RESUMO
This article proposes a technique to simplify the cementation of indirect restorations by exploiting the advantageous properties of bulk-fill composites (BFCs). The proposed technique consists of using a thin layer of a high-viscosity (HV) BFC in the interproximal margins of the preparation and applying low-viscosity (LV) resin luting agents (RLAs) to the rest of the prepared surface. The application of the HV BFC limits the extrusion of the LV RLAs in the interproximal area, deviating the excesses of LV RLAs only on the vestibular and lingual side. This deviation allows the management and control of the excess material in complicated interproximal spaces, simplifying the cementation procedure of indirect restorations and achieving a reliable final result in terms of removing excess in a safe and repeatable way. This technical report provides an alternative clinical approach for cementing indirect restorations using the consistency and viscosity of different RLAs.
RESUMO
BACKGROUND: Given the lack of an ideal endodontic irrigant on the market, this study evaluates the antimicrobial potential of a formulated solution of 2'-fucosyllactose and lacto-N-neotetraose against E. faecalis within infected root canals, and explores any associated impacts related to the duration of irrigation. METHODS: 32 single-rooted teeth extracted for periodontal reasons were infected with Enterococcus faecalis, and subsequently subjected to endodontic treatment with two different irrigation systems: sodium hypochlorite or a solution of 2'-fucosyllactose and lacto-N-neotetraose. These samples were then incubated in sterile culture media at 37 °C to observe microbial activity through turbidity. The culture broth of each individual sample was assessed as positive or negative by observing the turbidity or lack of turbidity in the culture at the time of evaluation. RESULTS: the analysis of the results obtained from the comparison of groups irrigated with sodium hypochlorite or a solution of 2'-fucosyllactose and lacto-N-neotetraose demonstrates that the case solution has no bactericidal effect against E. faecalis inoculated in the endodontic system. CONCLUSIONS: the HMOs used in this study do not have a bactericidal effect on E. faecalis inoculated in an endodontic system.
RESUMO
BACKGROUND: Plaque-induced gingivitis is a chronic inflammatory condition characterized by complete reversibility of tissue damage once the periodontal biofilm has been disorganised. The aim of this study was to evaluate the efficacy of two commercially available mouthwashes (MWs) versus a chlorhexidine (CHX) 0.12% MW in reducing gingival bleeding (GB) in adults with plaque-induced gingivitis. METHODS: The present study was a double-blind, parallel, randomized controlled trial involving 6492 gingival sites (i.e. 39 subjects × 28 teeth × 6 sites/tooth) aged 18-75 years. During a 2-week period, subjects were randomized to receive MWs: a control CHX 0.12% MW (group C, 1818 sites); a MW test containing CHX 0.09% + Citrox®/P complex (group CX, 2628 sites); a MW test based on natural compounds (group P, 2016 sites). GB was assessed at the inclusion visit (T0) and after 2 weeks of MW use (T1). Analyses of GB were compared between groups and then restricted to subjects with bleeding sites between 10 and 30% (moderate gingivitis) or ≥ 30% (severe gingivitis) at T0. Pairwise comparisons were made between groups and logistic regression was used to identify correlates of GB (T1). RESULTS: For total bleeding site analysis, GB reduction between T0 and T1 ranged from 23% (C), 26% (CX) and 36% (P), respectively (all p < 0.05). Multiple comparison between groups showed that group C was significantly less effective (p < 0.05) than groups CX and P. Splitting the analysis, in patients with severe gingivitis (≥ 30% bleeding sites at T0), all MWs had a positive effect on GB with a reduction at T1 of 36% (C), 33% (CX) and 42% (P), respectively. While GB reduction between T0 and T1, was significant for all groups, the comparison among groups showed no significant difference between group C and CX, whereas the improvement was significant for group P. On the other hand, in adults with moderate gingivitis (< 30% bleeding sites at T0), only CX and P had a positive effect on GB reduction at T1(9% in CX and 2% in P, respectively), although the differences between the three groups were not significant. CONCLUSION: The daily use of MWs with natural components (groups P and CX) for 2 weeks should be considered positively as an adjunct to individual oral prophylaxis to reduce GB compared to the control MW containing CHX 0.12% (group C) in healthy adults with plaque-induced gingivitis. For subjects with severe gingivitis, it is advisable to first use natural MW (P) and then MW based on CHX 0.09% with natural components (CX), compared to MW with CHX 0.12% (C). For adults with moderate gingivitis, P and CX can be advisable, even if no definitive recommendations can be drawn. TRIAL REGISTRATION: ACTRN12622000215729, 07/02/2022.
