Collagen-Heparin-FGF2-VEGF Scaffolds Induce a Regenerative Gene Expression Profile in a Fetal Sheep Wound Model.

BACKGROUND: The developmental abnormality spina bifida is hallmarked by missing tissues (e.g. skin) and exposure of the spinal cord to the amniotic fluid, which can negatively impact neurological development. Surgical closure of the skin in utero limits neurological damage, but in large defects this results in scarring and contractures. Stimulating skin regeneration in utero would greatly benefit treatment outcome. Previously, we demonstrated that a porous type I collagen (COL) scaffold, functionalized with heparin (HEP), fibroblast growth factor 2 (FGF2) and vascular endothelial growth factor (VEGF) (COL-HEP/GF) improved pre- and postnatal skin regeneration in a fetal sheep full thickness wound model. In this study we uncover the early events associated with enhanced skin regeneration. METHODS: We investigated the gene expression profiles of healing fetal skin wounds two weeks after implantation of the COL(-HEP/GF) scaffolds. Using laser dissection and microarrays, differentially expressed genes (DEG) were identified in the epidermis and dermis between untreated wounds, COL-treated wounds and wounds treated with COL-HEP/GF. Biological processes were identified using gene enrichment analysis and DEG were clustered using protein-protein-interaction networks. RESULTS: COL-HEP/GF influences various interesting biological processes involved in wound healing. Although the changes were modest, using protein-protein-interaction networks we identified a variety of clustered genes that indicate COL-HEP/GF induces a tight but subtle control over cell signaling and extracellular matrix organization. CONCLUSION: These data offer a novel perspective on the key processes involved in (fetal) wound healing, where a targeted and early interference during wound healing can result in long-term enhanced effects on skin regeneration.

Comparison of Osteogenic Capacity and Osteoinduction of Adipose Tissue-Derived Cell Populations.

Stromal vascular fraction (SVF) is the primary isolate obtained after enzymatic digestion of adipose tissue that contains various cell types. Its successful application for cell-based construct preparation in an intra-operative setting for clinical bone augmentation and regeneration has been previously reported. However, the performance of SVF-based constructs compared with traditional ex vivo expanded adipose tissue-derived mesenchymal stromal cells (ATMSCs) remains unclear and direct comparative analyses are scarce. Consequently, we here aimed at comparing the in vitro osteogenic differentiation capacity of donor-matched SVF versus ATMSCs as well as their osteoinductive capacity. Human adipose tissue from nine different donors was used to isolate SVF, which was further purified via plastic-adherence to obtain donor-matched ATMSCs. Both cell populations were immunophenotypically characterized for mesenchymal stromal cell, endothelial, and hematopoietic markers after isolation and immunocytochemical staining was used to identify different cell types during prolonged cell culture. Based on normalization using plastic-adherence fraction determination, SVF and ATMSCs were seeded and cultured in osteogenic differentiation medium for 28 days. Further, SVF and ATMSCs were seeded onto devitalized bovine bone granules and subcutaneously implanted into nude mice. After 42 days of implantation, granules were retrieved, histologically processed, and stained with hematoxylin and eosin (HE) to assess ectopic bone formation. The ATMSCs were shown to be a homogenous cell population during cell culture, whereas SVF cultures consisted of multiple cell types. All donor-matched comparisons showed either accelerated or stronger mineralization for SVF cultures in vitro. However, neither SVF nor ATMSCs loaded on devitalized bone granules induced ectopic bone formation on subcutaneous implantation, as opposed to control granules loaded with bone morphogenetic protein-2 (BMP-2), which triggered ectopic bone formation with 100% incidence. Despite the observed lack of osteoinduction, our findings provide important in vitro evidence on the osteogenic superiority of intra-operatively available SVF as compared with donor-matched ATMSCs. Consequently, further studies should focus on optimizing the efficacy of these cell populations for implementation in orthotopic bone fracture or defect treatment.

A Temperature-Based Easy-Separable (TempEasy) 3D Hydrogel Coculture System.

