Alkaline-Responsive, Self-Healable, and Conductive Copolymer Composites with Enhanced Mechanical Properties Tailored for Wearable Tech.

Despite significant advancements, current self-healing materials often suffer from a compromise between mechanical robustness and functional performance, particularly in terms of conductivity and responsiveness to environmental stimuli. Addressing this issue, the research introduces a self-healable and conductive copolymer, poly(ionic liquid-co-acrylic acid) (PIL-co-PAA), synthesized through free radical polymerization, and further optimized by incorporating thermoplastic polyurethane (TPU). This combination leverages the unique properties of each component, especially ion-dipole interactions and hydrogen bonds, resulting in a material that exhibits exceptional self-healing abilities and demonstrates enhanced mechanical properties and electrical conductivity. Moreover, the PIL-co-PAA/TPU films showcase alkaline-responsive behavior, a feature that broadens their applicability in dynamic environments. Through systematic characterization, including thermogravimetric analysis, tensile testing, and electrical properties measurements, the mechanisms behind the improved performance and functionality of these films are elucidated. The conductivities and ultimate tensile strength (σuts) of the PIL-co-PAA/TPU films regain 80% under 8 h healing process. To extend the applications for wearable devices, the self-healing properties of commercial cotton fabrics coated with the self-healable PIL-co-PAA are also investigated, demonstrating both self-healing and electrical properties. This study advances the understanding of self-healable conductive polymers and opens new avenues for their application in wearable technology.

Comparing efficacy of charged-particle therapy with brachytherapy in treatment of uveal melanoma.

BACKGROUND: Uveal melanoma (UM) is the most common primary ocular tumour in adults. The most used eye-preserving treatments are charged-particle therapy (CPT) and brachytherapy. We performed a systematic review and meta-analysis to compare efficacies and complications of these two radiotherapies. METHODS: We searched EMBASE, PubMed, MEDLINE, and the Cochrane Library from January 2012 to December 2022. Two independent reviewers identified controlled studies comparing outcomes of CPT versus brachytherapy. Case series that utilize either treatment modality were also reviewed. RESULTS: One hundred fifty studies met the eligibility criteria, including 2 randomized control trials, 5 controlled cohort studies, and 143 case series studies. We found significant reduction in local recurrence rate among patients treated with CPT compared to brachytherapy (Odds ratio[OR] 0.38, 95% Confidence interval [CI] 0.24-0.60, p < 0.01). Analysis also showed a trend of increased risks of secondary glaucoma after CPT. No statistically significant differences were found in analyzing risks of mortality, enucleation, and cataract. CONCLUSIONS: Our study suggested no difference in mortality, enucleation rate and cataract formation rate comparing the two treatments. Lower local recurrence rate and possibly higher secondary glaucoma incidence was noted among patients treated with CPT. Nevertheless, the overall level of evidence is limited, and further high-quality studies are necessary to provide a more definitive conclusion.

Reversible Sensing Technologies Using Upcycled TPEE: Crafting pH and Light Responsive Materials towards Sustainable Monitoring.

Multiresponsive materials with reversible and durable characteristics are indispensable because of their promising applications in environmental change detections. To fabricate multiresponsive materials in mass production, however, complex reactions and impractical situations are often involved. Herein, a dual responsive (light and pH) spiropyran-based smart sensor fabricated by a simple layer-by-layer (LbL) assembly process from upcycled thermoplastic polyester elastomer (TPEE) materials derived from recycled polyethylene terephthalate (r-PET) is proposed. Positively charged chitosan solutions and negatively charged merocyanine-COOH (MC-COOH) solutions are employed in the LbL assembly technique, forming the chitosan-spiropyran deposited TPEE (TPEE-CH-SP) film. Upon UV irradiation, the spiropyran-COOH (SP-COOH) molecules on the TPEE-CH-SP film undergo the ring-opening isomerization, along with an apparent color change from colorless to purple, to transform into the MC-COOH molecules. By further exposing the TPEE-CH-MC film to hydrogen chloride (HCl) and nitric acid (HNO3) vapors, the MC-COOH molecules can be transformed into protonated merocyanine-COOH (MCH-COOH) with the simultaneous color change from purple to yellow.