Assuntos
Anti-Infecciosos Locais , Placa Dentária , Gengivite , Adulto , Humanos , Antissépticos Bucais/uso terapêutico , Anti-Infecciosos Locais/uso terapêutico , Clorexidina/uso terapêutico , Gengivite/prevenção & controle , Gengivite/tratamento farmacológico , Placa Dentária/prevenção & controle , Placa Dentária/tratamento farmacológico , Hemorragia Gengival , Método Duplo-Cego , Índice de Placa DentáriaRESUMO
This study aimed to evaluate the loss of mineral content in the enamel surface in early artificial lesions and to assess the remineralizing potential of different agents by means of SEM coupled with energy-dispersive X-ray analysis (EDX). The analysis was performed on the enamel of 36 molars divided into six equal groups, in which the experimental ones (3-6) were treated using remineralizing agents for a 28-day pH cycling protocol as follows: Group 1, sound enamel; Group 2, artificially demineralized enamel; Group 3, CPP-ACP treatment; Group 4, Zn-hydroxyapatite treatment; Group 5, NaF 5% treatment; and Group 6, F-ACP treatment. Surface morphologies and alterations in Ca/P ratio were evaluated using SEM-EDX and data underwent statistical analysis (p < 0.05). Compared with the sound enamel of Group 1, the SEM images of Group 2 clearly showed loss of integrity, minerals, and interprismatic substances. Groups 3-6 showed a structural reorganization of enamel prisms, interestingly comprising almost the entire enamel surface. Group 2 revealed highly significant differences of Ca/P ratios compared with other groups, while Groups 3-6 showed no differences with Group 1. In conclusion, all tested materials demonstrated a biomimetic ability in remineralizing lesions after 28 days of treatment.
RESUMO
Currently, it remains unclear which specific peptides could be appropriate for applications in different fields of dentistry. The aim of this scoping review was to scan the contemporary scientific papers related to the types, uses and applications of peptides in dentistry at the moment. Literature database searches were performed in the following databases: PubMed/MEDLINE, Scopus, Web of Science, Embase, and Scielo. A total of 133 articles involving the use of peptides in dentistry-related applications were included. The studies involved experimental designs in animals, microorganisms, or cells; clinical trials were also identified within this review. Most of the applications of peptides included caries management, implant osseointegration, guided tissue regeneration, vital pulp therapy, antimicrobial activity, enamel remineralization, periodontal therapy, the surface modification of tooth implants, and the modification of other restorative materials such as dental adhesives and denture base resins. The in vitro and in vivo studies included in this review suggested that peptides may have beneficial effects for treating early carious lesions, promoting cell adhesion, enhancing the adhesion strength of dental implants, and in tissue engineering as healthy promotors of the periodontium and antimicrobial agents. The lack of clinical trials should be highlighted, leaving a wide space available for the investigation of peptides in dentistry.
RESUMO
Closing a diastema with a direct composite restoration still represents a real challenge for clinicians, mainly due to the need to create a correct contact point and emergence profile at the cervical level. The present article describes a novel anterior direct composite restoration technique for closing diastemata and changing tooth shape. The proposed technique, called the Front Wing Technique (FWT), does away with the use of the traditional wax-up and silicone index-based procedures. To date, there has been no effective way to transfer the anatomy modeled in the wax to the interproximal cervical area of anterior restorations every time these areas need to be corrected or restored. Therefore, the FWT provides a new approach to freehand model the emergence profile without gap formation. The cases in this article demonstrate the closure of maxillary and mandibular incisal diastemata, with the rationale behind each clinical step of the FWT described. This technique should be considered an alternative approach for the direct composite restoration of anterior teeth, saving chair time and cost.
