RESUMO
Current technology that enables bioethanol production from agricultural biomass imposes harsh conditions for Saccharomyces cerevisiae's metabolism. In this work, the genetic architecture of industrial bioethanol yeast strain SA-1 was evaluated. SA-1 segregant FMY097 was previously described as highly aldehyde resistant and here also as thermotolerant: two important traits for the second-generation industry. A Quantitative Trait Loci (QTL) mapping of 5-hydroxymethylfurfural (HMF) -resistant segregants of hybrid FMY097/BY4742 disclosed a region in chromosome II bearing alleles with uncommon non-synonymous (NS) single nucleotide polymorphisms (SNPs) in FMY097: MIX23, PKC1, SEA4, and SRO77. Allele swap to susceptible laboratory strain BY4742 revealed that SEA4FMY097 enhances robustness towards HMF, but the industrial fitness could not be fully recovered. The genetic network arising from the causative genes in the QTL window suggests that intracellular signaling TOR (Target of Rapamycin) and CWI (Cell Wall Integrity) pathways are regulators of this phenotype in FMY097. Because the QTL mapping did not result in one major allelic contribution to the evaluated trait, a background effect in FMY097's HMF resistance is expected. Quantification of NADPH - cofactor implied in endogenous aldehyde detoxification reactions - supports the former hypothesis, given its high availability in FMY097. Regarding thermotolerance, SEA4FMY097 grants BY4742 ability to grow in temperatures as high as 38 ºC in liquid, while allele PKC1FMY097 allows growth up to 40 ºC in solid medium. Both SEA4FMY097 and PKC1FMY097 encode rare NS SNPs, not found in other > 1013S. cerevisiae. Altogether, these findings point towards crucial membrane and stress mediators for yeast robustness.
Assuntos
Proteínas de Saccharomyces cerevisiae , Termotolerância , Furaldeído/análogos & derivados , Redes Reguladoras de Genes , Saccharomyces cerevisiae/metabolismo , Proteínas de Saccharomyces cerevisiae/genética , Termotolerância/genéticaRESUMO
BACKGROUND: Sugarcane hemicellulosic material is a compelling source of usually neglected xylose that could figure as feedstock to produce chemical building blocks of high economic value, such as xylitol. In this context, Saccharomyces cerevisiae strains typically used in the Brazilian bioethanol industry are a robust chassis for genetic engineering, given their robustness towards harsh operational conditions and outstanding fermentation performance. Nevertheless, there are no reports on the use of these strains for xylitol production using sugarcane hydrolysate. RESULTS: Potential single-guided RNA off-targets were analyzed in two preeminent industrial strains (PE-2 and SA-1), providing a database of 5'-NGG 20 nucleotide sequences and guidelines for the fast and cost-effective CRISPR editing of such strains. After genomic integration of a NADPH-preferring xylose reductase (XR), FMYX (SA-1 hoΔ::xyl1) and CENPKX (CEN.PK-122 hoΔ::xyl1) were tested in varying cultivation conditions for xylitol productivity to infer influence of the genetic background. Near-theoretical yields were achieved for all strains; however, the industrial consistently outperformed the laboratory strain. Batch fermentation of raw sugarcane straw hydrolysate with remaining solid particles represented a challenge for xylose metabolization, and 3.65 ± 0.16 g/L xylitol titer was achieved by FMYX. Finally, quantification of NADPH - cofactor implied in XR activity - revealed that FMYX has 33% more available cofactors than CENPKX. CONCLUSIONS: Although widely used in several S. cerevisiae strains, this is the first report of CRISPR-Cas9 editing major yeast of the Brazilian bioethanol industry. Fermentative assays of xylose consumption revealed that NADPH availability is closely related to mutant strains' performance. We also pioneer the use of sugarcane straw as a substrate for xylitol production. Finally, we demonstrate how industrial background SA-1 is a compelling chassis for the second-generation industry, given its inhibitor tolerance and better redox environment that may favor production of reduced sugars.
RESUMO
The fermented beverage industry is always pursuing alternatives to make products that delight consumers with special or unique characteristics. The identification and improvement of new yeast strains emerge as an opportunity; however, wild strains usually have a limitation in maltose fermentation and/or off-flavors production. Here we report the production of a Blond-style ale beer using a bioethanol isolated strain (LBGA-287) with flavor complexity approved in sensorial panels. LBGA-287 also showed an increase in maltose consumption, growth and fermentation rates when compared to the commercial yeast. Using qPCR analysis, genes related to the (i) efficiency of fermentation (ii) production of aromas/off-flavors, and (iii) metabolization of carbohydrates were found as differentially expressed in the isolated strains when compared to industrial yeast. This suggests that LBGA-287 could have an important impact on beer production, improving brewing efficiency, quality and diversity of this beverage, and most importantly satisfying the final consumer.
