Effect of Dentin Contamination with Hemostatic Agents and Cleaning Techniques on Bonding with Self-Adhesive Resin Cement.

BACKGROUND Dentin contamination with hemostatic agents before bonding indirect restorations negatively affects the bond strength. However, the consensus on which materials could be used to clean contamination of hemostatic agents has not been explored. The aim of this study was to assess the effect of Katana Cleaner applied on the surface of dentin contaminated with hemostatic agents on the shear bond strength (SBS) of self-adhesive resin cement by comparing it with three other surface cleaners. MATERIAL AND METHODS Ninety dentin specimens were divided into a no contamination group (control) (n=10), 4 groups contaminated with 25% aluminum chloride (Viscostat Clear) (n=40), and 4 groups contaminated with 20% ferric sulfate (Viscostat) (n=40). Subsequently, 4 different cleaners were used for each contamination group (water rinse, phosphoric acid, chlorhexidine, and Katana Cleaner). Then, self-adhesive resin cement was directly bonded to the treated surfaces. All specimens were subjected to 5000 thermal cycles of artificial aging. The shear bond strength was measured using a universal testing machine. RESULTS Two-way analysis of variance showed that the contaminant type as the main factor was statistically non-significant (p=0.655), cleaner type as the main factor was highly significant (p<0.001), and interaction between the contaminant and cleaner was non-significant (p=0.51). The cleaner type was the main factor influencing the bond strength. Phosphoric acid and chlorhexidine showed better performance than Katana Cleaner. CONCLUSIONS Cleaning dentin surface contamination with phosphoric acid and chlorhexidine had better performance than with Katana Cleaner.

Cupping Therapy as a Potential Complimentary Treatment for Meniere's Disease: A Case Report.

Meniere's disease is defined by the presence of three essential symptoms: episodic vertigo, tinnitus, and sensorineural hearing loss. The mainstay of its management constitutes lifestyle modification and medical and surgical therapies. Cupping therapy is an ancient treatment that is still widely used especially in the Middle East, Africa, and the United Kingdom. This study portraits the case of a 54-year-old patient suffering from long-standing Meniere's disease. The patient was treated with the routine treatment that was to no avail. It was decided that the patient undergoes cupping therapy. Over two years of monthly cupping therapy sessions, the patient reported a decrease in intensity and frequency of symptoms until its disappearance. Cupping therapy has shown a positive outcome on the patient. According to our search, there is a previous case report published in 2020 that shares multiple similarities with our case. Further studies on cupping therapy and its efficacy, mechanism of action, and complications on a larger scale are advised.

Reduced-Dose Thrombolysis in Acute Pulmonary Embolism A Systematic Review.

Pulmonary embolism (PE) is the third-leading cause of cardiovascular mortality and the second-leading cause of death in cancer patients. The clinical efficacy of thrombolysis for acute PE has been proven, yet the therapeutic window seems narrow, and the optimal dosing for pharmaceutical reperfusion therapy has not been established. Higher doses of systemic thrombolysis inevitably associated with an incremental increase in major bleeding risk. To date, there is no high-quality evidence regarding dosing and infusion rates of thrombolytic agents to treat acute PE. Most clinical trials have focused on thrombolysis compared with anticoagulation alone, but dose-finding studies are lacking. Evidence is now emerging that lower-dose thrombolytic administered through a peripheral vein is efficacious in accelerating thrombolysis in the central pulmonary artery and preventing acute right heart failure, with reduced risk for major bleeding. The present review will systematically summarize the current evidence of low-dose thrombolysis in acute PE.

The effect of salbutamol sulphate inhalation (an anti-asthmatic medication) on the surfaces of orthodontic Archwires.