Interactions between different cell types are crucial for their behavior in tissues, but are rarely considered in 3D in vitro cell culture experiments. One reason is that such coculture experiments are sometimes difficult to perform in 3D or require specialized equipment or know-how. Here, a new 3D cell coculture system is introduced, TempEasy, which is readily applied in any cell culture lab. The matrix material is based on polyisocyanide hydrogels, which closely resemble the mechanical characteristics of the natural extracellular matrix. Gels with different gelation temperatures, seeded with different cells, are placed on top of each other to form an indirect coculture. Cooling reverses gelation, allowing cell harvesting from each layer separately, which benefits downstream analysis. To demonstrate the potential of TempEasy , human adipose stem cells (hADSCs) with vaginal epithelial fibroblasts are cocultured. The analysis of a 7-day coculture shows that hADSCs promote cell-cell interaction of fibroblasts, while fibroblasts promote proliferation and differentiation of hADSCs. TempEasy provides a straightforward operational platform for indirect cocultures of cells of different lineages in well-defined microenvironments.

Isolation of multipotent progenitor cells from pleura and pericardium for tracheal tissue engineering purposes.

Tissue engineering (TE) of long tracheal segments is conceptually appealing for patients with inoperable tracheal pathology. In tracheal TE, stem cells isolated from bone marrow or adipose tissue have been employed, but the ideal cell source has yet to be determined. When considering the origin of stem cells, cells isolated from a source embryonically related to the trachea may be more similar. In this study, we investigated the feasibility of isolating progenitor cells from pleura and pericard as an alternative cells source for tracheal tissue engineering. Porcine progenitor cells were isolated from pleura, pericard, trachea and adipose tissue and expanded in culture. Isolated cells were characterized by PCR, RNA sequencing, differentiation assays and cell survival assays and were compared to trachea and adipose-derived progenitor cells. Progenitor-like cells were successfully isolated and expanded from pericard and pleura as indicated by gene expression and functional analyses. Gene expression analysis and RNA sequencing showed a stem cell signature indicating multipotency, albeit that subtle differences between different cell sources were visible. Functional analysis revealed that these cells were able to differentiate towards chondrogenic, osteogenic and adipogenic lineages. Isolation of progenitor cells from pericard and pleura with stem cell features is feasible. Although functional differences with adipose-derived stem cells were limited, based on their gene expression, pericard- and pleura-derived stem cells may represent a superior autologous cell source for cell seeding in tracheal tissue engineering.

Sustained Postnatal Skin Regeneration Upon Prenatal Application of Functionalized Collagen Scaffolds.

Primary closure of fetal skin in spina bifida protects the spinal cord and improves clinical outcome, but is also associated with postnatal growth malformations and spinal cord tethering. In this study, we evaluated the postnatal effects of prenatally closed full-thickness skin defects in sheep applying collagen scaffolds with and without heparin/vascular endothelial growth factor/fibroblast growth factor 2, focusing on skin regeneration and growth. At 6 months, collagen scaffold functionalized with heparin, VEGF, and FGF2 (COL-HEP/GF) resulted in a 6.9-fold increase of the surface area of the regenerated skin opposed to 1.7 × for collagen only. Epidermal thickness increased 5.7-fold at 1 month, in line with high gene expression of S100 proteins, and decreased to 2.1 at 6 months. Increased adipose tissue and reduced scaffold degradation and number of myofibroblasts were observed for COL-HEP/GF. Gene ontology terms related to extracellular matrix (ECM) organization were enriched for both scaffold treatments. In COL-HEP/GF, ECM gene expression resembled native skin. Expression of hair follicle-related genes in COL-HEP/GF was comparable to native skin, and de novo hair follicle generation was indicated. In conclusion, in utero closure of skin defects using functionalized collagen scaffolds resulted in long-term skin regeneration and growth. Functionalized collagen scaffolds that grow with the child may be useful for prenatal treatment of closure defects like spina bifida. Impact statement Prenatal closure of fetal skin in case of spina bifida prevents damage to the spinal cord. Closure of the defect is challenging and may result in postnatal growth malformations. In this study, the postnatal effects of a prenatally applied collagen scaffold functionalized with heparin and vascular endothelial growth factor (VEGF)/fibroblast growth factor (FGF) were investigated. An increase of the surface area of regenerated skin ("growing with the child") and generation of hair follicles was observed. Gene expression levels resembled those of native skin with respect to the extracellular matrix and hair follicles. Overall, in utero closure of skin defects using heparin/VEGF/FGF functionalized collagen scaffolds results in long-term skin regeneration.