Solvent-Tailored Reversible Self-Assembly: Unveiling Ionic Transport Nanochannels in Block Copolymer Composite Electrolytes.

Block copolymer composite electrolytes have gained extensive attention for their promising performance in ionic conductivity and mechanical properties, making them valuable for future technologies. The control of the ionic conductivity through the self-assembly of block copolymers, however, remains a great challenge, especially in confined environments. In this study, we prepare block copolymer composite electrolytes using polystyrene-block-poly(ethylene oxide) (PS-b-PEO, SEO) as the polymer matrix and anodic aluminum oxide (AAO) templates as the ceramic skeleton. The self-assembly of SEO creates nanoscale ion transport pathways in the PEO regions through ionic interactions with lithium salts. The nanopores of the AAO templates provide a confined environment for complex phase separation of SEO controlled by selective solvent vapor annealing. Our findings demonstrate that transforming self-assembled SEO structures allows for precise control of ion transport pathways with cylindrical structures exhibiting 20 times higher ionic conductivities than those of helical structures. For AAO templates with pore diameters of 20 nm (SEO-LiTFSI@AAO-20), the ionic conductivities are approximately 410 times higher than those with pore diameters of 200 nm (SEO-LiTFSI@AAO-200), owing to the larger specific surface areas within the smaller nanopores. Utilizing the self-assembly of SEO not only enables the construction of vertically aligned ion transport channels on various scales but also offers a fascinating approach to tailor the conductive capabilities of composite electrolytes, enhancing the ion transport efficiency and allowing for the flexible design of block copolymer composite electrolytes.

Hybrid Learning Models for IMU-Based HAR with Feature Analysis and Data Correction.

This paper proposes a novel approach to tackle the human activity recognition (HAR) problem. Four classes of body movement datasets, namely stand-up, sit-down, run, and walk, are applied to perform HAR. Instead of using vision-based solutions, we address the HAR challenge by implementing a real-time HAR system architecture with a wearable inertial measurement unit (IMU) sensor, which aims to achieve networked sensing and data sampling of human activity, data pre-processing and feature analysis, data generation and correction, and activity classification using hybrid learning models. Referring to the experimental results, the proposed system selects the pre-trained eXtreme Gradient Boosting (XGBoost) model and the Convolutional Variational Autoencoder (CVAE) model as the classifier and generator, respectively, with 96.03% classification accuracy.

Area-Selective Atomic Layer Deposition on Metal/Dielectric Patterns: Amphiphobic Coating, Vaporizable Inhibitors, and Regenerative Processing.

Area-selective atomic layer deposition (AS-ALD) has drawn significant attention in the past decade because of the potential applications in bottom-up processing, which enables fabricating nanostructures at the atomic level without multiple patterning and lithographic processing that could easily cause alignment issues. Although AS-ALD has been demonstrated using various self-assembled monolayers (SAMs), it is still challenging to develop wet SAM deposition for AS-ALD that is suitable for industrial and semiconductor processes. In this work, we demonstrate highly effective AS-ALD of Al2O3 on Co/SiO2 patterned wafers using fluorinated thiol in both solution and vapor phase. Compared with conventional SAMs using alky-thiols, the fluorinated-thiol SAMs demonstrate greater blocking ability against ALD precursors owing to excellent hydrophobicity. Furthermore, much shorter deposition times can be achieved in vaporizable fluorinated thiol molecules, improving processing throughput and productivity. Most importantly, the SAM regeneration and redosing processes can further enhance the selectivity of AS-ALD, opening a promising avenue to realize the bottom-up approach in practical semiconductor applications.

Cardiopulmonary functional capacity in Taiwanese children with ventricular septal defects.

