Efficient full solar spectrum-driven photocatalytic hydrogen production on low bandgap TiO2/conjugated polymer nanostructures.

The development of photocatalysts that can utilize the entire solar spectrum is crucial to achieving efficient solar energy conversion. The utility of the benchmark photocatalyst, TiO2, is limited only to the UV region due to its large bandgap. Extending the light harvesting properties across the entire spectrum is paramount to enhancing solar photocatalytic performance. In this work, we developed low bandgap TiO2/conjugated polymer nanostructures which exhibit full spectrum activity for efficient H2 production. The highly mesoporous structure of the nanostructures together with the photosensitizing properties of the conjugated polymer enabled efficient solar light activity. The mesoporous TiO2 nanostructures calcined at 550 °C exhibited a defect-free anatase crystalline phase with traces of brookite and high surface area, resulting in the best performance in hydrogen production (5.34 mmol g-1 h-1) under sunlight simulation. This value is higher not only in comparison to other TiO2-based catalysts but also to other semiconductor materials reported in the literature. Thus, this work provides an effective strategy for the construction of full spectrum active nanostructured catalysts for enhanced solar photocatalytic hydrogen production.

Degradation of Phenol via an Advanced Oxidation Process (AOP) with Immobilized Commercial Titanium Dioxide (TiO2) Photocatalysts.

Four commercial titanium dioxide (TiO2) photocatalysts, namely P25, P90, PC105, and PC500, were immobilized onto steel plates using a sol-gel binder and investigated for phenol degradation under 365 nm UV-LED irradiation. High-performance liquid chromatography (HPLC) and total organic carbon (TOC) analyses were performed to study the impact of three types of oxygen sources (air, dispersed synthetic air, and hydrogen peroxide) on the photocatalytic performance. The photocatalyst films were stable and there were significant differences in their performance. The best result was obtained with the P90/UV/H2O2 system with 100% degradation and about 70% mineralization within 3 h of irradiation. The operating conditions varied, showing that water quality is crucial for the performance. A wastewater treatment plant was developed based on the lab-scale results and water treatment costs were estimated for two cases of irradiation: UV-LED (about 600 EUR/m3) and sunlight (about 60 EUR/m3). The data show the high potential of immobilized photocatalysts for pollutant degradation under advanced oxidation process (AOP) conditions, but there is still a need for optimization to further reduce treatment costs.

Efficient preparation of nanocatalysts. Case study: green synthesis of supported Pt nanoparticles by using microemulsions and mangosteen peel extract.

Greener nanocatalyst synthesis is growing in importance, especially when using scarce noble metals such as platinum (Pt) as the active metal. In the synthesis process presented herein, we utilized extract of mangosteen peel as a green reductant and found that it produces Pt nanoparticles (NPs) with high activity. The supported Pt NPs were synthesized via thermos-destabilization of a mangosteen extract microemulsion and subsequently tested with α-methyl styrene (AMS) hydrogenation at SATP. Additionally, we optimized the green synthesis of the supported Pt nanocatalyst (NPs) in terms of their synthesis yield and catalytic activity using the approaches of full factorial design (FFD), central composite design (CCD), and response surface methodology (RSM). In comparing the results of single and multiple optimization, it was found that for the single optimization, the synthesis yield of supported Pt NPs could be increased from their average value of 78.9% to 99.75%, and their activity from 2136 to 15 600 µmol s-1 gPt -1. The results of multiple response optimization to the yield and activity are 81.71% and 8255 µmol s-1 gPt -1, respectively. The optimization approach presented in this study is suitable for similar catalyst synthesis procedures where multivariate responses are sensitive to a number of experimental factors.

Influence of Cocatalysts (Ni, Co, and Cu) and Synthesis Method on the Photocatalytic Activity of Exfoliated Graphitic Carbon Nitride for Hydrogen Production.

