The cross-sectional morphology of the proximal femoral diaphysis is defined by the anteversion angle.

Osteoporosis in postmenopausal women is one of the causes of femoral fractures and is prevented by the administration of bisphosphonates. Individual morphologies are considered to increase the risk of atypical fractures associated with long-term administration. To evaluate cortical bone morphology quantitatively, we established a method to measure the distance from the center point of a cross-section to the external and internal borders based on CT images. Using this method, 44 sides of a female femoral skeleton specimen were examined and areas of protrusion and thickening in the medial anterior and lateral posterior regions just below the lesser trochanter were identified. These positions strongly correlated with the anteversion angle, suggesting the involvement of the distribution of the load received from body weight defined by the angle. The finite element method was used to examine the relationships between the positions of these areas with compressive and tensile stress distribution areas in the one-legged standing condition. The medial anterior region and lateral posterior region protruded and thickened in response to compressive and tensile stress, respectively. In addition, a hierarchical relationship was observed between the anteversion angle, tensile stress distribution, protrusion, and thickening in femurs with thinning of cortical bone, indicating that morphogenesis occurs adaptively to loading. The present results demonstrate the usefulness of this method in considering the formation mechanism and function of the femoral diaphysis and suggest that bone remodeling is necessary to maintain adaptability.

The Accessory Muscular Head of the Triceps Brachii Muscle with Tendinous Attachment / Cabeza Muscular Accesoria del Músculo Triceps Braquial con Inserción Tendinosa

SUMMARY: Variations in the triceps brachii muscle are uncommon, and especially limited reports exist on the accessory heads of tendinous origin that attach near the upper medial part of the humerus. During anatomical training at Nagasaki University School of Medicine, the accessory head of the triceps brachii muscle was observed on the right upper arm of a 72-year-old Japanese female. It arose tendinously from the medial side of the upper humerus, then formed a muscle belly and joined the distal side of the long head. This accessory head had independent nerve innervation, and the innervating nerve branched from a bundle of the radial nerve, which divided the nerve innervating the long head and the posterior brachial cutaneous nerve. The origin of the innervation of the accessory head was the basis for determining that this muscle head was an accessory muscle to the long head of the triceps brachii muscle. Embryologically, we discuss that part of the origin of the long head of the triceps brachii muscle was separated early in development by the axillary nerve and the posterior brachial circumflex artery, and it slipped into the surgical neck of the humerus and became fixed there. The accessory head crossed the radial nerve and deep brachial artery. When clinicians encounter compression of the radial nerve or profunda brachii artery, they should consider the presence of accessory muscles as a possible cause.

Las variaciones en el músculo tríceps braquial son poco comunes y existen informes especialmente limitados sobre las cabezas accesorias de origen tendinoso que se insertan cerca de la parte medial superior del húmero. Durante un entrenamiento anatómico en la Facultad de Medicina de la Universidad de Nagasaki, se observó la cabeza accesoria del músculo tríceps braquial en la parte superior del brazo derecho de una mujer japonesa de 72 años. Se originaba tendinosamente desde el lado medial de la parte superior del húmero, luego formaba un vientre muscular y se unía al lado distal de la cabeza larga. Esta cabeza accesoria tenía inervación nerviosa independiente, cuyo nervio se ramificaba a partir de un ramo del nervio radial, que dividía el nervio que inervaba la cabeza larga y el nervio cutáneo braquial posterior. El origen de la inervación de la cabeza accesoria fue la base para determinar que esta cabeza muscular era un músculo accesorio de la cabeza larga del músculo tríceps braquial. Embriológicamente, discutimos que parte del origen de la cabeza larga del músculo tríceps braquial se separó temprananamente en el desarrollo por el nervio axilar y la arteria circunfleja braquial posterior, y se deslizó hacia el cuello quirúrgico del húmero y quedó fijado allí. La cabeza accesoria cruzaba el nervio radial y la arteria braquial profunda. Cuando los médicos encuentran compresión del nervio radial o de la arteria braquial profunda, deben considerar la presencia de mús- culos accesorios como una posible causa.

Evaluation of cortical bone density using clinical computed tomography images: Detection of cortical porosity areas or transitional zones in human femoral diaphyses.

