Effect of the Addition of Graphene Flakes on the Physical and Biological Properties of Composite Paints.

In this study, graphene flakes were obtained using an electrolytic method and characterized using X-ray diffraction (XRD), Raman and FTIR spectroscopy, scanning and transmission electron microscopy (SEM/TEM). Graphene-based composites with varying concentrations of 0.5%, 1% and 3% by weight were prepared with acrylic paint, enamel and varnish matrices. The mechanical properties were evaluated using micro-hardness testing, while wettability and antimicrobial activity against three pathogens (Staphylococcus aureus 33591, Pseudomonas aeruginosa 15442, Candida albicans 10231) were also examined. The results indicate that the addition of graphene flakes significantly enhances both the mechanical and antimicrobial properties of the coatings.

Optimization of the Electrochemical Method of Obtaining Graphene Nanoplatelets (GNPs).

Graphene nanoplatelets (GNPs) were prepared using the electrolytic exfoliation method on graphite foil in an ammonium sulfate solution. A series of experiments were conducted in order to optimize the production of the flakes by varying the pH of the solution, applied voltage and current, duration of electrolysis, temperature in the electrolytic system, and type and duration of the ultrasound interaction. The quality of the produced graphene nanoplatelets was analyzed using X-ray diffraction, Raman and IR spectroscopy, and TEM.

Laser induced white emission generation from La1-xNdxAlO3 nanocrystals.

The synthesis and structural characteristics of nanocrystalline LaAlO3 perovskites doped with different concentrations of Nd3+ ions are reported. Their excitation and Stokes emission spectra, in which significant concentration quenching was observed, were recorded and characterized. The measurements of anti-Stokes laser induced white emission (LIWE) spectra were also performed. It was found that the LIWE intensity increased exponentially with the excitation laser power above the excitation threshold. In particular, the concentration and pressure dependences of the LIWE spectra of La1-xNdxAlO3 were investigated. Despite the pronounced concentration quenching observed in the Stokes emission, no such effect could be observed in the anti-Stokes one. A possible inter-valence charge transfer (IVCT) mechanism for the white emission, in which different bands that were observed correspond to different valences of Nd, is proposed.

Influence of Sintering Parameters on Spectroscopic Properties of BMW: Eu3+ Ceramic Materials Prepared by HPLT Technique.

In this work, Ba2MgWO6: Eu3+ (BMW: Eu3+) ceramic materials with a double perovskite structure were sintered using the High-Pressure Low-Temperature sintering (HPLT) technique. As part of the research, the influence of pressure (CP), sintering temperature (CT), and sintering time (CTS) on the structure and luminescence of the doped BMW were determined. Structural analysis via XRD and SEM + EDS and spectroscopic analysis via emission and excitation spectra, decay time, and absorption spectra of the obtained ceramics were performed. Dense double perovskite ceramics were obtained with a cubic structure with optimal sintering parameters: T = 500 °C, p = 8 GPa, and t = 1 min. The increase in temperature caused an increased extinction of the luminescence due to the diffusion of carbon into the ceramics. The increase in pressure led to the formation of the amorphous phase, which increased the speed of non-radiative transitions and also led to the extinction of the luminescence. The increase in sintering time from 1 to 3 min enhanced the luminescence output, but when the ceramic was sintered for 5 min, the luminescence was quenched, most likely by increasing the rate of the non-radiative process, as evidenced by reduced decay time.

Crystallization of Lanthanide-Ho3+ and Tm3+ Ions Doped Tellurite Glasses.

In the presented work, the tellurite glasses TeO2-WO3-ZnO doped with Tm3+ and Ho3+ ions were prepared by the same glass forming method. X-ray diffraction (XRD) and differential thermal analysis (DTA) techniques were used to study the effects of the forming technology on the thermal and structural properties of the fabricated glasses. After controlled crystallization of investigated glasses, the emission in the VIS- and NIR range was determined. The effect of silver doping on emission intensity was investigated. The value of the activation energy of the glass crystallization process was determined, while the Ea value for pure TeO2 glass was much lower than for tellurite glasses TeO2-WO3-ZnO.

Laser-Induced Generation of Hydrogen in Water by Using Graphene Target.