OBJECTIVES: This study aimed to compare the surface roughness and friction of different orthodontic archwires after exposure to salbutamol sulphate inhalation, an anti-asthmatic medication. METHODS: Orthodontic archwires (stainless-steel [StSt], nickel-titanium [NiTi], beta-titanium [ß-Ti], and copper-NiTi [Cu-NiTi]) were equally divided into two groups. The exposed groups were subjected to 20 mg salbutamol sulphate for 21 days and kept in artificial saliva. The control groups were only kept in artificial saliva. Surface changes were visualized using scanning electron microscopy (SEM). The average surface roughness (Ra) was evaluated using atomic force microscopy (AFM), and friction resistance forces were assessed using a universal testing machine. Statistical analyses were performed using t-tests and ANOVA followed by post hoc tests. RESULTS: Salbutamol sulphate did not change the surface roughness of StSt and NiTi archwires (p > .05). However, the change in the surfaces of ß-Ti and Cu-NiTi archwires was significant (p < .001). The frictional forces of exposed StSt, NiTi, and Cu-NiTi archwires did not change (p > .05). However, the frictional forces of ß-Ti archwires increased significantly after exposure to salbutamol sulphate (p = .021). Brushing with fluoride after exposure to salbutamol sulphate increased the frictional forces of ß-Ti only (p = .002). CONCLUSIONS: Salbutamol sulphate inhalation significantly affected the surface texture of ß-Ti and Cu-NiTi orthodontic archwires and increased the friction of ß-Ti archwires. These deteriorating effects were not detected on the surface of StSt and NiTi archwires. Therefore, we suggest that ß-Ti and copper titanium archwires should be used cautiously in individuals under salbutamol sulphate inhalation treatment.

Prevalence and Severity of Ectopic Eruption of First Permanent Molars in Pediatric Patients in Makkah, Saudi Arabia.

Background Early detection and management of ectopic eruption (EE) of first permanent molars (FPMs) are crucial to avoid complicated treatments later. Aim This study aimed to assess the prevalence and severity of EE of FPMs among children in Makkah, Saudi Arabia. Methods This retrospective study was based on a radiographic evaluation of 1,008 dental panoramic radiographs performed for children attending the Dental Educational Hospital at Umm Al-Qura University and the Security Forces Hospital in Makkah. Patients' age, sex, tooth location, and severity of EE were assessed. The study adhered to the Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) guideline for cross-sectional studies.  Results Of the 1,008 reviewed cases, 18 (1.79%) were diagnosed with EE of FPMs. Among the 11 male patients, 81.82% showed severe EE, while 57.14% exhibited moderately severe EE among the seven female patients. The prevalences of EE in the maxilla and mandible were 1.59% and 0.20%, respectively. In contrast, the occurrence of EE of FPMs was similar between the right and left sides. Conclusion In this study, the prevalence of EE of FPMs among children in Makkah was 1.79%. The frequency and severity were both greater in male patients compared to female patients. While significantly more EE of FPMs was observed in the maxilla than in the mandible, there was no significant difference between the right and left sides.

Transcriptomics and proteomics reveal distinct biology for lymph node metastases and tumour deposits in colorectal cancer.

Both lymph node metastases (LNMs) and tumour deposits (TDs) are included in colorectal cancer (CRC) staging, although knowledge regarding their biological background is lacking. This study aimed to compare the biology of these prognostic features, which is essential for a better understanding of their role in CRC spread. Spatially resolved transcriptomic analysis using digital spatial profiling was performed on TDs and LNMs from 10 CRC patients using 1,388 RNA targets, for the tumour cells and tumour microenvironment. Shotgun proteomics identified 5,578 proteins in 12 different patients. Differences in RNA and protein expression were analysed, and spatial deconvolution was performed. Image-based consensus molecular subtype (imCMS) analysis was performed on all TDs and LNMs included in the study. Transcriptome and proteome profiles identified distinct clusters for TDs and LNMs in both the tumour and tumour microenvironment segment, with upregulation of matrix remodelling, cell adhesion/motility, and epithelial-mesenchymal transition (EMT) in TDs (all p < 0.05). Spatial deconvolution showed a significantly increased abundance of fibroblasts, macrophages, and regulatory T-cells (p < 0.05) in TDs. Consistent with a higher fibroblast and EMT component, imCMS classified 62% of TDs as poor prognosis subtype CMS4 compared to 36% of LNMs (p < 0.05). Compared to LNMs, TDs have a more invasive state involving a distinct tumour microenvironment and upregulation of EMT, which are reflected in a more frequent histological classification of TDs as CMS4. These results emphasise the heterogeneity of locoregional spread and the fact that TDs should merit more attention both in future research and during staging. © 2023 The Authors. The Journal of Pathology published by John Wiley & Sons Ltd on behalf of The Pathological Society of Great Britain and Ireland.

Person Re-Identification Using Local Relation-Aware Graph Convolutional Network.