BACKGROUND: Children with ventricular septal defects (VSDs) are considered to have no difference in cardiopulmonary functional capacity with healthy children of the same age; however, studies have shown contradictory findings. The aim of this study was to assess whether Taiwanese children with VSDs exhibited cardiopulmonary deficits. METHODS: This is a retrospective cohort study with the data collected from January 2010 to December 2021. All patients and controls (age-, sex-, and body mass index -matched) underwent cardiopulmonary exercise testing (CPET) and pulmonary function test. RESULTS: In total, 157 VSD patients (80 patients with surgically closed VSDs, 77 patients with unrepaired VSDs) and 157 healthy controls were recruited. Pulmonary function test showed significant among-group differences in maximal voluntary ventilation (MVV) (p = 0.015). The surgically closed group had lower MVV compared to the control group. Regarding CPET, we found VSD patients had lower peak oxygen uptake than the controls (surgically closed group: 30.84 ± 6.27 ml/kg/min; unrepaired group: 32.00 ± 5.95 ml/kg/min; control group: 36.76 ± 6.50 ml/kg/min, p < 0.001). There was also significant among-group differences in aerobic capacity (surgically closed group: 21.20 ± 4.39 ml/kg/min; unrepaired group: 21.68 ± 4.47 ml/kg/min; control group: 26.25 ± 4.33 ml/kg/min, p < 0.001). In addition, the surgically closed group had lower heart rate average at anaerobic threshold than the control group (surgically closed group: 138.11 ± 16.42 bpm; control group: 145.78 ± 15.53 bpm, p = 0.002). CONCLUSION: Taiwanese children with VSD, whether surgically closed or not, have poorer cardiopulmonary performance than age-matched healthy children, and the results of the surgically closed group were even worse.

Effects of photobiomodulation as an adjunctive treatment in chronic obstructive pulmonary disease: a narrative review.

Chronic obstructive pulmonary disease (COPD) is a disease characterized by chronic airway inflammation and remodeling and lung parenchymal inflammation and destruction, which result in many pulmonary and extrapulmonary manifestations. The anti-inflammatory effect of photobiomodulation (PBM) has been reported in previous studies. This review was conducted to evaluate the direct effect of PBM on lung inflammation in COPD. The other effects of PBM on modulation of peripheral and respiratory muscle metabolism and angiogenesis in lung tissues were also discussed. The databases of PubMed, Cochrane Library, and Google Scholar were searched to find the relevant studies. Keywords included PBM and related terms, COPD-related signs, and lung inflammation. A total of 12 articles were selected and reviewed in this study. Based on the present review, PBM is helpful in reducing lung inflammation through decreasing the inflammatory cytokines and chemokines at multiple levels and increasing anti-inflammatory cytokines. In addition, PBM also improves both peripheral and respiratory muscle metabolism and promote angiogenesis. This review demonstrated that PBM is a promising adjunctive treatment modality for COPD management which merits further validation.

Microbiological Safety of Cut Melons Sold in Portuguese Retail Markets: A Pilot Study.

