"Stapling" scFv for multispecific biotherapeutics of superior properties.

Single-chain fragment variable (scFv) domains play an important role in antibody-based therapeutic modalities, such as bispecifics, multispecifics and chimeric antigen receptor T cells or natural killer cells. However, scFv domains exhibit lower stability and increased risk of aggregation due to transient dissociation ("breathing") and inter-molecular reassociation of the two domains (VL and VH). We designed a novel strategy, referred to as stapling, that introduces two disulfide bonds between the scFv linker and the two variable domains to minimize scFv breathing. We named the resulting molecules stapled scFv (spFv). Stapling increased thermal stability (Tm) by an average of 10°C. In multiple scFv/spFv multispecifics, the spFv molecules display significantly improved stability, minimal aggregation and superior product quality. These spFv multispecifics retain binding affinity and functionality. Our stapling design was compatible with all antibody variable regions we evaluated and may be widely applicable to stabilize scFv molecules for designing biotherapeutics with superior biophysical properties.

Surface salt bridges contribute to the extreme thermal stability of an FN3-like domain from a thermophilic bacterium.

This study uses differential scanning calorimetry, X-ray crystallography, and molecular dynamics simulations to investigate the structural basis for the high thermal stability (melting temperature 97.5°C) of a FN3-like protein domain from thermophilic bacteria Thermoanaerobacter tengcongensis (FN3tt). FN3tt adopts a typical FN3 fold with a three-stranded beta sheet packing against a four-stranded beta sheet. We identified three solvent exposed arginine residues (R23, R25, and R72), which stabilize the protein through salt bridge interactions with glutamic acid residues on adjacent strands. Alanine mutation of the three arginine residues reduced melting temperature by up to 22°C. Crystal structures of the wild type (WT) and a thermally destabilized (∆Tm -19.7°C) triple mutant (R23L/R25T/R72I) were found to be nearly identical, suggesting that the destabilization is due to interactions of the arginine residues. Molecular dynamics simulations showed that the salt bridge interactions in the WT were stable and provided a dynamical explanation for the cooperativity observed between R23 and R25 based on calorimetry measurements. In addition, folding free energy changes computed using free energy perturbation molecular dynamics simulations showed high correlation with melting temperature changes. This work is another example of surface salt bridges contributing to the enhanced thermal stability of thermophilic proteins. The molecular dynamics simulation methods employed in this study may be broadly useful for in silico surface charge engineering of proteins.

Discovery and Functional Characterization of hPT3, a Humanized Anti-Phospho Tau Selective Monoclonal Antibody.

BACKGROUND: As a consequence of the discovery of an extracellular component responsible for the progression of tau pathology, tau immunotherapy is being extensively explored in both preclinical and clinical studies as a disease modifying strategy for the treatment of Alzheimer's disease. OBJECTIVE: Describe the characteristics of the anti-phospho (T212/T217) tau selective antibody PT3 and its humanized variant hPT3. METHODS: By performing different immunization campaigns, a large collection of antibodies has been generated and prioritized. In depth, in vitro characterization using surface plasmon resonance, phospho-epitope mapping, and X-ray crystallography experiments were performed. Further characterization involved immunohistochemical staining on mouse- and human postmortem tissue and neutralization of tau seeding by immunodepletion assays. RESULTS AND CONCLUSION: Various in vitro experiments demonstrated a high intrinsic affinity for PT3 and hPT3 for AD brain-derived paired helical filaments but also to non-aggregated phospho (T212/T217) tau. Further functional analyses in cellular and in vivo models of tau seeding demonstrated almost complete depletion of tau seeds in an AD brain homogenate. Ongoing trials will provide the clinical evaluation of the tau spreading hypothesis in Alzheimer's disease.

Antibody Structure and Function: The Basis for Engineering Therapeutics.

Antibodies and antibody-derived macromolecules have established themselves as the mainstay in protein-based therapeutic molecules (biologics). Our knowledge of the structure-function relationships of antibodies provides a platform for protein engineering that has been exploited to generate a wide range of biologics for a host of therapeutic indications. In this review, our basic understanding of the antibody structure is described along with how that knowledge has leveraged the engineering of antibody and antibody-related therapeutics having the appropriate antigen affinity, effector function, and biophysical properties. The platforms examined include the development of antibodies, antibody fragments, bispecific antibody, and antibody fusion products, whose efficacy and manufacturability can be improved via humanization, affinity modulation, and stability enhancement. We also review the design and selection of binding arms, and avidity modulation. Different strategies of preparing bispecific and multispecific molecules for an array of therapeutic applications are included.