Exfoliated graphitic carbon nitride (ex-g-CN) was synthesized and loaded with non-noble metals (Ni, Cu, and Co). The synthesized catalysts were tested for hydrogen production using a 300-W Xe lamp equipped with a 395 nm cutoff filter. A noncommercial double-walled quartz-glass reactor irradiated from the side was used with a 1 g/L catalyst in 20 mL of a 10 vol% triethanolamine aqueous solution. For preliminary screening, the metal-loaded ex-g-CN was synthesized using the incipient wetness impregnation method. The highest hydrogen production was observed on the Ni-loaded ex-g-CN, which was selected to assess the impact of the synthesis method on hydrogen production. Ni-loaded ex-g-CN was synthesized using different synthesis methods: incipient wetness impregnation, colloidal deposition, and precipitation deposition. The catalysts were characterized by X-ray powder diffraction, X-ray photoelectron spectroscopy, nitrogen adsorption using the Brunauer-Emmett-Teller method, and transmission electron microscopy. The Ni-loaded ex-g-CN synthesized using the colloidal method performed best with a hydrogen production rate of 43.6 µmol h-1 g-1. By contrast, the catalysts synthesized using the impregnation and precipitation methods were less active, with 28.2 and 10.1 µmol h-1 g-1, respectively. The hydrogen production performance of the suspended catalyst (440 µmol m-2 g-1) showed to be superior to that of the corresponding immobilized catalyst (236 µmol m-2 g-1).

Pilot study of safety and efficacy of topical liposomal amphotericin B for cutaneous leishmaniasis caused by Leishmania major in Islamic Republic of Iran.

Background: Topical nanoliposomes containing 0.4% amphotericin B (Lip-AmB 0.4%) have shown promising safety results in preclinical and phase 1 clinical trials in healthy volunteers. Aims: To evaluate safety and efficacy of Lip-AmB 0.4% in cutaneous leishmaniasis patients. Methods: Fourteen patients with a total of 84 lesions received national standard treatment of weekly intralesional meglumine antimoniate with biweekly cryotherapy, or daily intramuscular meglumine antimoniate (20 mg/kg/day for 14 days), and topical Lip-AmB 0.4% twice daily for 28 days. Twenty-two patients with a total of 46 lesions (7 at most) were treated with topical Lip-AmB 0.4% alone twice daily for 28 days. Thirty patients with a total of 68 lesions received national standard treatment of weekly intralesional meglumine antimoniate (to blanch around the lesion) and biweekly cryotherapy. Results: Sixty-six patients with cutaneous leishmaniasis lesions completed the study. In the safety evaluation, 2 of the 36 patients evaluated reported a tolerable burning sensation and they preferred to continue treatment. Twelve (92%) of 14 patients with 84 lesions who received national standard treatment combined with Lip-AmB 0.4% completed the study with complete cure. In 1 of the patients with 4 lesions, 1 lesion showed complete cure and 3 showed partial cure. Among 22 patients with 46 lesions who received only topical LipAmB 0.4%, 19 completed the study and 18 showed complete cure (95% efficacy). In the 30 patients who received national standard treatment alone, 33 lesions in 15 patients showed complete cure (48.5%) on day 42 follow-up. Conclusion: Lip-AmB 0.4% alone or in combination with national standard treatment is safe with high-efficacy rate and warrants further investigation during phase 3 clinical trials.

Involvement of tryparedoxin peroxidase (TryP) and trypanothione reductase (TryR) in antimony unresponsive of Leishmania tropica clinical isolates of Iran.

