RESUMO
Trazodone (TZD) is an antidepressant drug used to treat major depressive and sleeping disorders. Elevated doses of trazodone are associated with central nervous system depression, which manifests as nausea, drowsiness, confusion, vertigo, exhaustion, etc. To develop a clinically viable active pharmaceutical compound with minimal adverse effects, it is imperative to possess a comprehensive knowledge of the drug's action mechanism on DNA. Hence, we investigate the mode of interaction between trazodone and DNA utilizing various spectroscopic and computational techniques. Studies using UV-vis titration showed that the DNA and trazodone have an effective interaction. The magnitude of the Stern-Volmer constant (KSV) has been calculated to be 5.84 × 106 M-1 by the Lehrer equation from a steady-state fluorescence study. UV-vis absorption, DNA melting, dye displacement, and circular dichroism studies suggested that trazodone binds with DNA in minor grooves. Molecular docking and molecular dynamic simulation demonstrated that the TZD-DNA system was stable, and the mode of binding was minor groove. Furthermore, ionic strength investigation demonstrates that DNA and trazodone do not have a substantial electrostatic binding interaction.
Assuntos
Antidepressivos , DNA , Simulação de Acoplamento Molecular , Simulação de Dinâmica Molecular , Trazodona , Trazodona/química , DNA/química , DNA/metabolismo , Antidepressivos/química , Antidepressivos/farmacologia , Análise Espectral , Dicroísmo CircularRESUMO
Ionic liquids (ILs), often known as green designer solvents, have demonstrated immense application potential in numerous scientific and technological domains. ILs possess high boiling point and low volatility that make them suitable environmentally benign candidates for many potential applications. The more important aspect associated with ILs is that their physicochemical properties can be effectively changed for desired applications just by tuning the structure of the cationic and/or anionic part of ILs. Furthermore, these eco-friendly designer materials can function as electrolytes or solvents depending on the application. Owing to the distinctive properties such as low volatility, high thermal and electrochemical stability, and better ionic conductivity, ILs are nowadays immensely used in a variety of energy applications, particularly in the development of green and sustainable energy storage and conversion devices. Suitable ILs are designed for specific purposes to be used as electrolytes and/or solvents for fuel cells, lithium-ion batteries, supercapacitors (SCs), and solar cells. Herein, we have highlighted the utilization of ILs as unique green designer materials in Li-batteries, fuel cells, SCs, and solar cells. This review will enlighten the promising prospects of these unique, environmentally sustainable materials for next-generation green energy conversion and storage devices. Ionic liquids have much to offer in the field of energy sciences regarding fixing some of the world's most serious issues. However, most of the discoveries discussed in this review article are still at the laboratory research scale for further development. This review article will inspire researchers and readers about how ILs can be effectively applied in energy sectors for various applications as mentioned above.
Assuntos
Líquidos Iônicos , Líquidos Iônicos/química , Solventes/química , Eletrólitos/química , Íons , Temperatura de TransiçãoRESUMO
Modulation of pH is crucial to maintaining the chemical homeostasis of biological environments. The irregular metabolic pathways exhibited by cancer cells result in the production of acidic byproducts that are excreted and accumulate in the extracellular tumor microenvironment, reducing the pH. As a consequence of the lower pH in tumors, cancer cells increase the expression of metastatic phenotypes and chemotherapeutic resistance. A significant limitation in current cancer therapies is the inability to locally deliver chemotherapeutics, leading to significant damage to healthy cells in systemic administration. To overcome these challenges, we present an injectable chitosan-poly(ethylene glycol) hydrogel that is dual-loaded with doxorubicin and sodium bicarbonate providing alkaline buffering of extracellular acidity and simultaneous chemotherapeutic delivery to increase chemotherapeutic efficacy. We conducted in vitro studies of weak base chemotherapeutic and alkaline buffer release from the hydrogel. The release of doxorubicin from hydrogels increased in a low-pH environment and was dependent on the encapsulated sodium bicarbonate concentration. We investigated the influence of pH on the doxorubicin efficacy and viability of MCF-7 and MDA-MB-231 breast cancer cell lines. The results show a 2- to 3-fold increase in IC50 values from neutral pH to low pH, showing decreased cancer cell viability at neutral pH as compared to acidic pH. The IC50 results were shown to correlate with a decrease in intracellular uptake of doxorubicin at low pH. The proposed hydrogels were confirmed to be nontoxic to healthy MCF-10A mammary epithelial cells. Rheological studies were performed to verify that the dual-loaded hydrogels were injectable. The mechanical and release properties of the hydrogels were maintained after extended storage. The chemotherapeutic activity of doxorubicin was evaluated in the presence of the proposed pH-regulating hydrogels. The findings suggest a promising nontoxic, biodegradable hydrogel buffer delivery system that can achieve two simultaneous important goals of local acidosis neutralization and chemotherapeutic release.