Assuntos
Diastema , Dente , Humanos , Diastema/terapia , Restauração Dentária Permanente/métodos , Resinas Compostas , Estética DentáriaRESUMO
Purpose: This technical report aims to describe and detail the use of micro-computed tomography for a reliable evaluation of the bulk-fill composite/tooth interface. Materials and Methods: Bulk-fill composite restorations in tooth cavities were scanned using micro-computed tomography to obtain qualitatively and quantitatively valuable information. Two-dimensional information was processed using specific algorithms, and ultimately a 3-dimensional (3D) specimen reconstruction was generated. The 3D rendering allowed the visualization of voids inside bulk-fill composite materials and provided quantitative measurements. The 3D analysis software VG Studio MAX was used to perform image analysis and assess gap formation within the tooth-restoration interface. In particular, to evaluate internal adaptation, the Defect Analysis add-on module of VG Studio Max was used. Results: The data, obtained with the processing software, highlighted the presence and the shape of gaps in different colours, representing the volume of porosity within a chromatic scale in which each colour quantitatively represents a well-defined volume. Conclusion: Micro-computed tomography makes it possible to obtain several quantitative parameters, providing fundamental information on defect shape and complexity. However, this technique has the limit of not discriminating materials without radiopacity and with low or no filler content, such as dental adhesives, and hence, they are difficult to visualise through software reconstruction.
RESUMO
Dental remineralization represents the process of depositing calcium and phosphate ions into crystal voids in demineralized enamel, producing net mineral gain and preventing early enamel lesions progression. The aim of the present study was to qualitatively and quantitatively compare the remineralizing effectiveness of four commercially available agents on enamel artificial lesions using Scanning Electron Microscopy (SEM) combined with Energy Dispersive Spectroscopy (EDS) techniques. Thirty-six extracted third molars were collected and randomly assigned to six groups (n = 6), five of which were suspended in demineralizing solution for 72 h to create enamel artificial lesions, and one serving as control: G1, treated with a mousse of casein phosphopeptide and amorphous calcium−phosphate (CPP-ACP); G2, treated with a gel containing nano-hydroxyapatite; G3, treated with a 5% SF varnish; G4, treated with a toothpaste containing ACP functionalized with fluoride and carbonate-coated with citrate; G5, not-treated artificial enamel lesions; G6, not demineralized and not treated sound enamel. G1−G4 were subjected to pH cycling over a period of seven days. Analyses of the specimens' enamel surfaces morphology were performed by SEM and EDS. Data were statistically analyzed for multiple group comparison by one-way ANOVA/Tukey's test (p < 0.05). The results show that the Ca/P ratio of the G5 (2.00 ± 0.07) was statistically different (p < 0.05) from G1 (1.73 ± 0.05), G2 (1.76 ± 0.01), G3 (1.88 ± 0.06) and G6 (1.74 ± 0.04), while there were no differences (p > 0.05) between G1, G2 and G6 and between G4 (2.01 ± 0.06) and G5. We concluded that G1 and G2 showed better surface remineralization than G3 and G4, after 7 days of treatment.
RESUMO
Dental impressions are contaminated with potentially pathogenic microorganisms when they come into contact with patient blood, saliva, and plaque. Numerous disinfectants are used; however, no sole disinfectant can be designated as universal for all the impression materials. Thus, the aim of this study is to systemically review the literature to evaluate the effect of the existing disinfection procedures on the bacterial colonization of dental impression materials. This systematic review and meta-analysis was conducted according to the PRISMA statement. PubMed (MEDLINE), Web of Science, Scopus, EMBASE, and SciELO databases were screened up to April 2021. Eligibility criteria included in vitro studies reporting the antibacterial activity of disinfectant solutions in dental impression materials. The meta-analysis was performed using Review Manager (version 5.3.5). A global comparison was performed with the standardized mean difference based on random-effect models at a significance level of α = 0.05. A total of seven studies were included in the meta-analysis. The included studies described the effect of disinfection processes with chlorhexidine gluconate, alcohol, sodium hypochlorite, glutaraldehyde, and hydrogen peroxide in alginate, polyvinyl siloxane, and polyether impression materials. The meta-analyses showed that the use of chlorhexidine, alcohol, glutaraldehyde, and sodium hypochlorite reduced the colony-forming units by a milliliter (CFU/mL) in alginate (p < 0.001). On the other hand, glutaraldehyde, sodium hypochlorite, and alcohol reduced the CFU/mL in polyvinyl siloxane (p < 0.001). Finally, alcohol and glutaraldehyde reduced the CFU/mL in polyether material (p < 0.001). High heterogenicity was observed for the alginate and polyvinyl siloxane materials (I2 = 74%; I2 = 90%). Based on these in vitro studies, the disinfection of impression materials with several disinfection agents reduces the CFU/mL count.
