Laponite-Incorporated UiO-66-NH2-Polyethylene Oxide Composite Membranes for Protection against Chemical Warfare Agent Simulants.

A strategy is developed to enhance the barrier protection of polyethylene oxide (PEO)-metal-organic framework (MOF) composite films against chemical warfare agent simulants. To achieve enhanced protection, an impermeable high-aspect-ratio filler in the form of Laponite RD (LRD) clay platelets was incorporated into a composite PEO film containing MOF UiO-66-NH2. The inclusion of the platelets aids in mitigating permeation of inert hydrocarbons (octane) and toxic chemicals (2-chloroethyl ethyl sulfide, 2-CEES) of dimensions/chemistry similar to prominent vesicant threats while still maintaining high water vapor transport rates (WVTR). By utilizing small-angle neutron scattering, small-angle X-ray scattering, and wide-angle X-ray scattering, the LRD platelet alignment of the films was determined, and the structure of the films was correlated with performance as a barrier material. Performance of the membranes against toxic chemical threats was assessed using permeation testing of octane and 2-CEES, a common simulant for the vesicant mustard gas, and breathability of the membranes was assessed using WVTR measurements. To assess their robustness, chemical exposure (in situ diffuse reflectance infrared Fourier transform spectroscopy) and mechanical (tensile strength) measurements were also performed. It was demonstrated that the barrier performance of the film upon inclusion of the LRD platelets exceeds that of other MOF-polymer composites found in the literature and that this approach establishes a new path for improving permselective materials for chemical protection applications.

In Situ Nuclear Magnetic Resonance Investigation of Molecular Adsorption and Kinetics in Metal-Organic Framework UiO-66.

Thermodynamic and kinetic properties of molecular adsorption and transport in metal-organic frameworks (MOFs) are crucially important for many applications, including gas adsorption, filtration, and remediation of harmful chemicals. Using the in situ 1H nuclear magnetic resonance (NMR) isotherm technique, we measured macroscopic thermodynamic and kinetic properties such as isotherms and rates of mass transfer while simultaneously obtaining microscopic information revealed by adsorbed molecules via NMR. Upon investigating isopropyl alcohol adsorption in MOF UiO-66 by in situ NMR, we obtained separate isotherms for molecules adsorbed at distinct environments exhibiting distinct NMR characteristics. A mechanistic view of the adsorption process is obtained by correlating such resolved isotherms with the cage structure effect on the nucleus-independent chemical shift, molecular dynamics such as the crowding effect at high loading levels, and the loading level dependence of the mass transfer rate as measured by NMR and elucidated by classical Monte Carlo simulations.

Metal Hydroxide/Polymer Textiles for Decontamination of Toxic Organophosphates: An Extensive Study of Wettability, Catalytic Activity, and the Effects of Aggregation.

Electrospun nanofibers (NFs) incorporated with catalytically active components have gained significant interest in chemical protective clothing. This is because of the desirable properties of the NFs combined with decontamination capability of the active component. Here, a series of metal hydroxide catalysts Ti(OH)x, Zr(OH)4, and Ce(OH)4 were incorporated into three different polymer NF systems. These new polymer/metal hydroxide composite NFs were then evaluated for their catalytic activity against a nerve agent simulant. Two methods were utilized to incorporate the metal hydroxides into the NFs. Method one used direct incorporation of Ti(OH)x, Zr(OH)4, and Ce(OH)4 catalysts, whereas method two employed incorporation of Ti(OH)x via a precursor molecule. Composite NFs prepared via method one resulted in greatly improved reaction rates over the respective pure metal hydroxides due to reduced aggregation of catalysts, with polymer/Ce(OH)4 composite NFs having the fastest reaction rates out of method one materials. Interestingly, composite samples prepared by method two yielded the fastest reaction rates overall. This is because of the homogeneous distribution of the metal hydroxide catalyst throughout the NF. This homogeneous distribution created a hydroxyl-decorated NF surface with a greater number of exposed active sites for catalysis. The hydroxyl-decorated NF surface also resulted in an unexpected highly wettable composite NF, which also was found to contribute to the observed reaction rates. These results are not only promising for applications in chemical protective clothing but also show great potential for application in areas which need highly wettable membrane materials. This includes areas such as separators, antifouling membranes, and certain medical applications.