RESUMO
In an attempt to develop reversible sensors based on ionic liquid/porous silicon (IL/pSi) platforms, we introduce an approach using task-specific, alkene-terminal ILs (AT-ILs) for direct grafting to the hydrogen-passivated as prepared-pSi (ap-pSi) surface via UV-hydrosilylation to address previous shortcomings associated with IL pattern impermanence (i.e., spread). By employing photoluminescence emission (PLE) and Fourier-transform infrared (FT-IR) imaging measurements, we demonstrate that the covalent grafting of AT-ILs onto the ap-pSi surface via photochemical hydrosilylation not only mitigates such feature spreading but also greatly improves PLE pattern stability. Significantly, we have discovered that, upon hydrosilylation, the resulting contact pin printed IL features remain stable to repeated challenges by toluene vapors, demonstrating the utility of AT-IL hydrosilylation for producing high-fidelity microarray features on pSi toward robust optical sensory microarrays.
RESUMO
Compounds possessing two fluorophoric moieties may exhibit dual fluorescence, one characterizing the monomeric fluorophore unit and the other characterizing the intramolecular aggregate. Fluorescence quenching of two dipyrenylalkanes, 1,3-bis(1-pyrenyl)propane [1Py(3)1Py] and 1,10-bis(1-pyrenyl)decane [1Py(10)1Py] having different alkyl chains separating the two termini pyrenyl groups that are capable of forming an intramolecular excimer, by an electron/charge-accepting quencher, nitromethane, is investigated in four different solvents-nonpolar (cyclohexane (CH)), polar-aprotic (acetonitrile (ACN)), polar-protic (ethanol (EtOH)), and chlorinated (dichloromethane (DCM))-under ambient conditions. For a given probe in a solvent, fluorescence from the monomer and the intramolecular excimer are quenched with similar efficiencies; the efficiency of quenching is higher for the probe with the longer alkyl chain separating the two fluorophores. Quenching efficiency is significantly higher in chlorinated solvent DCM. The bimolecular quenching rate constants for intramolecular excimer, however, are either comparable or lower for the longer alkyl chain compound. It is suggested that, while the donor electronic excited-state energetics is more favorable for the long alkyl chain compound, the approach of the quencher to the intramolecular excimer appears to be hindered by the presence of a longer alkyl chain.