Clinical resistance to pentavalent antimonial compounds has long been recognized as a major problem in the treatment of human leishmaniasis. Trypanothione metabolism, the main form of thiol, has shown to play a central role in antimony resistance of laboratory-generated resistant Leishmania spp. and field-isolated resistant L. donovani; but the mechanism of antimony resistance in the clinical isolates of L. tropica causing anthroponotic cutaneous leishmaniasis (ACL) is less studied. Patients were selected among confirmed positive ACL cases who referred to Pasteur Institute of Iran, Tehran, from endemic regions of north-east and south of Iran. L. tropica clinical isolates were collected from patients who were either treatment-responsive (MAS=S1 to S5) or unresponsive (MAR=R1 to R4) to Glucantime® (meglumine antimoniate=MA). Isolates were tested for sensitivity to trivalent antimony (SbIII) in promastigotes and to pentavalent antimony (SbV) in intracellular amastigotes stages. Intracellular thiol levels were assayed and trypanothione-dependent components, including trypanothione reductase (TR) and tryparedoxin peroxidase I (TryP) were analysed at protein level and enzymatic activity in isolates. The MAR isolates had an approximate two fold increase in the levels of intracellular thiols (P< 0.05) accompanied by an average 5-10 fold increase in in vitro resistance to antimony. TryP was amplified at the protein level in all MAR strains as compared to the MAS strains (range: 2.8-5.6 fold). All MAR isolates metabolized H2O2 at higher rates than MAS isolates (8.55±0.75 nmol/min/mg vs. 3.14±0.36 nmol/min/mg) (P< 0.05). In addition, levels of TryR protein were also markedly elevated in 3 out of 4 MAR isolates (range: 2.2-4.1 fold). This was accompanied by overexpressed TryR activity (mean level of 46.83±2.43 for extracts of MAR vs. 20.98±3.02 for MAS strains) (P< 0.05). Elevated levels of TryP, active enzyme in peroxide detoxification, were observed in MAR parasites resulting in an increased metabolism of H2O2. TryR activity was overexpressed on average in extracts of MAR strains, but not in all isolates. Enhanced anti-oxidant defenses through thiol metabolism may play a significant role in clinical resistance of ACL patients to Glucantime.

Insights into the light-driven hydrogen evolution reaction of mesoporous graphitic carbon nitride decorated with Pt or Ru nanoparticles.

Ru or Pt nanoparticles have been prepared following the organometallic approach and deposited onto the surface of mesoporous graphitic carbon nitride (mpg-CN). Three different Ru-based samples have also been compared to investigate the effect of 4-phenylpyridine as a stabilizing agent. The photocatalytic performance towards the hydrogen evolution reaction (HER) has been tested showing that all hybrid systems clearly outperform the photocatalytic activity of bare mpg-CN. In particular, Pt-decorated mpg-CN yields the largest H2 production upon visible-light irradiation (870 µmol h-1 g-1, TOF = 14.1 h-1, TON = 339 after 24 h) when compared with the Ru-based samples (137-155 µmol h-1 g-1, TOFs between 2.3-2.7 h-1, TONs between 54-57 after 24 h). Long-term photochemical tests (up to 65 h irradiation) show also an improved stability of the Pt-based samples over the Ru counterpart. Photophysical experiments aimed at rationalizing the photocatalytic performance of the different hybrid systems elucidate that the enhanced activity of the Pt-decorated mpg-CN over the Ru-based analogues arises from improved electron transfer kinetics from mpg-CN to the metal nanoparticles.

New composite material based on Kaolinite, cement, TiO2 for efficient removal of phenol by photocatalysis.

Photocatalysis is one of the most important process and was used to eliminate various organic pollutants as phenol in water. In this research study, a new composite containing Kaolinite, cement, and wood fibers modified by titanium oxide TiO2 was elaborated in order to be used in addition of building materials, as photocatalyst for the degradation of phenol. Different kinds and amounts of TiO2 (PC500, P90, and C-TiO2) were immobilized by a simple method inside the composite materials based. The matrix of the hybrid materials was characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), N2 adsorption-desorption (BET), and scanning electron microscope (SEM). These investigations confirmed the dispersion of titania in the new composite materials. The FTIR result has shown that clay particles were successfully treated before their insertion in the composite, by the appearance of two peaks at 2921-2851 cm-1. The XRD results reveal the identification of crystalline phase of TiO2 as anatase. The photocatalytic activity of the composite materials was investigated towards degradation of phenol in aqueous solution under UV light irradiation (369 nm). It has been found that photocatalytic efficiency was significantly enhanced when TiO2 is added. The highest photocatalytic activity has been shown by 3% P90-comp of 41.65% in comparison with 3% PC500 and 3% C-TiO2 which are 29.88% and 22.64 %, respectively. It was shown that the experimental data of kinetic reaction are well fitted by first-order model.

