RESUMO
A new straight forward approach to create nanoporous polymer membranes with well defined average pore diameters is presented. The method is based on fast mechanical deformation of highly entangled polymer films at high temperatures and a subsequent quench far below the glass transition temperature Tg . The process is first designed generally by simulation and then verified for the example of polystyrene films. The methodology does not need any chemical processing, supporting substrate, or self assembly process and is solely based on polymer inherent entanglement effects. Pore diameters are of the order of ten polymer reptation tube diameters. The resulting membranes are stable over months at ambient conditions and display remarkable elastic properties.
Assuntos
Nanoporos , Polímeros , Polímeros/química , Poliestirenos/química , Temperatura , Temperatura AltaRESUMO
The inclusion of sulfur in polymer materials is becoming an excellent strategy to exploit the large feedstock of elemental sulfur produced as waste by the oil industry. However, the resulting polymers have limited processability. Here we leverage the benefits of polymerization in dispersed media to produce suspensions of sulfur-rich polymer latexes that are water processable.
Assuntos
Nanopartículas , Polímeros , Polimerização , Enxofre , ÁguaRESUMO
Childhood mortality represents a major issue with 5. 3 million worldwide deaths of children under 5 years of age in 2019. Approximately half of those deaths can be attributed to easily preventable, infectious diseases. Currently approved neonatal vaccines are typically effective only after multiple doses leaving infants especially vulnerable during the first 6 months of life. Survival rates could be improved significantly by developing new and more potent vaccines that are capable of overcoming inherently tolerogenic neonatal immune systems. TLR agonists have garnered a great deal of attention in recent years due to their extensive capacities to activate innate immunity. Herein, the superior capacity of the TLR7/8 agonist, resiquimod (R848), to activate adult and neonatal primary peripheral blood dendritic cells is demonstrated. Moreover, R848 can be conjugated to polyethylene glycol and encapsulated in ovalbumin nanocapsules to efficiently co-deliver antigen and adjuvant in vitro. This study is among the first to demonstrate the capacity of encapsulated R848 to activate neonatal dendritic cells. These findings support the potential incorporation of R848 as adjuvant in neonatal vaccines, making them more effective in eliciting a robust immune response.
RESUMO
Amongst colloidal gels, those designed by the assembly of anisotropic colloidal particles tend to form fibrillar gels and are attracting interest as artificial cell growth environments since they have a structure reminiscent of biological extracellular matrices. Their properties can be tuned by controlling the size, shape, and rigidity of the nanoparticles used during their formation. Herein, the relationship between the physical and mechanical properties of the nanocolloidal building blocks and the properties of the resulting gels is investigated. Thermoresponsive particles with different aspect ratios and controlled rigidity were prepared, and the gelation and the properties of the resulting gels were studied. The results show how the aspect ratio and rigidity of polymer colloids tune the properties of the gels. An increase in the aspect ratio of the nanocolloid used led to a sol-gel transition observed at lower particle concentration, but an increase in the rigidity of the nanocolloids delayed the sol-gel transition to higher concentration. However, at a constant concentration, increases in the anisotropy produced gels with higher modulus and lower yield strain. Similarly, an increase in rigidity of the colloids increased the modulus and reduced the yield strain of the resulting gels.
Assuntos
Coloides , Nanopartículas , Anisotropia , Coloides/química , Géis/química , Nanopartículas/química , Polímeros/químicaRESUMO
Biomacromolecular therapeutic agents, particularly proteins, antigens, enzymes, and nucleic acids are emerging as powerful candidates for the treatment of various diseases and the development of the recent vaccine based on mRNA highlights the enormous potential of this class of drugs for future medical applications. However, biomacromolecular therapeutic agents present an enormous delivery challenge compared to traditional small molecules due to both a high molecular weight and a sensitive structure. Hence, the translation of their inherent pharmaceutical capacity into functional therapies is often hindered by the limited performance of conventional delivery vehicles. Polymer drug delivery systems are a modular solution able to address those issues. In this review, we discuss recent developments in the design of polymer delivery systems specifically tailored to the delivery challenges of biomacromolecular therapeutic agents. In the future, only in combination with a multifaceted and highly tunable delivery system, biomacromolecular therapeutic agents will realize their promising potential for the treatment of diseases and for the future of human health.
