RESUMO
A bacterium, Acinetobacter soli ANG344B, isolated from river water, exhibited an exceptional capacity to produce 2-phenylethanol (2-PE) using L-phenylalanine (L-Phe) as a precursor-a capability typically observed in yeasts rather than bacteria. Bioreactor experiments were conducted to evaluate the production performance, using glucose as the carbon source for cellular growth and L-Phe as the precursor for 2-PE production. Remarkably, A. soli ANG344B achieved a 2-PE concentration of 2.35 ± 0.26 g/L in just 24.5 h of cultivation, exhibiting a global volumetric productivity of 0.10 ± 0.01 g/L.h and a production yield of 0.51 ± 0.01 g2-PE/gL-Phe, a result hitherto reported only for yeasts. These findings position A. soli ANG344B as a highly promising microorganism for 2-PE production. Whole-genome sequencing of A. soli strain ANG344 revealed a genome size of 3.52 Mb with a GC content of 42.7 %. Utilizing the Rapid Annotation using Subsystem Technology (RAST) server, 3418 coding genes were predicted, including genes coding for enzymes previously associated with the metabolic pathway of 2-PE production in other microorganisms, yet unreported in Acinetobacter species. Through gene mapping, 299 subsystems were identified, exhibiting 30 % subsystem coverage. The whole genome sequence data was submitted to NCBI GeneBank with the BioProject ID PRJNA982713. These draft genome data offer significant potential for exploiting the biotechnological capabilities of A. soli strain ANG344 and for conducting further comparative genomic studies.
RESUMO
In recent years, polyhydroxyalkanoates (PHAs) have gained notoriety because of their desirable properties that include proven biodegradability, biocompatibility, and thermal stability, which make them suitable alternatives to fossil-based polymers. However, the widespread use of PHAs is still challenging because of their production costs, which are greatly associated with the cultivation medium used for bacterial cultivation. In Portugal, one-quarter of the forest area is covered by Eucalyptus globulus wood, making its residues a cheap, abundant, and sustainable potential carbon source for biotechnological uses. In this work, eucalyptus bark was used as the sole feedstock for PHA production in a circular bioeconomic approach. Eucalyptus bark hydrolysate was obtained after enzymatic saccharification using Cellic® CTec3, resulting in a sugar-rich solution containing glucose and xylose. Although with differing performances, several bacteria were able to grow and produce PHA with distinct compositions, using the enzymatic hydrolysate as the sole carbon source. Pseudomonas citronellolis NRRL B-2504 achieved a high cellular growth rate in bioreactor assays (24.4 ± 0.15 g/L) but presented a low accumulation of a medium-chain-length PHA (mcl-PHA) comprising the monomers hydroxydecanoate (HD, 65%), hydroxydodecanoate (HDd, 25%), and hydroxytetradecanoate (HTd, 14%). Burkholderia thailandensis E264, on the other hand, reached a lower cellular growth rate (8.87 ± 0.34 g/L) but showed a higher biopolymer accumulation, with a polyhydroxybutyrate (PHB) content in the cells of 12.3 wt.%. The new isolate, Pseudomonas sp., revealed that under nitrogen availability, it was able to reach a higher accumulation of the homopolymer PHB (31 wt.%). These results, although preliminary, demonstrate the suitability of eucalyptus bark's enzymatic hydrolysate as a feedstock for PHA production, thus offering an exciting avenue for achieving sustainable and environmentally responsible plastic products from an undervalued forestry waste.