Due to the increasing consciousness of a healthy diet and pursuit of convenience among consumers, the market for fresh fruit is on the rise, and the melon is among the most welcome of fruits for its sensory attributes and nutritional properties. Consumption safety of cut fruit remains an issue of concern that may affect public health. This study aimed to perform the microbiological characterisation of a melon, Cucumis melo L. var. "Piel de Sapo", cut by retailers, wrapped in plastic cling film and kept at room temperature in local fruit shops. In addition, the possible transfer of relevant foodborne pathogens, during slicing, from the peel to the interior of the melon, and bacterial growth, were also evaluated when the melon slices were stored at abusive temperatures for 2 days. In this pilot study, a low number of samples were characterised microbiologically (26 cut melons), and some isolates were identified by 16S rRNA sequencing. No Listeria spp. or Salmonella spp. were detected in any of the samples, while Escherichia coli and Staphylococcus aureus were present in four and six out of twenty-six samples, respectively. Following artificial contamination of melons with cocktails of Salmonella spp., E. coli and Listeria monocytogenes, it was observed that, despite the smaller number of L. monocytogenes recovered, all the pathogens were transferred from the contaminated peels to the interior of the melons. Furthermore, over storage time, significant differences were observed (p < 0.05) between the counts obtained from melon slices immediately after cutting (0 h), and after 24 and 48 h at 20 °C, with an increase of about 4 log CFU/g in all the pathogens. In conclusion, some cut melons classified as microbiologically unacceptable or unsatisfactory are being sold in local fruit shops in the Porto Metropolitan Area, Portugal. Although absent in the samples analysed, Salmonella spp. and L. monocytogenes, if present, can be transferred from the outside to the inside of the fruit by the cutting blade and, if not consumed immediately and stored at abusive temperatures, this ready-to-eat product poses a risk of infection. This pilot study, performed for the first time in Portugal under these conditions, clearly demonstrates the need for education campaigns to alert local sellers and consumers of the risk posed by cut melons.

A Novel Deep Neural Network Method for HAR-Based Team Training Using Body-Worn Inertial Sensors.

Human activity recognition (HAR) became a challenging issue in recent years. In this paper, we propose a novel approach to tackle indistinguishable activity recognition based on human wearable sensors. Generally speaking, vision-based solutions struggle with low illumination environments and partial occlusion problems. In contrast, wearable inertial sensors can tackle this problem and avoid revealing personal privacy. We address the issue by building a multistage deep neural network framework that interprets accelerometer, gyroscope, and magnetometer data that provide useful information of human activities. Initially, the stage of variational autoencoders (VAE) can extract the crucial information from raw data of inertial measurement units (IMUs). Furthermore, the stage of generative adversarial networks (GANs) can generate more realistic human activities. Finally, the transfer learning method is applied to enhance the performance of the target domain, which builds a robust and effective model to recognize human activities.

Adolescents with Atopic Dermatitis Have Lower Peak Exercise Load Capacity and Exercise Volume Compared with Unaffected Peers.

Background: Sweating and increased skin temperature caused by exercise can reduce physical activity and the willingness to exercise in adolescents with atopic dermatitis. This study was conducted to investigate the exercise load capacity of adolescents with atopic dermatitis and analyzed their exercise behavior and motivation. Methods: Adolescents with and without atopic dermatitis were assigned to the atopic dermatitis group and control group (n = 27 each). Both groups completed a cardiopulmonary exercise test and questionnaires to assess their exercise capacity, weekly exercise volume, exercise motivation, and self-efficacy, respectively. Results: The ratio of measured forced vital capacity to the predicted forced vital capacity and the peak oxygen consumption of the atopic dermatitis group were significantly lower than those of the control group. The Godin Leisure-Time Exercise Questionnaire scores of the atopic dermatitis group were significantly lower than those of the control group. As for the Behavioral Regulation in Exercise Questionnaire 2, the scores for the introjected and identified regulations of the atopic dermatitis group were significantly lower than those of the control group. Regarding the Multidimensional Self-Efficacy for Exercise Scale, the scheduling efficacy and total scores of the atopic dermatitis group were significantly lower than those of the control group. Conclusions: Adolescents with atopic dermatitis had lower peak exercise capacity and lower weekly exercise volume. Furthermore, they lacked the negative feelings toward inactivity and the self-confidence to plan regular exercise independently. The results of this study suggest that adolescents with atopic dermatitis should be encouraged to engage in regular indoor exercise.

Physiological comfort evaluation under different airflow directions in a heating environment.

