Validation of an Analytical Method for Simultaneous Determination of 18 Persistent Organic Pollutants in Trout Using LLE Extraction and GC-MS/MS.

Persistent organic pollutants, (POPs), are vast distributed compounds in environment which are recognized as one of the global pollution problems. These groups of materials being dangerous due to their high stability are accumulated in animal tissues and occurring in the food chain. One of the major paths through which persistent organic combinations access to human body is consuming polluted foods, particularly, fishes. Among aquatic animals, trout as one of the mostly consumed fishes in Tehran's food basket was studied. In this study, two categories of persistent organic pollutants: Organochlorine pesticides (OCPs) including HCB, Dieldrin, Methoxychlor, α-, ϒ-Chlordane, α-, ß-Endosulfan and o,p'-DDE, p,p'-DDE, o,p'-DDT, p,p'-DDT and the second group Polychlonitated biphenyls (PCBs) including seven PCB congeners which are called indicator PCBs (IUPAC nos.: 28,52,101,118,138,153 and 180) were determined in trout by GC-MS/MS in MRM monitoring mode and LLE extraction. The average recoveries of OCPs and PCBs at five concentration levels (1, 2, 5, 10 and 20 ng/g for PCBs and 5 times for OCPs) were in the range of 73-112%. The relative standard deviations of POPs in fish were in the range of 1.4-17.9% for all of the concentration levels. The limit of detections (LODs) and the limit of quantitations (LOQs) were between 0.6-8.3 and 2-25 µg/kg, respectively. The results indicated the presence of organochlorine pesticides in trout and the levels of p,p'-DDE and p,p'-DDT were within the range of < LOQ -12.83 and < LOQ -10.2 ng/g ww (wet weight), respectively. According to the results, OCPs residues were lower than maximum residue levels set by European Council Directives.

Comparison between Different Extraction Methods for Determination of Primary Aromatic Amines in Food Simulant.

The primary aromatic amines (PAAs) are food contaminants which may exist in packaged food. Polyurethane (PU) adhesives which are used in flexible packaging are the main source of PAAs. It is the unreacted diisocyanates which in fact migrate to foodstuff and then hydrolyze to PAAs. These PAAs include toluenediamines (TDAs) and methylenedianilines (MDAs), and the selected PAAs were 2,4-TDA, 2,6-TDA, 4,4'-MDA, 2,4'-MDA, and 2,2'-MDA. PAAs have genotoxic, carcinogenic, and allergenic effects. In this study, extraction methods were applied on a 3% acetic acid as food simulant which was spiked with the PAAs under study. Extraction methods were liquid-liquid extraction (LLE), dispersive liquid-liquid microextraction (DLLME), and solid-phase extraction (SPE) with C18 ec (octadecyl), HR-P (styrene/divinylbenzene), and SCX (strong cationic exchange) cartridges. Extracted samples were detected and analyzed by HPLC-UV. In comparison between methods, recovery rate of SCX cartridge showed the best adsorption, up to 91% for polar PAAs (TDAs and MDAs). The interested PAAs are polar and relatively soluble in water, so a cartridge with cationic exchange properties has the best absorption and consequently the best recoveries.

Facile preparation of multifunctional carbon nanotube/magnetite/polyaniline nanocomposite offering a strong option for efficient solid-phase microextraction coupled with GC-MS for the analysis of phenolic compounds.

The aim of this study was to synthesize a highly efficient organic-inorganic nanocomposite. In this research, the carbon nanotube/magnetite/polyaniline nanocomposite was successfully prepared through a facile route. Monodisperse magnetite nanospheres were prepared through the coprecipitation route, and polyaniline nanolayer as a modified shell with a high surface area was synthesized by an in situ growth route and characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, and energy-dispersive X-ray spectroscopy. The prepared nanocomposite was immobilized on a stainless-steel wire for the fabrication of the solid-phase microextraction fiber. The combination of headspace solid-phase microextraction using carbon nanotube/magnetite/polyaniline nanocomposite fiber with gas chromatography and mass spectrometry can achieve a low limit of detection and can be applied to determine phenolic compounds in water samples. The effects of the extraction and desorption parameters including extraction temperature and time, ionic strength, stirring rate, pH, and desorption temperature and time have been studied. Under the optimum conditions, the dynamic linear range was 0.01-500 ng/mL and the limits of detection of phenol, 4-chlorophenol, 2,6-dichlorophenol, and 2,4,6-trichlorophenol were the lowest (0.008 ng/mL) for three times. The coefficient of determination of all calibration curves was more than 0.990.

Fe(3)O(4)/polyethylene glycol nanocomposite as a solid-phase microextraction fiber coating for the determination of some volatile organic compounds in water.

A high-performance metal oxide polymer magnetite/polyethylene glycol nanocomposite was prepared and coated in situ on the surface of the optical fiber by sol-gel technology. The magnetite nanoparticles as nanofillers were synthesized by a coprecipitation method and bonded with polyethylene glycol as a polymer. The chemically bonded coating was evaluated for the headspace solid-phase microextraction of some environmentally important volatile organic compounds from aqueous samples in combination with gas chromatography and mass spectrometry. The prepared fiber was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The mass ratio of nanofiller and polymer on the coating extraction efficiency, morphology, and stability were investigated. The parameters affecting the extraction efficiency, including the extraction time and temperature, the ionic strength, desorption temperature, and time were optimized. The sol-gelized fiber showed excellent chemical stability and longer lifespan. It also exhibited high extraction efficiency compared to the two types of commercial fibers. For volatile organic compounds analysis, the new fiber showed low detection limits (0.008-0.063 ng/L) and wide linearity (0.001-450 × 104 ng/L) under the optimized conditions. The repeatability (interday and intraday) and reproducibility were 4.13-10.08 and 5.98-11.61%, and 7.35-14.79%, respectively (n = 5). For real sample analysis, three types of water samples (ground, surface, and tap water) were studied.