RESUMO
BACKGROUND: COVID-19 disease first appeared in 2019 and quickly spread worldwide, causing a global pandemic. The oral cavity represents a target of SARS-CoV-2, and oral lesions are observed in both non-hospitalized and hospitalized patients. This systematic review aims to investigate the frequency of oral manifestations in COVID-19 hospitalized patients. METHODS: An electronic search was conducted in PubMed, Scopus, and Web of Science databases, including articles published up to September 2021. The review protocol was based on PRISMA-P. The risk of bias of the studies was assessed using the Joana Briggs Institute. The certainty of evidence was assessed using the GRADE instrument. RESULTS: Fifty-nine articles were included: 19 case reports, 17 case series, 2 case-control studies, 13 cross-sectional studies, 4 observational studies, and 4 retrospective studies. Oral ulcers, cheilitis, and tongue lesions were more common in patients before hospitalization, while perioral pressure ulcers, macroglossia, blisters, and oral candidiasis were more recurrent in patients during hospitalization. The first could be related directly to COVID-19, while the latter could be caused by medical devices, treatments, prone position, and immunological impairment. CONCLUSIONS: An accurate oral examination during the hospital admission of all confirmed COVID-19 cases is encouraged to recognize oral early manifestations and to apply appropriate treatments.
Assuntos
COVID-19 , Estudos Transversais , Humanos , Metanálise como Assunto , Estudos Retrospectivos , SARS-CoV-2RESUMO
OBJECTIVE: Evaluation of the behavior of three different bulk-filling techniques in terms of internal adaptation and external marginal sealing for restoring class II cavities. METHODS: Fifteen extracted sound molar teeth were used. Two standardized class II mesio/disto-occlusal (MO/DO) slot cavities, 4 mm long, 4 mm wide and 3 mm deep were prepared in each tooth, obtaining n=30 cavity preparations. The cavities were randomly assigned into three groups (n=10 per group) according to three bulk filling techniques: Bulk Traditional (BT), Bulk&Go (BG) and Bulk&Flow (BF). The teeth were analyzed by scanning electron microscopy (SEM) to investigate the external marginal seal. Thereafter, the chemical composition of tooth-restoration interface was analyzed by energy-dispersive X-ray spectroscopy (EDS). Complementary information to the SEM and EDS were obtained by micro-computed tomography (µCT) to assess the internal fit. RESULTS: SEM analysis showed a proper external marginal seal for all groups tested as confirmed by the EDS investigation, highlighting the presence of adhesive layer at the tooth-restoration interface. The internal marginal adaptation by means of µCT analysis revealed gaps formation at the tooth-restoration interface only for BT group, while an intimate contact free of gaps were found in the other two groups. Moreover, in BT and BF groups voids were present within the restoration. SIGNIFICANCE: BG and BF techniques can be considered as reliable alternatives to BT technique, as they simplify the class II restoration without transforming it into class I, thus ensuring a successful result.
Assuntos
Resinas Compostas , Restauração Dentária Permanente , Microscopia Eletrônica de Varredura , Microtomografia por Raio-XRESUMO
In the present study, the cytotoxic effects of 5-azacytidine on primary Oral Squamous Cell Carcinoma cells (OSCCs) from human biopsies, and on Cancer Stem Cells (CSCs) from the same samples, were investigated by an in vitro Fourier Transform InfraRed Microscospectroscopy (FTIRM) approach coupled with multivariate analysis. OSCC is an aggressive tumoral lesion of the epithelium, accounting for ~90% of all oral cancers. It is usually diagnosed in advanced stages, and this causes a poor prognosis with low success rates of surgical, as well as radiation and chemotherapy treatments. OSCC is frequently characterised by recurrence after chemotherapy and by the development of a refractoriness to some employed drugs, which is probably ascribable to the presence of CSCs niches, responsible for cancer growth, chemoresistance and metastasis. The spectral information from FTIRM was correlated with the outcomes of cytotoxicity tests and image-based cytometry, and specific spectral signatures attributable to 5-azacytidine treatment were identified, allowing us to hypothesise the demethylation of DNA and, hence, an increase in the transcriptional activity, together with a conformational transition of DNA, and a triggering of cell death by an apoptosis mechanism. Moreover, a different mechanism of action between OSSC and CSC cells was highlighted, probably due to possible differences between OSCCs and CSCs response.