RESUMO
The effects of ionic liquid addition on the spectroscopic properties of a pyrene-tryptophan-containing fluorescent intramolecular complex in polar-aprotic and polar-protic solvents, specifically, acetonitrile and ethanol, are assessed. Two ionic liquid sets, consisting of seven different ionic liquids, were explored; set 1 comprised three imidazolium-containing ionic liquids paired with different anions while set 2 consisted of varying cations, namely, imidazolium, pyrrolidinium, ammonium, and pyridinium, partnered with a common anion, bis(trifluoromethylsulfonyl)imide ([Tf2N-]). The results provided herein reveal that all ionic liquids explored behave as quenchers, however, the imidazolium-, pyrrolidinium-, and ammonium-containing ionic liquids selectively quenched the fluorescence from the exciplex while the monomer emission from pyrene was largely unaffected relative to exciplex emission. Conversely, the pyridinium ionic liquid, significantly quenched the fluorescence from both the pyrene monomer and the pyrene-tryptophan exciplex, as was expected. The observed quenching is demonstrated to originate from the cations of the ionic liquids and is, in general, more efficient for an imidazolium ionic liquid that contains an acidic proton in the C2 position. Stern-Volmer plots of the exciplex quenching demonstrate a complex quenching mechanism that does not appear to follow any conventional quenching models with the data best fit to an exponential equation. Furthermore, time-resolved fluorescence measurements reveal that the quenching is not dynamic in nature as the recovered decay times do not systematically decrease with increasing ionic liquid concentration, suggesting a possible static quenching mechanism. Thus, the formation of a "dark" ensemble is proposed, in which the ionic liquid cations complex with or crowd around the exciplex, quenching the intramolecular energy transfer.
RESUMO
We report herewith tryptophan (Trp)-conjugated peptidomimetics that show intramolecular through-space association between the Trp units. Our investigation revealed that the proximal placement of Trp can lead to the emergence of a new and unanticipated fluorescent entity constituting a Trp-Trp dimer. Proton-induced modulation of fluorescence is a consequence of this work. Investigations with control compounds unequivocally revealed that the fluorescence property is not originated from the localized excited state but from the unprecedented Trp-Trp intramolecular dimer in the ground state itself. The present findings will initiate the biophysical scientists to have a relook at the fluorescence properties of Trp-containing proteins.
Assuntos
Peptidomiméticos , Triptofano/química , Dipeptídeos/química , Espectrometria de FluorescênciaRESUMO
Breast cancer is most frequently diagnosed cancer and fifth leading cause of death in women. About 20-30% of all breast cancers overexpress HER2/neu receptors. Lapatinib is a dual tyrosin kinase inhibitor of EGFR and HER2. It exhibits its anticancer effect via blocking intracellular domain of HER2 receptor in breast cancer. Lapatinib belongs to class II of BSC classification due to its poor solubility restricting its clinical application. Due to presence of HER2 receptor on cardiomyocytes, it is associated with generation of cardiotoxicity. The present study was aimed to design a PEGylated liposomal formulation of Lapatinib and evaluate its anticancer potential. Lapatinib liposomes were prepared using lipid layer hydration method and its characterization was done by determining its particle size, zeta potential, entrapment efficiency and in vitro release profiling. The anti-tumor activity of PEGylated liposomal formulation was evaluated in xenografted tumor induced by MDA-MB-453 breast cancer cells in chick embryos. The anti-tumor effect of lapatinib was enhanced by its PEGylated liposomal preparation as it led to the reduction in tumor size to a greater extent compared to the embryos treated with free lapatinib. Flowcytometric analysis and immunoflurescence study using cleaved PARP antibody demonstrated the enhanced apoptotic potential of PEGylated liposomes of lapatinib. SGOT levels, marker for cardiotoxicity and hepatotoxicity, significantly decreased in serum of embryos treated with PEGylated liposomes of lapatinib compared to free drug treated embryos. Hence, the PEGylated liposomal formulation of lapatinib can be used as a therapeutic strategy against HER2 positive breast cancer either alone or in combination with conventional anticancer agents and hormonal therapies.