Extraction and Determination of Cyproheptadine in Human Urine by DLLME-HPLC Method.

Novel dispersive liquid-liquid microextraction (DLLME), coupled with high performance liquid chromatography with photodiode array detection (HPLC-DAD) has been applied for the extraction and determination of cyproheptadine (CPH), an antihistamine, in human urine samples. In this method, 0.6 mL of acetonitrile (disperser solvent) containing 30 µL of carbon tetrachloride (extraction solvent) was rapidly injected by a syringe into 5 mL urine sample. After centrifugation, the sedimented phase containing enriched analyte was dissolved in acetonitrile and an aliquot of this solution injected into the HPLC system for analysis. Development of DLLME procedure includes optimization of some important parameters such as kind and volume of extraction and disperser solvent, pH and salt addition. The proposed method has good linearity in the range of 0.02-4.5 µg mL(-1) and low detection limit (13.1 ng mL(-1)). The repeatability of the method, expressed as relative standard deviation was 4.9% (n = 3). This method has also been applied to the analysis of real urine samples with satisfactory relative recoveries in the range of 91.6-101.0%.

A novel strategy to increase performance of solid-phase microextraction fibers: electrodeposition of sol-gel films on highly porous substrate.

In the present work, the effect of substrate porosity for preparation of solid-phase microextraction (SPME) fibers was investigated. The fibers were prepared by electrodeposition of sol-gel coatings using negative potentials on porous Cu wire and compared with previous reported technique for preparation of SPME fibers using positive potentials on smooth gold wire. Porous substrate was prepared by electrodeposition of a thin layer of Cu on a Cu wire. The extraction capability of prepared fibers was evaluated through extraction of some aromatic hydrocarbons from the headspace of aqueous samples. The effect of substrate porosity and some operating parameters on extraction efficiency was optimized. The results showed that extraction efficiency of SPME fibers highly depends on porosity of the substrate. The LOD ranged from 0.005 to 0.010 ng/mL and repeatability at the 1 ng/mL was below 12%. Electrodeposited films were characterized for their surface morphology and thermal stability using SEM and thermogravimetric analysis, respectively. SEM analysis revealed formation of porous substrate and subsequently porous coating on the wire surface and thermogravimetric analysis showed high thermal stability of the prepared fiber.

A rapid, simple, liquid chromatographic-electrospray ionization, ion trap mass spectrometry method for the determination of finasteride in human plasma and its application to pharmacokinetic study.

A fast, accurate, sensitive, selective and reliable method using reversed-phase high performance liquid chromatography coupled to electrospray ionization ion trap mass spectrometry was developed and validated for the determination of finasteride in human plasma. After protein precipitation with perchloric acid, satisfactory separation was achieved on a Zorbax Eclipse(®) C8 analytical column using a mobile phase consisted of acetonitrile, 2 mM ammonium formate buffer (58:42, pH adjusted at 2.5 using formic acid); the flow rate was 0.25 mLmin(-1) and the column oven was set to 50°C. Tamoxifen citrate was used as internal standard. This method involved the use of [M +H](+) ions of finasteride and IS at m/z 373 and 372 respectively with the selected ion monitoring (SIM) mode. The calibration curve was linear over the range of 0.1-60 ng mL(-1). The limit of quantification for finasteride in plasma was 0.1 ng mL(-1). The intra-day and inter-day repeatability (precision) were 2.68-13.87% and 2.14-14.69% respectively. Intra-day and inter-day accuracy were 98-101.57% and 99.7-110%. The assay method has been successfully used to estimate the pharmacokinetics of finasteride after oral administration of a 5 mg tablet of finasteride in 12 healthy volunteers.

Pre-concentration of phenolic compounds in water samples by novel liquid-liquid microextraction and determination by gas chromatography-mass spectrometry.

Pre-concentration and determination of 8 phenolic compounds in water samples has been achieved by in situ derivatization and using a new liquid-liquid microextraction coupled GC-MS system. Microextraction efficiency factors have been investigated and optimized: 9 microL 1-undecanol microdrop exposed for 15 min floated on surface of a 10 mL water sample at 55 degrees C, stirred at 1200 rpm, low pH level and saturated salt conditions. Chromatographic problems associated with free phenols have been overcome by simultaneous in situ derivatization utilizing 40 microL of acetic anhydride and 0.5% (w/v) K(2)CO(3). Under the selected conditions, pre-concentration factor of 235-1174, limit of detection of 0.005-0.68 microg/L (S/N=3) and linearity range of 0.02-300 microg/L have been obtained. A reasonable repeatability (RSD< or =10.4%, n=5) with satisfactory linearity (0.9995> or =r(2)> or =0.9975) of results illustrated a good performance of the present method. The relative recovery of different natural water samples was higher than 84%.