Age-related changes in human trabecular bone and cortical bone are known to vary. Although the porosity of cortical bone has been suggested to increase the risk of bone fracture, most of the currently available instruments for osteoporosis testing target trabecular bone. In this study, we evaluated cortical bone density using clinical computed tomography (CT) and compared the reliability of the cortical bone density index (CDI) with that of a polished male femoral bone from the same region. CDI images revealed that the porous area of cortical bone was extended in low CDI values. Moreover, this method was used to semi-quantitatively evaluate the cortical bones of the diaphysis of male femur specimens (n = 46). We found that there was a significant relationship (r = 0.70, p < 0.01) between the value of the cortical index (the ratio of cortical bone area to the cross-sectional area of the femoral diaphysis) and the average of CDI in the low signal area. Our findings suggest that the smaller the cortical bone occupancy, the more areas of consequential bone density loss were present. This may be the first step toward using clinical CT to assess cortical bone density.

Cross-sectional geometry of the femoral diaphyseal cortical bones: analysis of central mass distribution.

A detailed analysis of differences in skeletal shape among many individuals is expected to reveal the mechanical significance behind various morphological features. To confirm the distribution of the cortical bone region in cross sections, the relative position of the central mass distribution (CMD) of the cortical bone region to the CMD of the entire cross section was examined. A total of 90 right human femoral skeletons were examined using clinical multi-slice computed tomography. For nine cross sections of each femur, we determined the CMD of the whole area, including both cortical bone and medullary areas, as CMD-W, and that of the cortical bone region in the same cross section as CMD-C, and they were compared. The medial and anterior portion of the cortex was relatively thick just below the lesser trochanter. The posterior cortical bone tended to be relatively thick in the region from the center to the distal part of the diaphysis. Females had a significantly more medially deviated CMD than males throughout the entire diaphysis. These results suggest that femurs with advanced cortical bone thinning tend to have a concentration of cortical bone in their medial portion. CMD-C was located farther from the diaphysis axis as the degree of medial bending increased. Conversely, the greater the lateral bending of the diaphysis, the closer CMD-C was to the diaphysis axis. As the amount of bone decreases with age, self-adjustment could occur so that the cortical bone's critical area remains to prevent a decrease in mechanical strength.

Application of Methods for a Morphological Analysis of the Femoral Diaphysis Based on Clinical CT Images to Prehistoric Human Bone: Comparison of Modern Japanese and Jomon Populations from Hegi Cave, Oita, Japan.

A morphological analysis of ancient human bones is essential for understanding life history, medical history, and genetic characteristics. In addition to external measurements, a three-dimensional structural analysis using CT will provide more detailed information. The present study examined adult male human skeletons excavated from Hegi cave, Nakatsu city, Oita Prefecture. CT images were taken from the femurs of adult males (Initial/Early Jomon Period (n = 10) and Late Jomon Period (n = 5)). Cross-sectional images of the diaphysis from below the lesser trochanter to above the adductor tubercle were obtained using the method established by Imamura et al. (2019) and Imamura et al. (2021). Using Excel formulas and macros, the area of cortical bone, thickness, and degree of curvature were quantitatively analyzed. The results were compared with data on modern Japanese. The maximum thickness of cortical bone in the diaphysis and the degree of the anterior curvature were significantly greater in Late Jomon humans than in the other groups. In contrast to modern humans, the majority of Jomon femurs showed the S-shaped curvature with the medial side at the top position and the lateral side at the lower position. The present results demonstrate that Late Jomon humans had a wider range of activity than the other groups and also provide insights into diseases in the hip and knee joints of Jomon humans.

Similarities and Differences in Bone Mineral Density between Multiple Sites in the Same Individual: An Elderly Cadaveric Study.

Bone mineral density (BMD) is known to vary based on various factors, and the degree of variation is site-specific. However, few studies have investigated the relationship between bone density at trabecular bone-rich and cortical bone-rich sites in the same individual. In this study, we attempted to measure BMD at multiple sites using whole-body computed tomography images taken immediately after death and to clarify the similarities and differences between skeletal sites. Additionally, we aimed to examine the factors that influence changes in BMD, such as the loading environment, bone microstructure, and the ossification process of each skeletal region. A 3D model containing BMD data of the skull, clavicle, lumbar vertebrae, and femur (neck and diaphysis) was created using computed tomography images taken immediately after the death of 60 individuals (28 men and 32 women, average age: 84.0 years) who consented to participate in the study before death. Arbitrary measurement sites were defined, and bone density was measured at each site. We found that the BMDs of all regions were negatively correlated with age, but this correlation was weaker in the skull than in other regions. The negative correlation was especially pronounced in areas with more trabecular bones in men and in areas with more cortical bones in women. Furthermore, these findings suggest that factors, such as the loading environment, bone microstructure, and the ossification process of the skeletal sites, affect the BMD. Furthermore, our results suggest that it is important to assess the BMD of cortical bone in older women.