Assuntos
Antineoplásicos/administração & dosagem , Neoplasias da Mama/tratamento farmacológico , Lapatinib/administração & dosagem , Inibidores de Proteínas Quinases/administração & dosagem , Receptor ErbB-2/antagonistas & inibidores , Animais , Antineoplásicos/farmacologia , Antineoplásicos/uso terapêutico , Antineoplásicos/toxicidade , Apoptose/efeitos dos fármacos , Neoplasias da Mama/metabolismo , Neoplasias da Mama/patologia , Cardiotoxicidade/etiologia , Cardiotoxicidade/prevenção & controle , Linhagem Celular Tumoral , Proliferação de Células/efeitos dos fármacos , Embrião de Galinha , Receptores ErbB/antagonistas & inibidores , Receptores ErbB/metabolismo , Feminino , Humanos , Lapatinib/farmacologia , Lapatinib/uso terapêutico , Lapatinib/toxicidade , Lipossomos/química , Polietilenoglicóis/química , Inibidores de Proteínas Quinases/farmacologia , Inibidores de Proteínas Quinases/uso terapêutico , Inibidores de Proteínas Quinases/toxicidade , Receptor ErbB-2/metabolismoRESUMO
To develop ionic liquid/porous silicon (IL/pSi) microarrays we have contact pin-printed 20 hydrophobic and hydrophilic ionic liquids onto as-prepared, hydrogen-passivated porous silicon (ap-pSi) and then determined the individual IL spot size, shape and associated pSi surface chemistry. The results reveal that the hydrophobic ionic liquids oxidize the ap-pSi slightly. In contrast, the hydrophilic ionic liquids lead to heavily oxidized pSi (i.e., ox-pSi). The strong oxidation arises from residual water within the hydrophilic ILs that is delivered from these ILs into the ap-pSi matrix causing oxidation. This phenomenon is less of an issue in the hydrophobic ILs because their water solubility is substantially lower.
RESUMO
The growing commercial applications had brought aluminium oxide nanoparticles under toxicologists' purview. In the present study, the cytotoxicity of two different sized aluminium oxide nanoparticles (ANP(1), mean hydrodynamic diameter 82.6±22nm and ANP(2), mean hydrodynamic diameter 246.9±39nm) towards freshwater algal isolate Chlorella ellipsoids at low exposure levels (≤1µg/mL) using sterile lake water as the test medium was assessed. The dissolution of alumina nanoparticles and consequent contribution towards toxicity remained largely unexplored owing to its presumed insoluble nature. Herein, the leached Al(3+) ion mediated toxicity has been studied along with direct particulate toxicity to bring out the dynamics of toxicity through colloidal stability, biochemical, spectroscopic and microscopic analyses. The mean hydrodynamic diameter increased with time both for ANP(1) [82.6±22nm (0h) to 246.3±59nm (24h), to 1204±140nm (72h)] and ANP(2) [246.9±39nm (0h) to 368.28±48nm (24h), to 1225.96±186nm (72h)] signifying decreased relative abundance of submicron sized particles (<1000nm). The detailed cytotoxicity assays showed a significant reduction in the viability dependent on dose and exposure. A significant increase in ROS and LDH levels were noted for both ANPs at 1µg/mL concentration. The zeta potential and FT-IR analyses suggested surface chemical interaction between nanoparticles and algal cells. The substantial morphological changes and cell wall damage were confirmed through microscopic analyses (SEM, TEM, and CLSM). At 72h, significant Al(3+) ion release in the test medium [0.092µg/mL for ANP(1), and 0.19µg/mL for ANP(2)] was noted, and the resulting suspension containing leached ions caused significant cytotoxicity, revealing a substantial ionic contribution. This study indicates that both the nano-size and ionic dissolution play a significant role in the cytotoxicity of ANPs towards freshwater algae, and the exposure period largely determines the prevalent mode of nano-toxicity.