Assuntos
Ácidos Nucleicos , Preparações Farmacêuticas , Sistemas de Liberação de Medicamentos , Humanos , Polímeros , ProteínasRESUMO
Nanocapsules are an excellent platform for the delivery of macromolecular payloads such as proteins, nucleic acids or polyprodrugs, since they can both protect the sensitive cargo and target its delivery to the desired site of action. However, the release of macromolecules from nanocapsules remains a challenge due to their restricted diffusion through the nanoshell compared to small molecule cargo. Here, we designed degradable protein nanocapsules with varying crosslinking densities of the nanoshell to control the release of model macromolecules. While the crosslinking did not influence the degradability of the capsules by natural proteases, it significantly affected the release profiles. Furthermore, the optimized protein nanocapsules were successfully used to deliver and effectively release a bioactive macromolecular vaccine adjuvant in vitro and, thus, can be used as an efficient platform for the design of potential nanovaccines.
Assuntos
Substâncias Macromoleculares/administração & dosagem , Nanocápsulas/química , Proteínas/química , Sistemas de Liberação de Medicamentos , Liberação Controlada de Fármacos , Endopeptidase K/metabolismo , Fluorescamina , Substâncias Macromoleculares/química , Permeabilidade , Vacinas/administração & dosagemRESUMO
Triggering the release of encapsulated cargos using mechanical stress acting on a nanocarrier is a strategy with potential applications from drug delivery to self-healing coatings. The mechanically triggered release of encapsulated molecules can be controlled by tuning the mechanical properties of the nanocapsules, which are strongly linked to the nanocapsule architecture. Here, silica nanocarriers were designed to tune precisely the release initiated by mechanical stress. We synthesized silica nanocapsules (SiNCs) with a finely tunable diameter and shell thickness and performed AFM nanoindentation experiments to determine the breaking force of single SiNCs. We demonstrated that it is possible to trigger the release of encapsulated payload by the application of an external mechanical force on the SiNCs. Furthermore, we successfully controlled the breaking force and the amount of released payload by tailoring the architecture of the nanocarriers, illustrating how such mechanoresponsive SiNCs could be used as responsive nanocarriers for the delivery of molecular cargos.
RESUMO
The combination of plasmonic nanoparticles with semiconductor photocatalysts is a good strategy for synthesizing highly efficient photocatalysts. Such binary nanoparticles have demonstrated enhanced catalytic activity in comparison to either plasmonic catalysts or semiconductor catalysts. However, problematic recovery and limited long-term colloidal stability of those nanoparticles in suspension limit their wide use in catalysis. To palliate to such limitations, we embedded binary nanoparticles in polymer fibers to design photocatalytic membranes. First, we used the selective over-growth of crystalline cerium oxide on the gold nanoparticle template with distinct shapes. Gold nanospheres, gold nanorods, and gold nanotriangles were used as the template for the growth of the cerium oxide domains. Then, the resulting nanoparticles were used to catalyze model reactions in suspensions. The gold nanoparticles covered with patches of cerium oxide outperformed the fully covered and naked nanoparticles in terms of catalytic efficiency. Finally, the most efficient binary nanostructures were successfully embedded in nanofibrous membranes by colloidal electrospinning and used in water remediation experiments in a flow-through reactor.
RESUMO
Responsive nanogel systems are interesting for the drug delivery of bioactive molecules due to their high stability in aqueous media. The development of nanogels that are able to respond to biochemical cues and compatible with the encapsulation and the release of large and sensitive payloads remains challenging. Here, multistimuli-responsive nanogels were synthesized using a bio-orthogonal and reversible reaction and were designed for the selective release of encapsulated cargos in a spatiotemporally controlled manner. The nanogels were composed of a functionalized polysaccharide cross-linked with pH-responsive hydrazone linkages. The effect of the pH value of the environment on the nanogels was fully reversible, leading to a reversible control of the release of the payloads and a "stop-and-go" release profile. In addition to the pH-sensitive nature of the hydrazone network, the dextran backbone can be degraded through enzymatic cleavage. Furthermore, the cross-linkers were designed to be responsive to oxidoreductive cues. Disulfide groups, responsive to reducing environments, and thioketal groups, responsive to oxidative environments, were integrated into the nanogel network. The release of model payloads was investigated in response to changes in the pH value of the environment or to the presence of reducing or oxidizing agents.