Assuntos
Azacitidina/farmacologia , Carcinoma de Células Escamosas/metabolismo , Neoplasias Bucais/metabolismo , Carcinoma de Células Escamosas de Cabeça e Pescoço/metabolismo , Apoptose/efeitos dos fármacos , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Metilação de DNA/efeitos dos fármacos , Regulação Neoplásica da Expressão Gênica/efeitos dos fármacos , Humanos , Espectroscopia de Infravermelho com Transformada de Fourier , Células Tumorais CultivadasRESUMO
This study aimed to evaluate two hydrogen peroxide (HP)-based at-home bleaching systems in order to analyze whether nano-hydroxyapatite (nHA) addition may represent a reliable and safe solution for tooth whitening without altering dental microstructure and hardness. Human third molars (N = 15) were treated with two bleaching agents, one containing 6%HP (6HP) and the other 6% HP nHA-enriched (6HP-nHA) with average particle diameter ranging from 5-20 nm. Their effects on enamel were assessed using a spectrophotometer, Vickers microhardness (VMH) test and Scanning Electron Microscopy (SEM), comparing the treated groups with the non-treated control group (CTR). Color analysis revealed improvement in whiteness in both groups compared to CTR. VMH test results showed no differences among the groups. SEM analysis highlighted no evident changes in the enamel microstructure of tested groups compared to CTR. At high magnification, in 6HP group, a slight increase in irregularities of enamel surface morphology was observed, while 6HP-nHA group displayed removal of the aprismatic layer but preservation of the intact prismatic structure. These results suggest that the 6HP-nHA agent may be recommended to provide reliable whitening treatment, without damaging the enamel micromorphology and hardness.
RESUMO
This study aims to evaluate the effects of different finishing and polishing (F/P) systems on gloss and surface morphology of a new nanocomposite. Thirty discs of Filtek Universal Restorative material (3 M, ESPE) were prepared and divided into six groups (n = 5). Group A and B followed F/P protocols for anterior restorations, whereas Group C and D for posterior ones. Group E represented the control (covered by Mylar strip) and Group F represented the nanocomposite placement by means of clinical hand instruments; Groups E and F did not undergo F/P procedures. Among the polished groups, Group B showed the highest values (68.54 ± 7.54 GU), followed by Group A and D (46.87 ± 5.52 GU; 53.76 ± 2.65 GU). Finally, Group C (37.38 ± 4.93 GU) displayed the lowest results. Overall, Group E showed the highest gloss values (93.45 ± 8.27 GU), while Group F presented the lowest ones (1.74 ± 0.64 GU). Surface analysis revealed that Group A, C, and D displayed a smooth surface. Group B showed the lowest irregularities. Group E exhibited the most uniform superficial morphology. On the other hand, Group F displayed the most irregular one. In conclusion, using the tested material, only two protocols achieved appropriate gloss values. Then, clinicians might use the protocols of Group B and Group D, for anterior and posterior restorations, respectively.
Assuntos
Resinas Compostas , Nanocompostos , Polimento Dentário , Teste de Materiais , Propriedades de SuperfícieRESUMO
There is a continuing increase in demand for the direct restoration of posterior teeth with resin-based composites. However, the execution of these restorations, especially the reproduction of the anatomical details of the tooth, still presents difficulties for most clinicians. Nowadays, resin-based composite restorations have become increasingly popular due to the development of new materials and filling techniques. Direct composite restorations are usually performed using the time-consuming incremental filling technique, which minimizes polymerization shrinkage. With this technique, the composite is built up in individually cured increments. Due to the superior physical and chemical properties of the newer bulk-fill composites, it is possible to replace this incremental filling technique with a more time-efficient bulk-fill technique, whereby the composite is placed and modeled in a single layer up to the occlusal surface. This article presents this novel technique for direct posterior composite restorations. The technique, called Essential Lines, is simple, esthetic, and time saving. It combines the advantages of the bulk-fill technique with a modeling technique that utilizes minimal so-called diagram lines to restore the tooth anatomy. This procedure can be used by beginners and expert practitioners alike in various clinical situations to produce direct posterior composite restorations with optimal function and esthetics.
