Comparative Evaluation of the Powder and Tableting Properties of Regular and Direct Compression Hypromellose from Different Vendors.

Hypromellose, a widely used polymer in the pharmaceutical industry, is available in several grades, depending on the percentage of substitution of the methoxyl and hydroxypropyl groups and molecular weight, and in various functional forms (e.g., suitable for direct compression tableting). These differences can affect their physicomechanical properties, and so this study aims to characterise the particle size and mechanical properties of HPMC K100M polymer grades from four different vendors. Eight polymers (CR and DC grades) were analysed using scanning electron microscopy (SEM) and light microscopy automated image analysis particle characterisation to examine the powder's particle morphology and particle size distribution. Bulk density, tapped density, and true density of the materials were also analysed. Flow was determined using a shear cell tester. Flat-faced polymer compacts were made at five different compression forces and the mechanical properties of the compacts were evaluated to give an indication of the powder's capacity to form a tablet with desirable strength under specific pressures. The results indicated that the CR grades of the polymers displayed a smaller particle size and better mechanical properties compared to the DC grade HPMC K100M polymers. The DC grades, however, had better flow properties than their CR counterparts. The results also suggested some similarities and differences between some of the polymers from the different vendors despite the similarity in substitution level, reminding the user that care and consideration should be given when substitution is required.

Significant impact of time-of-day variation on metformin pharmacokinetics.

AIMS/HYPOTHESIS: The objective was to investigate if metformin pharmacokinetics is modulated by time-of-day in humans using empirical and mechanistic pharmacokinetic modelling techniques on a large clinical dataset. This study also aimed to generate and test hypotheses on the underlying mechanisms, including evidence for chronotype-dependent interindividual differences in metformin plasma and efficacy-related tissue concentrations. METHODS: A large clinical dataset consisting of individual metformin plasma and urine measurements was analysed using a newly developed empirical pharmacokinetic model. Causes of daily variation of metformin pharmacokinetics and interindividual variability were further investigated by a literature-informed mechanistic modelling analysis. RESULTS: A significant effect of time-of-day on metformin pharmacokinetics was found. Daily rhythms of gastrointestinal, hepatic and renal processes are described in the literature, possibly affecting drug pharmacokinetics. Observed metformin plasma levels were best described by a combination of a rhythm in GFR, renal plasma flow (RPF) and organic cation transporter (OCT) 2 activity. Furthermore, the large interindividual differences in measured metformin concentrations were best explained by individual chronotypes affecting metformin clearance, with impact on plasma and tissue concentrations that may have implications for metformin efficacy. CONCLUSIONS/INTERPRETATION: Metformin's pharmacology significantly depends on time-of-day in humans, determined with the help of empirical and mechanistic pharmacokinetic modelling, and rhythmic GFR, RPF and OCT2 were found to govern intraday variation. Interindividual variation was found to be partly dependent on individual chronotype, suggesting diurnal preference as an interesting, but so-far underappreciated, topic with regard to future personalised chronomodulated therapy in people with type 2 diabetes.

Unexpected Stability of a Prodrug to Enzymatic Hydrolysis within a Hydrated HPMC Matrix Tablet.

The uptake of alkaline phosphate present in dissolution medium into a hydrating hydroxypropyl methylcellulose matrix tablet and that its activity was retained therein was demonstrated. This presents a risk to the stability of prodrugs that are substrates of this enzyme such as phosphonooxymethyl derivative prodrugs. It was found that fostemsavir, a phosphonooxymethyl derivative prodrug being developed for the treatment of HIV-1 infection, was unexpectedly resistant to hydrolysis within a hydrated HPMC matrix when subjected to drug release testing in media containing alkaline phosphatase. Studies indicated that this was not due to microenvironmental pH effects, osmolality effects or effective phosphate concentration effects associated with the presence of the prodrug. That the prodrug and not its parent could affect enzyme activity in a concentration dependent manner, and that another phosphate ester prodrug fosphenytoin did not inhibit alkaline phosphatase activity within a hydrated HPMC matrix suggested that the unexpected stability of the HIV-1 therapy prodrug may be associated with the ability of the phosphate group-containing compound itself to inhibit the enzyme at the concentrations it exists at in the hydrated dosage form and so enables the development of the compound in this type of dosage form.

A Combined Rheological and Thermomechanical Analysis Approach for the Assessment of Pharmaceutical Polymer Blends.