Guidelines for cadaver dissection in education and research of clinical medicine (The Japan Surgical Society and The Japanese Association of Anatomists).

This article translates the guidelines for cadaver surgical training (CST) published in 2012 by Japan Surgical Society (JSS) and Japanese Association of Anatomists from Japanese to English. These guidelines are based on Japanese laws and enable the usage of donated cadavers for CST and clinical research. The following are the conditions to implement the activities outlined in the guidelines. The aim is to improve medicine and to contribute to social welfare. Activities should only be carried out at medical or dental universities under the centralized control by the department of anatomy under the regulation of Japanese law. Upon the usage of cadavers, registered donors must provide a written informed-consent for their body to be used for CST and other activities of clinical medicine. Commercial use of cadavers and profit-based CST is strongly prohibited. Moreover, all the cadaver-related activities except for the commercial-based ones require the approval of the University's Institutional Review Board (IRB) before implementation. The expert committee organized at each university for the implementation of CST should summarize the implementation of the program and report the details of the training program, operating costs, and conflicts of interest to the CST Promotion Committee of JSS.

Guidelines for cadaver dissection in education and research of clinical medicine (The Japan Surgical Society and The Japanese Association of Anatomists).

This article translates the guidelines for cadaver surgical training (CST) published in 2012 by Japan Surgical Society (JSS) and Japanese Association of Anatomists from Japanese to English. These guidelines are based on Japanese laws and enable the usage of donated cadavers for CST and clinical research. The following are the conditions to implement the activities outlined in the guidelines. The aim is to improve medicine and to contribute to social welfare. Activities should only be carried out at medical or dental universities under the centralized control by the department of anatomy under the regulation of Japanese law. Upon the usage of cadavers, registered donors must provide a written informed-consent for their body to be used for CST and other activities of clinical medicine. Commercial use of cadavers and profit-based CST is strongly prohibited. Moreover, all the cadaver-related activities except for the commercial-based ones require the approval of the University's Institutional Review Board (IRB) before implementation. The expert committee organized at each university for the implementation of CST should summarize the implementation of the program and report the details of the training program, operating costs, and conflicts of interest to the CST Promotion Committee of JSS.

Usage of cadavers in surgical training and research in Japan over the past decade.

The "Guidelines for Cadaver Dissection in Education and Research of Clinical Medicine" drafted by the Japan Surgical Society (JSS) and the Japanese Association of Anatomists in 2012 helped dispel legal concerns over cadaver surgical training (CST) and the usage of donated human bodies for research and development (R&D) in the country. Subsequently, in the fiscal year 2018, the Ministry of Health, Labour and Welfare increased the funding for CST, prompting its wider implementation. This study analyzed data obtained in 2012-2021 through the reporting system of the JSS-CST Promotion Committee to map the usage of cadavers for clinical purposes, specifically education and R&D, in Japan. We found that the number of medical universities using cadavers for CST and R&D programs was just 5 in 2012, and it reached 38 for the decade. Thus, about half of Japan's medical universities implemented such programs over the period. Meanwhile, the total number of programs was 1,173. In the clinical field, the highest number of programs were implemented in orthopedics (27%), followed by surgery (21%), and neurosurgery (12%). Based on the purpose, the most common objective of the programs (approximately 70%) was acquiring advanced surgical techniques. Further, the highest number of programs and participants were recorded in 2019 (295 programs, 6,537 participants). Thus, the guidelines helped expand cadaver usage for clinical purposes in Japan. To further promote the clinical usage of cadavers in medical and dental universities throughout Japan, sharing know-how on operating cadaver laboratories and building understanding among the general public is recommended.

The risk of Creutzfeldt-Jakob disease infection in cadaveric surgical training.