Assuntos
Portadores de Fármacos , Concentração de Íons de Hidrogênio , Nanogéis , OxirreduçãoRESUMO
Polymers containing sulfur centers with high oxidation states in the main chain, polysulfoxide and polysulfone, display desirable properties such as thermomechanical and chemical stability. To circumvent their challenging direct synthesis, methods based on the oxidation of a parent polysulfide have been developed but are plagued by uncontrolled reactions, leading either to ill-defined mixtures of polysulfoxides and polysulfones or to polysulfones with reduced degrees of polymerization due to overoxidation of the polymer. We developed an alternative method to produce well-defined polysulfoxide and polysulfone in a waterborne colloidal emulsion using different oxidants to control the oxidation state of sulfur in the final materials. The direct oxidation of water-based polysulfide latexes avoided the use of volatile organic solvents and allowed for the control of the oxidation state of the sulfur atoms. Oxidation of parent polysulfides by tert-butyl hydroperoxide led to the production of pure polysulfoxides, even after 70 days of reaction time. Additionally, hydrogen peroxide produced both species through the course of the reaction but yielded fully converted polysulfones after 24 h. By employing mild oxidants, our approach controlled the oxidation state of the sulfur atoms in the final sulfur-containing polymer and prevented any overoxidation, thus ensuring the integrity of the polymer chains and colloidal stability of the system. We also verified the selectivity, versatility, and robustness of the method by applying it to polysulfides of different chemical compositions and structures. The universality demonstrated by this method makes it a powerful yet simple platform for the design of sulfur-containing polymers and nanoparticles.
RESUMO
Nanoreactors offer a great platform for the onsite generation of functional products. However, the production of the desired compound is often limited by either the availability of the reagents or their diffusion across the nanoreactor shell. To overcome this issue, we synthesized self-sustaining nanoreactors carrying the required reagents with them. They are composed of active enzymes crosslinked as nanocapsules and the inner core serves as a reservoir for reagents. Upon trigger, the enzymatic shell catalyzes the conversion of the encapsulated payload. This concept was demonstrated by the preparation of nanoreactors loaded with sensing molecules for the detection of glucose in biological media. More importantly, the system introduced here serves as an adaptable platform for biomedical applications, since the nanoreactors display good cellular uptake and high activity within cells. Consequently, they could act as nanofactories for the in situ generation of functional molecules.
Assuntos
Nanocápsulas , Difusão , GlucoseRESUMO
Two-photon polymerization stereolithographic three-dimensional (3D) printing is used for manufacturing a variety of structures ranging from microdevices to refractive optics. Incorporation of nanoparticles in 3D printing offers huge potential to create even more functional nanocomposite structures. However, this is difficult to achieve since the agglomeration of the nanoparticles can occur. Agglomeration not only leads to an uneven distribution of nanoparticles in the photoresin but also induces scattering of the excitation beam and altered absorption profiles due to interparticle coupling. Thus, it is crucial to ensure that the nanoparticles do not agglomerate during any stage of the process. To achieve noninteracting and well-dispersed nanoparticles on the 3D printing process, first, the stabilization of nanoparticles in the 3D printing resin is indispensable. We achieve this by functionalizing the nanoparticles with surface-bound ligands that are chemically similar to the photoresin that allows increased nanoparticle loadings without inducing agglomeration. By systematically studying the effect of different nanomaterials (Au nanoparticles, Ag nanoparticles, and CdSe/CdZnS nanoplatelets) in the resin on the 3D printing process, we observe that both, material-specific (absorption profiles) and unspecific (radical quenching at nanoparticle surfaces) pathways co-exist by which the photopolymerization procedure is altered. This can be exploited to increase the printing resolution leading to a reduction of the minimum feature size.