RESUMO
Marine environments represent an enormous biodiversity reservoir due to their numerous different habitats, being abundant in microorganisms capable of producing biomolecules, namely exopolysaccharides (EPS), with unique physical characteristics and applications in a broad range of industrial sectors. From a total of 67 marine-derived bacteria obtained from marine sediments collected at depths of 200 to 350 m from the Estremadura Spur pockmarks field, off the coast of Continental Portugal, the Brevundimonas huaxiensis strain SPUR-41 was selected to be cultivated in a bioreactor with saline culture media and glucose as a carbon source. The bacterium exhibited the capacity to produce 1.83 g/L of EPS under saline conditions. SPUR-41 EPS was a heteropolysaccharide composed of mannose (62.55% mol), glucose (9.19% mol), rhamnose (19.41% mol), glucuronic acid (4.43% mol), galactose (2.53% mol), and galacturonic acid (1.89% mol). Moreover, SPUR-41 EPS also revealed acyl groups in its composition, namely acetyl, succinyl, and pyruvyl. This study revealed the importance of research on marine environments for the discovery of bacteria that produce new value-added biopolymers for pharmaceutical and other biotechnological applications, enabling us to potentially address saline effluent pollution via a sustainable circular economy.
Assuntos
Biotecnologia , Polissacarídeos Bacterianos , Bactérias , Reatores Biológicos , BiopolímerosRESUMO
Phenazines are a large group of heterocyclic nitrogen-containing compounds with demonstrated insecticidal, antimicrobial, antiparasitic, and anticancer activities. These natural compounds are synthesized by several microorganisms originating from diverse habitats, including marine and terrestrial sources. The most well-studied producers belong to the Pseudomonas genus, which has been extensively investigated over the years for its ability to synthesize phenazines. This review is focused on the research performed on pseudomonads' phenazines in recent years. Their biosynthetic pathways, mechanism of regulation, production processes, bioactivities, and applications are revised in this manuscript.
Assuntos
Fenazinas , Pseudomonas , Pseudomonas/metabolismo , Fenazinas/farmacologia , Ecossistema , Vias BiossintéticasRESUMO
Biobased raw materials like natural polysaccharides are increasingly sought by the cosmetic industry for their valuable properties. Such biodegradable and usually non-cytotoxic biopolymers are commonly used in skin-care products as rheological modifiers, bioemulsifiers and/or bioactive ingredients. FucoPol is a natural polysaccharide with reported biocompatibility, emulsion-forming and stabilizing capacity, shear-thinning behavior and bioactivity (e.g., antioxidant capacity, wound healing ability) that potentiate its utilization in skin-care products. In this study, olive oil and α-tocopherol containing emulsions were stabilized with FucoPol. Although the presence of α-tocopherol negatively impacted the emulsions' stability, it increased their emulsification index (EI). Moreover, FucoPol outperformed the commercial emulsifier Sepigel® 305, under the tested conditions, with higher EI and higher stability under storage for 30 days. The formulation of FucoPol-based emulsions with olive oil and α-tocopherol was studied by Response Surface Methodology (RSM) that allowed the definition of the ingredients' content to attain high emulsification. The RSM model established that α-tocopherol concentration had no significant impact on the EI within the tested ranges, with optimal emulsification for FucoPol concentration in the range 0.7-1.2 wt.% and olive oil contents of 20-30 wt.%. Formulations with 25 wt.% olive oil and either 0.5 or 2.0 wt.% α-tocopherol were emulsified with 1.0 wt.% or 0.7 wt.% FucoPol, respectively, resulting in oil-in-water (O/W) emulsions. The emulsions had similar shear-thinning behavior, but the formulation with higher FucoPol content displayed higher apparent viscosity, higher consistency, as well as higher firmness, adhesiveness and cohesiveness, but lower spreadability. These findings show FucoPol's high performance as an emulsifier for olive oil/α-tocopherol, which are supported by an effective impact on the physicochemical and structural characteristics of the emulsions. Hence, this natural polysaccharide is a potential alternative to other emulsifiers.