Local feature extractions have been verified to be effective for person re-identification (re-ID) in recent literature. However, existing methods usually rely on extracting local features from single part of a pedestrian while neglecting the relationship of local features among different pedestrian images. As a result, local features contain limited information from one pedestrian image, and cannot benefit from other pedestrian images. In this paper, we propose a novel approach named Local Relation-Aware Graph Convolutional Network (LRGCN) to learn the relationship of local features among different pedestrian images. In order to completely describe the relationship of local features among different pedestrian images, we propose overlap graph and similarity graph. The overlap graph formulates the edge weight as the overlap node number in the node's neighborhoods so as to learn robust local features, and the similarity graph defines the edge weight as the similarity between the nodes to learn discriminative local features. To propagate the information for different kinds of nodes effectively, we propose the Structural Graph Convolution (SGConv) operation. Different from traditional graph convolution operations where all nodes share the same parameter matrix, SGConv learns different parameter matrices for the node itself and its neighbor nodes to improve the expressive power. We conduct comprehensive experiments to verify our method on four large-scale person re-ID databases, and the overall results show LRGCN exceeds the state-of-the-art methods.

Content-Seam-Preserving Multi-Alignment Network for Visual-Sensor-Based Image Stitching.

As an important representation of scenes in virtual reality and augmented reality, image stitching aims to generate a panoramic image with a natural field-of-view by stitching multiple images together, which are captured by different visual sensors. Existing deep-learning-based methods for image stitching only conduct a single deep homography to perform image alignment, which may produce inevitable alignment distortions. To address this issue, we propose a content-seam-preserving multi-alignment network (CSPM-Net) for visual-sensor-based image stitching, which could preserve the image content consistency and avoid seam distortions simultaneously. Firstly, a content-preserving deep homography estimation was designed to pre-align the input image pairs and reduce the content inconsistency. Secondly, an edge-assisted mesh warping was conducted to further align the image pairs, where the edge information is introduced to eliminate seam artifacts. Finally, in order to predict the final stitched image accurately, a content consistency loss was designed to preserve the geometric structure of overlapping regions between image pairs, and a seam smoothness loss is proposed to eliminate the edge distortions of image boundaries. Experimental results demonstrated that the proposed image-stitching method can provide favorable stitching results for visual-sensor-based images and outperform other state-of-the-art methods.

Effect of Repressing Lithium Disilicate Glass Ceramics on The Shear Bond Strength of Resin Cements.

The aim of this study was to investigate the effect of repeated pressing of lithium disilicate ceramic on the shear bond strength (SBS) of three types of resin cement. METHODOLOGY: A lithium disilicate ceramic (IPS e.max® Press) was first heat-pressed to form rectangular disk specimens. Then, leftovers were used for the second and third presses. A total of 90 specimens were prepared and separated, according to the number of pressing cycles, into three groups: 1st, 2nd, and 3rd presses (n = 30). Each group was further subdivided into three groups (n = 10) according to the type of resin cement used, as follows: Multilink N (MN), Variolink Esthetic DC (VDC), and Variolink Esthetic LC (VLC). All the cement was bonded to the ceramic surface, which was etched with hydrofluoric acid and primed with Monobond Plus. All samples were light-cured and stored for 24 h. Shear bond strength was tested on a universal testing machine. RESULTS: A two-way ANOVA was used to evaluate the influence of repeated pressing cycles and cement type as well as their interaction. The results indicated that cement type has a significant impact (p < 0.001) but not the number of pressing cycles (p = 0.970) or their interaction (p = 0.836). The Bonferroni post-hoc test showed that the SBS of MN was significantly higher than that of VDC and VLC in the first press and second press cycles, respectively. The SBS of MN was significantly higher than that of VDC and VLC cements in the third pressing cycle. There was no significant difference in the SBS between VLC and VDC in all three pressing cycles. CONCLUSION: The results of the current study did not report a detrimental effect of repeated pressing up to three cycles on the shear bond strength of the IPS e.max® Press. Multilink resin cement showed the highest SBS to IPS e.max® Press at the third pressing cycle. For all types of cement and heat pressing cycles, the majority of cement failures were adhesive. No cohesive failures occurred in any of the tested resin cements, regardless of the cement type or the number of heat pressing cycles tested.

Role of meteorological parameters with the spread of Covid-19 in Pakistan: application of autoregressive distributed lag approach.