The viscoelastic nature of polymeric formulations utilised in drug products imparts unique thermomechanical attributes during manufacturing and over the shelf life of the product. Nevertheless, it adds to the challenge of understanding the precise mechanistic behaviour of the product at the microscopic and macroscopic level during each step of the process. Current thermomechanical and rheological characterisation techniques are limited to assessing polymer performance to a single phase and are especially hindered when the polymers are undergoing thermomechanical transitions. Since pharmaceutical processing can occur at these transition conditions, this study successfully proposes a thermomechanical characterisation approach combining both mechanical and rheological data to construct a comprehensive profiling of polymeric materials spanning both glassy and rubbery phases. This approach has been used in this study to assess the mechanical and rheological behaviour of heterogenous polymer blends of hydroxypropyl cellulose (HPC) and hydroxypropyl methylcellulose (HPMC) over a shearing rate range of 0.1-100 s-1 and a temperature range of 30-200 °C. The results indicate that HPC and HPMC do not appear to interact when mixing and that their mixture exhibits the mechanistic properties of the two individual polymers in accordance with their ratio in the mixture. The ability to characterise the behaviour of the polymers and their mixtures before, throughout, and after the glassy to rubbery phase transition by application of the combined techniques provides a unique insight towards a quality-by-design approach to this and other polymer-based solid dosage forms, designed with the potential to accelerate their formulation process through obviating the need for multiple formulation trials.

Loss-in-weight feeding, powder flow and electrostatic evaluation for direct compression hydroxypropyl methylcellulose (HPMC) to support continuous manufacturing.

Minimizing variability in the feeding process is important for continuous manufacturing since materials are fed individually and can impact the final product. This study demonstrates the importance of measuring powder properties and highlights the need to characterize the feeding performance both offline with multiple refills and in the intended configuration for the continuous manufacturing equipment. The standard grade hydroxypropyl methylcellulose (HPMC) had material buildup on the loss-in-weight feeder barrel from triboelectric charging and resulted in more mass flow excursions and failed refills which were not observed with the direct compression grades. The location of the electrostatic buildup changed when the feeder was connected to a hopper instead of feeding offline into a collection bucket. Overall, the direct compression HPMC exhibited better flow which resulted in more accurate loss-in-weight feeding with less excursions from the target mass flow and all refills were completed in the first attempt. The improvements with the direct compression HPMC would be beneficial when running any continuous process (wet granulation, roller compaction, or direct compression) or other processes where loss-in-weight feeding is utilized, such as melt extrusion or twin screw granulation.

Application of Focus Variation Microscopy and Dissolution Imaging in Understanding the Behaviour of Hydrophilic Matrices.

Hydrophilic matrix systems can be found in a wide range of extended release pharmaceutical formulations. The main principle of these systems is that upon contact with water, the hydrophilic component swells to form a hydrated gel layer which controls drug release. The following work demonstrates an explorative study into the use of dissolution imaging and focus variation microscopy with hydrophilic polymers. This study investigated the surface properties of xanthan gum (XG), polyethylene oxide (PEO), and hypromellose (hydroxypropyl methylcellulose, HPMC) compacts with each of these three hydrophilic polymers from one of each classification of natural, semi-synthetic, or synthetic polymer using a focus variation instrument. The auto correlation length (Sal) showed all surface profiles from the compacts displayed a value below 0.1 mm, indicating that only high frequency components (i.e., roughness) were considered and that the analysis had been successful. The developed interfacial area ratio (Sdr) displayed values below 5% in line with ISO guidelines for all the polymers studied with their texture aspect ratio values (Str) > 0.5, indicating uniformity of the surfaces of the produced compacts. Of the various parameters studied, areal material ratio (Smr2) predicted XG to wet and hydrate quicker than PEO, with PEO also wetting and hydrating quicker than the HPMC. The dissolution imaging and initial swelling studies proved to concur with the findings from the areal material ratio (Smr2) parameter, suggesting porosity was not an indicator for the ease with which water ingress occurs. This study suggests the Smr2 surface parameter to potentially predict wetting and initial hydration of hydrophilic polymers, however care should be taken as this study consists of a selected number of hydrophilic polymers.

Imaging of the Effect of Alcohol-Containing Media on the Performance of Hypromellose Hydrophilic Matrix Tablets: Comparison of Direct Compression and Regular Grades of Polymer.

