RESUMO
In nanoscale structures with rotational symmetry, such as quantum rings, the orbital motion of electrons combined with a spin-orbit interaction can produce a very strong and anisotropic Zeeman effect. Since symmetry is sensitive to electric fields, ring-like geometries provide an opportunity to manipulate magnetic properties over an exceptionally wide range. In this work, we show that it is possible to form rotationally symmetric confinement potentials inside a semiconductor quantum dot, resulting in electron orbitals with large orbital angular momentum and strong spin-orbit interactions. We find complete suppression of Zeeman spin splitting for magnetic fields applied in the quantum dot plane, similar to the expected behavior of an ideal quantum ring. Spin splitting reappears as orbital interactions are activated with symmetry-breaking electric fields. For two valence electrons, representing a common basis for spin-qubits, we find that modulating the rotational symmetry may offer new prospects for realizing tunable protection and interaction of spin-orbital states.
RESUMO
We explore the energetics of microwaves interacting with a double quantum dot photodiode and show wave-particle aspects in photon-assisted tunneling. The experiments show that the single-photon energy sets the relevant absorption energy in a weak-drive limit, which contrasts the strong-drive limit where the wave amplitude determines the relevant-energy scale and opens up microwave-induced bias triangles. The threshold condition between these two regimes is set by the fine-structure constant of the system. The energetics are determined here with the detuning conditions of the double dot system and stopping-potential measurements that constitute a microwave version of the photoelectric effect.
RESUMO
We have performed tunnel transport spectroscopy on a quantum dot (QD) molecule proximitized by a superconducting contact. In such a system, the scattering between QD spins and Bogoliubov quasiparticles leads to the formation of Yu-Shiba-Rusinov (YSR) states within the superconducting gap. In this work, we investigate interactions appearing when one- and two-electron spin states in a double-QD energetically align with the superconducting gap edge. We find that the inter-dot spin-triplet state interacts considerably stronger with the superconductor than the corresponding singlet, pointing to stronger screening. By forming a ring molecule with a significant orbital contribution to the effectiveg-factor, we observe interactions of all four spin-orbital one-electron states with the superconductor under a weak magnetic field.
RESUMO
In this Letter, we manipulate the phase shift of a Josephson junction using a parallel double quantum dot (QD). By employing a superconducting quantum interference device, we determine how orbital hybridization and detuning affect the current-phase relation in the Coulomb blockade regime. For weak hybridization between the QDs, we find π junction characteristics if at least one QD has an unpaired electron. Notably the critical current is higher when both QDs have an odd electron occupation. By increasing the inter-QD hybridization the critical current is reduced, until eventually a π-0 transition occurs. A similar transition appears when detuning the QD levels at finite hybridization. Based on a zero-bandwidth model, we argue that both cases of phase-shift transitions can be understood considering an increased weight of states with a double occupancy in the ground state and with the Cooper pair transport dominated by local Andreev reflection.
RESUMO
We study experimentally work fluctuations in a Szilard engine that extracts work from information encoded as the occupancy of an electron level in a semiconductor quantum dot. We show that as the average work extracted per bit of information increases toward the Landauer limit k_{B}Tln2, the work fluctuations decrease in accordance with the work fluctuation-dissipation relation. We compare the results to a protocol without measurement and feedback and show that when no information is used, the work output and fluctuations vanish simultaneously, contrasting the information-to-energy conversion case where increasing amount of work is produced with decreasing fluctuations. Our study highlights the importance of fluctuations in the design of information-to-work conversion processes.
RESUMO
We experimentally investigate the properties of one-dimensional quantum rings that form near the surface of nanowire quantum dots. In agreement with theoretical predictions, we observe the appearance of forbidden gaps in the evolution of states in a magnetic field as the symmetry of a quantum ring is reduced. For a twofold symmetry, our experiments confirm that orbital states are grouped pairwise. Here, a π-phase shift can be introduced in the Aharonov-Bohm relation by controlling the relative orbital parity using an electric field. Studying rings with higher symmetry, we note exceptionally large orbital contributions to the effective g-factor (up to 300), which are many times higher than those previously reported. These findings show that the properties of a phase-coherent system can be significantly altered by the nanostructure symmetry and its interplay with wave function parity.