The Impact of γ-Irradiation and EtO Degassing on Tissue Remodeling of Collagen-based Hybrid Tubular Templates.

Clinical implementation of novel products for tissue engineering and regenerative medicine requires a validated sterilization method. In this study, we investigated the effect of γ-irradiation and EtO degassing on material characteristics in vitro and the effect on template remodeling of hybrid tubular constructs in a large animal model. Hybrid tubular templates were prepared from type I collagen and Vicryl polymers and sterilized by 25 kGray of γ-irradiation or EtO degassing. The in vitro characteristics were extensively studied, including tensile strength analysis and degradation studies. For in vivo evaluation, constructs were subcutaneously implanted in goats for 1 month to form vascularized neo-tissue. Macroscopic and microscopic appearances of the γ- and EtO-sterilized constructs slightly differed due to additional processing required for the COL-Vicryl-EtO constructs. Regardless of the sterilization method, incubation in urine resulted in fast degradation of the Vicryl polymer and decreased strength (<7 days). Incubation in SBF was less invasive, and strength was maintained for at least 14 days. The difference between the two sterilization methods was otherwise limited. In contrast, subcutaneous implantation showed that the effect of sterilization was considerable. A well-vascularized tube was formed in both cases, but the γ-irradiated construct showed an organized architecture of vasculature and was mechanically more comparable to the native ureter. Moreover, the γ-irradiated construct showed advanced tissue remodeling as shown by enhanced ECM production. This study shows that the effect of sterilization on tissue remodeling cannot be predicted by in vitro analyses alone. Thus, validated sterilization methods should be incorporated early in the development of tissue engineered products, and this requires both in vitro and in vivo analyses.

Labeling of Collagen Type I Templates with a Naturally Derived Contrast Agent for Noninvasive MR Imaging in Soft Tissue Engineering.

In vivo monitoring of tissue-engineered constructs is important to assess their integrity, remodeling, and degradation. However, this is challenging when the contrast with neighboring tissues is low, necessitating labeling with contrast agents (CAs), but current CAs have limitations (i.e., toxicity, negative contrast, label instability, and/or inappropriate size). Therefore, a naturally derived hemin-L-lysine (HL) complex is used as a potential CA to label collagen-based templates for magnetic resonance imaging (MRI). Labeling does not change the basic characteristics of the collagen templates. When hybrid templates composed of collagen type I reinforced with degradable polymers are subcutaneously implanted in mice, longitudinal visualization by MRI is possible with good contrast and in correlation with template remodeling. In contrast, unlabeled collagen templates are hardly detectable and the fate of these templates cannot be monitored by MRI. Interestingly, tissue remodeling and vascularization are enhanced within HL-labeled templates. Thus, HL labeling is presented as a promising universal imaging marker to label tissue-engineered implants for MRI, which additionally seems to accelerate tissue regeneration.

Bladder Regeneration Using Multiple Acellular Scaffolds with Growth Factors in a Bladder.

INTRODUCTION: Tissue engineering may become an alternative to current bladder augmentation techniques. Large scaffolds are needed for clinically significant augmentation, but can result in fibrosis and graft shrinkage. The purpose of this study was to investigate the use of multiple scaffolds instead of one large scaffold, to enhance bladder tissue regeneration and bladder capacity. Second, acellular collagen, collagen-heparin, and collagen-heparin scaffolds with growth factors (GFs) were used and the biological activity of the different scaffolds was compared in a large animal model. MATERIALS AND METHODS: Scaffolds were made of bovine type I collagen with or without heparin (Ø = 3.2 cm). Collagen-heparin scaffolds were loaded with GFs, vascular endothelial growth factor (VEGF), fibroblast growth factor 2 (FGF2), and heparin-binding epidermal growth factor (HB-EGF). Three identical scaffolds prepared from collagen (COL-group), collagen with heparin (COLHEP-group), or collagen-heparin with growth factors (COLHEPGF-group) were implanted in one porcine bladder. The outcome was compared with sham-operated animals (Sham-group), in which no scaffold was used. Urodynamic evaluation was performed before surgery and 3 months after bladder reconstruction, together with histological evaluation. RESULTS: Survival rate was 92%, 12 animals completed the study, 3 of every group, 1 animal developed peritonitis due to urine leakage and was sacrificed. The regenerated area was largest in the COLHEP-group, and least in the COL-group (p = 0.002). Histological evaluation revealed a normal urothelial layer and good angiogenesis in all groups, and comparable ingrowth of smooth muscle cells. Urodynamics showed no statistically significant differences in bladder capacity and compliance between groups. Bladder capacity and compliance was very high in this animal model, which made it impossible to study the increase due to augmentation. CONCLUSIONS: Implantation of multiple collagen-heparin scaffolds in one bladder is feasible in a porcine model, resulting in tissue almost indistinguishable from native tissue involving all cell layers of the bladder. Collagen scaffolds with heparin incorporated resulted in a larger area of regenerated tissue. To reach clinically significant augmentation, multiple larger collagen-heparin scaffolds, with or without GFs, need to be tested to study the largest possible diameter of scaffold and number of used scaffolds still resulting in well-vascularized tissue.