As the ingestion of drug products with alcohol could have adverse effects on the release of drugs from dosage forms, it is important to understand the mechanisms underpinning the influence on drug release by evaluating the effect of alcohol-containing media on the behaviour of pharmaceutical excipients. In this work, the effect of hydroalcoholic media containing up to 40% v/v absolute ethanol was evaluated, employing both the regular (CR) and direct compression grades (DC) of hypromellose. X-ray microtomography (XµT) and magnetic resonance imaging (MRI) were used as complementary techniques in determining the influence of the media composition on the ability of the CR and DC polymers to form and evolve the gel layer that controls drug release. Particle and powder properties of the polymer were characterised to determine any relationship to performance in hydroalcoholic media. Triboelectrification results showed the CR grade formulation to charge electropositively whereas the DC grade charged electronegatively. The flow properties also showed the DC grade to have a superior flow as compared to its CR counterpart. Differences in particle morphology between the grades influenced charging and flow behaviour of the powders; however, it did not seem to impact significantly either on the mechanical strength or the drug release properties of the compacted formulation using the model drug propranolol HCl. XµT and MRI imaging were successfully used as complementary techniques in determining the gel layer/hydration layer thickness measurements as the layer developed, as well as following ingress of hydroalcoholic media and its impact on the dry core. The result showed that although differences were present in the gel layer thickness potentially due to differences in particle morphology, this also did not impact significantly on the dissolution process, especially in acidic and hydroalcoholic media.

MUCO-DIS: a New AFM-Based Nanoscale Dissolution Technique.

Mucoadhesion-based drug delivery systems have recently gained interest because of their bio-adhesion capability, which results in enhanced residence time leading to prolonged duration of action with the mucosal surface, potentially improving compliance and convenience. Mucoadhesion testing of these formulations is widely reported; however, this is technically challenging due to the absence of any standard methods and difficulty in conducting mucoadhesion, formulation-mucosal surface interaction, mucosal surface topography and drug release in a single experiment. As these measurements are currently conducted separately, on replicate formulations, results can often be subjective and difficult to correlate. Hence, the aim of the present study was to develop a new AFM-based single-entity ex vivo muco-dissolution (MUCO-DIS) technique to simultaneously evaluate mucoadhesion force, 3D surface topography, polymer dissolution and drug release characteristics. To demonstrate the potential of the current technique, the interactions between model pectin microparticles containing metformin HCl and a range of gastrointestinal mucosal surfaces (gastric, small intestine, large intestine and buccal) were studied. This novel system has not only successfully determined the mucoadhesion force, polymer dissolution and drug release information but has also highlighted the difference in microparticle performance with different mucosal targets. The current work has highlighted the potential of this newly developed MUCO-DIS system and we believe this will be a valuable tool for characterising these popular pharmaceutical formulations. This technique could also provide an opportunity to other scientific fields to evaluate materials, substrate behaviour and their interactions in their hydrated state at nanoscale with real-time chemical and surface mapping.

Characterization of a novel hydroxypropyl methylcellulose (HPMC) direct compression grade excipient for pharmaceutical tablets.

Controlled release tablets are important dosage forms enabling a slower release of the drug and better pharmacokinetics for some drugs and hydrophilic matrix tablets utilizing hydroxypropyl methylcellulose (HPMC) are one of the most common types. One of the main challenges with using HPMC is its poor flow when implemented in a direct compression process or when utilized for continuous manufacturing for which novel grades of direct compression have been developed. In this work, three different direct compression (DC) grades of HPMC (K4M, K15M and K100M) were characterized and compared to their standard grade (CR) counterparts. These materials were compared in terms of density, particle size, morphology, surface area and powder flow using multiple techniques. Results showed that the materials were almost identical in terms of particle shape and although the DC grades had better flow, the particle size was slightly smaller with an unexpectedly higher surface area, which most likely resulted from the inclusion of co-processed silicon dioxide in the DC grades. The bulk, tapped and true densities were slightly higher for all of the DC grades. Of the eleven different parameters used to characterize the flow of the materials the DC grades showed better flow than their standard CR counterparts for nine of the parameters (Carr's Index, Erweka flow, FT4 Flow Rate Index, Mean Avalanche Time, Avalanche Scatter, Number of Avalanches, Shear Cell Uni-axial Compressive Strength and Shear Cell Flow Function Coefficient). Only the FT4 Basic Flowability Energy and Specific Energy showed the opposite trend which can be explained from the testing methodology. It is recommended to evaluate the DC grades of HPMC for processes where better flowing material would have an advantage, such as direct compression, continuous manufacturing, and roller compaction if the powder flow into the rolls is problematic.

Investigation of Within-Tablet Dynamics for Extended Release of a Poorly Soluble Basic Drug from Hydrophilic Matrix Tablets Using ATR-FTIR Imaging.