RESUMO
Enhanced co-production of medium-chain-length polyhydroxyalkanoates (mcl-PHA) and extracellular phenazines was assessed through a high cell density cultivation of Pseudomonas chlororaphis subsp. aurantiaca (DSM 19603) in a membrane bioreactor using crude glycerol as a fermentative substrate. A maximum dry cell weight (DCW) of 59.25 ± 0.31 g/L was achieved at 90 h of cultivation with a maximum mcl-PHA and extracellular phenazines concentrations of respectively 19.05 ± 0.04 g/L (32.16% of DCW) and 79.42 ± 0.35 mg/L. mcl-PHA concentration achieved through cell retention culture was 28.43-folds higher than that obtained by batch culture. Fourier transform infrared spectroscopy, gas chromatography-mass spectrometry, and 1H nuclear magnetic resonance analysis identified the produced PHA as a mcl-PHA copolymer of 3-hydroxyhexanoate (0.68%), 3-hydroxyoctanoate (7.76%), 3-hydroxydecanoate (49.18%), 3-hydroxydodecanoate (4.89%), and 3-hydroxytetradecanoate (37.50%). The mcl-PHA exhibited a highly amorphous structure with low crystallinity index (4.19%) and high thermal stability. This is the first report on the enhanced co-production of mcl-PHA and phenazines in a membrane bioreactor.
Assuntos
Poli-Hidroxialcanoatos , Pseudomonas chlororaphis , Reatores Biológicos , Contagem de Células , Glicerol/química , Fenazinas , PseudomonasRESUMO
Biosurfactants synthesized by microorganisms represent safe and sustainable alternatives to the use of synthetic surfactants, due to their lower toxicity, better biodegradability and biocompatibility, and their production from low-cost feedstocks. In line with this, the present study describes the physical, chemical, and functional characterization of the biopolymer secreted by the bacterium Burkholderia thailandensis DSM 13276, envisaging its validation as a biosurfactant. The biopolymer was found to be a glycolipopeptide with carbohydrate and protein contents of 33.1 ± 6.4% and 23.0 ± 3.2%, respectively. Galactose, glucose, rhamnose, mannose, and glucuronic acid were detected in the carbohydrate moiety at a relative molar ratio of 4:3:2:2:1. It is a high-molecular-weight biopolymer (1.0 × 107 Da) with low polydispersity (1.66), and forms aqueous solutions with shear-thinning behavior, which remained after autoclaving. The biopolymer has demonstrated a good emulsion-stabilizing capacity towards different hydrophobic compounds, namely, benzene, almond oil, and sunflower oil. The emulsions prepared with the biosurfactant, as well as with its autoclaved solution, displayed high emulsification activity (>90% and ~50%, respectively). Moreover, the almond and sunflower oil emulsions stabilized with the biosurfactant were stable for up to 4 weeks, which further supports the potential of this novel biopolymer for utilization as a natural bioemulsifier.
RESUMO
Komagataeibacter xylinus strains DSM 2004 and DSM 46604 were evaluated for their ability to grow and produce bacterial cellulose (BC) upon cultivation on terephthalic acid (TA) and ethylene glycol (EG), which are monomers of the petrochemical-derived plastic polyethylene terephthalate (PET). Both strains were able to utilize TA, EG, and their mixtures for BC synthesis, with different performances. K. xylinus DSM 2004 achieved higher BC production from TA (0.81 ± 0.01 g/L), EG (0.64 ± 0.02 g/L), and TA + EG mixtures (0.6 ± 0.1 g/L) than strain DSM 46604. The latter was unable to utilize EG as the sole carbon source and reached a BC production of 0.16 ± 0.01 g/L and 0.23 ± 0.1 g/L from TA alone or TA + EG mixtures, respectively. Further supplementing the media with glucose enhanced BC production by both strains. During cultivation on media containing TA and EG, rapid pH drop due to metabolization of EG into acidic compounds led to some precipitation of TA that was impregnated into the BC pellicles. An adaptation of the downstream procedure involving BC dissolution in NaOH was used for the recovery of pure BC. The different medium composition tested, as well as the downstream procedure, impacted the BC pellicles' physical properties. Although no variation in terms of the chemical structure were observed, differences in crystallinity degree and microstructure of the produced BC were observed. The BC produced by K. xylinus DSM 2004 had a higher crystallinity (19-64%) than that of the strain DSM 46604 (17-53%). Moreover, the scanning electron microscopy analysis showed a higher fiber diameter for K. xylinus DSM 2004 BC (46-56 nm) than for K. xylinus DSM 46604 (37-49 nm). Dissolution of BC in NaOH did not influence the chemical structure; however, it led to BC conversion from type I to type II, as well as a decrease in crystallinity. These results demonstrate that PET monomers, TA and EG, can be upcycled into a value-added product, BC, presenting an approach that will contribute to lessening the environmental burden caused by plastic disposal in the environment.