Assuntos
Óxido de Alumínio/toxicidade , Chlorella/efeitos dos fármacos , Nanopartículas Metálicas/toxicidade , Poluentes Químicos da Água/toxicidade , Relação Dose-Resposta a Droga , Tamanho da Partícula , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
The fascinating and attractive features of ionic liquids (ILs) can be considerably expanded by mixing with suitable cosolvents, opening their versatility beyond the pure materials. We show here that mixtures of the IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) and 2,2,2-trifluoroethanol (TFE) display the intriguing phenomenon of hyperpolarity, examples of which are notably sparse in the literature. From the perspective of the E(T)(N) polarity scale and Kamlet-Taft parameters for hydrogen bond acidity (α) and basicity (ß), the polarity of this mixture exceeds that of either neat component. Fluorescent molecular probes capable of engaging in hydrogen bonds (e.g., 2-(p-toluidino)naphthalene-6-sulfonate, TNS; 6-propionyl-2-(dimethylamino)naphthalene, PRODAN) also exhibit this curious behavior. The choice of IL anion appears to be essential as hyperpolarity is not observed for mixtures of TFE with ILs containing anions other than hexafluorophosphate. The complex solute-solvent and solvent-solvent interactions present in the [bmim][PF6] + TFE mixture were further elucidated using infrared absorbance, dynamic viscometry, and density measurements. These results are discussed in terms of Coulombic interactions, disruption of TFE multimers, formation of hyperanion preference aggregates, and "free" [bmim]âº. It is our intent that these results open the door for computational exploration of related solvent mixtures while inspiring practical questions, such as whether such systems might offer the potential for stabilization of highly charged transition states or ionic clusters during (nano)synthesis.
RESUMO
Mixtures of ionic liquid (IL) with poly(ethylene glycol) (PEG) may afford media with favorable properties. Dynamic viscosities of mixtures of a common and popular IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) with PEGs of average molecular weight (MW) 200 (PEG200), average MW 400 (PEG400), number-average MW M(n) 570-630 (PEG600), and number-average MW M(n) 950-1050 (PEG1000) over a complete composition range at 10° intervals in the temperature range of 10-90 °C are measured. The temperature dependence of the dynamic viscosity shows ([bmim][PF(6)] + PEG) mixtures to behave as Newtonian fluids and is found to follow Arrhenius-type behavior. In the IL-rich region, excess logarithmic viscosities for the ([bmim][PF(6)] + PEG200) mixture are found to be negative and independent of the temperature. Mixtures of ([bmim][PF(6)] + PEG600) and ([bmim][PF(6)] + PEG1000) show rare and unusual viscosity "synergism" or "hyperviscosity" in the sense that the mixture viscosity is observed to be significantly higher than the viscosity of both the neat components forming the mixture, giving rise to large positive excess logarithmic viscosities. These positive excess logarithmic viscosities decrease with increasing temperature. Formation of extensive H-bonding between the IL and PEG more than compensates for the losses in Coulombic attractive and van der Waals interactions within [bmim][PF(6)] and PEG600/PEG1000, respectively, giving rise to viscosity synergism. This compensation is not enough for ([bmim][PF(6)] + PEG200) and ([bmim][PF(6)] + PEG400) mixtures. The evidence for H-bonding in the mixtures is provided by FTIR absorbance data. The product of the monomer-to-excimer emission intensity ratio and the lifetime of the intramolecular excimer fluorescence of a microfluidity probe, 1,3-bis(1-pyrenyl)propane (BPP), is used as a reflection of the microviscosity of the mixture at different temperatures. The microviscosity shows synergistic effects in all four ([bmim][PF(6)] + PEG) mixtures. The contribution of H-bonding to the microviscosity reported by BPP is observed to be more then that as compared to contributions of Coulombic and van der Waals interactions. Synergism in the dynamic viscosity and microviscosity of ([bmim][PF(6)] + PEG) mixtures is a complex interplay of inter- and intramolecular H-bonding as well as Coulombic and van der Waals type interactions.