Morphological Description, Phylogenetic and Molecular Analysis of Dirofilaria immitis Isolated from Dogs in the Northwest of Iran.

BACKGROUND: Dirofilariasis is a globally distributed arthropod-borne parasitic disease of mainly canids and felids. We evaluated to extend the knowledge of morpho-molecular characteristics and outer ultrastructure of Dirofilaria immitis isolated from Northwest of Iran. METHODS: Overall, 67 filarial worms including 41 females and 26 males parasites were collected from the cardiovascular system of the 43 stray dogs in Meshkinshar, Ardebil Province, Northwest of Iran in 2017, and subjected to light and scanning electron microscopy (SEM) as well as carmine alum staining for morpho-molecular and identification. Molecular methods were used for confirmation of morphological findings by sequencing of Cyto-chrome c oxidase subunit I (cox1) gene. RESULTS: The partial DNA sequencing of cox1 gene of adult parasites showed considerable homology and close proximity to the previously isolated from Kerman and Meshkinshahr, Iran. The lowest genetic variation and the highest intra-species variability was found in D. immitis and Dirofilaria repens, respectively. No similarity was identified between D. immitis nucleotide sequence and Wolbachia species as its endosymbiont bacteria. CONCLUSION: The SEM technique is an excellent tool for differential recognition of the parasite surface morphology and molecular techniques could differentiate and identify Dirofilaria spp.

Comparative mitochondrial proteomics of Leishmania tropica clinical isolates resistant and sensitive to meglumine antimoniate.

Antimony is an important drug for the treatment of Leishmania parasite infections. In several countries, the emergence of drug-resistant Leishmania species has reduced the effectiveness of this drug. The mechanism of clinical drug resistance is unclear. The aim of this work was to identify mitochondrial proteome alterations associated with resistance against antimonial. A combination of cell fractionation, liquid chromatography-tandem mass spectrometry (LC-MS/MS), and Label-Free Quantification was used to characterize the mitochondrial protein composition of Leishmania tropica field isolates resistant and sensitive to meglumine antimoniate. LC-MS/MS analysis resulted in the identification of about 1200 proteins of the Leishmania tropica mitochondrial proteome. Various criteria were used to allocate about 40% proteins to mitochondrial proteome. Comparative quantitative proteomic analysis of the sensitive and the resistant strains showed proteins with differential abundance in resistance species are involved in TCA and aerobic respiration enzymes, stress proteins, lipid metabolism enzymes, and translation. These results showed that the mechanism of antimony resistance in Leishmania spp. field isolate may be associated with alteration in enzymes involved in mitochondrial pathways.

Photocatalytic Degradation of Phenol Using Photodeposited Pt Nanoparticles on Titania.

In this study, the photodeposition synthesized Pt-titania (Pt/P25) photocatalysts with various amount of Pt (0.5-5.0 wt.%) were characterized in detail by Brunauer-Emmett-Teller surface area analysis (BET), inductively coupled plasma with optical emission spectroscopy (ICP-EOS), X-ray diffraction (XRD), UV-vis diffuse reflectance spectroscopy (DRS UV-vis), attenuated total reflection (ATR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity of the investigated catalysts was studied towards the photocatalytic degradation of phenol. The best performance was obtained for the 3.0 wt.% Pt/TiO2. The concentration of photocatalyst, the initial phenol concentration and pH value of the reaction solution was studied in detail. The obtained results show that the reaction rate increases with increasing catalyst concentration and decreases with increasing phenol concentration. The highest degradation efficiency was observed for a neutral pH. In overall, the results of this study show that the Pt/TiO2 photocatalysts can efficiently improve the decomposition of phenol in the presence of UV light.