Crystal structure of B-cell co-receptor CD19 in complex with antibody B43 reveals an unexpected fold.

CD19 is a transmembrane protein expressed on malignant B cells, but not in other lineages or other tissues, which makes it an attractive target for monoclonal antibody-mediated immunotherapy. Anti-CD19 antibody B43 was utilized in a bispecific T-cell engager (BiTE) blinatumomab that demonstrated potency for the treatment of relapsed acute lymphoblastic leukemia. To gain insight into the mechanism of action of the antibody, the crystal structure of B43 Fab was determined in complex with CD19 and in the unbound form. The structure revealed the binding epitope, explained the lack of cross-reactivity toward non-human species, and suggested the key-and-lock mechanism of antigen recognition. Most unexpectedly, the structure revealed a unique molecular topology of CD19. Rather than a tandem of c-type immunoglobulin folds predicted from the amino acid sequence, the extracellular domain of CD19 exhibits an elongated ß-sandwich formed by two immunoglobulin folds by swapping their C-terminal halves. This is the first structure of CD19, which has no sequence homologs.

Structural insights into humanization of anti-tissue factor antibody 10H10.

Murine antibody 10H10 raised against human tissue factor is unique in that it blocks the signaling pathway, and thus inhibits angiogenesis and tumor growth without interfering with coagulation. As a potential therapeutic, the antibody was humanized in a two-step procedure. Antigen-binding loops were grafted onto selected human frameworks and the resulting chimeric antibody was subjected to affinity maturation by using phage display libraries. The results of humanization were analyzed from the structural perspective through comparison of the structure of a humanized variant with the parental mouse antibody. This analysis revealed several hot spots in the framework region that appear to affect antigen binding, and therefore should be considered in human germline selection. In addition, some positions in the Vernier zone, e.g., residue 71 in the heavy chain, that are traditionally thought to be crucial appear to tolerate amino acid substitutions without any effect on binding. Several humanized variants were produced using both short and long forms of complementarity-determining region (CDR) H2 following the difference in the Kabat and Martin definitions. Comparison of such pairs indicated consistently higher thermostability of the variants with short CDR H2. Analysis of the binding data in relation to the structures singled out the ImMunoGeneTics information system® germline IGHV1-2*01 as dubious owing to two potentially destabilizing mutations as compared to the other alleles of the same germline and to other human germlines.

Structural insights into chemokine CCL17 recognition by antibody M116.

The homeostatic chemokine CCL17, also known as thymus and activation regulated chemokine (TARC), has been associated with various diseases such as asthma, idiopathic pulmonary fibrosis, atopic dermatitis and ulcerative colitis. Neutralization of CCL17 by antibody treatment ameliorates the impact of disease by blocking influx of T cells. Monoclonal antibody M116 derived from a combinatorial library shows potency in neutralizing CCL17-induced signaling. To gain insight into the structural determinants of antigen recognition, the crystal structure of M116 Fab was determined in complex with CCL17 and in the unbound form. Comparison of the structures revealed an unusual induced-fit mechanism of antigen recognition that involves cis-trans isomerization in two CDRs. The structure of the CCL17-M116 complex revealed the antibody binding epitope, which does not overlap with the putative receptor epitope, suggesting that the current model of chemokine-receptor interactions, as observed in the CXCR4-vMIP-II system, may not be universal.

A coiled conformation of amyloid-ß recognized by antibody C706.

BACKGROUND: ß-Amyloid (Aß) peptide is believed to play a pivotal role in the development of Alzheimer's disease. Passive immunization with anti-Aß monoclonal antibodies may facilitate the clearance of Aß in the brain and may thus prevent the downstream pathology. Antibodies targeting the immunodominant N-terminal epitope of Aß and capable of binding both the plaques and soluble species have been most efficacious in animal models. Structural studies of such antibodies with bound Aß peptides provided the basis for understanding the mechanisms of action and the differences in potency. To gain further insight into the structural determinants of antigen recognition and the preferential Aß conformations, we determined the crystal structure of murine antibody C706 in complex with the N-terminal Aß 1-16 peptide sequence. METHODS: The antigen-binding fragment of C706 was expressed in HEK293 cells and was crystallized in complex with the Aß peptide. The X-ray structure was determined at 1.9-Å resolution. RESULTS: The binding epitope of C706 is centered on residues Arg5 and His6, which provide the majority of interactions. Unlike most antibodies, C706 recognizes a coiled rather than extended conformation of Aß. CONCLUSIONS: Comparison with other antibodies targeting the N-terminal section of Aß suggests that the conformation of the bound peptide may be linked to the immunization protocol and may reflect the preference for the extended conformation in the context of a longer Aß peptide as opposed to the coiled conformation in the isolated short peptide.