RESUMO
The electrospinnability of FucoPol, a bacterial exopolysaccharide, is presented for the first time, evaluated alone and in combination with other polymers, such as polyethylene oxide (PEO) and pullulan. The obtained fibers were characterized in terms of their morphological, structural and thermal properties. Pure FucoPol fibers could not be obtained due to FucoPol's low water solubility and a lack of molecular entanglements. Nanofibers were obtained via blending with PEO and pullulan. FucoPol:PEO (1:3 w/w) showed fibers with well-defined cylindrical structure, since the higher molecular weight of PEO helps the continuity of the erupted jet towards the collector, forming stable fibers. WAXS, DSC and TGA showed that FucoPol is an amorphous biopolymer, stable until 220 °C, whereas FucoPol-PEO fibers were stable until 140 °C, and FucoPol:pullulan fibers were stable until 130 °C. Interestingly, blended components influenced one another in intermolecular order, since new peaks associated to intermolecular hierarchical assemblies were seen by WAXS. These results make FucoPol-based systems viable candidates for production of nanofibers for packaging, agriculture, biomedicine, pharmacy and cosmetic applications.
RESUMO
In this study, membrane-based methods were evaluated for the recovery of FucoPol, the fucose-rich exopolysaccharide (EPS) secreted by the bacterium Enterobacter A47, aiming at reducing the total water consumption and extraction time, while keeping a high product recovery, thus making the downstream procedure more sustainable and cost-effective. The optimized method involved ultrafiltration of the cell-free supernatant using a 30 kDa molecular weight cut-off (MWCO) membrane that allowed for a 37% reduction of the total water consumption and a 55% reduction of the extraction time, compared to the previously used method (diafiltration-ultrafiltration with a 100 kDa MWCO membrane). This change in the downstream procedure improved the product's recovery (around 10% increase) and its purity, evidenced by the lower protein (8.2 wt%) and inorganic salts (4.0 wt%) contents of the samples (compared to 9.3 and 8.6 wt%, respectively, for the previously used method), without impacting FucoPol's sugar and acyl groups composition, molecular mass distribution or thermal degradation profile. The biopolymer's emulsion-forming and stabilizing capacity was also not affected (emulsification activity (EA) with olive oil, at a 2:3 ratio, of 98 ± 0% for all samples), while the rheological properties were improved (the zero-shear viscosity increased from 8.89 ± 0.62 Pa·s to 17.40 ± 0.04 Pa·s), which can be assigned to the higher purity degree of the extracted samples. These findings demonstrate a significant improvement in the downstream procedure raising FucoPol's recovery, while reducing water consumption and operation time, key criteria in terms of process economic and environmental sustainability. Moreover, those changes improved the biopolymer's rheological properties, known to significantly impact FucoPol's utilization in cosmetic, pharmaceutical or food products.
