Tungsten-based nanocatalysts with different structures for visible light responsive photocatalytic degradation of bisphenol A.

Environmental pollution, such as water contamination, is a critical issue that must be absolutely addressed. Here, three different morphologies of tungsten-based photocatalysts (WO3 nanorods, WO3/WS2 nanobricks, WO3/WS2 nanorods) are made using a simple hydrothermal method by changing the solvents (H2O, DMF, aqueous HCl solution). The as-prepared nanocatalysts have excellent thermal stability, large porosity, and high hydrophilicity. The results show all materials have good photocatalytic activity in aqueous media, with WO3/WS2 nanorods (NRs) having the best activity in the photodegradation of bisphenol A (BPA) under visible-light irradiation. This may originate from increased migration of charge carriers and effective prevention of electron‒hole recombination in WO3/WS2 NRs, whereby this photocatalyst is able to generate more reactive •OH and •O2- species, leading to greater photocatalytic activity. About 99.6% of BPA is photodegraded within 60 min when using 1.5 g/L WO3/WS2 NRs and 5.0 mg/L BPA at pH 7.0. Additionally, the optimal conditions (pH, catalyst dosage, initial BPA concentration) for WO3/WS2 NRs are also elaborately investigated. These rod-like heterostructures are expressed as potential catalysts with excellent photostability, efficient reusability, and highly active effectivity in different types of water. In particular, the removal efficiency of BPA by WO3/WS2 NRs reduces by only 1.5% after five recycling runs and even reaches 89.1% in contaminated lake water. This study provides promising insights for the nearly complete removal of BPA from wastewater or different water resources, which is advantageous to various applications in environmental remediation.

Anisotropic properties of two-dimensional (2D) tin dihalide (SnX2, X = Cl, Br, I) monolayer binary materials.

This paper investigated the electronic properties and photoresponse of two-dimensional SnX2(X = Cl, Br, I) monolayer binary materials using computational techniques. The calculated band structure and density of states indicate that these are large band gap semiconducting materials with an indirect band gap. The studied chemical bonding mechanism shows the existence of the hybrid bonding of ionic and covalent bonds in these dihalide materials. The valence band (VB) and conduction band (CB) edge positions are also estimated, using the concept of electronegativity and band gap, to investigate the photocatalytic activity of SnX2. Next, we investigated the polarization and energy-dependent dielectric and optical functions along the crystallographic axes of these materials in the linear response approach of the perturbing incident oscillating light field. These materials exhibit an anisotropic behavior of these functions, especially in the high-energy visible and low-energy ultraviolet (UV) regions. The absorption of incident light photons is very fast in SnI2than SnBr2and SnCl2in the low-energy UV region. It demonstrates the higher absorption coefficient and optical conductivity in Snl2. The obtained average static refractive index of SnCl2is comparable to that of glass (1.5), showing its application as transparent material. The low reflection coefficient, less than 20%, makes them superior for antireflection coating materials in the infrared and visible regions. The prominent energy loss peaks show the existence of plasmon resonances in these materials. The most of losses occur in the UV region. The investigated electronic and photoresponse properties indicate that these Sn-based dihalide materials are excellent for electronic devices and optoelectronic applications. Also, the calculated VB and CB edge positions with respect to the normal hydrogen electrode show the favorable water-splitting capability of these materials.

Refractive Index-Adaptive Nanoporous Chiral Photonic Crystal Film for Chemical Detection Visualized via Selective Reflection.

Photonic crystals (PC) are of great importance in technology, especially in optics and photonics. In general, the structural color of PCs responds to external stimuli primarily by changing their periodicity. Herein, the authors report on refractive index (RI) adaptive PCs. Cross-linked cholesteric films with interconnected nanopores exhibit a very low RI without light scattering. Transparent PC films with maximum reflectance in the ultravoilet (UV) region respond to various chemicals by changing the reflective color of the PC. The authors demonstrate its unique colorimetric chemical detections of hazardous organic liquids. Loading various chemicals into nanopores significantly shifts the structural color into the visible range depending on the chemical's RI. These results are unique in that the structural color of photonic films is mediated by RI changes rather than periodicity changes. In principle, nanoporous photonic crystal films can detect the RI of a chemical substance by its unique color. In contrast to volumetric changes, this sensing mechanism offers several advantages, including durability, excellent sensitivity, fast response time, and wide detection range. These results provide useful insight into stimulus-responsive PCs. The structural color of PC films can be effectively tuned by adjusting average RIs instead of changing periodicity.

Correction: Highly efficient degradation of reactive black KN-B dye by ultraviolet light responsive ZIF-8 photocatalysts with different morphologies.

[This corrects the article DOI: 10.1039/D2RA08312D.].

Highly efficient degradation of reactive black KN-B dye by ultraviolet light responsive ZIF-8 photocatalysts with different morphologies.