BACKGROUND: Indoor airflow and thermal comfort are difficult to assess through subjective evaluations because airflow sensations can differ based on various factors, such as personal characteristics, interests, preferences, and the current state of mind. Thus, subjective evaluations should be combined with objective assessments, such as physiological measurements. This study evaluated airflow and thermal comfort through physiological measurements, including skin temperature, electroencephalography, respiration, and electrocardiography, in addition to subjective evaluations. METHODS: Twenty participants entered a test room at 30 °C after staying in an acclimation room at 18 °C for 20 min. They were exposed to indirect and direct airflow toward their faces and performed four tasks under each condition: resting, counting to 10 s following time alerts, counting to 10 s in the mind, and mental calculation. The mean speed of the air directed to the participants' faces was 0.123 m/s and 0.225 m/s in the indirect and direct conditions, respectively. RESULTS: The gamma and beta bands of electroencephalograms taken at the left-temporal (T3) and left-parietal (P7) sites showed significantly lower amplitudes under the indirect condition (gamma, T3: p = 0.034, P7: p = 0.030; beta, T3: p = 0.051, P7: p = 0.028). Similarly, the variability of respiration was lower under the indirect condition (p < 0.010). The amplitudes of gamma and beta waves showed significant correlations with anxiousness levels (gamma, T3: r = 0.41; beta, T3: r = 0.35). CONCLUSIONS: Our results suggest that indirect heating airflow causes lower mental stress and fatigue than those induced by direct flow, which is equivalent to more comfort. The results of this study suggest that physiological measurements can be used for the evaluation of unconscious indoor comfort, which cannot be detected by subjective evaluations alone.

Prediction of white-coat hypertension and white-coat uncontrolled hypertension using machine learning algorithm.

Aims: The detection of white-coat hypertension/white-coat uncontrolled hypertension (WCH/WUCH) with out-of-office blood pressure (BP) monitoring is time- and resource-consuming. We aim to develop a machine learning (ML)-derived prediction model based on the characteristics of patients from a single outpatient visit. Methods and results: Data from two cohorts in Taiwan were used. Cohort one (970 patients) was used for development and internal validation, and cohort two (464 patients) was used for external validation. WCH/WUCH was defined as an office BP of ≥140/90 mmHg and daytime ambulatory BP of <135/85 mmHg in treatment-naïve or treated individuals. Logistic regression, random forest (RF), eXtreme Gradient Boosting, and artificial neural network models were trained using 26 patient parameters. We used SHapley Additive exPlanations values to provide explanations for the risk factors. All models achieved great area under the receiver operating characteristic curve (AUROC), specificity, and negative predictive value in both validations (AUROC = 0.754-0.891; specificity = 0.682-0.910; negative predictive value = 0.831-0.968). The RF model was the best performing (AUROC = 0.884; sensitivity = 0.619; specificity = 0.887; negative predictive value = 0.872; accuracy = 0.819). The five most influential features of the RF model were office diastolic BP, office systolic BP, current smoker, estimated glomerular filtration rate, and fasting glucose level. Conclusion: Our prediction models achieved good performance, underlining the feasibility of applying ML models to outpatient populations for the diagnosis of WCH and WUCH. Further validation with other prospective data sets should be considered in the future.

High-Ecological Cognitive Intervention to Improve Cognitive Skills and Cognitive-Functional Performance for Older Adults With Mild Cognitive Impairment.