RESUMO
Large quantities of waste biomass are generated annually worldwide by many industries and are vastly underutilized. However, these wastes contain sugars and other dissolved organic matter and therefore can be exploited to produce microbial biopolymers. In this study, four selected Halomonas strains, namely, Halomonas caseinilytica K1, Halomonas elongata K4, Halomonas smyrnensis S3, and Halomonas halophila S4, were investigated for the production of exopolysaccharides (EPS) using low-cost agro-industrial wastes as the sole carbon source: cheese whey, grape pomace, and glycerol. Interestingly, both yield and monosaccharide composition of EPS were affected by the carbon source. Glucose, mannose, galactose, and rhamnose were the predominant monomers, but their relative molar ratio was different. Similarly, the average molecular weight of the synthesized EPS was affected, ranging from 54.5 to 4480 kDa. The highest EPS concentration (446 mg/L) was obtained for H. caseinilytica K1 grown on cheese whey that produced an EPS composed mostly of galactose, rhamnose, glucose, and mannose, with lower contents of galacturonic acid, ribose, and arabinose and with a molecular weight of 54.5 kDa. Henceforth, the ability of Halomonas strains to use cost-effective substrates, especially cheese whey, is a promising approach for the production of EPS with distinct physicochemical properties suitable for various applications.
Assuntos
Halomonas , Resíduos Industriais , Peso Molecular , Monossacarídeos , Polissacarídeos Bacterianos/químicaRESUMO
Bacterial cellulose is one of the most promising biomaterials for the development of a wide array of novel biotechnological solutions. Nevertheless, the commercial production of bacterial cellulose is still a challenge and obtaining novel strains presenting increased cellulose biosynthesis and stress resistance properties is of extreme importance. This work demonstrates the increased stress resistance, cellulose production abilities, and overall genomic properties of Komagataeibacter uvaceti FXV3, a novel cellulose-producing and stress resistant strain isolated from a fermented grape must. K. uvaceti FXV3 was able to grow under several stress conditions, including the presence of high concentrations of ethanol (up to 7.5 % v/v), a trait that is not observed in the model strain K. xylinus CECT 7351T. Moreover, K. uvaceti FXV3 produced increased concentrations of cellulose (4.31 mg/mL, 7 days after inoculation-DAI) when compared to K. xylinus CECT 7351T (1.42 mg/mL, 7 DAI). Moreover, the detailed analysis of strain FXV3 genome revealed the presence of several genes involved in cellulose and acetan biosynthesis, quorum-sensing and quenching mechanisms, carbohydrate, amino acid, alcohol and aldehyde metabolism, as well as several other genes involved in stress resistance. Additionally, comparative genomic analysis revealed the increased prevalence of stress resistance genes in K. uvaceti FXV3 when compared to K. xylinus CECT 7351T. Ultimately, this study reveals the increased biotechnological potential of K. uvaceti FXV3 and brings new insights into the genetics behind Komagataeibacter stress resistance and cellulose production abilities.
RESUMO
The growing consumer demand for natural products led to an increasing interest in vanillin production by biotechnological routes. In this work, the biotechnological vanillin production by Amycolatopsis sp. ATCC 39116 is studied using ferulic acid as precursor, aiming to achieve maximized vanillin productivities. During biotech-vanillin production, the effects of glucose, vanillin and ferulic acid concentrations in the broth proved to be relevant for vanillin productivity. Concerning glucose, its presence in the broth during the production phase avoids vanillin conversion to vanillic acid and, consequently, increases vanillin production. To avoid the accumulation of vanillin up to a toxic concentration level, a multiple-pulse-feeding strategy is implemented, with intercalated vanillin removal from the broth and biomass recovery. This strategy turned out fruitful, leading to 0.46 g L-1 h-1 volumetric productivity of vanillin of and a production yield of 0.69 gvanillin gferulic acid-1, which are among the highest values reported in the literature for non-modified bacteria.