This research focuses on the impacts of different meteorological parameters (temperature, humidity, rainfall, and evapotranspiration) on the transmission of Covid-19 in the administrative regions and provinces of Pakistan, i.e., Azad Jammu and Kashmir, Gilgit Baltistan, Khyber Pakhtunkhwa, Islamabad, Punjab, Sindh, and Balochistan from June 10, 2020, to August 31, 2021. This study analyzes the relation between Covid-19-confirmed cases and the meteorological parameters with the help of the autoregressive distributed lag model. In this research, additional tools (t-statistics, f-statistics, and time series analysis) are used for the motive of examining the linear relationship, the productivity of the model, and for the significant association between dependent and independent variables, lnccc and lnevp, lnhum, lnrain, lntemp, respectively. Values of t-statistics and f-statistics reveal that variables have a connection and individual significance for the model exist. Time series display that the Covid-19 spread increased from June 10, 2020, to August 31, 2021, in Pakistan. Temperature positively influenced the Covid-19-confirmed cases in all provinces of Pakistan in the long run. Evapotranspiration and rainfall influenced positively, while specific humidity influenced negatively on the confirmed Covid-19 cases in Azad Jammu Kashmir, Khyber Pakhtunkhwa, and Punjab. Specific humidity had a positive impact, while evapotranspiration and rainfall had the negative impact on the Covid-19-confirmed cases in Sindh and Balochistan. Evapotranspiration and specific humidity influenced positively, while rainfall influenced the Covid-19-confirmed cases negatively in Gilgit Baltistan. Evapotranspiration influenced positively, while specific humidity and rainfall influenced negatively on the Covid-19-confirmed cases in Islamabad. Supplementary Information: The online version contains supplementary material available at 10.1007/s13762-023-04997-4.

Low-Dose Alteplase versus Conventional Anticoagulation to treat Submassive Pulmonary Embolism in Hispanic Patients.

The use of low-dose tissue plasminogen activator (tPA) in Hispanic patients with submassive pulmonary embolism (PE) is understudied. The purpose of this study is to explore the use of low-dose tPA in Hispanic patients with submissive PE compared with counterparts that received heparin alone. We retrospectively analyzed a single-center registry of patients with acute PE between 2016 and 2022. Out of 72 patients admitted for acute PE and cor pulmonale, we identified six patients that were treated with conventional anticoagulation (heparin alone) and six patients who received low-dose tPA (and heparin afterward). We analyzed if low-dose tPA was associated with differences in length of stay (LOS) and bleeding complications. Both groups were similar in regard to age, gender, and PE severity (based on Pulmonary Embolism Severity Index scores). Mean total LOS for the low-dose tPA group was 5.3 days, compared with 7.3 days in the heparin group ( p = 0.29). Mean intensive care unit (ICU) LOS for the low-dose tPA group was 1.3 days compared with 3 days in the heparin group ( p = 0.035). There were no clinically relevant bleeding complications documented in either the heparin or the low-dose tPA group. Low-dose tPA for submassive PE in Hispanic patients was associated with a shorter ICU LOS without a significant increase in bleeding risk. Low-dose tPA appears to be a reasonable treatment option in Hispanic patients with submassive PE who are not at high bleeding risk (<5%).

Cross-Modality Person Re-Identification via Local Paired Graph Attention Network.

Cross-modality person re-identification (ReID) aims at searching a pedestrian image of RGB modality from infrared (IR) pedestrian images and vice versa. Recently, some approaches have constructed a graph to learn the relevance of pedestrian images of distinct modalities to narrow the gap between IR modality and RGB modality, but they omit the correlation between IR image and RGB image pairs. In this paper, we propose a novel graph model called Local Paired Graph Attention Network (LPGAT). It uses the paired local features of pedestrian images from different modalities to build the nodes of the graph. For accurate propagation of information among the nodes of the graph, we propose a contextual attention coefficient that leverages distance information to regulate the process of updating the nodes of the graph. Furthermore, we put forward Cross-Center Contrastive Learning (C3L) to constrain how far local features are from their heterogeneous centers, which is beneficial for learning the completed distance metric. We conduct experiments on the RegDB and SYSU-MM01 datasets to validate the feasibility of the proposed approach.

A novel research method to measure the usage of web-based information.

This research method contributes to the literature by measuring commensurably 'the usage of information for (or web traffic on) web-based research studies'. The introduced method deepens the understanding the functionality of online media by focusing on specific web metrics to make the usage of this type of media efficient for disclosure function. The inputs of new method are originally based on publicly available data, and it can be applied through 3 consecutive steps. Accordingly, this method is applicable to assess stakeholders' engagement for any web-based research study. In sum, this method presents:•The inputs of the method are publicly available data.•This method is applicable for variety web-based research studies regardless of the applied methodological approach (e.g., qualitative, quantitative).

A retrospective cohort study on the use of machine learning to predict stone-free status following percutaneous nephrolithotomy: An experience from Saudi Arabia.

