Pickering emulsions stabilized by inside/out Janus nanotubes: Oil triggers an evolving solid interfacial layer.

HYPOTHESIS: In the field of Pickering emulsion, original inside/ouside Janus clays nanoparticles are investigated for their emulsification properties. Imogolite is a tubular nanomineral of the clay family having both inner and outer hydrophilic surfaces. A Janus version of this nanomineral with an inner surface fully covered by methyl groups can be obtained directly by synthesis (Imo-CH3, hybrid imogolite). The hydrophilic/hydrophobic duality of the Janus Imo-CH3 allows the nanotubes to be dispersed in an aqueous suspension and enables emulsification of non-polar compounds due to the hydrophobic inner cavity of the nanotube. EXPERIMENTS: Through the combination of Small Angle X-ray Scattering (SAXS), interfacial observations and rheology, the stabilization mechanism of imo-CH3 in oil-water emulsions has been investigated. FINDINGS: Here, we show that interfacial stabilization of an oil-in-water emulsion is rapidly obtained at a critical Imo-CH3 concentration as low as 0.6 wt%. Below this concentration threshold, no arrested coalescence is observed, and excess oil is expelled from the emulsion through a cascading coalescence mechanism. The stability of the emulsion above the concentration threshold is reinforced by an evolving interfacial solid layer resulting from the aggregation of Imo-CH3 nanotubes that is triggered by the penetration of confined oil front into the continuous phase.

Metrological Protocols for Reaching Reliable and SI-Traceable Size Results for Multi-Modal and Complexly Shaped Reference Nanoparticles.

The study described in this paper was conducted in the framework of the European nPSize project (EMPIR program) with the main objective of proposing new reference certified nanomaterials for the market in order to improve the reliability and traceability of nanoparticle size measurements. For this purpose, bimodal populations as well as complexly shaped nanoparticles (bipyramids, cubes, and rods) were synthesized. An inter-laboratory comparison was organized for comparing the size measurements of the selected nanoparticle samples performed with electron microscopy (TEM, SEM, and TSEM), scanning probe microscopy (AFM), or small-angle X-ray scattering (SAXS). The results demonstrate good consistency of the measured size by the different techniques in cases where special care was taken for sample preparation, instrument calibration, and the clear definition of the measurand. For each characterization method, the calibration process is described and a semi-quantitative table grouping the main error sources is proposed for estimating the uncertainties associated with the measurements. Regarding microscopy-based techniques applied to complexly shaped nanoparticles, data dispersion can be observed when the size measurements are affected by the orientation of the nanoparticles on the substrate. For the most complex materials, hybrid approaches combining several complementary techniques were tested, with the outcome being that the reliability of the size results was improved.

UV-Visible photo-reactivity of permanently polarized inorganic nanotubes coupled to gold nanoparticles.

Hybrid aluminosilicate nanotubes (Imo-CH3) have the ability to trap small organic molecules inside their hydrophobic internal cavity while being dispersed in water owing to their hydrophilic external surface. They also display a curvature-induced polarization of their wall, which favors reduction outside the nanotubes and oxidation inside. Here, we coupled bare plasmonic gold nanoparticles (GNPs) with Imo-CH3 and analyzed for the first time the redox reactivity of these hybrid nano-reactors upon UV illumination. We show that the coupling between GNPs and Imo-CH3 significantly enhances the nanotube photocatalytic activity, with a large part of water reduction occurring directly on the gold surface. The coupling mechanism strongly influences the initial H2 production rate, which can go from ×10 to more than ×90 as compared to bare Imo-CH3 depending on the synthesis route of the GNPs. The present results show that this hybrid photocatalytic nano-reactor benefits from a synergy of polarization and confinement effects that facilitate efficient H2 production.

Swollen cubic phases with reduced hardness solubilizing a model fragrance oil as a co-surfactant.

Swollen cubic lyotropic ternary phases with Pn3m symmetry and reduced hardness were obtained from a specific binary mixture of cubic phase-forming (phytantriol) and lamellar phase-forming (decaglycerol monooleate) compounds. The microstructures were determined by using a small-angle x-ray scattering technique. The softness and temperature-induced phase transitions were investigated by means of rheology. The incorporation of a surface-active fragrance compound (linalool) at concentrations up to 6 wt. % induced a structural transition toward a softer Im3m bulk cubic phase with longer water channels. Higher linalool concentrations allowed for the spontaneous dispersion of the bulk cubic phase into microscopic particles with a cubic structure (cubosomes).