Assuntos
Amycolatopsis/metabolismo , Benzaldeídos/química , Reatores Biológicos , Biotecnologia/métodos , Microbiologia Industrial/métodos , Oxigênio/química , Álcoois Benzílicos , Biomassa , Ácidos Cumáricos/química , Meios de Cultura , Glucose/química , Concentração de Íons de Hidrogênio , Cinética , Fenol/química , Ácido Vanílico/químicaRESUMO
This study reports the performance of the polysaccharide FucoPol as an enhancer of cryoprotective formulations. FucoPol at a concentration of 0.25% (w/v) was added to several normothermic Dulbecco-derived solutions and hypothermic Euro-Collins, Custodiol-HTK, and Unisol-CV media, substituting some constituents in the latter class to develop FucoPol-based formulations that were tested for their ability to cryopreserve Vero cells. Supplementation yielded post-thaw cell recovery enhancements of at least 70% and averaged at 82%. The FucoPol-supplemented formulations Dulbecco(+)+FP and Unisol-CVS3 achieved cell viabilities capable of competing with the commercial cryogenic formula CryoStor CS5. Particularly in Unisol-CVS3, mannitol, glucose, gluconate, and dextran were all substituted by 0.25% FucoPol, and still, a similar viability was achieved. Multiparametric correlation clustering showed that FucoPol cryoprotection synergizes best with K+, Ca2+, and Cl- in its microenvironment. Component substitution analysis demonstrated that FucoPol acts consistently as a cryoprotectant, an impermeant, and a colloidal stabilizer, providing a combined alternative to glucose, mannitol, gluconate, and dextran, thus highlighting its potential in the development of high-performing cryoprotective formulas.
Assuntos
Crioprotetores , Fucose , Polissacarídeos Bacterianos , Animais , Sobrevivência Celular , Chlorocebus aethiops , Criopreservação , Endotoxinas/análise , Concentração de Íons de Hidrogênio , Reologia , Células VeroRESUMO
The purpose of this work is the development and characterisation of new hybrid polysaccharide (FucoPol) membranes. These membranes were prepared by incorporation of a SiO2 network homogeneously dispersed by using a sol-gel method with GPTMS as a crosslinker silica precursor. They were further crosslinked with CaCl2 for reinforcement of mechanical properties and improvement of their permeation performance. They were characterised in terms of their structural, mechanical and thermal properties. They presented a dense and homogeneous structure, resistant to deformation, with a Tg of 43⯰C and a thermal decomposition between 240 and 251⯰C. The hybrid FucoPol membranes were tested for ethanol dehydration by pervaporation and also for nitrogen dehydration. They exhibited high water selectivity values, similar to PERVAP® 4101, however they lost their stability when exposed to solutions of 10.0â¯wt.% water in ethanol. In contrast, these membranes were stable when applied in N2 dehydration, leading to reproducible performance and very high water selectivities.
RESUMO
The potential of a bacterial exopolysaccharide named FucoPol, produced by the bacterium Enterobacter A47, as encapsulation matrix was explored. Spherical capsules with a smooth surface were produced by spray drying. The obtained microcapsules had average diameters ranging from 0.5 to 26.7µm and presented thin walls (thickness from 222 to 1094nm). The capsules were loaded with two bioactive compounds: gallic acid (GA) and oregano essential oil (OEO). Both bioactive materials were encapsulated in FucoPol particles, retaining their antioxidant activity after the drying process. Release studies showed that GA release in simulated gastric and intestinal fluids was faster than that of OEO, envisaging that the latter had established stronger interactions with the polymer matrix. These results suggest that FucoPol has a good potential for use as encapsulating material of bioactive compounds for application in several areas, including food, cosmetic or pharmaceutical products.
Assuntos
Portadores de Fármacos/química , Fucose/química , Polissacarídeos Bacterianos/química , Antioxidantes/química , Cápsulas , Liberação Controlada de Fármacos , Enterobacter/química , Interações Hidrofóbicas e HidrofílicasRESUMO
Although the ability to secrete exopolysaccharides (EPS) is widespread among microorganisms, only a few bacterial (e.g. xanthan, levan, dextran) and fungal (e.g. pullulan) EPS have reached full commercialization. During the last years, other microbial EPS producers have been the subject of extensive research, including endophytes, extremophiles, microalgae and Cyanobacteria, as well as mixed microbial consortia. Those studies have demonstrated the great potential of such microbial systems to generate biopolymers with novel chemical structures and distinctive functional properties. In this work, an overview of the bioprocesses developed for EPS production by the wide diversity of reported microbial producers is presented, including their development and scale-up. Bottlenecks that currently hinder microbial EPS development are identified, along with future prospects for further advancement.