Background: Machine learning techniques have been used extensively in the field of clinical medicine, especially when used for the construction of prediction models. The aim of the study was to use machine learning to predict the stone-free status after percutaneous nephrolithotomy (PCNL). Materials and methods: This is a retrospective cohort study of 137 patients. Data from adult patients who underwent PCNL at our institute were used for the purpose of this study. Three supervised machine learning algorithms were employed: Logistic Regression, XGBoost Regressor, and Random Forests. A set of variables comprising independent attributes including age, gender, body mass index (BMI), chronic kidney disease (CKD), hypertension (HTN), diabetes mellitus, gout, renal and stone factors (previous surgery, stone location, size, and staghorn status), and pre-operative surgical factors (infections, stent, hemoglobin, creatinine, and bacteriuria) were entered. Results: 137 patients were identified. The majority were males (65.4%; n = 89), aged 50 years and above (41.9%; n = 57). The stone-free status (SFS) rate was 86% (n = 118). An inverse relation was detected between SFS, and CKD and HTN. The accuracies were 71.4%, 74.5% and 75% using Logistic Regression, XGBoost, and Random Forest algorithms, respectively. Stone size, pre-operative hemoglobin, pre-operative creatinine, and stone type were the most important factors in predicting the SFS following PCNL. Conclusion: The Random Forest model showed the highest efficacy in predicting SFS. We developed an effective machine learning model to assist physicians and other healthcare professionals in selecting patients with renal stones who are most likely to have successful PCNL treatment based on their demographics and stone characteristics. Larger multicenter studies are needed to develop more powerful algorithms, such as deep learning and other AI subsets.

Diagnosis and Management of a Patient With 5-Fluorouracil-Induced ST Elevation and Nonsustained Ventricular Tachycardia as a Late Presentation of Cardiotoxicity and Successful 5-Fluorouracil Rechallenge.

5-fluorouracil (5-FU) is an antimetabolite drug that is used in the treatment of a variety of carcinomas, including breast, gastric, pancreatic, colon, and rectal cancers. It is usually administered to decelerate and prohibit cancer cell proliferation. It acts by inhibiting the enzyme thymidylate synthase by blocking thymidine formation required for deoxyribonucleic acid (DNA) synthesis. The most common clinical manifestation of 5-FU cardiotoxicity is chest pain related to coronary vasospasm. Patients experiencing cardiotoxicity induced by 5-FU present with signs and symptoms of acute coronary syndromes with elevated cardiac biomarkers (troponin), and their ECGs often reveal ST segment changes. There can be two distinct clinical presentations, early or late presentation of cardiotoxicity. Early toxicity can occur during the infusion, whereas late presentation of toxicity can occur 1-2 days after the infusion. Usually, with early toxicity, troponin elevation may be evident. However, in late presentation of cardiotoxicity symptoms, troponin elevation and/or ECG changes may be undetectable. Our case has a unique presentation of 5-FU toxicity in a patient developing ST elevation and non-sustained ventricular tachycardia (VT) as a late presentation of cardiotoxicity.

The Effect of Repeated Pressing on the Flexural Strength, Color Stability, Vickers Hardness, and Surface Topography of Heat-Pressed Lithium Disilicate.

The aim of this study was to investigate the effect of repressing leftover heat-pressed lithium disilicate material on its mechanical and optical properties. A lithium disilicate ingot (IPS e.max® Press, IvoclarVivadent, Schaan, Liechtenstein) shade (A1) low translucency was first heat-pressed to yield ceramic bars and disks. Then, the second and third presses were fabricated from the leftovers of the previous pressing cycles. A total of 36 bars and 15 disk specimens were fabricated and divided into three groups according to the number of pressing cycles (n = 12 bars and n = 5 disks): P1: first press (control), P2: second press, and P3: third press. The specimens were tested for flexural strength, color change, Vickers hardness, and surface topography under scanning electron microscopy. One-way ANOVA testing was used to evaluate flexural strength and hardness, while an independent t-test was performed to evaluate color change. There was no significant difference in flexural strength as the number of heat-pressed cycles increased (p = 0.283). Similarly, there was no significant difference in the microhardness values between all groups (p = 0.220). The overall color change ∆E between P1-P2 and P1-P3 were 2.01 and 2.14, respectively. The SEM images showed evenly distributed and densely packed lithium disilicate crystals in the P1 group. However, larger and less densely packed crystals were noticeable in P2 and P3. The IPS e.max Press could be repressed up to two times without an adverse effect on mechanical properties or color stability. These results may support the reuse of pressed lithium disilicate for economical purposes, but further clinical evaluation should be conducted to confirm these findings.

