Improved Method for Dental Pulp Stem Cell Preservation and Its Underlying Cell Biological Mechanism.

Dental pulp stem cells (DPSCs) are considered a valuable cell source for regenerative medicine because of their high proliferative potential, multipotency, and availability. We established a new cryopreservation method (NCM) for collecting DPSCs, in which the tissue itself is cryopreserved and DPSCs are collected after thawing. We improved the NCM and developed a new method for collecting and preserving DPSCs more efficiently. Dental pulp tissue was collected from an extracted tooth, divided into two pieces, sandwiched from above and below using cell culture inserts, and cultured. As a result, the cells in the pulp tissue migrated vertically over time and localized near the upper and lower membranes over 2-3 days. With regard to the underlying molecular mechanism, SDF1 was predominantly involved in cell migration. This improved method is valuable and enables the more efficient collection and reliable preservation of DPSCs. It has the potential to procure a large number of DPSCs stably.

The Preventive Effect of Melatonin on Radiation-Induced Oral Mucositis.

Melatonin exerts various physiological effects through melatonin receptors and their ability to scavenge free radicals. Radiotherapy is a common treatment for head and neck tumors, but stomatitis, a side effect affecting irradiated oral mucosa, can impact treatment outcomes. This study investigated the preventive effect of melatonin, a potent free radical scavenger, on radiation-induced oral mucositis. Mice were irradiated with 15 Gy of X-ray radiation to the head and neck, and the oral mucosa was histologically compared between a melatonin-administered group and a control group. The results showed that radiation-induced oral mucositis was suppressed in mice administered melatonin before and after irradiation. It was suggested that the mechanism involved the inhibition of apoptosis and the inhibition of DNA damage. From these findings, we confirmed that melatonin has a protective effect against radiation-induced oral mucositis.

A New Implantation Method for Orthodontic Anchor Screws: Basic Research for Clinical Applications.

This study aimed to determine whether the positional relationship between the underside of the screw head and the surface of the alveolar bone could alter the stress on the two surfaces and affect the stability of implanted anchor screws. First, in order to confirm the extent of the gap between the mini-screw and the bone surface, a mini-screw was placed in the palate of rabbits and examined histologically. As a result, in the conventional screw implantation procedure, oral mucosa between the base of the screw head and the bone creates a spatial gap. Removal of the oral mucosa eliminates this gap. Then, we compared the positional difference of the screw in a contact and gap group by analyzing stress distribution on the bone and screw. Analysis using the finite element method showed that more stress was loaded on both the bone and screw in the gap group than in the contact group. Cortical bone thickness did not affect stress in either group. The effects of different load strengths were similar between groups. A surgical procedure in which mucosal coverings are removed so that implanted anchor mini-screws are in contact with the bone surface was found to reduce the stress load on both the bone and screw. This procedure can be used to prevent undesirable dislodgement of implanted mini-screws.

Improving the Detection Sensitivity of a New Rapid Diagnostic Technology for Severe Acute Respiratory Syndrome Coronavirus 2 Using a Trace Amount of Saliva.

The early diagnosis and isolation of infected individuals with coronavirus disease 2019 (COVID-19) remain important. Although quantitative polymerase chain reaction (qPCR) testing is considered the most accurate test available for COVID-19 diagnosis, it has some limitations, such as the need for specialized laboratory technicians and a long turnaround time. Therefore, we have established and reported a rapid diagnostic method using a small amount of saliva as a sample using a lightweight mobile qPCR device. This study aimed to improve the existing method and increase the detection sensitivity and specificity. The detection specificity of CDC N1 and N2 was examined by improving qPCR reagents and polymerase chain reaction conditions for the previously reported method. Furthermore, the feasibility of detecting severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) viral RNA was examined using both the previous method and the improved method in patients with COVID-19. The results showed that the improved method increased the specificity and sensitivity. This improved method is useful for the rapid diagnosis of SARS-CoV-2.

Surface Functionalization of Non-Woven Fabrics Using a Novel Silica-Resin Coating Technology: Antiviral Treatment of Non-Woven Fabric Filters in Surgical Masks.