RESUMO
We study the effect of entanglements on the glass transition of high molecular weight polymers, by the comparison of single-chain nanoparticles (SCNPs) and equilibrated melts of high-molecular weight polystyrene of identical molecular weight. SCNPs were prepared by electrospraying technique and characterized using scanning electron microscopy and atomic force microscopy techniques. Differential scanning calorimetry, Brillouin light spectroscopy, and rheological experiments around the glass transition were compared. In parallel, entangled and disentangled polymer melts were also compared under cooling from molecular dynamics simulations based on a bead-spring polymer model. While experiments suggest a small decrease in the glass transition temperature of films of nanoparticles in comparison to entangled melts, simulations do not observe any significant difference, despite rather different chain conformations.
RESUMO
Grafting polymer chains on the surface of nanoparticles (NPs) is a strategy used to control the interaction between the NPs and their environment. The fate of the resulting particles in a given environment is strongly influenced by the solvent-polymer interaction. The solvent quality affects the behavior, conformation, and dynamics of the grafted polymer chains. However, when this polymer grafting strategy is used to functionalized polymer particles, the influence of solvent quality becomes even more complex; when the grafted polymer chains and the polymer nanoparticles are tethered together, the effect of the solvent quality on the behavior and dynamics of the system depends on the solvent interaction with both polymer components. To explore the relationship between the solvent quality and the dynamics of polymer-functionalized soft polymer NPs, we designed a system based on cross-linked polystyrene (PS) NPs grafted with a canopy of poly(methyl acrylate) (PMA). PS and PMA, two immiscible polymers, can be selectively solvated by using binary mixtures of solvents. NMR spectroscopy was used to address the effect of those selective solvents on the local mobility of the PS-PMA core-canopy NPs and revealed an interplay between the local mobility of the core and the local mobility of the canopy. A selective reduction of the solvent quality for the PMA canopy resulted in the expected reduction of the local mobility of the PMA chains, but also in the slower dynamics of the PS core. Similarly, a selective reduction of the solvent quality for the PS core resulted in a slower dynamics for both the PS core and the PMA canopy.
RESUMO
Strategies for corrosion protection are required to prolong the life span of metallic structures used by the construction, aerospace, and transport industries. Currently, there are no coatings that can provide at the same time information about the corrosion status of the coated metal and protect the metal against corrosive species and mechanical damage. Herein, triple-functional microcarriers with functions of corrosion sensing, self-healing, and corrosion inhibition are produced and embedded in coatings to prolong the lifetime of metals and enhance the anticorrosion performance of coatings. The microcarriers are prepared by creating Pickering droplets loaded with a corrosion inhibitor and a healing agent and stabilized by silica nanocapsules containing thymol blue as corrosion sensor. The microcarriers are then embedded in a water-based polymer matrix coated on metal substrates. When the coating or metal is mechanically damaged, the healing agent is released from the droplets to hinder further corrosion of the metal. When the local pH value near the metal surface is changing by the generation of hydroxide ion due to the corrosion process, a change of color is detected as well as a release of corrosion inhibitor, leading to a significant decrease of corrosion rate of the coated metal.
RESUMO
The behavior of nanogels in suspension can be dramatically affected by the grafting of a canopy of end-tethered polymer chains. The architecture of the interfacial layer, defined by the grafting density and length of the polymer chains, is a crucial parameter in defining the conformation and influencing the dynamics of the grafted chains. However, the influence of this architecture when the core substrate is itself soft and mobile is complex; the dynamics of the core influences the dynamics of the tethered chains, and, conversely, the dynamics of the tethered chains can influence the dynamics of the core. Here, poly(styrene) (PS) particles were functionalized with poly(methyl acrylate) (PMA) chains and swollen in a common solvent. NMR relaxation reveals that the confinement influences the mobility of the grafted chain more prominently for densely grafted short chains. The correlation time associated with the relaxation of the PMA increased by more than 20% when the grafting density increased for short chains, but for less than 10% for long chains. This phenomenon is likely due to the steric hindrance created by the close proximity to the rigid core and of the neighboring chains. More interestingly, a thick layer of a densely grafted PMA canopy efficiently increases the local mobility of the PS cores, with a reduction of the correlation time of more than 30%. These results suggest an interplay between the dynamics of the core and the dynamics of the canopy.