Radiological Determinants of Thromboembolic Events in COVID-19 Pneumonia: A Retrospective Study.

Background It has been established that patients with COVID-19 pneumonia are more vulnerable to developing thromboembolic complications. Computed tomography (CT) scan of the chest is an essential investigation modality in patients with COVID-19 pneumonia and has an important role in the diagnosis and identification of complications. Methods A retrospective observational study was conducted on patients admitted with COVID-19 pneumonia who underwent CT scans of the chest. The data regarding demographic information, clinical information, and CT findings were collected from electronic health records. Multivariable regression analysis was used to identify the independent factors associated with thromboembolic complications. Results The study included a total of 276 patients, including 178 (64.5%) men and 98 (35.5%) women. In total, 64 patients were found to have thromboembolic events, yielding a complication rate of 23.2%. Multivariable logistic regression revealed that patients aged 51-65 years (Odds ratio [OR] = 8.9; 95% confidence interval [CI]: 3.0-26.5) and >65 years (OR = 18.7; 95% CI: 7.6-46.1) had a higher likelihood of having thromboembolic complications compared to those aged 18-35 years. Further, the crazy-paving appearance of opacity was identified as an independent factor associated with thromboembolic events (OR = 14.2; 95% CI: 6.9-29.4). Further, patients with severe pulmonary parenchymal involvement were 30 times (OR = 30.6; 95% CI: 9.8-95.5) more likely to have thromboembolic complications compared with those having mild involvement. Conclusions The radiological findings on the CT scan of the chest can provide crucial prognostic information for patients with COVID-19 in terms of thromboembolic events. Clinicians need to keep a high index of suspicion for pulmonary embolism and deep venous thrombosis when they encounter patients with crazy-paving opacity appearances on CT scans, particularly among patients with severe parenchymal involvement.

Extended Reality-Assisted Surgery as a Surgical Training Tool: Pilot Study Presenting First HoloLens-Assisted Complex Penile Revision Surgery.

BACKGROUND: Extended reality-assisted urologic surgery (XRAS) is a novel technology that superimposes a computer-generated image on the physician's field to integrate common elements of the surgical process in more advanced detail. An extended reality (XR) interface is generated using optical head-mounted display (OHMD) devices. AIM: To present the first case of HoloLens-assisted complex penile revision surgery. METHODS: We describe our pilot study of HoloLens-assisted penile revision surgery and present a thorough review of the literature regarding XRAS technology and innovative OHMD devices. OUTCOMES: The ability of XRAS technology to superimpose a computer-generated image of the patient and integrate common elements of the surgical planning process with long-distance experts. RESULTS: XRAS is a feasible technology for application in complex penile surgical planning processes. CLINICAL TRANSLATION: XRAS and OHMD devices are novel technologies applicable to urological surgical training and planning. STRENGTHS AND LIMITATIONS: Evidence suggests that the potential use of OHMD devices is safe and beneficial for surgeons. We intend to pioneer HoloLens technology in the surgical planning process of a malfunctioning penile implant due to herniation of the cylinder. This novel technology has not been used in prosthetic surgery, and current data about XRAS are limited. CONCLUSION: OHMD devices are effective in the operative setting. Herein, we successfully demonstrated the integration of Microsoft HoloLens 2 into a penile surgical planning process for the first time. Further development and studies for this technology are necessary to better characterize the XRAS as a training and surgical planning tool. Quesada-Olarte J, Carrion RE, Fernandez-Crespo R, et al. Extended Reality-Assisted Surgery as a Surgical Training Tool: Pilot Study Presenting First HoloLens-Assisted Complex Penile Revision Surgery. J Sex Med 2022;19:1580-1586.

Neurogenic Bladder-Induced Stone in a Pelvic Kidney of a Caudal Regression Syndrome Patient: Management of a Complex Case.

Percutaneous nephrolithotomy (PCNL) is a difficult treatment for treating kidney stones, especially when there are orthopedic or skeletal abnormalities. Here, in a 19-year-old male, we describe a two-step PCNL with a case of caudal regression syndrome (CRS) and a pelvic kidney, with an extremely deformed neurogenic bladder on intermittent catheterization. Our conclusion is that PCNL may be done safely with minimum morbidity in patients with caudal regression syndrome by utilizing adult equipment for heavy stone burdens, allowing full and rapid stone removal.