The usefulness of cadaver surgical training in the clinical field is already well known. In Japan, the number of universities introducing cadaver surgical training is increasing. In addition to formalin fixation, various fixation methods are used, such as the Thiel method, saturated salt solution method, N-vinyl-2-pyrrolidone method, and fresh-frozen cadavers. Although protection against infections during fixation and cadaver surgical training has been implemented in most universities, it is currently inadequate. Furthermore, the possibility of undiagnosed infectious diseases in donors cannot be excluded. Prion diseases, such as Creutzfeldt-Jakob disease, are relatively rare, but they are fatal, with no effective treatment. The abnormal prion protein that causes prion diseases is resistant to formaldehyde and cannot be inactivated by all methods of cadaver fixation presently in use. Recently developed real-time quaking-induced conversion has been reported to be a useful screening method for prion infection. In addition, this article aims to raise awareness of prion diseases in cadaver surgical training by reviewing the current understanding of prion diseases in cadavers and their screening methods.

Double-sided superior vena cava: developmental considerations associated with the thymic veins / Vena cava superior de doble cara: consideraciones de desarrollo asociadas con las venas tímicas

SUMMARY: The superior vena cava is usually located only on the right side, but persistence of the left superior vena cavais observed in about 0.3 to 0.5 % of adults. A routine dissection of the cadaver of a 91-year-old Japanese female, whose cause of death was sepsis due to cholecystitis, was performed at Nagasaki University and revealed a double-sided superior vena cava. On the right side, the superior vena cava opened to the right atrium, while on the left, it opened into the extended coronary sinus. Veins in the left head, neck and upper limb regions joined to form the persistent left superior vena cava, with eventual drainage into the expanded coronary vein. An anastomosing branch occurred between each superior vena cava, and two thymic veins opened to the anastomosing branch. The azygos vein in the azygos venous system opened into the right superior vena cava, whereas a hemi-azygos vein opened into the azygos vein. The accessory hemi-azygos vein also opened into the azygos vein and opened cranially into the left superior vena cava. The left supreme intercostal vein also opened into the left superior vena cava. Several studies have reported a persistent left superior vena cava and the various considerations for its occurrence. Here, we propose a new hypothesis for the embryonic development of the persistent left superior vena cava with the thymic vein. This hypothesis essentially states that the left brachiocephalic vein fails to mature due to inadequate venous return from the thymic vein during the embryonic period, and the left superior vena cava then remains to maintain venous return from the left head, neck and upper limb. We also discuss the clinical significance of the persistent left superior vena cava.

RESUMEN: Usualmente la vena cava superior se localiza solo en el lado derecho, sin embargo en aproximadamente 0,3 a 0,5 % de los adultos se observa la persistencia de la vena cava superior izquierda. En la Universidad de Nagasaki se realizó una disección de rutina del cadáver de una mujer japonesa de 91 años, cuya causa de muerte fue sepsis debido a una colecistitis. El cuerpo presentaba una vena cava superior doble. En el lado derecho, la vena cava superior llegaba al atrio derecho, mientras que en el lado izquierdo drenaba al seno coronario. Las venas de las regiones de la cabeza, el cuello y del miembro superior izquierdo formaban la vena cava superior izquierda persistente, con drenaje hacia la vena coronaria. Se observó una rama anastomótica entre cada vena cava superior y dos venas tímicas drenaban a la rama anastomótica. La vena ácigos drenaba a la vena cava superior derecha, mientras que una vena hemiácigos drenaba a la vena ácigos. La vena hemiácigos accesoria también drnaba en la vena ácigos y cranealmente lo hacia la vena cava superior izquierda. La vena intercostal suprema izquierda drenaba en la vena cava superior izquierda. Varios estudios han informado una vena cava superior izquierda persistente y las diversas consideraciones para su aparición. Aquí, proponemos una nueva hipótesis para el desarrollo embrionario de la vena cava superior izquierda persistente con la vena tímica, que esencialmente establece que la vena braquiocefálica izquierda no se dearrolla debido a un retorno venoso inadecuado de la vena tímica durante el período embrionario, y se mantiene la vena cava superior izquierda para el retorno venoso de la cabeza, el cuello y el miembro superior izquierdo. Además se informa de la importancia clínica de la persistencia de la vena cava superior izquierda.

Usefulness of structured-cadaveric training for trans-anal pelvic exenteration.