RESUMO
Bio-orthogonal reactions have become an essential tool to prepare biomaterials; for example, in the synthesis of nanocarriers, bio-orthogonal chemistry allows circumventing common obstacles related to the encapsulation of delicate payloads or the occurrence of uncontrolled side reactions, which significantly limit the range of potential payloads to encapsulate. Here, we report a new approach to prepare pH-responsive nanocarriers using dynamic bio-orthogonal chemistry. The reaction between a poly(hydrazide) crosslinker and functionalized polysaccharides was used to form a pH-responsive hydrazone network. The network formation occurred at the interface of aqueous nanodroplets in miniemulsion and led to the production of nanocapsules that were able to encapsulate payloads of different molecular weights. The resulting nanocapsules displayed low cytotoxicity and were able to release the encapsulated payload, in a controlled manner, under mildly acidic conditions.
Assuntos
Nanocápsulas , Materiais Biocompatíveis , Concentração de Íons de Hidrogênio , PolissacarídeosRESUMO
The design of surface-modified functional nanoparticles (NPs) is used to control the properties of the NPs and the NP/environment interactions. The efficient control of the final behavior of the NPs demands a comprehensive understanding of the resulting system. This is particularly challenging for systems with an architecture of the type polymer core-polymer canopy. In such systems, one of the key parameters influencing the behavior of the NPs is the local dynamics of the polymer canopy. However, because the grafting points of the canopy are experiencing their own local dynamics, predicting the final behavior of such systems is difficult. To get a deeper understanding of NPs made of a soft and swollen polymer core and a swollen polymer canopy, we prepared a library of hairy NPs made of a polystyrene (PS) core and a canopy of grafted poly(methyl acrylate) (PMA) chains. The softness of the PS core and the thickness of the PMA canopy were controlled, and the behavior and dynamics of the soft and hairy PS-PMA NPs in suspension were measured by 1H NMR relaxation and dynamic light scattering. It was observed that the rigid PS core slowed down the subsegmental dynamics of the PMA chains, while thick PMA canopies accelerated the relaxation of the PS core. The dynamics of the NPs in suspension was the result of the interplay between the PS core and the PMA canopy.
RESUMO
Superparamagnetism exists only in nanocrystals, and to endow micro/macro-materials with superparamagnetism, superparamagnetic nanoparticles have to be assembled into complex materials. Most techniques currently used to produce such assemblies are inefficient in terms of time and material. Herein, we used evaporation-guided assembly to produce superparamagnetic supraparticles by drying ferrofluid droplets on a superamphiphobic substrate in the presence of an external magnetic field. By tuning the concentration of ferrofluid droplets and controlling the magnetic field, barrel-like, cone-like, and two-tower-like supraparticles were obtained. These assembled supraparticles preserved the superparamagnetism of the original nanoparticles. Moreover, other colloids can easily be integrated into the ferrofluid suspension to produce, by co-assembly, anisotropic binary supraparticles with additional functions. Additionally, the magnetic and anisotropic nature of the resulting supraparticles was harnessed to prepare magnetically actuable microswimmers.
RESUMO
A reversible polymer photoacid with a thermal on/off switch at physiological temperature able to trigger a large pH modulation of its environment is prepared. Light is used to control the acidity of the solution. Additionally, the temperature could be used to modulate the photoacid efficiency, practically turning on and off the ability of the polymer to produce protons. The behavior of this thermoresponsive photoacid copolymer is the result of the combined action of the temperature-responsive N-isopropylacrylamide and of a reversible photoacid monomer based on a spiropyran derivative. The acidification of the aqueous medium is activated by irradiation at λ = 460 nm. The reverse reaction is achieved by removing the light stimuli or by exposing the solution to UV-light. Increasing the temperature above the lower critical solution temperature of the copolymer deactivates the photoacid and irradiation at λ = 460 nm does not lead to the generation of protons or to any detectable change in the pH value of the solution. Hence, the addition of N-isopropylacrylamide as a comonomer acts as a thermal on/off switch for the photoacid and the coupling of temperature-and light-responsiveness in the polyphotoacids yields a "thermophotoacid".