XPS studies on dispersed and immobilised carbon nitrides used for dye degradation.

Liquid phase adsorption is a common technique in waste water purification. However, this process has some downsides. The removal of environmentally harmful contaminants from organic liquids by adsorption produces secondary waste which has to be treated afterwards. The treatment can be e.g. high temperatures or a landfill. Photocatalysts such as CN6 can remove the dye under light irradiation but most times they have to be separated afterwards. Immobilisation of these photocatalysts can be one way to address this problem. The resulting photocatalyst layers were analysed in operando by near-ambient pressure XPS. This enabled us to detect the active species, i.e. oxygen radicals, at the surface, responsible for the dye degradation.

Mitochondrial proteome profiling of Leishmania tropica.

The mitochondrion of kinetoplastida has unique characteristics both in structure and function. To better understand the mitochondrial proteome of the Leishmania tropica promastigote stage, liquid chromatography coupled with mass spectrometry (LC/MS/MS) approach was used. In the wake of mitochondria isolation and purity validation, 1212 proteins were identified, among which approximately 44% of proteins belonged to the mitochondrial proteome. Several functions were enriched in mitochondrial proteome including tricarboxylic acid cycle and respiratory chain, protein folding, signalling, transport, lipid metabolism, amino acid, and nucleotide metabolism. Furthermore, the result of the present research was compared with the previous related studies. Gaining more information about vital metabolism of the cell and molecules can be used for therapeutic purposes.

Photocatalytic CO2 Reduction by Mesoporous Polymeric Carbon Nitride Photocatalysts.

In this paper, a sol-gel derived mesoporous polymeric carbon nitride has been investigated as a photocatalyst for CO2 photocatalytic reduction. Noble-metal Pt nanoparticles were deposited on carbon nitride (sg-CN) in order to investigate the performance of both Pt-sg-CN and sg-CN for photocatalytic CO2 reduction. Physicochemical properties of prepared nanocomposites were comprehensively characterized by using powder XRD, N2 physisorption, UV-Vis DRS, ICP-AES, FTIR, solid-state NMR, SEM, TEM and photoelectrochemical measurements. Compared with pure sg-CN, the resulting Pt-loaded sg-CN (Pt-sg-CN) exhibited significant improvement on the CO2 photocatalytic reduction to CH4 in the presence of water vapor at ambient condition under UV irradiation. 1.5 wt.% Pt-loaded sg-CN (Pt-sg-CN) photocatalyst formed the highest methane yield of 13.9 µmol/gcat. after 18 h of light irradiation, which was almost 2 times and 32 times improvement in comparison to pure sg-CN and commercial TiO2 Evonik P25, respectively. The substantial photocatalytic activity of Pt-sg-CN photocatalyst for the yield product of the CO2 photocatalytic reduction was attributed to the efficient interfacial transfer of photogenerated electrons from sg-CN to Pt due to the lower Fermi level of Pt in the Pt-sg-CN hybrid heterojunctions as also evidenced by photo-electrochemical measurements. This resulted in the reduction of electron-hole pairs recombination for effective spatial charge separation, consequently increasing the photocatalytic efficiency.

Photocatalytic reduction of carbon dioxide over Cu/TiO2 photocatalysts.

The photocatalytic reduction of CO2 with H2O was investigated using Cu/TiO2 photocatalysts in aqueous solution. For this purpose, Cu/TiO2 photocatalysts (with 0.2, 0.9, 2, 4, and 6 wt.% of Cu) have been synthesized via sol-gel method. The photocatalysts were extensively characterized by means of inductively coupled plasma optical emission spectrometry (ICP-OES), N2 physisorption (BET), XRD, UV-vis DRS, FT-IR, Raman spectroscopy, TEM-EDX, and photoelectrochemical measurements. The as-prepared photocatalysts contain anatase as a major crystalline phase with a crystallite size around 13 nm. By increasing the amount of Cu, specific surface area and band gap energy decreased in addition to the formation of large agglomeration of CuO. Results revealed that the photocatalytic reduction of CO2 decreased in the presence of Cu/TiO2 in comparison to pure TiO2, which might be associated to the formation of CuO phase acting as a recombination center of generated electron-hole pair. Decreasing of photoactivity can also be connected with a very low position of conduction band of photocatalysts with high Cu content, which makes H2 production necessary for CO2 reduction more difficult.