RESUMO
Converting incoming photons to electrical current is the key operation principle of optical photodetectors and it enables a host of emerging quantum information technologies. The leading approach for continuous and efficient detection in the optical domain builds on semiconductor photodiodes. However, there is a paucity of efficient and continuous photon detectors in the microwave regime, because photon energies are four to five orders of magnitude lower therein and conventional photodiodes do not have that sensitivity. Here we tackle this gap and demonstrate how microwave photons can be efficiently and continuously converted to electrical current in a high-quality, semiconducting nanowire double quantum dot resonantly coupled to a cavity. In particular, in our photodiode device, an absorbed photon gives rise to a single electron tunneling through the double dot, with a conversion efficiency reaching 6%.
RESUMO
Studies of thermally induced transport in nanostructures provide access to an exciting regime where fluctuations are relevant, enabling the investigation of fundamental thermodynamic concepts and the realization of thermal energy harvesters. We study a serial double quantum dot formed in an InAs/InP nanowire coupled to two electron reservoirs. By means of a specially designed local metallic joule-heater, the temperature of the phonon bath in the vicinity of the double quantum dot can be enhanced. This results in phonon-assisted transport, enabling the conversion of local heat into electrical power in a nanosized heat engine. Simultaneously, the electron temperatures of the reservoirs are affected, resulting in conventional thermoelectric transport. By detailed modeling and experimentally tuning the interdot coupling, we disentangle both effects. Furthermore, we show that phonon-assisted transport is sensitive to excited states. Our findings demonstrate the versatility of our design to study fluctuations and fundamental nanothermodynamics.
RESUMO
Subgap states in semiconducting-superconducting nanowire hybrid devices are controversially discussed as potential topologically nontrivial quantum states. One source of ambiguity is the lack of an energetically and spatially well defined tunnel spectrometer. Here, we use quantum dots directly integrated into the nanowire during the growth process to perform tunnel spectroscopy of discrete subgap states in a long nanowire segment. In addition to subgap states with a standard magnetic field dependence, we find topologically trivial subgap states that are independent of the external magnetic field, i.e., that are pinned to a constant energy as a function of field. We explain this effect qualitatively and quantitatively by taking into account the strong spin-orbit interaction in the nanowire, which can lead to a decoupling of Andreev bound states from the field due to a spatial spin texture of the confined eigenstates. This result constitutes an important step forward in the research on superconducting subgap states in nanowires, such as Majorana bound states.
RESUMO
Nanowires bring new possibilities to the field of hot-carrier photovoltaics by providing flexibility in combining materials for band engineering and using nanophotonic effects to control light absorption. Previously, an open-circuit voltage beyond the Shockley-Queisser limit was demonstrated in hot-carrier devices based on InAs-InP-InAs nanowire heterostructures. However, in these first experiments, the location of light absorption, and therefore the precise mechanism of hot-carrier extraction, was uncontrolled. In this Letter, we combine plasmonic nanoantennas with InAs-InP-InAs nanowire devices to enhance light absorption within a subwavelength region near an InP energy barrier that serves as an energy filter. From photon-energy- and irradiance-dependent photocurrent and photovoltage measurements, we find that photocurrent generation is dominated by internal photoemission of nonthermalized hot electrons when the photoexcited electron energy is above the barrier and by photothermionic emission when the energy is below the barrier. We estimate that an internal quantum efficiency up to 0.5-1.2% is achieved. Insights from this study provide guidelines to improve internal quantum efficiencies based on nanowire heterostructures.
RESUMO
We experimentally verify hitherto untested theoretical predictions about the thermoelectric properties of Kondo correlated quantum dots (QDs). The specific conditions required for this study are obtained by using QDs epitaxially grown in nanowires, combined with a recently developed method for controlling and measuring temperature differences at the nanoscale. This makes it possible to obtain data of very high quality both below and above the Kondo temperature, and allows a quantitative comparison with theoretical predictions. Specifically, we verify that Kondo correlations can induce a polarity change of the thermoelectric current, which can be reversed either by increasing the temperature or by applying a magnetic field.