Coexistence of Transient Liquid Droplets and Amorphous Solid Particles in Nonclassical Crystallization of Cerium Oxalate.

Crystallization from solution often occurs via "nonclassical" routes; that is, it involves transient, non-crystalline states like reactant-rich liquid droplets and amorphous particles. However, in mineral crystals, the well-defined thermodynamic character of liquid droplets and whether they convert─or not─into amorphous phases have remained unassessed. Here, by combining cryo-transmission electron microscopy and X-ray scattering down to a 250 ms reaction time, we unveil that crystallization of cerium oxalate involves a metastable chemical equilibrium between transient liquid droplets and solid amorphous particles: contrary to the usual expectation, reactant-rich droplets do not evolve into amorphous solids. Instead, at concentrations above 2.5 to 10 mmol L-1, both amorphous and reactant-rich liquid phases coexist for several tens of seconds and their molar fractions remain constant and follow the lever rule in a multicomponent phase diagram. Such a metastable chemical equilibrium between solid and liquid precursors has been so far overlooked in multistep nucleation theories and highlights the interest of rationalizing phase transformations using multicomponent phase diagrams not only when designing and recycling rare earths materials but also more generally when describing nonclassical crystallization.

Crystallization within Intermediate Amorphous Phases Determines the Polycrystallinity of Nanoparticles from Coprecipitation.

Intense research on nanocrystals synthesized in solution is motivated by their original physical properties, which are determined by their sizes and shapes on various scales. However, morphology control on the nanoscale is limited by our understanding of crystallization, which is challenged by the now well-established prevalence of noncrystalline intermediates. In particular, the impact of such intermediates on the final sizes and crystal quality remains unclear because the characterization of their evolution on the nanometer and millisecond scales with nonperturbative analyses has remained a challenge. Here we use in situ X-ray scattering to show that the nucleation and growth of YVO4:Eu nanocrystals is spatially restrained within amorphous, nanometer-scaled intermediates. The reactivity and size of these amorphous intermediates determine (i) the mono versus polycrystalline character of final crystals and (ii) the size of final crystals. This implies that designing amorphous intermediates themselves that form in <6 ms is one of the keys to controlled bottom-up syntheses of optimized nanoparticles.

Supramolecular organization and biological interaction of squalenoyl siRNA nanoparticles.

Small interfering RNAs (siRNA) are attractive and powerful tools to inhibit the expression of a targeted gene. However, their extreme hydrophilicities combined with a negative charge and short plasma half-life counteract their use as therapeutics. Previously, we chemically linked siRNA to squalene (SQ) which self-assembled as nanoparticles (NPs) with pharmacological efficiency in cancers and recently in a hereditary neuropathy. In order to understand the siRNA-SQ NP assembly and fate once intravenously injected, the present study detailed characterization of siRNA-SQ NP structure and its interaction with serum components. From SAXS and SANS analysis, we propose that the siRNA-SQ bioconjugate self-assembled as 11-nm diameter supramolecular assemblies, which are connected one to another to form spherical nanoparticles of around 130-nm diameter. The siRNA-SQ NPs were stable in biological media and interacted with serum components, notably with albumin and LDL. The high specificity of siRNA to decrease or normalize gene expression and the high colloidal stability when encapsulated into squalene nanoparticles offer promising targeted therapy with wide applications for pathologies with gene expression dysregulation.

Dimensional measurement of TiO2 (Nano) particles by SAXS and SEM in powder form.

The market for nano-additive materials has been growing exponentially since 2012, with almost 5040 consumer products containing nanoparticles in 2021. In parallel, the increasing recommendations, definitions and legislations underline the need for traceability of manufactured nanoparticles and for methods able to identify and quantify the "nano" dimensional character in manufactured product. From a multi-technic approach, this paper aims to compare the mesurands extracted from SAXS/BET (specific surface area) and SEM (diameter equivalent to a projected surface area) on different TiO2 powder issued from referenced, synthesized materials, raw materials (additives) and extracted materials from manufactured products. The influence of various parameters such as the anisotropic factor, the interaction between particles, the size distribution and the extraction steps are discussed to illustrate their impact on the diameter values issued from two different measurands. These results illustrate the difficulties in (nano)particles characterization. SEM and SAXS are complementary techniques depending on the level of dimensional characterization required.