Tubular collagen scaffolds with radial elasticity for hollow organ regeneration.

Tubular collagen scaffolds have been used for the repair of damaged hollow organs in regenerative medicine, but they generally lack the ability to reversibly expand in radial direction, a physiological characteristic seen in many native tubular organs. In this study, tubular collagen scaffolds were prepared that display a shape recovery effect and therefore exhibit radial elasticity. Scaffolds were constructed by compression of fibrillar collagen around a star-shaped mandrel, mimicking folds in a lumen, a typical characteristic of empty tubular hollow organs, such as ureter or urethra. Shape recovery effect was introduced by in situ fixation using a star-shaped mandrel, 3D-printed clamps and cytocompatible carbodiimide crosslinking. Prepared scaffolds expanded upon increase of luminal pressure and closed to the star-shaped conformation after removal of pressure. In this study, we applied this method to construct a scaffold mimicking the dynamics of human urethra. Radial expansion and closure of the scaffold could be iteratively performed for at least 1000 cycles, burst pressure being 132±22mmHg. Scaffolds were seeded with human epithelial cells and cultured in a bioreactor under dynamic conditions mimicking urination (pulse flow of 21s every 2h). Cells adhered and formed a closed luminal layer that resisted flow conditions. In conclusion, a new type of a tubular collagen scaffold has been constructed with radial elastic-like characteristics based on the shape of the scaffold, and enabling the scaffold to reversibly expand upon increase in luminal pressure. These scaffolds may be useful for regenerative medicine of tubular organs. STATEMENT OF SIGNIFICANCE: In this paper, a new type I collagen-based tubular scaffold is presented that possesses intrinsic radial elasticity. This characteristic is key to the functioning of a number of tubular organs including blood vessels and organs of the gastrointestinal and urogenital tract. The scaffold was given a star-shaped lumen by physical compression and chemical crosslinking, mimicking the folding pattern observed in many tubular organs. In rest, the lumen is closed but it opens upon increase of luminal pressure, e.g. when fluids pass. Human epithelial cells seeded on the luminal side adhered well and were compatible with voiding dynamics in a bioreactor. Collagen scaffolds with radial elasticity may be useful in the regeneration of dynamic tubular organs.

The effect of a cyclic uniaxial strain on urinary bladder cells.

PURPOSE: Pre-conditioning of a cell seeded construct may improve the functional outcome of a tissue engineered construct for augmentation cystoplasty. The precise effects of mechanical stimulation on urinary bladder cells in vitro are not clear. In this study we investigate the effect of a cyclic uniaxial strain culture on urinary bladder cells which were seeded on a type I collagen scaffold. METHODS: Isolated porcine smooth muscle cells or urothelial cells were seeded on a type I collagen scaffolds and cultured under static and dynamic conditions. A uniform cyclic uniaxial strain was applied to the seeded scaffold using a Bose Electroforce Bio-Dynamic bioreactor. Cell proliferation rate and phenotype were investigated, including SEM analysis, RT-PCR and immunohistochemistry for α-Smooth muscle actin, calponin-1, desmin and RCK103 expression to determine the effects of mechanical stimulation on both cell types. RESULTS: Dynamic stimulation of smooth muscle cell seeded constructs resulted in cell alignment and enhanced proliferation rate. Additionally, expression of α-Smooth muscle actin and calponin-1 was increased suggesting differentiation of smooth muscle cells to a more mature phenotype. CONCLUSIONS: Mechanical stimuli did not enhance the proliferation and differentiation of urothelial cells. Mechanical stimulation, i.e., preconditioning may improve the functional in vivo outcome of smooth muscle cell seeded constructs for flexible organs such as the bladder.