PURPOSE: Structured training using cadaveric simulation is useful for trans-anal surgery; however, no studies have examined the effectiveness of cadaveric training for advanced trans-anal surgery including pelvic exenteration (PE). METHODS: Twelve colorectal surgeons attended a total of 10 cadaveric simulation training courses between 2016 and 2021 and completed a questionnaire at the end of the program. We divided 14 consecutive patients who underwent trans-anal PE between 2015 and 2021 into two groups: pre-training group and post-training group, and compared the clinico-pathological features between the groups. RESULTS: The median length of clinical experience of the surgeons was 12 years. There was high score agreement among the surgeons that the course was useful for recognition of anatomical and layer structure, training for trans-anal total mesorectal excision and trans-anal PE, and reducing complications specific to the trans-anal approach. Compared with the pre-training group, patients in the post-training group had a higher rate of two-team surgery (77.8% vs 0%, P = .021), and shorter time to specimen removal (273 vs 423 min, P = .045). CONCLUSIONS: Structured-cadaveric training has potential use as a technical step-up in advanced trans-anal surgery that might contribute to better short-term outcomes in the clinical setting.

Significant Asymmetry of the Bilateral Upper Extremities of a Skeleton Excavated from the Mashiki-Azamabaru Site, Okinawa Island, Japan.

The human skeleton of a young adult male with marked asymmetry of the bilateral upper extremities was excavated from the Mashiki-Azamabaru site (3000-2000 BCE) on the main island of Okinawa in the southwestern archipelago of Japan. The skeleton was buried alone in a corner of the cemetery. In this study, morphological and radiographic observations were made on this skeleton, and the pathogenesis of the bone growth disorder observed in the left upper limb was discussed. The maximum diameter of the midshaft of the humerus was 13.8 mm on the left and 21.2 mm on the right. The long bones comprising the left upper extremity lost the structure of the muscle attachments except for the deltoid tubercle of the humerus. The bone morphology of the right upper extremity and the bilateral lower extremities was maintained and was close to the mean value of females from the Ohtomo site in northwestern Kyushu, Japan, during the Yayoi period. It is assumed that the anomalous bone morphology confined to the left upper extremity was secondary to the prolonged loss of function of the muscles attached to left extremity bones. In this case, birth palsy, brachial plexus injury in childhood, and acute grey matter myelitis were diagnosed. It was suggested that this person had survived into young adulthood with severe paralysis of the left upper extremity due to injury or disease at an early age.

Novel Computer-Aided Diagnosis Software for the Prevention of Retained Surgical Items.

BACKGROUND: Retained surgical items are a serious human error. Surgical sponges account for 70% of retained surgical items. To prevent retained surgical sponges, it is important to establish a system that can identify errors and avoid the occurrence of adverse events. To date, no computer-aided diagnosis software specialized for detecting retained surgical sponges has been reported. We developed a software program that enables easy and effective computer-aided diagnosis of retained surgical sponges with high sensitivity and specificity using the technique of deep learning, a subfield of artificial intelligence. STUDY DESIGN: In this study, we developed the software by training it through deep learning using a dataset and then validating the software. The dataset consisted of a training set and validation set. We created composite x-rays consisting of normal postoperative x-rays and surgical sponge x-rays for a training set (n = 4,554) and a validation set (n = 470). Phantom x-rays (n = 12) were prepared for software validation. X-rays obtained with surgical sponges inserted into cadavers were used for validation purposes (formalin: Thiel's method = 252:117). In addition, postoperative x-rays without retained surgical sponges were used for the validation of software performance to determine false-positive rates. Sensitivity, specificity, and false positives per image were calculated. RESULTS: In the phantom x-rays, both the sensitivity and specificity in software image interpretation were 100%. The software achieved 97.7% sensitivity and 83.8% specificity in the composite x-rays. In the normal postoperative x-rays, 86.6% specificity was achieved. In reading the cadaveric x-rays, the software attained both sensitivity and specificity of >90%. CONCLUSIONS: Software with high sensitivity for diagnosis of retained surgical sponges was developed successfully.

Morphological divergence in the curvature of human femoral diaphyses: Tracing the central mass distributions of cross-sections.