How Do Surface Properties of Nanoparticles Influence Their Diffusion in the Extracellular Matrix? A Model Study in Matrigel Using Polymer-Grafted Nanoparticles.

Diffusion of nanomedicines inside the extracellular matrix (ECM) has been identified as a key factor to achieve homogeneous distribution and therefore therapeutic efficacy. Here, we sought to determine the impact of nanoparticles' (NPs) surface properties on their ability to diffuse in the ECM. As model nano-objects, we used a library of gold nanoparticles grafted with a versatile polymethacrylate corona, which enabled the surface properties to be modified. To accurately recreate the features of the native ECM, diffusion studies were carried out in a tumor-derived gel (Matrigel). We developed two methods to evaluate the diffusion ability of NPs inside this model gel: an easy-to-implement one based on optical monitoring and another one using small-angle X-ray scattering (SAXS) measurements. Both enabled the determination of the diffusion coefficients of NPs and comparison of the influence of their various surface properties, while the SAXS technique also allowed to monitor the NPs' structure as they diffused inside the gel. Positive charges and hydrophobicity were found to particularly hinder diffusion, and the different results suggested on the whole the presence of NPs-matrix interactions, therefore underlying the importance of the ECM model. The accuracy of the tumor-derived gels used in this study was evidenced by in vivo experiments involving intratumoral injections of NPs on mice, which showed that diffusion patterns in the peripheral tumor tissues were quite similar to the ones obtained within the chosen ECM model.

OSTE+ for in situ SAXS analysis with droplet microfluidic devices.

In recent years, microfluidic-based sample preparation techniques have emerged as a powerful tool for measurements at large scale X-ray facilities. Most often the microfluidic device was a form of hybrid system, i.e. an assembly of different materials, because a simple, versatile and inexpensive microfabrication method, on the one hand, and X-ray compatibility, on the other hand, cannot generally be achieved by the same material. The arrival of a new polymer family based on off-stoichiometric thiol-ene-epoxy (OSTE+) has recently redistributed the cards. In this context, we studied the relevance and the compatibility of OSTE+ for small-angle X-ray scattering (SAXS) studies. The material was characterized regarding its X-ray properties (transmission coefficient, attenuation coefficient, scattering pattern and polymer aging under X-ray light) and their comparison with those of the usual polymers used in microfluidics and/or for synchrotron radiation experiments. We show that OSTE+ has a better SAXS signal than polyimide, the polymer of reference in the SAXS community. Then a detailed protocol to manufacture a suitably thin full OSTE+ chip (total thickness <500 µm) is described and the potency of full OSTE+ devices for in situ SAXS studies is highlighted in two case-studies: the characterization of gold nanoparticles and the precipitation of cerium oxalate particles, both in moving droplets. Additionally, a method to analyze the scattering signals from droplet and carrier phase in a segmented flow is proposed.

Combining surface chemistry modification and in situ small-angle scattering characterization to understand and optimize the biological behavior of nanomedicines.

Nanomedicines are considered as promising therapeutics for cancer treatment. However, clinical translation is still scarce, partly because their biological behavior is not well understood. Extracting general guidelines from the great variety of nanoparticles and conditions studied is indeed difficult, and relevant techniques are lacking to obtain in situ information. Here, both issues are solved by combining versatile model nanoparticles with in situ tools based on small-angle scattering techniques (SAS). The strategy was to develop a library of nanoparticles and perform systematic study of their interactions with biological systems. Considering the promising properties of gold nanoparticles as cancer therapeutics, polymethacrylate-grafted gold nanoparticles were chosen as models. Modulation of polymer chemistry was shown to change the surface properties while keeping the same structure for all nanoparticles. This unity allowed reliable comparison to extract general principles, while the synthesis versatility enabled to fine-tune the nanoparticles surface properties, especially through copolymerization, and thus to optimize their biological behavior. Two specific aspects were particularly examined: colloidal stability and cell uptake. Positive charges and hydrophobicity were identified as key parameters influencing toxicity and internalization. In situ SAS gave valuable information about nanoparticles evolution in biologically relevant environments. Good colloidal stability was thereby shown in cell culture media, while intracellular transformation and quantity of nanoparticles were monitored, highlighting the potential of these techniques for nanomedicines studies.