Masks are effective for preventing the spread of COVID-19 and other respiratory infections. If antimicrobial properties can be applied to the non-woven fabric filters in masks, they can become a more effective countermeasure against human-to-human and environmental infections. We investigated the possibilities of carrying antimicrobial agents on the fiber surfaces of non-woven fabric filters by applying silica-resin coating technology, which can form silica-resin layers on such fabrics at normal temperature and pressure. Scanning electron microscopy and electron probe microanalysis showed that a silica-resin layer was formed on the fiber surface of non-woven fabric filters. Bioassays for coronavirus and quantitative reverse transcription-polymerase chain reactions (RT-PCR) revealed that all antimicrobial agents tested loaded successfully onto non-woven fabric filters without losing their inactivation effects against the human coronavirus (inhibition efficacy: >99.999%). These results indicate that this technology could be used to load a functional substance onto a non-woven fabric filter by vitrifying its surface. Silica-resin coating technology also has the potential of becoming an important breakthrough not only in the prevention of infection but also in various fields, such as prevention of building aging, protection of various cultural properties, the realization of a plastic-free society, and prevention of environmental pollution.

A New Induction Method for the Controlled Differentiation of Human-Induced Pluripotent Stem Cells Using Frozen Sections.

Considering that every tissue/organ has the most suitable microenvironment for its functional cells, controlling induced pluripotent stem cell (iPSC) differentiation by culture on frozen sections having a suitable microenvironment is possible. Induced PSCs were cultured on frozen sections of the liver, the brain, the spinal cord, and cover glasses (control) for 9 days. The iPSCs cultured on the sections of the liver resembled hepatocytes, whereas those on sections of the brain and the spinal cord resembled neuronal cells. The percentage of hepatocytic marker-positive cells in the iPSCs cultured on the sections of the liver was statistically higher than that of those in the iPSCs cultured on the sections of the brain and the spinal cord or on cover glasses. In contrast, the iPSCs cultured on the sections of the brain and the spinal cord revealed a high percentage of neural marker-positive cells. Thus, iPSCs can be differentiated into a specific cell lineage in response to specific factors within frozen sections of tissues/organs. Differentiation efficacy of the frozen sections markedly differed between the iPSC clones. Therefore, our induction method could be simple and effective for evaluating the iPSC quality.

Feasibility of Rapid Diagnostic Technology for SARS-CoV-2 Virus Using a Trace Amount of Saliva.

Containment of SARS-CoV-2 has become an urgent global issue. To overcome the problems of conventional quantitative polymerase chain reaction (qPCR) tests, we verified the usefulness of a mobile qPCR device that utilizes mouthwash to obtain a saliva sample with the aim of developing a rapid diagnostic method for SARS-CoV-2. First, we examined whether anyone could easily operate this device. Then, we examined whether RNA in the mouthwash could be detected in a short time. In addition, we investigated whether it was possible to diagnose SARS-CoV-2 infection using mouthwash obtained from COVID-19 patients undergoing hospitalization. The results revealed that all subjects were able to complete the operation properly without error. In addition, RNase P was detected in the mouthwash without pretreatment. The average detection time was 18 min, which is significantly shorter than conventional qPCR devices. Furthermore, this device detected SARS-CoV-2 in the mouthwash of a COVID-19 patient undergoing hospitalization. The above findings verified the efficacy of this diagnostic method, which had a low risk of infection, was technically simple, and provided stable results. Therefore, this method is useful for the rapid detection of SARS-CoV-2.

Grapefruit seed extract effectively inhibits the Candida albicans biofilms development on polymethyl methacrylate denture-base resin.