Preparation, characterization, and application of ZnO@SiO2 core-shell structured catalyst for photocatalytic degradation of phenol.

In the current study, ZnO@SiO2 core-shell structured catalyst was synthesized for photocatalytic degradation of phenol from aqueous samples. The synthesized catalyst was characterized by Fourier transform infrared spectra, X-ray diffraction, energy-dispersive X-ray spectroscopy, UV-Vis-NIR diffuse reflectance spectroscopy, transmission electron microscopy, BET surface area, zeta potential, and field emission scanning electron microscopy. The effect of catalyst loading, initial phenol concentration, pH, UV light intensity and weight ratio of ZnO/(SiO2 + ZnO) were studied towards photocatalytic degradation of phenol. Moreover, photocatalytic activities of bare ZnO and ZnO@SiO2 were compared. The results advocated that ZnO@SiO2 catalyst showed high photocatalytic performance for degradation of phenol (96 % after 120 min) at an initial pH of 5.9, catalyst loading of 0.5 g/L and initial phenol concentration of 25 mg/L. Increase in the weight ratio of ZnO/(SiO2 + ZnO) from 0.2 to 0.33 significantly enhanced the photodegradation of phenol from 84 to 94 %. It was also found that photocatalytic activity of ZnO@SiO2 was higher than bare ZnO nanoparticles. Graphical abstract ᅟ.

A Short Review on Photocatalytic Degradation of Formaldehyde.

Nowadays, it is a great challenge to eliminate toxic and harmful organic pollutants from air and water. This paper reviews the role of TiO2 as a photocatalyst, light source and photoreactor in the particular case of removal of formaldehyde using the photocatalytic reaction by titanium dioxide (TiO2) in aqueous and gaseous systems. The reaction mechanisms of the photocatalytic oxidation of gaseous formaldehyde are given. We also present a detailed review of published articles on photocatalytic degradation of formaldehyde by modified titanium dioxide doped with foreign species such as metal and non-metal components. We point out the most prospective developments of the photocatalyst compositions for the future potential commercial applications.

CCR7+ central and CCR7- effector memory CD4+ T cells in human cutaneous leishmaniasis.

PURPOSE: The profile of central (=T(CM)) and effector (=T(EM)) memory CD4(+) T cell subsets and the possible role as surrogate markers of protection is studied in the volunteers with history of cutaneous leishmaniasis (HCL). METHODS: Profile of T cell subsets based on CCR7/CD45RA expressions and phenotypic changes after soluble Leishmania antigen (SLA) stimulation were analyzed. Then, sorted CD4(+)CD45RO(-)CD45RA(+) naïve T, CD4(+)CD45RO(+)CD45RA(-)CCR7(-) T(EM,) CD4(+)CD45RO(+)CD45RA(-)CCR7(+) T(CM) subsets were cultured with SLA for proliferation, cytokine production and intracellular cytokine assays. RESULTS: In the HCL and control volunteers, the mean frequencies of CD4(+)CD45RA(+)CCR7(+) naïve T cells and CD4(+)CD45RA(-)CCR7(-) T(EM) cells were higher than the other subsets before culture. Frequency of naïve T cells and CD4(+)CD45RA(-)CCR7(+) T(CM) cells was significantly decreased (P=0.01 for naïve T and P<0.05 for T(CM) cells) and frequency of T(EM) cells was significantly increased after SLA stimulation compared to before culture (P<0.001). By CFSE labeling, CD4(+)CD45RO(+)CD45RA(-)CCR7(+) T(CM) cells showed more proliferation potential than CD4(+)CD45RO(+)CD45RA(-)CCR7(-) T(EM) cells. Stimulation of the T(EM) cells in HCL volunteers induced a significantly higher IFN-γ production (P=0.04) with higher number of intracellular IFN-γ positive cells (P=0.032) than the same cells from controls. A significantly higher number of T(CM) cells produced IL-2 in HCL volunteers compared with controls (P<0.05). Most of the intracellular IFN-γ positive T(EM) cells were proliferating CFSE-dim populations (P<0.05). CONCLUSIONS: A combination of Leishmania-reactive IFN-γ producing CD4(+)CD45RO(+)CD45RA(-)CCR7(-) T(EM) and Leishmania-reactive IL-2 producing CD4(+)CD45RO(+)CD45RA(-)CCR7(+) T(CM) are identified in individuals with history of CL which might play a role in protective recall immune response against Leishmania infection.