Solid-Phase Detoxification of Chemical Warfare Agents using Zirconium-Based Metal Organic Frameworks and the Moisture Effects: Analyze via Digestion.

Zirconium-based metal organic frameworks (Zr-MOFs) are highly chemically and thermally stable and have been of particular interest as reactive sorbents for chemical warfare agent (CWA) removal due to their fast and selective reactivity toward CWAs reported in buffer solutions. However, we find that decontamination of neat CWAs directly on Zr-MOFs, UiO-66, UiO-66-NH2, and NU-1000 is rather slow, and the reactivity trend and products generated are very different from those in solution. Furthermore, we show that their decontamination rates are affected by the amount of moisture present in the MOFs. Although the effects are minor for UiO-66-NH2 and NU-1000, the hydrolytic activity of UiO-66 toward CWAs dramatically improves as the amount of water present increases. Specifically, the initial hydrolysis rate of methyl paraoxon by UiO-66 increases from 6 µmol/d with 0 wt % water loading to 140 µmol/d with 400 wt % water loading. The results reported here suggest that decontamination of CWAs by Zr-MOFs in solid phase behaves very differently than solution decontamination. Additionally, we present for the first time a digestion method for analyzing and quantifying solid-phase decontamination, which is a daunting challenge itself due to the lack of a convenient analytical method.

Chemical Protective Textiles of UiO-66-Integrated PVDF Composite Fibers with Rapid Heterogeneous Decontamination of Toxic Organophosphates.

Metal-organic frameworks (MOFs) are a new and growing area of materials with high porosity and customizability. UiO-66, a zirconium-based MOF, has shown much interest to the military because of the ability of the MOF to catalytically decontaminate chemical warfare agents (CWAs). Unfortunately, the applications for MOFs are limited because of their powder form, which is difficult to incorporate into protective clothing. As a result, a new area of research has developed to functionalize fabrics with MOFs to make a wearable multifunctional fabric that retains the desired properties of the MOF. In this work, UiO-66 was incorporated into poly(vinylidene) fluoride/Ti(OH)4 composite fabric using electrospinning and evaluated for its use in chemical protective clothing. The base triethanolamine (TEA) was added to the composite fabric to create a self-buffering system that would allow for catalytic decontamination of CWAs without the need for a buffer solution. The fabrics were tested against the simulants methyl-paraoxon (dimethyl (4-nitrophenyl) phosphate, DMNP), diisopropyl fluorophosphate (DFP), and the nerve agent soman (GD). The results show that all of the samples have high moisture vapor transport and filtration efficiency, which are desirable for protective clothing. The incorporation of TEA decreased air permeation of the fabric, but increased the catalytic activity of the composite fabric against DMNP and DFP. Samples with and without TEA have rapid half-lives ( t1/2) as short as 35 min against GD agent. These new catalytically active self-buffering multifunctional fabrics have great potential for application in chemical protective clothings.

High-throughput screening of solid-state catalysts for nerve agent degradation.

A high-throughput screening (HTS) method was devised to increase the rate of discovery and evaluation of nerve agent degradation catalysts. Using this HTS method, >90 solid state materials, predominantly metal-organic frameworks (MOFs), were analyzed for their ability to hydrolyze the nerve agent simulant methyl paraoxon at two pH values (8.0 and 10.0).

Metal-Organic Framework Modified Glass Substrate for Analysis of Highly Volatile Chemical Warfare Agents by Paper Spray Mass Spectrometry.