This study aimed to investigate the cleansing effects of grapefruit seed extract (GSE) on biofilms of Candida albicans (C. albicans) formed on denture-base resin and the influence of GSE on the mechanical and surface characteristics of the resin. GSE solution diluted with distilled water to 0.1% (0.1% GSE) and 1% (1% GSE) and solutions with Polident® denture cleansing tablet dissolved in distilled water (Polident) or in 0.1% GSE solution (0.1% G+P) were prepared as cleansing solutions. Discs of acrylic resin were prepared, and the biofilm of C. albicans was formed on the discs. The discs with the biofilm were treated with each solution for 5 min at 25°C. After the treatment, the biofilm on the discs was analyzed using a colony forming unit (CFU) assay, fluorescence microscopy, and scanning electron microscopy (SEM). In order to assess the persistent cleansing effect, the discs treated with each solution for 5 min were aerobically incubated in Yeast Nitrogen Base medium for another 24 h. After incubation, the persistent effect was assessed by CFU assay. Some specimens of acrylic resin were immersed in each solution for 7 days, and changes in surface roughness (Ra), Vickers hardness (VH), flexural strength (FS), and flexural modulus (FM) were evaluated. As a result, the treatment with 1% GSE for 5 min almost completely eliminated the biofilm formed on the resin; whereas, the treatment with 0.1% GSE, Polident, and 0.1% G+P for 5 min showed a statistically significant inhibitory effect on biofilms. In addition, 0.1% GSE and 0.1% G+P exerted a persistent inhibitory effect on biofilms. Fluorescence microscopy indicated that Polident mainly induced the death of yeast, while the cleansing solutions containing at least 0.1% GSE induced the death of hyphae as well as yeast. SEM also revealed that Polident caused wrinkles, shrinkage, and some deep craters predominantly on the cell surfaces of yeast, while the solutions containing at least 0.1% GSE induced wrinkles, shrinkage, and some damage on cell surfaces of not only yeasts but also hyphae. No significant changes in Ra, VH, FS, or FM were observed after immersion in any of the solutions. Taken together, GSE solution is capable of cleansing C. albicans biofilms on denture-base resin and has a persistent inhibitory effect on biofilm development, without any deteriorations of resin surface.

Effectiveness of 405-nm blue LED light for degradation of Candida biofilms formed on PMMA denture base resin.

This study investigated (i) the degradation effect of 405-nm blue light-emitting diode (LED) light irradiation on Candida albicans and C. glabrata biofilms formed on denture base resin and (ii) the effects of 405-nm blue LED light irradiation on the mechanical and surface characteristics of the resin. Polymethyl methacrylate denture base resin discs were prepared, and C. albicans or C. glabrata biofilms formed on the denture base resin discs. Each biofilm was irradiated with 405-nm blue LED light under a constant output power (280 mW/cm2) for different times in a moisture chamber with 100% relative humidity. Postirradiation, each biofilm was analyzed using a colony-forming unit assay, fluorescence microscopy, and scanning electron microscopy (SEM). Parallelepiped specimens of acrylic resin were prepared, and changes in their flexural strength (FS), flexural modulus (FM), and surface roughness (Ra) preirradiation and postirradiation with 405-nm blue LED light were evaluated. Irradiation for 30 min completely inhibited colony formation in both Candida species. Fluorescence microscopy showed that almost all Candida cells were killed because of irradiation. SEM images showed various cell damage patterns, such as wrinkles, shrinkage, and cell surface damage. An increase in FS was noted postirradiation, but no significant changes were observed in FM and Ra preirradiation and postirradiation. In conclusion, irradiation with 405-nm blue LED light induces degradation of C. albicans and C. glabrata biofilms on denture base resin, even in the absence of photosensitizers, without resin surface deterioration.

Cryopreservation Method for the Effective Collection of Dental Pulp Stem Cells.

Dental pulp stem cells (DPSCs) are an attractive cell source for use in cell-based therapy, regenerative medicine, and tissue engineering because DPSCs have a high cell proliferation ability and multidifferentiation capacity. However, several problems are associated with the collection and preservation of DPSCs for use in future cell-based therapy. In particular, the isolation of DPSCs for cryopreservation is time consuming and expensive. In this study, we developed a novel cryopreservation method (NCM) for dental pulp tissues to isolate suitable DPSCs after thawing cryopreserved tissue. Using the NCM, dental pulp tissues were cultured on adhesion culture dishes for 5 days and then cryopreserved. After thawing, the cryopreserved dental pulp tissue fragments exhibited cell migration. We evaluated each property of DPSCs isolated using the NCM (DPSCs-NCM) and the explant method alone without cryopreservation (DPSCs-C). DPSCs-NCM had the same proliferation capacity as DPSCs-C. Flow cytometry (FACS) analysis indicated that both DPSCs-NCM and DPSCs-C were positive for mesenchymal stem cell markers at the same level but negative for hematopoietic cell markers. Moreover, both DPSCs-NCM and DPSCs-C could differentiate into osteogenic, chondrogenic, and adipogenic cells during culture in each induction medium. These results suggest that DPSCs-NCM may be mesenchymal stem cells. Therefore, our novel method might facilitate the less expensive cryopreservation of DPSCs, thereby providing suitable DPSCs for use in patients in future cell-based therapies.