IMPORTANCE: Evidence of the effectiveness of cognitive activity and preparatory tasks in improving the cognitive skills and functional performance of people with cognitive decline is limited. OBJECTIVE: To examine the efficacy of a high-ecological cognitive intervention. DESIGN: Quasi-experimental, pretest-posttest design with nonequivalent control. SETTING: Community. PARTICIPANTS: Older adults with mild cognitive impairment from two senior centers. INTERVENTION: Twelve 90-min weekly group sessions of a high-ecological cognitive intervention using simulated everyday cognitive tasks (experimental group) and of nutrition education (active control group). Outcomes and Measures: Cognitive skills were measured with the Color Trails Test (CTT), the Contextual Memory Test (CMT; Immediate Recall [CMT-Im] and Delayed Recall [CMT-De] tasks), and the Wechsler Adult Intelligence Scale-Fourth Edition Digit Span subtest (Digits Forward and Digits Backward). Cognitive-functional performance was measured with the Rivermead Behavioural Memory Test-Third Edition (RBMT-3; Immediate Recall [RBMT-3-Im] and Delayed Recall [RBMT-3-De] tasks) and the Cognitive Failures Questionnaire (CFQ). RESULTS: Thirty-seven participants (M age = 70.84 yr; 70.3% women) met the inclusion criteria for analysis (20 participants in the intervention group, 17 participants in the control group). Multivariate linear regression showed that the intervention group improved significantly more than the control group on the CTT, CMT-Im, and RBMT-3-Im but not on the CMT-De, RBMT-3-De, and CFQ. CONCLUSIONS AND RELEVANCE: Twelve 90-min weekly group sessions of a high-ecological cognitive intervention improved attention, executive function, immediate memory, and objective cognitive-functional performance with immediate-memory task demands. What This Article Adds: Carefully designed and structured simulated everyday cognitive tasks can be used as a cognitive training agent to improve both cognitive skills and objective cognitive-functional performance. The effectiveness of group-based cognitive interventions depends on the skills of occupational therapy practitioners in activity analysis and grading.

Photoswitchable Composite Polymer Electrolytes Using Spiropyran-Immobilized Nanoporous Templates.

Composite polymer electrolytes (CPEs) with smart, stimuli-responsive characteristics have gained considerable attention owing to their noninvasive manipulation and applications in future technologies. To address this potential, in this work, we demonstrate photoresponsive composite polymer electrolytes, consisting of gel polymer electrolyte (GPE) and spiropyran-immobilized nanoporous anodic aluminum oxide (SP-AAO) templates. Under UV irradiation, the close SP form isomerizes to the open merocyanine (MC) form, creating extremely polarized AAO surfaces; whereas, under visible light irradiation, the MC form reverts to the SP form, creating neutral surface conditions. The electrostatic interactions between ions and AAO surfaces are investigated by attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy. Moreover, the behavior of ionic conductivity of the GPE@SP-AAO is found to be consistent with the kinetics of isomerization tracked by UV-Vis spectroscopy. This work provides a promising platform for developing next-generation photoelectronic smart devices.

Neurofeedback training improves episodic and semantic long-term memory performance.

Understanding and improving memory are vital to enhance human life. Theta rhythm is associated with memory consolidation and coding, but the trainability and effects on long-term memory of theta rhythm are unknown. This study investigated the ability to improve long-term memory using a neurofeedback (NFB) technique reflecting the theta/low-beta power ratio on an electroencephalogram (EEG). Our study consisted of three stages. First, the long-term memory of participants was measured. In the second stage, the participants in the NFB group received 3 days of theta/low-beta NFB training. In the third stage, the long-term memory was measured again. The NFB group had better episodic and semantic long-term memory than the control group and significant differences in brain activity between episodic and semantic memory during the recall tests were revealed. These findings suggest that it is possible to improve episodic and semantic long-term memory abilities through theta/low-beta NFB training.

Physiological and subjective comfort evaluation under different airflow directions in a cooling environment.

Indoor comfort is influenced by airflow direction, but subjective evaluations can differ. This study evaluates the airflow comfort with subjective assessments and physiological measurements, including skin temperature, electroencephalograms, and electrocardiograms. Nineteen participants entered a test room at 20°C after staying in a room at 32°C for acclimation. They were exposed to indirect and direct airflow conditions to their faces and performed four tasks under each condition: resting, counting to 10 s following time alerts, counting to 10 s in mind, and mental calculation. Subjective assessments showed relatively higher thermal sensation and pleasantness under indirect airflow. The psychological time calculated from counting behaviors was longer under indirect airflow, indicating suppression of negative emotions. The face temperatures significantly declined during experiments under direct airflow. The beta and gamma bands of electroencephalograms were inhibited under the indirect condition, and these amplitudes were negatively correlated with pleasant feelings. Electrocardiogram parameters indicated that sympathetic nervous activity was predominant during counting, following alerts and mental calculation in indirect airflow. This study supports the comfort of indirect airflow based on reliable evidence.