Paper spray mass spectrometry has been shown to successfully analyze chemical warfare agent (CWA) simulants. However, due to the volatility differences between the simulants and real G-series (i.e., sarin, soman) CWAs, analysis from an untreated paper substrate proved difficult. To extend the analytical lifetime of these G-agents, metal-organic frameworks (MOFs) were successfully integrated onto the paper spray substrates to increase adsorption and desorption. In this study, several MOFs and nanoparticles were tested to extend the analytical lifetimes of sarin, soman, and cyclosarin on paper spray substrates. It was found that the addition of either UiO-66 or HKUST-1 to the paper substrate increased the analytical lifetime of the G-agents from less than 5 min detectability to at least 50 min.

Enhancing Van der Waals Interactions of Functionalized UiO-66 with Non-polar Adsorbates: The Unique Effect of para Hydroxyl Groups.

UiO-66 is a highly stable metal-organic framework (MOF) that has garnered interest for many adsorption applications. For small, nonpolar adsorbates, physisorption is dominated by weak Van der Waals interactions limiting the adsorption capacity. A common strategy to enhance the adsorption properties of isoreticular MOFs, such as UiO-66, is to add functional groups to the organic linker. Low and high pressure O2 isotherms were measured on UiO-66 MOFs functionalized with electron donating and withdrawing groups. It was found that the electron donating effects of -NH2 , -OH, and -OCF3 groups enhance the uptake of O2 . Interestingly, a significant enhancement in both the binding energy and adsorption capacity of O2 was observed for UiO-66-(OH)2 -p, which has two -OH groups para from one another. Density functional theory (DFT) simulations were used to calculate the binding energy of oxygen to each MOF, which trended with the adsorption capacity and agreed well with the heats of adsorption calculated from the Toth model fit to multi-temperature isotherms. DFT simulations also determined the highest energy binding site to be on top of the electron π-cloud of the aromatic ring of the ligand, with a direct trend of the binding energy with low pressure adsorption capacity. Uniquely, DFT found that oxygen molecules adsorbed to UiO-66-(OH)2 -p prefer to align parallel to the -OH groups on the aromatic ring. Similar effects for the electron donation of the functional groups were observed for the low pressure adsorption of N2 , CH4 , and CO2 .

Diffusion of CO2 in Large Crystals of Cu-BTC MOF.

Carbon dioxide adsorption in metal-organic frameworks has been widely studied for applications in carbon capture and sequestration. A critical component that has been largely overlooked is the measurement of diffusion rates. This paper describes a new reproducible procedure to synthesize millimeter-scale Cu-BTC single crystals using concentrated reactants and an acetic acid modulator. Microscopic images, X-ray diffraction patterns, Brunauer-Emmett-Teller surface areas, and thermogravimetric analysis results all confirm the high quality of these Cu-BTC single crystals. The large crystal size aids in the accurate measurement of micropore diffusion coefficients. Concentration-swing frequency response performed at varying gas-phase concentrations gives diffusion coefficients that show very little dependence on the loading up to pressures of 0.1 bar. The measured micropore diffusion coefficient for CO2 in Cu-BTC is 1.7 × 10(-9) m(2)/s.

Metal-organic frameworks for oxygen storage.

We present a systematic study of metal-organic frameworks (MOFs) for the storage of oxygen. The study starts with grand canonical Monte Carlo simulations on a suite of 10,000 MOFs for the adsorption of oxygen. From these data, the MOFs were down selected to the prime candidates of HKUST-1 (Cu-BTC) and NU-125, both with coordinatively unsaturated Cu sites. Oxygen isotherms up to 30 bar were measured at multiple temperatures to determine the isosteric heat of adsorption for oxygen on each MOF by fitting to a Toth isotherm model. High pressure (up to 140 bar) oxygen isotherms were measured for HKUST-1 and NU-125 to determine the working capacity of each MOF. Compared to the zeolite NaX and Norit activated carbon, NU-125 has an increased excess capacity for oxygen of 237% and 98%, respectively. These materials could ultimately prove useful for oxygen storage in medical, military, and aerospace applications.