Design of an elasticized collagen scaffold: A method to induce elasticity in a rigid protein.

UNLABELLED: Type I collagen is widely applied as a biomaterial for tissue regeneration. In the extracellular matrix, collagen provides strength but not elasticity under large deformations, a characteristic crucial for dynamic organs and generally imparted by elastic fibers. In this study, a methodology is described to induce elastic-like characteristics in a scaffold consisting of solely type I collagen. Tubular scaffolds are prepared from collagen fibrils by a casting, molding, freezing and lyophilization process. The lyophilized constructs are compressed, corrugated and subsequently chemically crosslinked with carbodiimide in the corrugated position. This procedure induces elastic-like properties in the scaffolds that could be repeatedly stretched five times their original length for at least 1000 cycles. The induced elasticity is entropy driven and can be explained by the introduction of hydrophobic patches that are disrupted upon stretching thus increasing the hydrophobic-hydrophilic interface. The scaffolds are cytocompatible as demonstrated by fibroblast cell culture. In conclusion, a new straightforward technique is described to endow unique elastic characteristics to scaffolds prepared from type I collagen alone. Scaffolds may be useful for engineering of dynamic tissues such as blood vessels, ligaments, and lung. STATEMENT OF SIGNIFICANCE: In this research report, a methodology is presented to introduce elasticity to biomaterials consisting of only type I collagen fibrils. The method comprises physical compression and corrugation in combination with chemical crosslinking. By introducing elasticity to collagen biomaterials, their application in regenerative medicine may be expanded to dynamic organs such as blood vessels, ligaments and lung. The combination of strength and elasticity in one single natural biomaterial may also "simplify" the design of new scaffolds.

Scaffolds for whole organ tissue engineering: Construction and in vitro evaluation of a seamless, spherical and hollow collagen bladder construct with appendices.

UNLABELLED: The field of regenerative medicine has developed promising techniques to improve current neobladder strategies used for radical cystectomies or congenital anomalies. Scaffolds made from molecularly defined biomaterials are instrumental in the regeneration of tissues, but are generally confined to small flat patches and do not comprise the whole organ. We have developed a simple, one-step casting method to produce a seamless large hollow collagen-based scaffold, mimicking the shape of the whole bladder, and with integrated anastomotic sites for ureters and urethra. The hollow bladder scaffold is highly standardized, with uniform wall thickness and a unidirectional pore structure to facilitate cell infiltration in vivo. Human and porcine bladder urothelial and smooth muscle cells were able to attach to the scaffold and maintained their phenotype in vitro. The closed luminal side and the porous outside of the scaffold facilitated the formation of an urothelial lining and infiltration of smooth muscle cells, respectively. The cells aligned according to the provided scaffold template. The technology used is highly adjustable (shape, size, materials) and may be used as a starting point for research to an off-the-shelf medical device suitable for neobladders. STATEMENT OF SIGNIFICANCE: In this study, we describe the development of a simple, one-step casting method to produce a seamless large hollow collagen-based scaffold mimicking the shape of the whole bladder with integrated anastomotic sites for ureters and urethra. The hollow bladder scaffold is highly standardized with uniform wall thickness and a unidirectional pore structure to facilitate cell infiltration in vivo. The closed luminal surface and the porous exterior of the scaffold facilitated the formation of a urothelial lining and infiltration of smooth muscle cells, respectively. The applied technology is highly adjustable (shape, size, materials) and can be the starting point for research to an off-the-shelf medical device suitable for neobladders.

Tubular Constructs as Artificial Urinary Conduits.