Albumin-driven disassembly of lipidic nanoparticles: the specific case of the squalene-adenosine nanodrug.

In the field of nanomedicine, nanostructured nanoparticles (NPs) made of self-assembling prodrugs emerged in the recent years with promising properties. In particular, squalene-based drug nanoparticles have already shown their efficiency through in vivo experiments. However, a complete pattern of their stability and interactions in the blood stream is still lacking. In this work we assess the behavior of squalene-adenosine (SQAd) nanoparticles - whose neuroprotective effect has already been demonstrated in murine models - in the presence of fetal bovine serum (FBS) and of bovine serum albumin (BSA), the main protein of blood plasma. Extensive physicochemical characterizations were performed using Small Angle Neutron Scattering (SANS), cryogenic transmission electron microscopy (Cryo-TEM), circular dichroism (CD), steady-state fluorescence spectroscopy (SSFS) and isothermal titration calorimetry (ITC) as well as in silico by means of ensemble docking simulations with human serum albumin (HSA). Significant changes in the colloidal stability of the nanoparticles in the presence of serum albumin were observed. SANS, CD and SSFS analyses demonstrated an interaction between SQAd and BSA, with a partial disassembly of the nanoparticles in the presence of BSA and the formation of a complex between SQAd and BSA. The interaction free energy of SQAd nanoparticles with BSA derived from ITC experiments, is about -8 kcal mol-1 which is further supported in silico by ensemble docking simulations. Overall, our results show that serum albumin partially disassembles SQAd nanoparticles by extracting individual SQAd monomers from them. As a consequence, the SQAd nanoparticles would act as a circulating reservoir in the blood stream. The approach developed in this study could be extended to other soft organic nanoparticles.

Translation of nanomedicines from lab to industrial scale synthesis: The case of squalene-adenosine nanoparticles.

A large variety of nanoparticle-based delivery systems have become increasingly important for diagnostic and/or therapeutic applications. Yet, the numerous physical and chemical parameters that influence both the biological and colloidal properties of nanoparticles remain poorly understood. This complicates the ability to reliably produce and deliver well-defined nanocarriers which often leads to inconsistencies, conflicts in the published literature and, ultimately, poor translation to the clinics. A critical issue lies in the challenge of scaling-up nanomaterial synthesis and formulation from the lab to industrial scale while maintaining control over their diverse properties. Studying these phenomena early on in the development of a therapeutic agent often requires partnerships between the public and private sectors which are hard to establish. In this study, through the particular case of squalene-adenosine nanoparticles, we reported on the challenges encountered in the process of scaling-up nanomedicines synthesis. Here, squalene (the carrier) was functionalized and conjugated to adenosine (the active drug moiety) at an industrial scale in order to obtain large quantities of biocompatible and biodegradable nanoparticles. After assessing nanoparticle batch-to-batch consistency, we demonstrated that the presence of squalene analogs resulting from industrial scale-up may influence several features such as size, surface charge, protein adsorption, cytotoxicity and crystal structure. These analogs were isolated, characterized by multiple stage mass spectrometry, and their influence on nanoparticle properties further evaluated. We showed that slight variations in the chemical profile of the nanocarrier's constitutive material can have a tremendous impact on the reproducibility of nanoparticle properties. In a context where several generics of approved nanoformulated drugs are set to enter the market in the coming years, characterizing and solving these issues is an important step in the pharmaceutical development of nanomedicines.

Towards a clinical application of freeze-dried squalene-based nanomedicines.