Hydrophilic matrices are an effective option for oral controlled release but can face challenges in terms of bioavailability and efficacy when used in conjunction with poorly soluble, weakly basic drugs. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) imaging provides dynamic information relating to the location and chemical nature of both the sustained release matrix and the active pharmaceutical ingredient (API) during hydration/dissolution. In this study, we have identified a model system combining itraconazole (IT), a poorly soluble, weakly basic API that has pKa in the physiological range, and hydroxypropyl methylcellulose, which is a commonly used oral tablet matrix. This system was investigated to determine the swelling kinetics at different pH values at a fixed ionic strength and to facilitate the study of the influence of hydrating media pH on the drug particle movement (translocation). Using ATR-FTIR imaging, we were able to show that gel layer formation and swelling were independent of pH but highly dependent on the ionic strength of the hydrating medium in placebo tablets. When the ionic strength was fixed, gel layer formation and radial swelling were both shown to be pH-dependent when IT was incorporated into the matrix. This was verified using optical imaging. The chemical specificity of ATR-FTIR imaging permitted the observation of transformational changes of IT from the free base to the ionized form in the tablet core during hydration. This phenomenon was shown to be greater at pH 1.5 than at pH 7. ATR-FTIR imaging was able to follow drug particle translocation at both pH 1.5 and pH 7; however, the extent of migration away from the tablet core was shown to be greater at lower pH. The location of the translocated particles within the gel layer was different between the two studied pH values, with particles being located close to the swelling front at pH 7 and within the diffusion front at pH 1.5. In both pH environments, the translocated IT particles were shown to be predominantly in the free base form. No evidence of fully solubilized IT was observed in the surrounding medium because of the inherent aqueous solubility of IT being below the instrument detection limits. This work highlighted the value of utilizing a chemically specific spectroscopic tool to increase the understanding of the nature of the factors affecting the release of a pH-dependent, poorly soluble drug from a hydrophilic matrix at different pH values and permitted greater insights into what happens inside the polymer matrix during drug release.

Development of a novel method utilising dissolution imaging for the measurement of swelling behaviour in hydrophilic matrices.

A variety of imaging techniques are currently used within the field of pharmaceutics to help understand and determine a wide range of phenomena associated with drug release from hydrophilic matrix tablets. This work for the first time aims at developing an appropriate testing imaging methodology using a surface dissolution imaging instrument (SDI2) for determining the swelling of whole compacts using hypromellose as a model hydrophilic matrix former. The influence of particle morphology (CR and DC grades) and two compressional forces (5 and 15 kN) on the initial swelling behaviour of hypromellose were investigated. The results showed that a lower absorbance of 50 mAu with a wider measurement zone proved successful in determining the edge of the gel layer and growth measurements in real-time with high level of details under flow. Despite the differences in the morphology of the grades of hypromellose tested, it was however discovered that gel growth was statistically similar between them which may be attributed to their similar chemistry. This novel method also highlighted differences in the hydrated polymer's appearance which may have been as a result of differences in porosity and solid fraction. This information is of great importance to a formulator as gel growth plays a crucial role in determining drug release from polymer compacts.

Plasticiser-Free 3D Printed Hydrophilic Matrices: Quantitative 3D Surface Texture, Mechanical, Swelling, Erosion, Drug Release and Pharmacokinetic Studies.

Hydroxypropyl methyl cellulose, HPMC, a hydrophilic polymer, is widely used for the development of extended release hydrophilic matrices and it is also considered as a good contender for the fabrication of 3D printing of matrix tablets. It is often combined with plasticisers to enable extrusion. The aim of the current project was to develop plasticizer-free 3D printed hydrophilic matrices using drug loaded filaments prepared via HME to achieve an in vitro (swelling, erosion and drug release) and in vivo (drug absorption) performance which is analogous to hydrophilic matrix tablets developed through conventional approaches. Additionally, the morphology of the printed tablets was studied using quantitative 3D surface texture studies and the porosity calculated. Filaments were produced successfully and used to produce matrix tablets with acceptable drug loading (95-105%), mechanical and surface texture properties regardless of the employed HPMC grade. The viscosity of HPMC had a discernible impact on the swelling, erosion, HPMC dissolution, drug release and pharmacokinetic findings. The highest viscosity grade (K100M) results in higher degree of swelling, decreased HPMC dissolution, low matrix erosion, decreased drug release and extended drug absorption profile. Overall, this study demonstrated that the drug loaded (glipizide) filaments and matrix tablets of medium to high viscosity grades of HPMC, without the aid of plasticisers, can be successfully prepared. Furthermore, the in vitro and in vivo studies have revealed the successful fabrication of extended release matrices.