PURPOSE: A readily available artificial urinary conduit might be substituted for autologous bowel in standard urinary diversions and minimize bowel associated complications. However, the use of large constructs remains challenging as host cellular ingrowth and/or vascularization is limited. We investigated large, reinforced, collagen based tubular constructs in a urinary diversion porcine model and compared subcutaneously pre-implanted constructs to cell seeded and basic constructs. MATERIALS AND METHODS: Reinforced tubular constructs were prepared from type I collagen and biodegradable Vicryl® meshes through standard freezing, lyophilization and cross-linking techniques. Artificial urinary conduits were created in 17 female Landrace pigs, including 7 with a basic untreated construct, 5 with a construct seeded with autologous urothelial and smooth muscle cells, and 5 with a free graft formed by subcutaneous pre-implantation of a basic construct. All pigs were evaluated after 1 month. RESULTS: The survival rate was 94%. At evaluation 1 basic and 1 cell seeded conduit were occluded. Urinary flow was maintained in all conduits created with pre-implanted constructs. Pre-implantation of the basic construct resulted in a vascularized tissue tube, which could be used as a free graft to create an artificial conduit. The outcome was favorable compared to that of the other conduits. Urinary drainage was better, hydroureteronephrosis was limited and tissue regeneration was improved. CONCLUSIONS: Subcutaneous pre-implantation of a basic reinforced tubular construct resulted in a vascularized autologous tube, which may potentially replace bowel in standard urinary diversions. To our knowledge we introduce a straightforward 2-step procedure to create artificial urinary conduits in a large animal model.

Bladder Regeneration Using a Smart Acellular Collagen Scaffold with Growth Factors VEGF, FGF2 and HB-EGF.

Tissue engineering may become an alternative to current bladder augmentation techniques. Large scaffolds are needed for clinically significant augmentation, but can result in fibrosis and graft shrinkage. The purpose of this study was to investigate whether smart acellular collagen-heparin scaffolds with growth factors (GFs) VEGF, FGF2, and HB-EGF enhance bladder tissue regeneration and bladder capacity in a large animal model of diseased bladder. Scaffolds of bovine type I collagen with heparin and VEGF, FGF2, and HB-EGF measuring 3.2 cm in diameter were prepared. In 23 fetal sheep, a bladder exstrophy was surgically created at 79 days of gestation. One week after birth (at full term), the bladder was reconstructed by primary closure (PC group) or using a collagen-heparin scaffold with GFs (COLGF group) and compared to a historical group reconstructed with a collagen scaffold without GFs (COL group). Functional (video urodynamics) and histological evaluation was performed 1 and 6 months after bladder repair. The overall survival rate was 57%. Cystograms were normal in all animals, except for low-grade reflux in all groups. Urodynamics showed no statistically significant differences in bladder capacity and compliance between groups. Histological evaluation at 1 month revealed increased urothelium formation, improved angiogenesis, and enhanced ingrowth of smooth muscle cells (SMCs) in the COLGF group compared to the COL group. At 6 months, improved SMC ingrowth was found in the COLGF group compared to the COL group; both scaffold groups showed normal urothelial lining and standard extracellular matrix development. Bladder regeneration using a collagen-heparin scaffold with VEGF, FGF2, and HB-EGF improved bladder tissue regeneration in a large animal model of diseased bladder. Larger GF-loaded constructs need to be tested to reach clinically significant augmentation.

Tissue engineering of diseased bladder using a collagen scaffold in a bladder exstrophy model.

OBJECTIVE: To compare the regenerative capacity of diseased bladder in a large animal model of bladder exstrophy with regeneration in healthy bladder using a highly porous collagen scaffold. MATERIALS AND METHODS: Highly porous bovine type I collagen scaffolds with a diameter of 32 mm were prepared. In 12 fetal sheep a bladder exstrophy was surgically created at 79 days' gestation. Lambs were born at full term (140 days' gestation). After 1 week the bladder lesion was reconstructed and augmented with a collagen scaffold (group 1). In nine normal newborn lambs the bladder was augmented with a collagen scaffold 1 week after birth (group 2). Functional (video-urodynamics) and histological evaluation was performed at 1 and 6 months after surgery. RESULTS: The survival rate was 58% in group 1 and 100% in group 2. Cystograms were normal in all lambs, besides low-grade reflux in both groups. Urodynamics showed comparable capacity between both groups and a trend to lower compliance in group 1. Histological evaluation at 1 month revealed a non-confluent urothelial layer, an immature submucosa, and initial ingrowth of smooth muscle cells. At 6 months both groups showed normal urothelial lining, standard extracellular matrix development, and smooth muscle cell ingrowth. CONCLUSIONS: Bladder tissue regeneration with a collagen scaffold in a diseased bladder model and in healthy bladder resulted in comparable functional and histological outcome, with a good quality of regenerated tissue involving all tissue layers. Improvements may still be needed for larger augmentations or more severely diseased bladders.