RESUMO
We study spin transport in the one- and two-electron regimes of parallel-coupled double quantum dots (DQDs). The DQDs are formed in InAs nanowires by a combination of crystal-phase engineering and electrostatic gating, with an interdot tunnel coupling (t) tunable by one order of magnitude. Large single-particle energy separations (up to 10 meV) and |g^{*}| factors (â¼10) enable detailed studies of the B-field-induced transition from a singlet-to-triplet ground state as a function of t. In particular, we investigate how the magnitude of the spin-orbit-induced singlet-triplet anticrossing depends on t. For cases of strong coupling, we find values of 230 µeV for the anticrossing using excited-state spectroscopy. Experimental results are reproduced by calculations based on rate equations and a DQD model including a single orbital in each dot.
RESUMO
Cyclical heat engines are a paradigm of classical thermodynamics, but are impractical for miniaturization because they rely on moving parts. A more recent concept is particle-exchange (PE) heat engines, which uses energy filtering to control a thermally driven particle flow between two heat reservoirs1,2. As they do not require moving parts and can be realized in solid-state materials, they are suitable for low-power applications and miniaturization. It was predicted that PE engines could reach the same thermodynamically ideal efficiency limits as those accessible to cyclical engines3-6, but this prediction has not been verified experimentally. Here, we demonstrate a PE heat engine based on a quantum dot (QD) embedded into a semiconductor nanowire. We directly measure the engine's steady-state electric power output and combine it with the calculated electronic heat flow to determine the electronic efficiency η. We find that at the maximum power conditions, η is in agreement with the Curzon-Ahlborn efficiency6-9 and that the overall maximum η is in excess of 70% of the Carnot efficiency while maintaining a finite power output. Our results demonstrate that thermoelectric power conversion can, in principle, be achieved close to the thermodynamic limits, with direct relevance for future hot-carrier photovoltaics10, on-chip coolers or energy harvesters for quantum technologies.
RESUMO
In the past decade, there has been significant interest in the potentially advantageous thermoelectric properties of one-dimensional (1D) nanowires, but it has been challenging to find high thermoelectric power factors based on 1D effects in practice. Here we point out that there is an upper limit to the thermoelectric power factor of nonballistic 1D nanowires, as a consequence of the recently established quantum bound of thermoelectric power output. We experimentally test this limit in quasiballistic InAs nanowires by extracting the maximum power factor of the first 1D subband through I-V characterization, finding that the measured maximum power factors conform to the theoretical limit. The established limit allows the prediction of the achievable power factor of a specific nanowire material system with 1D electronic transport based on the nanowire dimension and mean free path. The power factor of state-of-the-art semiconductor nanowires with small cross section and high crystal quality can be expected to be highly competitive (on the order of mW/m K^{2}) at low temperatures. However, they have no clear advantage over bulk materials at, or above, room temperature.
RESUMO
We use crystal-phase tuning during epitaxial growth of InAs nanowires to create quantum dots with very strong confinement. A set of gate electrodes are used to reproducibly split the quantum dots into even smaller pairs for which we can control the populations down to the last electron. The double quantum dots, which are parallel-coupled to source and drain, show clear and stable odd-even level pairing due to spin degeneracy and the strong confinement. The combination of hard-wall barriers to source and drain, shallow interdot tunnel barriers, and very high single-particle excitation energies allow an order of magnitude tuning of the strength for the first intramolecular bond. We show examples for nanowires with different facet orientations, and suggest possible mechanisms behind the reproducible double-dot formation.
RESUMO
Compared to traditional pn-junction photovoltaics, hot carrier solar cells offer potentially higher efficiency by extracting work from the kinetic energy of photogenerated 'hot carriers' before they cool to the lattice temperature. Hot carrier solar cells have been demonstrated in high-bandgap ferroelectric insulators and GaAs/AlGaAs heterostructures, but so far not in low-bandgap materials, where the potential efficiency gain is highest. Recently, a high open-circuit voltage was demonstrated in an illuminated wurtzite InAs nanowire with a low bandgap of 0.39 eV, and was interpreted in terms of a photothermoelectric effect. Here, we point out that this device is a hot carrier solar cell and discuss its performance in those terms. In the demonstrated devices, InP heterostructures are used as energy filters in order to thermoelectrically harvest the energy of hot electrons photogenerated in InAs absorber segments. The obtained photovoltage depends on the heterostructure design of the energy filter and is therefore tunable. By using a high-resistance, thermionic barrier, an open-circuit voltage is obtained that is in excess of the Shockley-Queisser limit. These results provide generalizable insight into how to realize high voltage hot carrier solar cells in low-bandgap materials, and therefore are a step towards the demonstration of higher efficiency hot carrier solar cells.