Laser-Induced NanoKneading (LINK): Deformation of Patterned Azopolymer Nanopillar Arrays via Photo-Fluidization.

Ordered arrays of polymer nanostructures have been widely investigated because of their promising applications such as solar-cell devices, sensors, and supercapacitors. It remains a great challenge, however, to manipulate the shapes of individual nanostructures in arrays for tailoring specific properties. In this study, an effective strategy to prepare anisotropic polymer nanopillar arrays via photo-fluidization is presented. Azobenzene-containing polymers (azopolymers) are first infiltrated into the nanopores of ordered anodic aluminum oxide (AAO) templates. After the removal of the AAO templates using weak bases, azopolymer nanopillar arrays can be prepared. Upon exposure of linearly polarized lights, azobenzene groups in the azopolymers undergo trans-cis-trans photoisomerization, causing mass migration and elongation of the nanopillar along with the polarization directions. As a result, anisotropic nanopillar arrays can be fabricated, of which the deformation degrees are controlled by the illumination times. Furthermore, patterned nanopillar arrays can also be constructed with designed photomasks. This work presents a practical and versatile strategy to fabricate arrays of anisotropic nanostructures for future technical applications.

Use sonoelastography to predict the reparability of large-to-massive rotator cuff tears.

INTRODUCTION: Most symptomatic large-to-massive rotator cuff tears (RCTs) should be operated, but the surgical reparability depended on the degree of rotator cuff muscle atrophy or fatty infiltration. The orthopedic surgeons will decide whether the teared stump is reparable during the surgery, but preoperative evaluation can be done by some assessment tools. Magnetic resonance imaging (MRI) was used in recent studies to predict the reparability of large-to-massive RCTs, but the clinical availability was not as good as ultrasound. We hypothesize that the ultrasound elastography can predict the reparability of large-to-massive RCTs. METHODS: This is a prospective observational study and participants with large-to-massive RCTs who are going to have surgeries will be included. Out investigators will evaluate the shoulder passive range of motion (ROM) and strength of all participants. Participants' degree of shoulder pain and activities of daily living (ADLs) will be assessed by American Shoulder and Elbow Surgeons (ASES) score. The ultrasound elastography will be used to evaluate the tissue quality of supraspinatus muscle and infraspinatus muscle. To test the reliability of the ultrasound elastography, two physicians will perform the ultrasound elastography independently and twenty participants will be selected for the reliability test. Besides, MRI will be used to evaluate the size of tear, the degree of tendon retraction, fatty infiltration of rotator cuff muscles, and muscle atrophy. Finally, the orthopedic surgeons will perform surgeries and decide whether the teared stump can be completely repaired intraoperatively. The primary analysis is the predictive validity of ultrasound elastography for the reparability of large-to-massive RCTs. Before the predictive validity of ultrasound elastography is measured, our investigators will assess the reliability of ultrasound elastography when administered to cases with large-to-massive RCTs, and we will check the correlations between the findings of ultrasound elastography and MRI. DISCUSSION: The outcome will provide the evidence of ultrasound elastography for preoperative evaluation of large-to-massive RCTs. The relationships between the findings of ultrasound elastography and MRI will also be examined for further analysis. TRIAL REGISTRATION: Clinicaltrials.gov NCT03682679. Date of Registration: 25 September 2018, https://clinicaltrials.gov/ct2/show/NCT03682679?cond=rotator+cuff&cntry=TW&draw=2&rank=1.

Correction to: Depressive symptom trajectories in the first 10 years of diabetes diagnosis: antecedent factors and link with future disability in Taiwan.

The original article can be found online at.