Squalene-adenosine (SQAd) nanoparticles (NPs) were found to display promising pharmacological activity similar to many other nanomedicines, but their long-term stability was still limited, and their preparation required specific know-how and material. These drawbacks represented important restrictions for their potential use in the clinic. Freeze-drying nanoparticles is commonly presented as a solution to allow colloidal stability, but this process needs to be adapted to each nanoformulation. Hence, we aimed at developing a specific protocol for freeze-drying SQAd NPs while preserving their structural features. NPs were lyophilised, resuspended and analysed by dynamic light scattering, atomic force microscopy and small-angle scattering. Among four different cryoprotectants, trehalose was found to be the most efficient in preserving NPs physico-chemical characteristics. Interestingly, we identified residual ethanol in NP suspensions as a key parameter which could severely affect the freeze-drying outcome, leading to NPs aggregation. Long-term stability was also assessed. No significant change in size distribution or zeta potential could be detected after three-month storage at 4 °C. Finally, freeze-dried NPs innocuity was checked in vitro on cultured hepatocytes and in vivo on mice. In conclusion, optimisation of freeze-drying conditions resulted in safe lyophilised SQAd NPs that can be easily stored, shipped and simply reconstituted into an injectable form.

Partial Transformation of Imogolite by Decylphosphonic Acid Yields an Interface Active Composite Material.

The phosphonic acid moiety is commonly used as an anchoring group for the surface modification of imogolite. However, the impact of the reaction on its structure has never been clearly analyzed before. We study the reaction of imogolite and decylphosphonic acid by combining infrared spectroscopy, X-ray scattering, scanning electron microscopy, transmission electron microscopy, and solid-state nuclear magnetic resonance spectroscopy. Instead of a surface functionalization, we observe the formation of a lamellar phase interconnected with imogolite bundles. Although we find no evidence for grafted imogolite tubes, we observe the expected dispersion characteristics and stabilization of water in toluene emulsions described in the literature. Based on the surface chemistry of imogolite, we propose an explanation for the observed reactivity and link the structural features of the obtained composite material to its dispersibility in toluene and its observed properties at the toluene-water interface.

Irradiation Effects on Polymer-Grafted Gold Nanoparticles for Cancer Therapy.

In the context of cancer treatment, gold nanoparticles (AuNPs) are considered as very promising radiosensitizers. Here, well-defined polymer-grafted AuNPs were synthesized and studied under gamma irradiation to better understand the involved radiosensitizing mechanisms. First, various water-soluble and well-defined thiol-functionalized homopolymers and copolymers were obtained through atom transfer radical polymerization. They were then used as ligands in the one-step synthesis of AuNPs, which resulted in stable hybrid metal-polymer nanoparticles. Second, these nano-objects were irradiated in solution by γ rays at different doses. Structures were fully characterized through size exclusion chromatography, small-angle X-ray scattering, and small-angle neutron scattering measurements, prior to and after irradiation. We were thus able to quantify and to localize radiation impacts onto the grafted polymers, revealing the production sites of reactive species around AuNPs. Both external and near-surface scissions were observed. Interestingly, the ratio between these two effects was found to vary according to the nature of polymer ligands. Medium-range and long-distance dose enhancements could not be identified from the calculated scission yields, but several mechanisms were considered to explain high yields found for near-surface scissions. Then cytotoxicity was shown to be equivalent for both nonirradiated and irradiated polymer-grafted NPs, which suggested that released polymer fragments were nontoxic. Finally, the potential to add bioactive molecules such as anticancer drugs has been explored by grafting doxorubicin onto the polymer corona. This may lead to nano-objects combining both radiosensitization and chemotherapy effects. This work is the first one to study in details the impact of radiation on radiosensitizing nano-objects combining physical, chemical, and biological analyses.

Nanostructure Changes upon Polymerization of Aqueous and Organic Phases in Organized Mixtures.

The nanostructure of a microemulsion can be strongly affected by the liquid-to-solid transition during polymerization. Here, we examined the evolution of nanostructures of different ternary mixtures, including two microemulsions and a single lamellar phase that upon polymerization are quantitatively studied by SAXS/WAXS and DSC experiments systematically performed before and after the polymerization of both aqueous and organic phases. Samples are mixtures of the poly(2-acrylamido-2-methylpropanesulfonic acid) network as the aqueous phase and poly(hexyl methacrylate) as the organic phase stabilized by Brij35 surfactant. Upon polymerization, the surfactant is excluded from the water/oil interface and crystallizes, strongly changing the nanostructure of samples where it is the main component. In samples where the aqueous phase is the main component, only a few changes in structure are observed upon polymerization. This study demonstrates quantitatively the possibility to preserve nanostructures during polymerization, thus inducing a templating effect.