Assuntos
Biopolímeros , Microalgas , Polissacarídeos Bacterianos , Cianobactérias , Consórcios MicrobianosRESUMO
Enterobacter A47 is a bacterium that produces high amounts of a fucose-rich exopolysaccharide (EPS) from glycerol residue of the biodiesel industry. The fed-batch process is characterized by complex non-linear dynamics with highly viscous pseudo-plastic rheology due to the accumulation of EPS in the culture medium. In this paper, we study hybrid modeling as a methodology to increase the predictive power of models for EPS production optimization. We compare six hybrid structures that explore different levels of knowledge-based and machine-learning model components. Knowledge-based components consist of macroscopic material balances, Monod type kinetics, cardinal temperature and pH (CTP) dependency and power-law viscosity models. Unknown dependencies are set to be identified by a feedforward artificial neural network (ANN). A semiparametric identification schema is applied resorting to a data set of 13 independent fed-batch experiments. A parsimonious hybrid model was identified that describes the dynamics of the 13 experiments with the same parameterization. The final model is specific to Enterobacter A47 but can be easily extended to other microbial EPS processes.
Assuntos
Enterobacter/crescimento & desenvolvimento , Fucose/química , Polissacarídeos Bacterianos/biossíntese , Técnicas de Cultura Celular por Lotes , Reatores Biológicos/microbiologia , Enterobacter/metabolismo , Aprendizado de Máquina , Modelos Teóricos , Dinâmica não Linear , Reologia , ViscosidadeRESUMO
Bilayer films of FucoPol and chitosan were prepared and characterized in terms of optical, morphologic, hygroscopic, mechanical and barrier properties, to evaluate their potential application in food packaging. Bilayer films have shown dense and homogeneous layers, and presented enhanced properties when comparing to monolayer FucoPol films. Though, a high swelling degree in contact with liquid water (263.3%) and a high water vapour permeability (0.75×10(-11)mol/msPa), typical of polysaccharide films, was still observed. However, they presented a low permeability to O2 and CO2 (0.47×10(-16)molm/m(2)sPa and 5.8×10(-16)molm/m(2)sPa, respectively). Tensile tests revealed a flexible and resistant film with an elongation at break of 38% and an elastic modulus of 137MPa. The studied properties, in particular the excellent barrier to gases, impart these bilayer films potential to be used in packaging of low moisture content products, as well as in multilayered hydrophobic/hydrophilic/hydrophobic barriers for food products with a broader range of water content.
Assuntos
Quitosana/química , Embalagem de Alimentos/normas , Permeabilidade , Polissacarídeos/química , Resistência à Tração , Água/químicaRESUMO
Exopolysaccharides (EPS) are polymers excreted by some microorganisms with interesting properties and used in many industrial applications. A new Pseudoalteromonas sp. strain, MD12-642, was isolated from marine sediments and cultivated in bioreactor in saline culture medium containing glucose as carbon source. Its ability to produce EPS under saline conditions was demonstrated reaching an EPS production of 4.4g/L within 17hours of cultivation, corresponding to a volumetric productivity of 0.25g/Lh, the highest value so far obtained for Pseudoalteromonas sp. strains. The compositional analysis of the EPS revealed the presence of galacturonic acid (41-42mol%), glucuronic acid (25-26mol%), rhamnose (16-22mol%) and glucosamine (12-16mol%) sugar residues. The polymer presents a high molecular weight (above 1000kDa). These results encourage the biotechnological exploitation of strain MD12-642 for the production of valuable EPS with unique composition, using saline by-products/wastes as feedstocks.