RESUMO
Spectroscopic responses of absorbance probes, betaine dye 33, N,N-diethyl-4-nitroaniline, and 4-nitroaniline, and fluorescence dipolarity probes, pyrene (Py) and pyrene-1-carboxaldehyde (PyCHO) within ionic liquids (ILs) 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), and aqueous mixtures of [bmim][BF4] are used to assess the changes in important physicochemical properties with temperature in the range 10-90 degrees C. ETN obtained from betaine dye 33, indicating dipolarity/polarizability and/or hydrogen bond donating (HBD) acidity, decreases linearly with increasing temperature within the two ILs. Changes in Kamlet-Taft parameters dipolarity/polarizability (pi*), HBD acidity (alpha), and HB accepting (HBA) basicity (beta) with temperature show interesting trends. While pi* and alpha decrease linearly with increasing temperature within the two ILs, beta appears to be independent of the temperature. Similar to ETNand pi*, the first-to-third band intensity ratio of probe Py also decreases linearly with increasing temperature within the ILs. The lowest energy fluorescence maxima of PyCHO, though it decreases significantly within water as the temperature is increased from 10 to 90 degrees C, it does not change within the two ILs investigated. The temperature dependence of the dipolarity/polarizability as manifested via betaine dye 33 behavior is found to be more within the aqueous mixtures of [bmim][BF4] as compared to that within neat [bmim][BF4] or neat water. The sensitivity of pi* toward temperature increases as IL is added to water and that of alpha decreases. The temperature dependent Py behavior shows no clear-cut trend within aqueous mixtures of [bmim][BF4]; insensitivity of the PyCHO response toward temperature change is reasserted within aqueous IL mixtures. All-in-all, the temperature-dependent behavior of solvatochromic probes within [bmim][PF6], [bmim][BF4], and aqueous mixtures of [bmim][BF4] is found to depend on the identity of the probe.
RESUMO
Poly(ethylene glycols) (PEGs) and room-temperature ionic liquids (ILs) are both projected as possible alternatives to volatile organic compounds (VOCs). Their potential usage in chemical applications, however, is often hampered by their limited and, in some cases, undesired individual physicochemical properties. Properties of mixtures of PEG with a common IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) are assessed via responses of three fluorescence probes: pyrene (Py) and pyrene-1-carboxaldehyde (PyCHO) are the dipolarity sensing probes and 1,3-bis-(1-pyrenyl) propane (BPP) is the probe for microfluidity. All three probes demonstrate anomalous fluorescence behavior within the mixture of [bmim][PF6] with four different PEGs of average molecular weight (MW) 200, 400, 600, and 1500 g.mol(-1), respectively, across complete composition range. Cybotactic region dipolarity of the probe Py within the mixtures is observed to be higher than that expected from ideal additive behavior. PyCHO lowest energy fluorescence maxima implying the static dielectric constant around the cybotactic region shows values within the mixtures to be even higher than that in neat PEG, the component having higher static dielectric constant of the two, clearly indicating the milieu to have anomalously high dipolarity. "Hyperpolarity" inherent to the PEG+[bmim][PF6] mixture is confirmed. Intramolecular excimer-to-monomer fluorescence intensity ratio of BPP indicates the microfluidity within the mixture to be even lower than that within neat [bmim][PF6], the component with lowest microfluidity. Presence of strong solvent-solvent interactions within the mixture is proposed to be the major reason for the anomalous fluorescence probe responses. Specifically, extensive hydrogen-bonded network involving termini hydroxyls of PEGs and PF6- as well as ethoxy/hydroxyl oxygens of PEGs and the C2-H of bmim+ is proposed to be responsible for the unusual outcomes. Fluorescence probe responses are shown to be adequately predicted by a four-parameter simplified combined nearly ideal binary solvent/Redlich-Kister (CNIBS/R-K) model. Unusually altered physicochemical properties are demonstrated to be the key feature of the "hybrid green" PEG+IL systems.
