recent successful implementation in miniaturized devices. Despite this interest, an appropriate evaluation of thermal conductivity in such nanostructures still poses a great challenge, especially if the characterization of the device-integrated nanowire is desired. In this work, a spatially resolved technique based on scanning thermal microscopy has been demonstrated for the assessment of the thermal conductivity of Si and SiGe nanowires integrated in thermoelectrical microgenerators. Thermal conductivity values of 15.8 ± 0.8 W m-1 K-1 and 4.2 ± 0.3 W m-1 K-1 were measured for Si and SiGe nanowires, respectively, epitaxially grown on silicon microstructures. Moreover, the range of applicability according to the sample thermal conductance and associated errors are discussed to establish the potential of the novel technique. The results presented here show the remarkable utility of scanning thermal microscopy for the challenging thermal characterization of integrated nanostructures and the development of multiple devices such as thermoelectric generators or photovoltaic cells.

Transitioning from Si to SiGe Nanowires as Thermoelectric Material in Silicon-Based Microgenerators.

The thermoelectric performance of nanostructured low dimensional silicon and silicon-germanium has been functionally compared device-wise. The arrays of nanowires of both materials, grown by a VLS-CVD (Vapor-Liquid-Solid Chemical Vapor Deposition) method, have been monolithically integrated in a silicon micromachined structure in order to exploit the improved thermoelectric properties of nanostructured silicon-based materials. The device architecture helps to translate a vertically occurring temperature gradient into a lateral temperature difference across the nanowires. Such thermocouple is completed with a thin film metal leg in a unileg configuration. The device is operative on its own and can be largely replicated (and interconnected) using standard IC (Integrated Circuits) and MEMS (Micro-ElectroMechanical Systems) technologies. Despite SiGe nanowires devices show a lower Seebeck coefficient and a higher electrical resistance, they exhibit a much better performance leading to larger open circuit voltages and a larger overall power supply. This is possible due to the lower thermal conductance of the nanostructured SiGe ensemble that enables a much larger internal temperature difference for the same external thermal gradient. Indeed, power densities in the µW/cm2 could be obtained for such devices when resting on hot surfaces in the 50-200 °C range under natural convection even without the presence of a heat exchanger.

Route to High-Performance Micro-solid Oxide Fuel Cells on Metallic Substrates.

Micro-solid oxide fuel cells based on thin films have strong potential for use in portable power devices. However, devices based on silicon substrates typically involve thin-film metallic electrodes which are unstable at high temperatures. Devices based on bulk metal substrates overcome these limitations, though performance is hindered by the challenge of growing state-of-the-art epitaxial materials on metals. Here, we demonstrate for the first time the growth of epitaxial cathode materials on metal substrates (stainless steel) commercially supplied with epitaxial electrolyte layers (1.5 µm (Y2O3)0.15(ZrO2)0.85 (YSZ) + 50 nm CeO2). We create epitaxial mesoporous cathodes of (La0.60Sr0.40)0.95Co0.20Fe0.80O3 (LSCF) on the substrate by growing LSCF/MgO vertically aligned nanocomposite films by pulsed laser deposition, followed by selectively etching out the MgO. To enable valid comparison with the literature, the cathodes are also grown on single-crystal substrates, confirming state-of-the-art performance with an area specific resistance of 100 Ω cm2 at 500 °C and activation energy down to 0.97 eV. The work marks an important step toward the commercialization of high-performance micro-solid oxide fuel cells for portable power applications.

Engineering Transport in Manganites by Tuning Local Nonstoichiometry in Grain Boundaries.

Interface-dominated materials such as nanocrystalline thin films have emerged as an enthralling class of materials able to engineer functional properties of transition metal oxides widely used in energy and information technologies. In particular, it has been proven that strain-induced defects in grain boundaries of manganites deeply impact their functional properties by boosting their oxygen mass transport while abating their electronic and magnetic order. In this work, the origin of these dramatic changes is correlated for the first time with strong modifications of the anionic and cationic composition in the vicinity of strained grain boundary regions. We are also able to alter the grain boundary composition by tuning the overall cationic content in the films, which represents a new and powerful tool, beyond the classical space charge layer effect, for engineering electronic and mass transport properties of metal oxide thin films useful for a collection of relevant solid-state devices.

Large-area and adaptable electrospun silicon-based thermoelectric nanomaterials with high energy conversion efficiencies.

Large amounts of waste heat generated in our fossil-fuel based economy can be converted into useful electric power by using thermoelectric generators. However, the low-efficiency, scarcity, high-cost and poor production scalability of conventional thermoelectric materials are hindering their mass deployment. Nanoengineering has proven to be an excellent approach for enhancing thermoelectric properties of abundant and cheap materials such as silicon. Nevertheless, the implementation of these nanostructures is still a major challenge especially for covering the large areas required for massive waste heat recovery. Here we present a family of nano-enabled materials in the form of large-area paper-like fabrics made of nanotubes as a cost-effective and scalable solution for thermoelectric generation. A case study of a fabric of p-type silicon nanotubes was developed showing a five-fold improvement of the thermoelectric figure of merit. Outstanding power densities above 100 W/m2 at 700 °C are therefore demonstrated opening a market for waste heat recovery.