Assuntos
Resinas Compostas , Restauração Dentária Permanente , Materiais Dentários , Estética Dentária , Humanos , PolimerizaçãoRESUMO
Teeth are characterized by a specific chemical composition and microstructure, which are related to their nature, permanent and deciduous, and to the sides, lingual and vestibular. Deeper knowledge in this topic could be useful in clinical practice to develop new strategies in restorative dentistry and in the choice of materials with the best performances. In this study, Raman MicroSpectroscopy (RMS), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectrometry (EDS), and Vickers MicroHardness (VMH) were exploited to: (1) identify the microstructure and the chemical/elemental composition of permanent and deciduous human teeth, also characterizing their lingual and vestibular sides, and (2) validate a new multidisciplinary analytical approach, for obtaining multiple information on calcified tissues. All applied techniques evidenced differences between permanent and deciduous teeth both in the lingual and vestibular sides. In particular, scanning electron micrographs identified areas with an irregular appearance in the vestibular and lingual sides, which presented also different VMH values. Moreover, RMS and EDS displayed a different chemical/elemental composition in outer and inner enamel and dentin, in terms of Mineral/Matrix, Crystallinity, Carbonates/phosphates, and concentrations by weight (%) of calcium, phosphorous, carbon, magnesium, and sodium. A good linear correlation was found between RMS spectral profiles and EDS and VMH measurements, suggesting that RMS may be considered a useful and non-destructive diagnostic tool for obtaining multiple information on calcified tissues.
Assuntos
Fósforo , Dente Decíduo , Humanos , Microscopia Eletrônica de Varredura , Minerais , Espectrometria por Raios XRESUMO
BACKGROUND: Tooth whitening is one of the most requested dental treatments, but it still presents some side effects. Indeed, the bleaching agent can generate patients' discomfort and dental hard tissue damages, not achieving an efficient and long-lasting treatment with optimum whitening effect. To overcome these limitations, the bleaching agents containing nano-hydroxyapatite can represent a reliable solution to avoid these detrimental effects. METHODS: In this study, human third molars were treated with commercial bleaching agents, containing nano-hydroxyapatite (nHA) and 6% (at-home treatment), 12% and 18% (in-office treatments) of hydrogen peroxide (HP), named respectively G1, G2 and G3. The results were evaluated descriptively and analytically using Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray spectroscopy (EDS), comparing the treated groups with a commercial gel containing 10% carbamide peroxide (CONV) and with a non-treated control group (CTRL). RESULTS: ATR-FTIR analysis revealed a similar composition in carbonates and phosphates for CTRL, G1 and G2 groups, which showed no significant differences in their spectral profiles; an increased amount of organic matter was found in G3, while CONV displayed an intermediate behavior. SEM analysis did not highlight significant changes in the enamel microstructure of G1 and CONV when compared to CTRL; the pattern observed in G2 presented a slight increase of enamel irregularities, while G3 displayed a partial removal of the aprismatic layer and microporosities. No evident effects due to nHA were observed in the structure of the hydroxyapatite component of G1, G2 and CONV, if compared to CTRL, while G3 showed a slight loss of crystallinity. In all groups, EDS identified slight changes in the concentration of chemical elements O and Ca, while the Ca/P ratio was similar when compared to CTRL. CONCLUSION: The obtained results suggest that the application of the tested commercial bleaching agents, with a concentration of HP up to 12%, does not alter the morphological and chemical composition of the enamel surface and maintains its crystallinity.