Assuntos
Corantes Fluorescentes/química , Imidazóis/química , Líquidos Iônicos/química , Polietilenoglicóis/química , Solventes/química , Fenômenos Químicos , Modelos Químicos , Espectrometria de FluorescênciaRESUMO
A hybrid, potentially green solvent system composed of tetraethylene glycol (TEG) and the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) was investigated across all mole fractions with regard to the solvent properties of the mixture. For this purpose, a suite of absorbance- and fluorescence-based solvatochromic probes were utilized to explore solute-solvent and solvent-solvent interactions existing within the [bmim][PF(6)] + TEG system. These studies revealed an interesting and unusual synergistic solvent effect. In particular, a remarkable "hyperpolarity" was observed in which the E(T) value, comprising dipolarity/polarizability and hydrogen bond donor (HBD) acidity contributions, at intermediate mole fractions of the binary mixture well exceeded that of the most polar pure component (i.e., [bmim][PF(6)]). Independently determined dipolarity/polarizability (pi*) and HBD acidity (alpha) Kamlet-Taft values for the [bmim][PF(6)] + TEG mixtures were also observed to be anomalously high at intermediate mole fractions, whereas hydrogen bond acceptor (HBA) basicities (beta values) were much more in line with the ideal arithmetic values predicted on a mole fraction basis. Two well-established fluorescent polarity probes (pyrene and pyrene-1-carboxaldehyde) further illustrated notable hyperpolarity within [bmim][PF(6)] + TEG mixtures. Moreover, the steady-state fluorescence anisotropy of the molecular rotor rhodamine 6G and the excimer-to-monomer fluorescence ratio exhibited by the fluidity probe 1,3-bis-(1-pyrenyl)propane demonstrated that solute rotation and microfluidity within the [bmim][PF(6)] + TEG mixture were significantly reduced compared with expectations based on simple solvent mixing. A solvent ordering via formation of HBD/HBA complexes involving the C-2 proton of the [bmim(+)] cation and oxygen atoms of TEG, as well as interactions between [PF(6)(-)] and the terminal hydroxyl groups of TEG, is proposed to account for the observed behavior. Further spectroscopic evidence of strong intersolvent interactions occurring within the [bmim][PF(6)] + TEG mixture was provided, inter alia, by substantial frequency shifts in the [PF(6)(-)] asymmetric stretching mode observed in the infrared spectra as TEG was incrementally added to [bmim][PF(6)]. Overall, our observations contribute to a growing literature advocating the notion that ionic liquids and certain organic solvents form ordered, nanostructured, or microsegregated phases upon mixing.
RESUMO
Hybrid "green" solvent systems composed of room-temperature ionic liquids (ILs) and poly(ethylene glycols) (PEGs) may have enormous future potential. Solvatochromic absorbance probe behavior is used to assess the physicochemical properties of the mixture composed of IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) and PEG (average molecular weights of 200, 400, 600, and 1500) at ambient conditions. Lowest energy intramolecular charge-transfer absorbance maxima of a betaine dye, i.e., E(T)(N), indicates the dipolarity/polarizability and/or hydrogen-bond donating (HBD) acidity of the [bmim][PF 6] + PEG mixtures to be even higher than that of neat [bmim][PF(6)], the solution component with higher dipolarity/polarizability and/or HBD acidity. Dipolarity/polarizability (pi*) obtained separately from the electronic absorbance response of probe N, N-diethyl-4-nitroaniline shows a trend similar to E(T)(N ) thus confirming the unusually high dipolarity/polarizability of the [bmim][PF(6)] + PEG mixtures. Similar to E(T)(N ) and pi*, the HBD acidity (alpha) of [bmim][PF(6)] + PEG mixtures is also observed to be anomalously high. Contrary to what is observed for E(T)(N ), pi*, and alpha, the hydrogen-bond accepting (HBA) basicity (beta) of the [bmim][PF(6)] + PEG mixtures is observed to be lower than that predicted from ideal additive behavior indicating diminished HBA basicity of the mixture as compared to its neat components. A four-parameter simplified combined nearly ideal binary solvent/Redlich-Kister (CNIBS/R-K) equation is shown to satisfactorily predict the solvatochromic parameters within [bmim][PF(6)] + PEG mixtures. It is demonstrated that [bmim][PF(6)] + PEG mixtures possess physicochemical properties that are superior to those of either the neat IL or the neat PEG.