RESUMO
The photothermoelectric (PTE) effect uses nonuniform absorption of light to produce a voltage via the Seebeck effect and is of interest for optical sensing and solar-to-electric energy conversion. However, the utility of PTE devices reported to date has been limited by the need to use a tightly focused laser spot to achieve the required, nonuniform illumination and by their dependence upon the Seebeck coefficients of the constituent materials, which exhibit limited tunability and, generally, low values. Here, we use InAs/InP heterostructure nanowires to overcome these limitations: first, we use naturally occurring absorption "hot spots" at wave mode maxima within the nanowire to achieve sharp boundaries between heated and unheated subwavelength regions of high and low absorption, allowing us to use global illumination; second, we employ carrier energy-filtering heterostructures to achieve a high Seebeck coefficient that is tunable by heterostructure design. Using these methods, we demonstrate PTE voltages of hundreds of millivolts at room temperature from a globally illuminated nanowire device. Furthermore, we find PTE currents and voltages that change polarity as a function of the wavelength of illumination due to spatial shifting of subwavelength absorption hot spots. These results indicate the feasibility of designing new types of PTE-based photodetectors, photothermoelectrics, and hot-carrier solar cells using nanowires.
RESUMO
Although zinc-blende (ZB) and wurtzite (WZ) structures differ only in the atomic stacking sequence, mixing of crystal phases can strongly affect the electronic properties, a problem particularly common to bottom up-grown nanostructures. A lack of understanding of the nature of electronic transport at crystal phase junctions thus severely limits our ability to develop functional nanowire devices. In this work we investigated electron transport in InAs nanowires with designed mixing of crystal structures, ZB/WZ/ZB, by temperature-dependent electrical measurements. The WZ inclusion gives rise to an energy barrier in the conduction band. Interpreting the experimental result in terms of thermionic emission and using a drift-diffusion model, we extracted values for the WZ/ZB band offset, 135 ± 10 meV, and interface sheet polarization charge density on the order of 10-3 C/m2. The extracted polarization charge density is 1-2 orders of magnitude smaller than previous experimental results, but in good agreement with first principle calculation of spontaneous polarization in WZ InAs. When the WZ length is reduced below 20 nm, an effective barrier lowering is observed, indicating the increasing importance of tunneling transport. Finally, we found that band-bending at ZB/WZ junctions can lead to bound electron states within an enclosed WZ segment of sufficient length, evidenced by our observation of Coulomb blockade at low temperature. These findings provide critical input for modeling and designing the electronic properties of novel functional devices, such as nanowire transistors, where crystal polytypes are commonly found.
RESUMO
In semiconductor heterostructures with a type II band alignment, such as GaSb-InAs, conduction can be tuned from electron- to hole-dominated using an electrostatic gate. However, traditional conductance measurements give no direct information on the carrier type, and thus limit the ability to distinguish transport effects originating from the two materials. Here, we employ thermovoltage measurements to GaSb/InAs core-shell nanowires, and reliably identify the dominant carrier type at room temperature as well as in the quantum transport regime at 4.2 K, even in cases where the conductance measurement does not allow for such a distinction. In addition, we show that theoretical modeling using the conductance data as input can reproduce the measured thermovoltage under the assumption that electron and hole states shift differently in energy with the applied gate voltage.
RESUMO
Using a scanning tunneling and atomic force microscope combined with in-vacuum atomic hydrogen cleaning we demonstrate stable scanning tunneling spectroscopy (STS) with nanoscale resolution on electrically active nanowire devices in the common lateral configuration. We use this method to map out the surface density of states on both the GaSb and InAs segments of GaSb-InAs Esaki diodes as well as the transition region between the two segments. Generally the surface shows small bandgaps centered around the Fermi level, which is attributed to a thin multielement surface layer, except in the diode transition region where we observe a sudden broadening of the bandgap. By applying a bias to the nanowire we find that the STS spectra shift according to the local nanoscale potential drop inside the wire. Importantly, this shows that we have a nanoscale probe with which we can infer both surface electronic structure and the local potential inside the nanowire and we can connect this information directly to the performance of the imaged device.