Is there a need for smooth muscle cell transplantation in urethral reconstruction?

BACKGROUND: Hypospadias and urethral strictures are conditions requiring additional tissue for reconstruction. Due to a limited source of tissue, autologous skin and oral mucosa are frequently used. However, long-term follow-up studies demonstrated significant complications and diminished quality of life. Recently, a variety of tubular biodegradable biomaterials have been used. Cell seeding seems to be important to improve the host acceptance and neovascularization. OBJECTIVE: To compare in vivo performance of smooth muscle cell (SMC)-seeded and unseeded tubular collagen-based scaffolds in a rabbit urethral reconstruction model. MATERIALS AND METHODS: Sixteen New Zealand rabbits underwent an open-bladder biopsy for SMC harvesting. The SMCs were cultured for 3 weeks and labeled with ethynyldeoxyuridine (EdU). A 1-cm-length tubular collagen-based 0.5 wt% scaffold was seeded and cultured with SMCs and implantation in a rabbit model. Eight rabbits received SMC-seeded scaffolds for a 1-cm-length circumferential urethral repair, situated 1.5 cm from the meatus. After 1 and 3 months, four rabbits underwent a urethrography and were sacrificed. The penises underwent hematoxylin and eosin, immunohistochemistry, and EdU fluorescence staining. In the control group eight rabbits received acellular scaffolds. RESULTS: The SMC-seeded group presented one stricture at 1 month and one fistula at 3 months. Three strictures were present in the unseeded group at 1 month and one at 3 months. In the seeded group, more SMC expression and neovascularization was observed, and less mononuclear and giant cells could be found. All scaffolds showed luminal urothelial cell revetment. The detection of EdU-labeled SMCs revealed SMC transplantation survival. CONCLUSION: SMC-seeded tubular collagen scaffolds improved urethral regeneration in this rabbit model. Such constructs may be valuable for repair of severe urethral diseases.

Seamless vascularized large-diameter tubular collagen scaffolds reinforced with polymer knittings for esophageal regenerative medicine.

A clinical demand exists for alternatives to repair the esophagus in case of congenital defects, cancer, or trauma. A seamless biocompatible off-the-shelf large-diameter tubular scaffold, which is accessible for vascularization, could set the stage for regenerative medicine of the esophagus. The use of seamless scaffolds eliminates the error-prone tubularization step, which is necessary when emanating from flat scaffolds. In this study, we developed and characterized three different types of seamless tubular scaffolds, and evaluated in vivo tissue compatibility, including vascularization by omental wrapping. Scaffolds (luminal Ø âˆ¼ 1.5 cm) were constructed using freezing, lyophilizing, and cross-linking techniques and included (1) single-layered porous collagen scaffold, (2) dual-layered (porous+dense) collagen scaffold, and (3) hybrid scaffold (collagen+incorporated polycaprolacton knitting). The latter had an ultimate tensile strength comparable to a porcine esophagus. To induce rapid vascularization, scaffolds were implanted in the omentum of sheep using a wrapping technique. After 6 weeks of biocompatibility, vascularization, calcification, and hypoxia were evaluated using immunohistochemistry. Scaffolds were biocompatible, and cellular influx and ingrowth of blood vessels were observed throughout the whole scaffold. No calcification was observed, and slight hypoxic conditions were detected only in the direct vicinity of the polymer knitting. It is concluded that seamless large-diameter tubular collagen-based scaffolds can be constructed and vascularized in vivo. Such scaffolds provide novel tools for esophageal reconstruction.

Tissue engineered tubular construct for urinary diversion in a preclinical porcine model.