Crystal structure of CD27 in complex with a neutralizing noncompeting antibody.

CD27 is a T-cell and B-cell co-stimulatory glycoprotein of the tumor necrosis factor (TNF) receptor superfamily that is dependent on the availability of the TNF-like ligand CD70. Therapeutic approaches to treating autoimmune diseases and cancers with antagonistic and agonistic anti-CD27 monoclonal antibodies (mAbs), respectively, have recently been developed. Mouse anti-human CD27 mAb 2177 shows potency in neutralizing CD70-induced signaling; however, it does not block the binding of soluble CD70. To provide insight into the mechanism of action of the mAb, the crystal structure of the CD27 extracellular domain in complex with the Fab fragment of mAb 2177 was determined at 1.8 Šresolution. CD27 exhibits the assembly of cysteine-rich domains characteristic of the TNF receptor superfamily. The structure reveals a unique binding site of mAb 2177 at the edge of the receptor molecule, which allows the mAb to sterically block the cell-bound form of CD70 from reaching CD27 while leaving the ligand epitope clear. This mode of action suggests a potential dual use of mAb 2177 either as an antagonist or as an agonist.

Crystal structure of tissue factor in complex with antibody 10H10 reveals the signaling epitope.

Tissue factor (TF) initiates the extrinsic pathway of blood coagulation through sequential binding and activation of coagulation factors VII (FVII) and X (FX). In addition, through activation of G-protein-coupled protease activated receptors (PARs) TF induces cell signaling that is related to cancer, angiogenesis and inflammation. Monoclonal antibodies (mAbs) proved to be a useful tool for studying the interplay between TF signaling and coagulation. MAb 10H10 is unique in that it blocks the signaling pathway and thus inhibits angiogenesis and tumor growth without interfering with coagulation. It was also presumed that mAb 10H10 recognizes the cryptic pool of TF devoid of procoagulant activity. The crystal structure of the 10H10 Fab was determined in the absence and in the presence of the TF extracellular domain (ECD). The structures show that the antibody operates by the key-and-lock mechanism causing no conformational changes in either Fab or TF. The TF:10H10 interface is extensive and includes five segments of TF in both the N-terminal and C-terminal domains of the ECD. Neither the known epitope of FVII, nor the putative epitope of FX overlaps with the 10H10 binding site. The 10H10 epitope points to the likely location of the PAR2 exosite. It is also the hypothetical site of TF interaction with integrins that may play a major role in the encryption-decryption process.

Epitope-dependent mechanisms of CD27 neutralization revealed by X-ray crystallography.

CD27 is a T and B cell co-stimulatory protein of the TNF receptor superfamily dependent on the availability of the TNF-like ligand CD70. Two anti-CD27 neutralizing monoclonal antibodies were obtained from mouse hybridoma and subsequently humanized and optimized for binding the target. The two antibodies are similar in terms of their CD27-binding affinity and ability to block NF-κB signaling, however their clearance rates in monkeys are very different. The pharmacokinetics profiles could be epitope dependent. To identify the epitopes, we determined the crystal structure of the ternary complex between CD27 and the Fab fragments of these non-competing antibodies. The structure reveals the binding modes of the antibodies suggesting that their mechanisms of action are distinctly different and provides a possible explanation of the in vivo data.

Conformational flexibility of an anti-IL-13 DARPin†.

Designed ankyrin repeat proteins (DARPin®) are artificial non-immunoglobulin binding proteins with potential applications as therapeutic molecules. DARPin 6G9 binds interleukin-13 with high affinity and blocks the signaling pathway and as such is promising for the treatment of asthma and other atopic diseases. The crystal structures of DARPin 6G9 in the unbound form and in complex with IL-13 were determined at high resolution. The DARPin competes for the same epitope as the IL-13 receptor chain 13Rα1 but does not interfere with the binding of the other receptor chain, IL-4Rα. Analysis of multiple copies of the DARPin molecule in the crystal indicates the conformational instability in the N-terminal cap that was predicted from molecular dynamics simulations. Comparison of the DARPin structures in the free state and in complex with IL-13 reveals a concerted movement of the ankyrin repeats upon binding resulted in the opening of the binding site. The induced-fit mode of binding employed by DARPin 6G9 is very unusual for DARPins since they were designed as particularly stable and rigid molecules. This finding shows that DARPins can operate by various binding mechanisms and suggests that some flexibility in the scaffold may be an advantage.