Molten fatty acid based microemulsions.

We show that ternary mixtures of water (polar phase), myristic acid (MA, apolar phase) and cetyltrimethylammonium bromide (CTAB, cationic surfactant) studied above the melting point of myristic acid allow the preparation of microemulsions without adding a salt or a co-surfactant. The combination of SANS, SAXS/WAXS, DSC, and phase diagram determination allows a complete characterization of the structures and interactions between components in the molten fatty acid based microemulsions. For the different structures characterized (microemulsion, lamellar or hexagonal phases), a similar thermal behaviour is observed for all ternary MA/CTAB/water monophasic samples and for binary MA/CTAB mixtures without water: crystalline myristic acid melts at 52 °C, and a thermal transition at 70 °C is assigned to the breaking of hydrogen bounds inside the mixed myristic acid/CTAB complex (being the surfactant film in the ternary system). Water determines the film curvature, hence the structures observed at high temperature, but does not influence the thermal behaviour of the ternary system. Myristic acid is partitioned in two "species" that behave independently: pure myristic acid and myristic acid associated with CTAB to form an equimolar complex that plays the role of the surfactant film. We therefore show that myristic acid plays the role of a solvent (oil) and a co-surfactant allowing the fine tuning of the structure of oil and water mixtures. This solvosurfactant behaviour of long chain fatty acid opens the way for new formulations with a complex structure without the addition of any extra compound.

Gold Nanoparticle Internal Structure and Symmetry Probed by Unified Small-Angle X-ray Scattering and X-ray Diffraction Coupled with Molecular Dynamics Analysis.

Shape and size are known to determine a nanoparticle's properties. Hardly ever studied in synthesis, the internal crystal structure (i.e., particle defects, crystallinity, and symmetry) is just as critical as shape and size since it directly impacts catalytic efficiency, plasmon resonance, and orients anisotropic growth of metallic nanoparticles. Hence, its control cannot be ignored any longer in today's research and applications in nanotechnology. This study implemented an unprecedented reliable measurement combining these three structural aspects. The unified small-angle X-ray scattering and diffraction measurement (SAXS/XRD) was coupled with molecular dynamics to allow simultaneous determination of nanoparticles' shape, size, and crystallinity at the atomic scale. Symmetry distribution (icosahedra-Ih, decahedra-Dh, and truncated octahedra-TOh) of 2-6 nm colloidal gold nanoparticles synthesized in organic solvents was quantified. Nanoparticle number density showed the predominance of Ih, followed by Dh, and little, if any, TOh. This result contradicts some theoretical predictions and highlights the strong effect of the synthesis environment on structure stability. We foresee that this unified SAXS/XRD analysis, yielding both statistical and quantitative counts of nanoparticles' symmetry distribution, will provide new insights into nanoparticle formation, growth, and assembly.

The role of solvent swelling in the self-assembly of squalene based nanomedicines.

Squalene based nanoparticles obtained via nanoprecipitation are promising candidates as efficient anti-cancer drugs. In order to highlight their preparation process and to facilitate further clinical translation, the present study enlightens the paramount role of the solvent in the formation of these nanomedicines. Three different squalene-based nanoparticles, i.e. squalenic acid, deoxycytidine squalene and gemcitabine squalene, have been investigated before and after organic solvent evaporation. Size and structural analysis by Small Angle Neutron Scattering revealed that droplets' size was uniquely controlled by the solvent composition (ethanol-water), which evolved during their gradual formation. The particles were preferably swollen by water and the swelling increased when less ethanol was present. Either coalescence or fragmentation was observed depending on the increase or decrease of the ethanol content, supporting an equilibrium control of the size. Moreover, a high water swelling was observed for the three local organization of the nanodroplets (hexagonal for gemcitabine squalene, cubic for deoxycytidine and not structured for squalenic acid) and could be the source of the previously reported efficiency of related anti-cancer squalene based nanomedicines.