PURPOSE: The ileal conduit has been considered the gold standard urinary diversion for patients with bladder cancer and pediatric patients. Complications are mainly related to the use of gastrointestinal tissue. Tissue engineering may be the technical platform on which to develop alternatives to gastrointestinal tissue. We developed a collagen-polymer conduit and evaluated its applicability for urinary diversion in pigs. MATERIALS AND METHODS: Tubular constructs 12 cm long and 15 mm in diameter were prepared from bovine type I collagen and Vypro® II synthetic polymer mesh. Characterized tubes were sterilized, seeded with and without primary porcine bladder urothelial cells, and implanted as an incontinent urostomy using the right ureter in 10 female Landrace pigs. At 1 month the newly formed tissue structure was functionally and microscopically evaluated by loopogram and immunohistochemistry, respectively. RESULTS: The survival rate was 80% with 1 related and 1 unrelated death. By 1 month the collagen was resorbed and a retroperitoneal tunnel had formed that withstood 40 cm H(2)O water pressure. In 5 cases the tunnel functioned as a urostomy. Histological analysis revealed a moderate immune response, neovascularization and urothelial cells in the construct lumen. The polymer mesh provoked fibroblast deposition and tissue contraction. No major differences were observed between cellular and acellular constructs. CONCLUSIONS: After implanting the tubular constructs a retroperitoneal tunnel was formed that functioned as a urinary conduit in most cases. Improved large tubular scaffolds may generate alternatives to gastrointestinal tissue for urinary diversion.

Improving the cell distribution in collagen-coated poly-caprolactone knittings.

Adequate cellular in-growth into biomaterials is one of the fundamental requirements of scaffolds used in regenerative medicine. Type I collagen is the most commonly used material for soft tissue engineering, because it is nonimmunogenic and a highly porous network for cellular support can be produced. However, in general, adequate cell in-growth and cell seeding has been suboptimal. In this study we prepared collagen scaffolds of different collagen densities and investigated the cellular distribution. We also prepared a hybrid polymer-collagen scaffold to achieve an optimal cellular distribution as well as sufficient mechanical strength. Collagen scaffolds [ranging from 0.3% to 0.8% (w/v)] with and without a mechanically stable polymer knitting [poly-caprolactone (PCL)] were prepared. The porous structure of collagen scaffolds was characterized using scanning electron microscopy and hematoxylin-eosin staining. The mechanical strength of hybrid scaffolds (collagen with or without PCL) was determined using tensile strength analysis. Cellular in-growth and interconnectivity were evaluated using fluorescent bead distribution and human bladder smooth muscle cells and human urothelium seeding. The lower density collagen scaffolds showed remarkably deeper cellular penetration and by combining it with PCL knitting the tensile strength was enhanced. This study indicated that a hybrid scaffold prepared from 0.4% collagen strengthened with knitting achieved the best cellular distribution.

Urethral reconstruction of critical defects in rabbits using molecularly defined tubular type I collagen biomatrices: key issues in growth factor addition.

Tubular type I collagen biomatrices with and without growth factors (GFs) were constructed and evaluated in a rabbit model for critical urethral defects. Porous tubular biomatrices with an inner diameter of 3 mm were prepared using highly purified collagen fibrils and were crosslinked with or without heparin. Heparinized biomatrices were supplemented with the heparin-binding GFs vascular endothelial GF, fibroblast GF-2, and heparin-binding epidermal GF. Biomatrices with and without GFs were used to replace a critical 1 cm urethral segment in rabbits (n = 32). All animals showed normal urination without urinary retention. General histology and immunohistology of graft areas (2, 4, 12, and 24 weeks after implantation) indicated that all biomatrices were replaced by urethra-like structures with normal appearing cytokeratin-positive urothelium surrounded by vascularized tissue. The GF-containing biomatrices showed an increase in extracellular matrix deposition, neovascularization, urothelium, glands, granulocytes, and fibroblasts, compared with biomatrices without GF. GFs substantially improved molecular features of healing but failed to be superior in functional outcome. Retrograde urethrography indicated a normal urethral caliber in case of biomatrices without GF, but a relative narrowing of the urethra at 2 weeks postsurgery and diverticula after 4 weeks in case of biomatrices with GF. In conclusion, tubular acellular type I collagen biomatrices were successful in repairing urethral lesions in artificial urethral defects, and inclusion of GF has a profound effect on regenerative processes.