Structural diversity in a human antibody germline library.

To support antibody therapeutic development, the crystal structures of a set of 16 germline variants composed of 4 different kappa light chains paired with 4 different heavy chains have been determined. All four heavy chains of the antigen-binding fragments (Fabs) have the same complementarity-determining region (CDR) H3 that was reported in an earlier Fab structure. The structure analyses include comparisons of the overall structures, canonical structures of the CDRs and the VH:VL packing interactions. The CDR conformations for the most part are tightly clustered, especially for the ones with shorter lengths. The longer CDRs with tandem glycines or serines have more conformational diversity than the others. CDR H3, despite having the same amino acid sequence, exhibits the largest conformational diversity. About half of the structures have CDR H3 conformations similar to that of the parent; the others diverge significantly. One conclusion is that the CDR H3 conformations are influenced by both their amino acid sequence and their structural environment determined by the heavy and light chain pairing. The stem regions of 14 of the variant pairs are in the 'kinked' conformation, and only 2 are in the extended conformation. The packing of the VH and VL domains is consistent with our knowledge of antibody structure, and the tilt angles between these domains cover a range of 11 degrees. Two of 16 structures showed particularly large variations in the tilt angles when compared with the other pairings. The structures and their analyses provide a rich foundation for future antibody modeling and engineering efforts.

Epitope mapping and structural basis for the recognition of phosphorylated tau by the anti-tau antibody AT8.

Microtubule-associated protein tau becomes abnormally phosphorylated in Alzheimer's disease and other tauopathies and forms aggregates of paired helical filaments (PHF-tau). AT8 is a PHF-tau-specific monoclonal antibody that is a commonly used marker of neuropathology because of its recognition of abnormally phosphorylated tau. Previous reports described the AT8 epitope to include pS202/pT205. Our studies support and extend previous findings by also identifying pS208 as part of the binding epitope. We characterized the phosphoepitope of AT8 through both peptide binding studies and costructures with phosphopeptides. From the cocrystal structure of AT8 Fab with the diphosphorylated (pS202/pT205) peptide, it appeared that an additional phosphorylation at S208 would also be accommodated by AT8. Phosphopeptide binding studies showed that AT8 bound to the triply phosphorylated tau peptide (pS202/pT205/pS208) 30-fold stronger than to the pS202/pT205 peptide, supporting the role of pS208 in AT8 recognition. We also show that the binding kinetics of the triply phosphorylated peptide pS202/pT205/pS208 was remarkably similar to that of PHF-tau. The costructure of AT8 Fab with a pS202/pT205/pS208 peptide shows that the interaction interface involves all six CDRs and tau residues 202-209. All three phosphorylation sites are recognized by AT8, with pT205 acting as the anchor. Crystallization of the Fab/peptide complex under acidic conditions shows that CDR-L2 is prone to unfolding and precludes peptide binding, and may suggest a general instability in the antibody.

Induced conformational change in human IL-4 upon binding of a signal-neutralizing DARPin.

The crystal structure of DARPin 44C12V5 that neutralizes IL-4 signaling has been determined alone and bound to human IL-4. A significant conformational change occurs in the IL-4 upon DARPin binding. The DARPin binds to the face of IL-4 formed by the A and C α-helices. The structure of the DARPin remains virtually unchanged. The conformational changes in IL-4 include a reorientation of the C-helix Trp91 side chain and repositioning of CD-loop residue Leu96. Both side chains move by >9 Å, becoming buried in the central hydrophobic region of the IL-4:DARPin interface. This hydrophobic region is surrounded by a ring of hydrophilic interactions comprised of hydrogen bonds and salt bridges and represents a classical "hotspot." The structures also reveal how the DARPin neutralizes IL-4 signaling. Comparing the IL-4:DARPin complex structure with the structures of IL-4 bound to its receptors (Hage et al., Cell 1999; 97, 271-281; La Porte et al., Cell 2008, 132, 259-272), it is found that the DARPin binds to the same IL-4 face that interacts with the junction of the D1 and D2 domains of the IL-4Rα receptors. Signaling is blocked since IL-4 cannot bind to this receptor, which it must do first before initiating a productive receptor complex with either the IL-13α1 or the γc receptor.