Assuntos
Cerveja , Saccharomyces cerevisiae , Cerveja/análise , Etanol/análise , Fermentação , Bebidas Fermentadas , Saccharomyces cerevisiae/genéticaRESUMO
BACKGROUND: Saccharomyces cerevisiae is largely applied in many biotechnological processes, from traditional food and beverage industries to modern biofuel and biochemicals factories. During the fermentation process, yeast cells are usually challenged in different harsh conditions, which often impact productivity. Regarding bioethanol production, cell exposure to acidic environments is related to productivity loss on both first- and second-generation ethanol. In this scenario, indigenous strains traditionally used in fermentation stand out as a source of complex genetic architecture, mainly due to their highly robust background-including low pH tolerance. RESULTS: In this work, we pioneer the use of QTL mapping to uncover the genetic basis that confers to the industrial strain Pedra-2 (PE-2) acidic tolerance during growth at low pH. First, we developed a fluorescence-based high-throughput approach to collect a large number of haploid cells using flow cytometry. Then, we were able to apply a bulk segregant analysis to solve the genetic basis of low pH resistance in PE-2, which uncovered a region in chromosome X as the major QTL associated with the evaluated phenotype. A reciprocal hemizygosity analysis revealed the allele GAS1, encoding a ß-1,3-glucanosyltransferase, as the casual variant in this region. The GAS1 sequence alignment of distinct S. cerevisiae strains pointed out a non-synonymous mutation (A631G) prevalence in wild-type isolates, which is absent in laboratory strains. We further showcase that GAS1 allele swap between PE-2 and a low pH-susceptible strain can improve cell viability on the latter of up to 12% after a sulfuric acid wash process. CONCLUSION: This work revealed GAS1 as one of the main causative genes associated with tolerance to growth at low pH in PE-2. We also showcase how GAS1PE-2 can improve acid resistance of a susceptible strain, suggesting that these findings can be a powerful foundation for the development of more robust and acid-tolerant strains. Our results collectively show the importance of tailored industrial isolated strains in discovering the genetic architecture of relevant traits and its implications over productivity.
RESUMO
Here, we report the genome assembly of a Saccharomyces cerevisiae SA1-derived haploid (FMY097) indigenous strain isolated from a Brazilian ethanol distillery. FMY097 was recently reported to be a highly aldehyde-resistant strain capable of producing bioethanol in the presence of up to 40 mM furfural and 80 mM 5-hydroxymethylfurfural.
RESUMO
Witches' broom disease (WBD) of cacao differs from other typical hemibiotrophic plant diseases by its unusually long biotrophic phase. Plant carbon sources have been proposed to regulate WBD developmental transitions; however, nothing is known about their availability at the plant-fungus interface, the apoplastic fluid of cacao. Data are provided supporting a role for the dynamics of soluble carbon in the apoplastic fluid in prompting the end of the biotrophic phase of infection. Carbon depletion and the consequent fungal sensing of starvation were identified as key signalling factors at the apoplast. MpNEP2, a fungal effector of host necrosis, was found to be up-regulated in an autophagic-like response to carbon starvation in vitro. In addition, the in vivo artificial manipulation of carbon availability in the apoplastic fluid considerably modulated both its expression and plant necrosis rate. Strikingly, infected cacao tissues accumulated intracellular hexoses, and showed stunted photosynthesis and the up-regulation of senescence markers immediately prior to the transition to the necrotrophic phase. These opposite findings of carbon depletion and accumulation in different host cell compartments are discussed within the frame of WBD development. A model is suggested to explain phase transition as a synergic outcome of fungal-related factors released upon sensing of extracellular carbon starvation, and an early senescence of infected tissues probably triggered by intracellular sugar accumulation.
Assuntos
Agaricales/fisiologia , Cacau/metabolismo , Hexoses/metabolismo , Organelas/metabolismo , Doenças das Plantas/microbiologia , Cacau/citologia , Cacau/genética , Cacau/microbiologia , Organelas/genética , Fotossíntese , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismoRESUMO
G-quadruplexes are secondary structures present in DNA and RNA molecules, which are formed by stacking of G-quartets (i.e., interaction of four guanines (G-tracts) bounded by Hoogsteen hydrogen bonding). Human PAX9 intron 1 has a putative G-quadruplex-forming region located near exon 1, which is present in all known sequenced placental mammals. Using circular dichroism (CD) analysis and CD melting, we showed that these sequences are able to form highly stable quadruplex structures. Due to the proximity of the quadruplex structure to exon-intron boundary, we used a validated double-reporter splicing assay and qPCR to analyze its role on splicing efficiency. The human quadruplex was shown to have a key role on splicing efficiency of PAX9 intron 1, as a mutation that abolished quadruplex formation decreased dramatically the splicing efficiency of human PAX9 intron 1. The less stable, rat quadruplex had a less efficient splicing when compared to human sequences. Additionally, the treatment with 360A, a strong ligand that stabilizes quadruplex structures, further increased splicing efficiency of human PAX9 intron 1. Altogether, these results provide evidences that G-quadruplex structures are involved in splicing efficiency of PAX9 intron 1.