Photocatalytic degradation of gaseous toluene by using immobilized titania/silica on aluminum sheets.

PURPOSE: The aim of this study was to prepare a highly active immobilized titania/silica photocatalyst and to test its performance in situ toward degradation of toluene as one of the major toxic indoor contaminants. METHODS: In this work, two different titania layers immobilized on Al sheets were synthesized via low temperature sol-gel method employing presynthesized highly active titania powders (Degussa P25 and Millennium PC500, mass ratio 1:1): (a) with a silica/titania binder and a protective layer and (b) without the binder. The photocatalysts were characterized by X-ray diffraction, nitrogen sorption measurements, scanning electron microscopy (SEM), infrared spectroscopy, and UV-vis diffuse reflectance spectroscopy (DRS). The in situ photocatalytic degradation of gaseous toluene was selected as a probe reaction to test photocatalytic activity and to verify the potential application of these materials for air remediation. RESULTS: Results show that nontransparent highly photocatalytically active coatings based on the silica/titania binder and homogeneously dispersed TiO(2) powders were obtained on the Al sheets. The crystalline structure of titania was not altered upon addition of the binder, which also prevented inhomogeneous agglomeration of particles on the photocatalyst surface. The photoactivity results indicate that the adsorption properties and photocatalytic activity of immobilized photocatalysts with the silica/titania binder and an underlying protective layer were very effective and additionally, they exhibited considerably improved adhesion and uniformity. CONCLUSION: We present a new highly photocatalytically active immobilized catalyst on a convenient metallic support, which has a potential application in an air cleaning device.

Phenotyping of circulating CD8⁺ T cell subsets in human cutaneous leishmaniasis.

Recovery from CL is usually accompanied with long-lasting protection and induction of strong immune response. The phenotypes, generation and maintenance of central (=T(CM)) and effector (=T(EM)) memory T cell subsets in human leishmaniasis are not well known. Profile of T cell subsets were analyzed on peripheral CD8⁺ T cells from volunteers with history of cutaneous leishmaniasis (HCL). In HCL and control groups, mean frequencies of CCR7⁺CD45RA⁺CD8⁺ naïve and CCR7⁻CD45RA⁻CD8⁺ T(EM) cells were higher than other subsets before culture, but after stimulation with soluble Leishmania antigen, the frequency of naïve T cells was significantly decreased and the frequency of T(EM) cells was significantly increased. T(EM) phenotype composed the highest portion of proliferating Carboxy Fluorescein diacetate Succinimidyl Ester (CFSE)-dim population which was significantly higher in HCL volunteers than in control group. Stimulation of isolated CD8⁺ memory T cells, but not naïve T cells, from HCL volunteers induced a significantly higher IFN-γ production compared with that of healthy controls. Intracellular IFN-γ staining provided the same result. Memory population is shown to be responsible for Leishmania-induced IFN-γ production. Leishmania-reactive proliferating T(EM) cells were identified as the most frequent subset which may play a role in recall immune response and protection against Leishmania infection.