RESUMO
This study aims to compare the degree of conversion of two different curing protocols used during adhesive cementation. The following resin luting agents were tested: Hri Flow (MF) and pre-heated Hri Micerium (MH); light-cure Nexus Third Generation (NX3L) and dual-cure Nexus Third Generation (NX3D); dual cured RelyX Ultimate (RXU) and light-cure RelyX Veneers (RXL). For each tested material, ten samples were prepared and divided into two groups which had different curing protocols (P1 and P2): in P1, samples were cured for 40 s; in P2, samples were cured for 5 s, and then, after 20 s, cured again for additional 40 s. The degree of conversion (DC) was evaluated both during the first 5 min of the curing phase and after 1, 2, 7, 14 and 28 days (p = 0.05). Different trends were observed in DC values after 5 min by comparing P1 and P2. In both P1 and P2, DC decreased as follows, MH > MF > NX3L > RXL > RXU > NX3D. There were significant differences of DC values among all resin luting agents (p < 0.05) in P1, while no significant differences existed between MH and MF, and NX3L and RXL in P2. At 1, 2, 7, 14 and 28 days the light curing luting agents had a higher DC than the dual luting agents (p < 0.05). P1 and P2 were not statistically different at each time point (p > 0.05). Both P1 and P2 protocols let achieve an acceptable DC after 28 days. The tested P2 can be safely used to lute indirect restorations, simplifying the removal of cement excesses.
Assuntos
Cimentação , Cimentos Dentários , Materiais Dentários , Teste de Materiais , Cimentos de ResinaRESUMO
BACKGROUND: Many desensitizing toothpastes exist commercially; however, few clinical trials have investigated their anti-inflammatory effects. This study aimed to evaluate the anti-inflammatory effect and patient appreciation of two toothpastes containing desensitizing agents: (1) a zinc-carbonate-hydroxyapatite nanoparticle (CHA) and (2) a calcium sodium phosphosilicate bioactive glass (CSPS). METHODS: CHA and CSPS were compared with an anti-inflammatory and antibacterial herbal based toothpaste (HB). The aims were accomplished by comparing the following outcomes: (1) the reduction in plaque and bleeding score (Full Mouth Plaque Score (FMPS) and Full Mouth Bleeding Score (FMBS), respectively); (2) the antibacterial activity (AbA) of the toothpaste by saliva samples; (3) the patient appreciation score (Visual Analogue Scale; VAS). Clinical parameters were assessed at baseline and 14 days post-treatment. RESULTS: The final sample consisted of 25 subjects, aged between 20 and 58 years. Although no differences in FMPS were reported (p > 0.05), both desensitizing toothpastes showed an improvement in FMBS. CSPS and HB recorded more AbA compared to CHA (p < 0.05). Moreover, HB resulted in a higher VAS score than both desensitizing toothpastes (p < 0.05). CONCLUSION: In conclusion, only CSPS displayed a similar anti-inflammatory effect compared to HB. Despite the low VAS score, CSPS could be considered as a valid and effective toothpaste in subjects with both dentin hypersensitivity and inflamed gums, highlighting its utility in clinical practice.
Assuntos
Dessensibilizantes Dentinários , Sensibilidade da Dentina , Cremes Dentais , Adulto , Sensibilidade da Dentina/tratamento farmacológico , Sensibilidade da Dentina/prevenção & controle , Método Duplo-Cego , Fluoretos , Humanos , Inflamação , Pessoa de Meia-Idade , Resultado do Tratamento , Adulto JovemRESUMO
This study aimed to compare two different bulk-filling techniques, evaluating the internal and external adaptation of class II resin-composite restorations, by analysing the gap formation using microcomputed tomography (µ-CT) and scanning electronic microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS). Two standardized mesio/disto-occlusal (MO/DO) cavities were prepared in eight extracted human third molars that were divided, according to the filling technique used, in the following two groups (n = 4): BG (Bulk&Go group) and BT (Bulk Traditional group). After universal bonding application, followed by the light curing, all teeth were restored using a bulk-fill composite. Specimens were scanned with µ-CT to evaluate 3D interfacial gaps. Acquired µ-CT data were analysed to quantify the gap formation. Complementary information to the µ-CT analysis were obtained by SEM. Thereafter, the chemical composition of tooth-restoration interface was analysed using EDS. The µ-CT analysis revealed gaps formation at the tooth-restoration interface for both the BG and BT groups, while within the restoration, only in the BT group there was evidence of microleakage formation. The scanning electron micrographs of both groups showed that the external marginal integrity of the restoration was preserved, while EDS showed the three different structures (tooth surface, adhesive layer and resin composite) of the tooth-restoration interface, highlighting the absence of gap formation. In both BG and BT, the two filling techniques did not show significant differences regarding the internal and external marginal adaptation of the restoration. To achieve a successful restoration, the clinician could be advised to restore a class II cavity using a single increment bulk-filling technique (BG), thus treating it as a class I cavity.