Zeolitic imidazolate framework ZIF-8, a type of metal-organic framework, has diverse applications in multiple catalytic fields due to its outstanding properties. Herein, ZIF-8 photocatalysts with three different morphologies (dodecahedral, pitaya-like, and leaf-like) are successfully synthesized under ambient conditions from zinc salts by altering the volume ratio of methanol and water used as a solvent. The as-synthesized ZIFs have high crystallinity with distinct BET surface areas. The experiments indicate that the ZIFs have high photocatalytic efficiency, in which the leaf-like structure (ZIF-8-F3) is the most efficient in the degradation of reactive black KN-B dye (RB5) under 365 nm UV irradiation. This is due to the efficient inhibition of electron-hole recombination or the higher migration of charge carriers in ZIF-8-F3, thus producing more reactive oxygen species, resulting in greater photocatalytic efficiency. At pH = 11, more than 95% of RB5 is degraded within 2 hours when using 1.0 g L-1 of ZIF-8-F3. Besides, the photocatalytic and kinetic performances of ZIF-8-F3 are also investigated by optimizing the pH, initial RB5 concentration, and dosage of the used catalyst. These ZIF-8-F3 plates have been shown to be a promising material with high photostability and effective reusability, beneficial to various potential applications in environmental remediation issues.

Recent advances in ZnO nanostructure as a gas-sensing element for an acetone sensor: a short review.

Air pollution is a severe concern globally as it disturbs the health conditions of living beings and the environment because of the discharge of acetone molecules. Metal oxide semiconductor (MOS) nanomaterials are crucial for developing efficient sensors because of their outstanding chemical and physical properties, empowering the inclusive developments in gas sensor productivity. This review presents the ZnO nanostructure state of the art and notable growth, and their structural, morphological, electronic, optical, and acetone-sensing properties. The key parameters, such as response, gas detection limit, sensitivity, reproducibility, response and recovery time, selectivity, and stability of the acetone sensor, have been discussed. Furthermore, gas-sensing mechanism models based on MOS for acetone sensing are reported and discussed. Finally, future possibilities and challenges for MOS (ZnO)-based gas sensors for acetone detection have also been explored.

WS2 Nanorod as a Remarkable Acetone Sensor for Monitoring Work/Public Places.

Here, we report the synthesis of the WS2 nanorods (NRs) using an eco-friendly and facile hydrothermal method for an acetone-sensing application. This study explores the acetone gas-sensing characteristics of the WS2 nanorod sensor for 5, 10, and 15 ppm concentrations at 25 °C, 50 °C, 75 °C, and 100 °C. The WS2 nanorod sensor shows the highest sensitivity of 94.5% at 100 °C for the 15 ppm acetone concentration. The WS2 nanorod sensor also reveals the outstanding selectivity of acetone compared to other gases, such as ammonia, ethanol, acetaldehyde, methanol, and xylene at 100 °C with a 15 ppm concentration. The estimated selectivity coefficient indicates that the selectivity of the WS2 nanorod acetone sensor is 7.1, 4.5, 3.7, 2.9, and 2.0 times higher than xylene, acetaldehyde, ammonia, methanol, and ethanol, respectively. In addition, the WS2 nanorod sensor also divulges remarkable stability of 98.5% during the 20 days of study. Therefore, it is concluded that the WS2 nanorod can be an excellent nanomaterial for developing acetone sensors for monitoring work/public places.

Electrically Switchable Anisometric Carbon Quantum Dots Exhibiting Linearly Polarized Photoluminescence: Syntheses, Anisotropic Properties, and Facile Control of Uniaxial Orientation.

Carbon quantum dots (CQDs) have been extensively explored in diverse fields because of their exceptional features. The nanometric particles with photoluminescence (PL) benefit various optical and photonic applications. However, the majority of previous reports have mainly focused on either unpolarized or circular-polarized (CP) PL. Linearly polarized (LP) emission of CQDs is limited mainly because of their isometric shape and difficulties in macroscopic orientation control. Herein, we report syntheses of anisometric CQDs and facile control of the uniaxial orientation on a macroscopic scale, which results in linearly polarized photoluminescence (LP-PL). The anisometric CQDs are synthesized from rigid-rod-shaped precursors and evenly dispersed in the rod-like liquid crystal (LC) host. As-synthesized CQDs exhibit a PL quantum yield as high as 35% in chloroform. In addition to uniform alignment, facile directional switching of the elongated CQD is established by employing the electrical responsiveness of the CQD and host LC. Therefore, the dichroic photophysical properties of anisometric CQDs have been beneficially adopted for fabrications of polarization-sensitive and electrically switchable PL devices. Also, anisometric CQDs are embedded in polymer films with molecular orientational patterns and clearly recognized by LP-PL.