Protein crystallization with microseed matrix screening: application to human germline antibody Fabs.

The crystallization of 16 human antibody Fab fragments constructed from all pairs of four different heavy chains and four different light chains was enabled by employing microseed matrix screening (MMS). In initial screening, diffraction-quality crystals were obtained for only three Fabs, while many Fabs produced hits that required optimization. Application of MMS, using the initial screens and/or refinement screens, resulted in diffraction-quality crystals of these Fabs. Five Fabs that failed to give hits in the initial screen were crystallized by cross-seeding MMS followed by MMS optimization. The crystallization protocols and strategies that resulted in structure determination of all 16 Fabs are presented. These results illustrate the power of MMS and provide a basis for developing future strategies for macromolecular crystallization.

Canonical structures of short CDR-L3 in antibodies.

Despite sequence diversity, five out of six hypervariable loops in antibodies assume a limited number of conformations called canonical structures. Their correct identification is essential for successful prediction of antibody structure. This in turn requires regular updates of the classification of canonical structures to match the expanding experimental database. Antibodies with the eight-residue CDR-L3 represent the second most common type of antibodies after those with the nine-residue CDR-L3. We have analyzed all crystal structures of Fab and Fv with the eight-residue CDR-L3 and identified three major canonical structures covering 82% of a nonredundant set. In most cases, the canonical structure is defined by the absence or presence and position of a proline residue within the CDR.

Structure and specificity of an antibody targeting a proteolytically cleaved IgG hinge.

The functional role of human antihinge (HAH) autoantibodies in normal health and disease remains elusive, but recent evidence supports their role in the host response to IgG cleavage by proteases that are prevalent in certain disorders. Characterization and potential exploitation of these HAH antibodies has been hindered by the absence of monoclonal reagents. 2095-2 is a rabbit monoclonal antibody targeting the IdeS-cleaved hinge of human IgG1. We have determined the crystal structure of the Fab of 2095-2 and its complex with a hinge analog peptide. The antibody is selective for the C-terminally cleaved hinge ending in G236 and this interaction involves an uncommon disulfide in VL CDR3. We probed the importance of the disulfide in VL CDR3 through engineering variants. We identified one variant, QAA, which does not require the disulfide for biological activity or peptide binding. The structure of this variant offers a starting point for further engineering of 2095-2 with the same specificity, but lacking the potential manufacturing liability of an additional disulfide. Proteins 2014; 82:1656-1667. © 2014 Wiley Periodicals, Inc.

Antibody modeling assessment II. Structures and models.

To assess the state-of-the-art in antibody structure modeling, a blinded study was conducted. Eleven unpublished Fab crystal structures were used as a benchmark to compare Fv models generated by seven structure prediction methodologies. In the first round, each participant submitted three non-ranked complete Fv models for each target. In the second round, CDR-H3 modeling was performed in the context of the correct environment provided by the crystal structures with CDR-H3 removed. In this report we describe the reference structures and present our assessment of the models. Some of the essential sources of errors in the predictions were traced to the selection of the structure template, both in terms of the CDR canonical structures and VL/VH packing. On top of this, the errors present in the Protein Data Bank structures were sometimes propagated in the current models, which emphasized the need for the curated structural database devoid of errors. Modeling non-canonical structures, including CDR-H3, remains the biggest challenge for antibody structure prediction.

Second antibody modeling assessment (AMA-II).

To assess the state of the art in antibody 3D modeling, 11 unpublished high-resolution x-ray Fab crystal structures from diverse species and covering a wide range of antigen-binding site conformations were used as a benchmark to compare Fv models generated by seven structure prediction methodologies. The participants included: Accerlys Inc, Chemical Computer Group (CCG), Schrodinger, Jeff Gray's lab at John Hopkins University, Macromoltek, Astellas Pharma/Osaka University and Prediction of ImmunoGlobulin Structure (PIGS). The sequences of benchmark structures were submitted to the modelers and PIGS, and a set of models were generated for each structure. We provide here an overview of the organization, participants and main results of this second antibody modeling assessment (AMA-II). Also, we compare the results with the first antibody assessment published in this journal (Almagro et al., 2011;79:3050).