A new method of hydrogen generation from water, by irradiation with CW infrared laser diode of graphene scaffold immersed in solution, is reported. Hydrogen production was extremely efficient upon admixing NaCl into water. The efficiency of hydrogen production increased exponentially with laser power. It was shown that hydrogen production was highly efficient when the intense white light emission induced by laser irradiation of graphene foam was occurring. The mechanism of laser-induced dissociation of water is discussed. It was found that hydrogen production was extremely high, at about 80%, and assisted by a small emission of O2, CO and CO2 gases.

Laser induced visible and infrared emission of a tungsten filament.

The measurements of laser induced emission (LIE) of a tungsten filament upon irradiation with the focused beam of a CW IR laser diode are reported. It was found that the emission occurred in visible and infrared range. The influence of the applied DC electric field significantly affected the intensity of LIE of the tungsten filament. The origin of LIE is discussed in terms of multiphoton ionization of tungsten W+ atoms assisted by light emission due to the intervalence charge transfer in the tungsten hybrid domain (W, W+).

Laser-Induced Hydrogen Generation from Methanol with Graphene Aerogel as the Target.

The present work demonstrates a new concept of the efficient generation of hydrogen from methanol by the continuous wave laser diode irradiation of an immersed graphene aerogel (GA) scaffold as the target. It was observed that the process occurred very intensively when it was assisted by bright white light emission in the spot of a laser-irradiated GA scaffold. The yield of hydrogen emission increased exponentially with the applied laser power. The light emission was assisted by the intense production of H2, CH4, and CO gases. It was found that with increasing excitation laser power, the H2 generation increased at the expense of CO. It is shown that the volume of CO decreases because of the formation of C2 molecules and CO2 gases. The mechanism of the laser-driven dissociation of methanol was discussed in terms of the violent ejection of hot electrons from the GA surface as a result of the laser-induced light emission of the graphene target.

Studies of graphene influence on the laser induced white emission spectra of Sr2CeO4/graphene flake composites.

The Stokes and anti-Stokes emission spectra generated from Sr2CeO4/graphene flake composites were investigated. The excitation and emission spectra, decay profiles and quantum efficiency of the studied materials were collected. It was found that the addition of graphene flakes (GFs) significantly affects spectroscopic properties. In particular, the anti-Stokes laser induced white emission spectra were analyzed as a function of excitation laser power, and ambient atmospheric pressure. The influence of graphene flakes concentration on laser induced photocurrent was investigated. The color of their emission significantly differs from the color of other tested composites. In particular, the impact of graphene concentration on the investigated features will be presented and mechanisms responsible for the observed effects will be discussed.

Magnetic Properties of La0.9A0.1MnO3 (A: Li, Na, K) Nanopowders and Nanoceramics.

Nanocrystalline La0.9A0.1MnO3 (where A is Li, Na, K) powders were synthesized by a combustion method. The powders used to prepare nanoceramics were fabricated via a high-temperature sintering method. The structure and morphology of all compounds were characterized by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). It was found that the size of the crystallites depended on the type of alkali ions used. The high-pressure sintering method kept the nanosized character of the grains in the ceramics, which had a significant impact on their physical properties. Magnetization studies were performed for both powder and ceramic samples in order to check the impact of the alkali ion dopants as well as the sintering pressure on the magnetization of the compounds. It was found that, by using different dopants, it was possible to strongly change the magnetic characteristics of the manganites.

Laser induced white lighting of graphene foam.

Laser induced white light emission was observed from porous graphene foam irradiated with a focused continuous wave beam of the infrared laser diode. It was found that the intensity of the emission increases exponentially with increasing laser power density, having a saturation level at ca. 1.5 W and being characterized by stable emission conditions. It was also observed that the white light emission is spatially confined to the focal point dimensions of the illuminating laser light. Several other features of the laser induced white light emission were also discussed. It was observed that the white light emission is highly dependent on the electric field intensity, allowing one to modulate the emission intensity. The electric field intensity ca. 0.5 V/µm was able to decrease the white light intensity by half. Origins of the laser-induced white light emission along with its characteristic features were discussed in terms of avalanche multiphoton ionization, inter-valence charge transfer and possible plasma build-up processes. It is shown that the laser-induced white light emission may be well utilized in new types of white light sources.