The diaphysis of the human femoral bone has a physiological anterior curvature; additionally, there is a curvature to the medial side or lateral side. In addition to compression stress from gravity during standing, walking, and running, these bones are continuously exposed to complex stresses from the traction forces of the various strong muscles attached to them. The femoral diaphysis is subjected to these mechanical stresses, and the direction and size of its curvature are defined according to Wolff's law and the mechanostat theory of Frost. The purpose of this study was to quantitatively evaluate the curvature of the femoral diaphysis in Japanese skeletons by determining the curve connecting the central mass distributions (CMD) of cross-sectional images. A total of 90 right femora (46 males and 44 females) were randomly selected from modern Japanese skeletal specimens. Full-length images of these bones were acquired using a clinical computed tomography scanner. The range between the lower end of the lesser trochanter and the adductor tubercle of each femur was divided at regular intervals to obtain ten planes, and nine levels were analyzed. The CMD curve was determined by connecting the CMDs of each of the nine cross-sections. First, the CMD of a cross-section in each of the nine slices was calculated, and the nine trajectories were superimposed from above. Then, by converting the shape of the entire CMD curve to superimpose the coordinates of the endpoint on the starting point, a closed arc representing the curvature of the femur was determined. For both males and females, the patterns varied from mostly medial to largely lateral curvature. The size of the curvature also varied for individuals. By analyzing only the coordinates of the vertex of the CMD curve of each femoral bone, the outlines of the diaphyseal curvatures could be recognized. The femora were thereby divided into two groups: medial bending and lateral bending. Considering males and females together, the number in the lateral-curvature group (n = 51) was larger than that in the medial-curvature group (n = 39). Moreover, the average age of the lateral-curvature group was significantly higher than that of the medial-curvature group (p < 0.05). In males, with an increase in the cortical bone proportion of the cross-sectional area, the anterior vertex of diaphyseal bending tended to be more prominent. This cortical proportion was significantly higher in the medial-curvature groups than in the lateral-curvature group (p < 0.01). The phenomena observed in this study may be related to pathophysiologies such as atypical fractures of the femur and osteoarthritis of the knee joints.

Measurement of femoral axial offset.

Purpose to examine the accuracy and reproducibility of the femoral axial offset measured from the retrocondylar plane by computed tomography (CT). Bone specimens of the femur of 15 males and 15 females were analyzed. CT imaging was performed and data of the coordinates were collected (center of femoral head, center of an ellipse around greater trochanter, center of an ellipse around the base of femoral neck, posterior edge of great trochanter, and both posterior condyles). The angle between the line connecting center of the femoral head and center of an ellipse around greater trochanter and the line connecting both posterior condyles was set as anteversion 1. The angle between the line connecting the center of femoral head and center of an ellipse around base of the femoral neck and the line connecting both posterior condyles was set as anteversion 2. The femoral axial offset was measured from the retrocondylar plane. Measurements were performed three times on the same subject, and intrarater reliability (ICC) was determined. In addition, interrater reliability (ICC) was determined by comparing data from three raters. The mean value for anteversion 1 was 20.1° for males and 22.7° for females. The values for anteversion 2 were 16.0° and 19.9° for males and females, respectively. Offset was 34.0 and 33.4 mm in males and females, respectively. Intrarater ICC and interrater ICC exceeded 0.81 for both methods, suggesting that the method of measurement was reliable. Accuracy and reproducibility of the measurement of femoral axial offset from the retrocondylar plane were high.

Gross anatomical investigation of the muscular head between the vastus lateralis and intermedius in the Japanese population: a cadaver study.

Unlike the general understanding of the quadriceps femoris, the existence of a new muscular head between the vastus lateralis and the vastus intermedius was reported, and named the tensor of the vastus intermedius in the Swedish population. The purpose of this study was to investigate the presence and form of the muscular head in the Japanese population and to clarify its structure by gross anatomical approaches. A total of 35 thighs of 20 Japanese cadavers were investigated. We searched for the muscular head and classified it into four types. In addition, nerve fiber analysis was performed for each classification type. Regarding classification, 11% were the independent type, 29% were the common type, 37% were the vastus lateralis type, and 23% were the vastus intermedius type. Based on nerve fiber analysis, in the common type, the muscular head was under dual nerve supply from the vastus lateralis and intermedius. The other three types were innervated only by nerves from the vastus lateralis. The target muscular head may always be present in Japanese. The nerves from the vastus lateralis were always distributed in the target muscular head based on nerve fiber analysis; therefore, this muscular head may be most closely related to the vastus lateralis. The name of this muscular head should be "the accessory head of the vastus lateralis" rather than "the tensor of the vastus intermedius."

Reduced cortical bone thickness increases stress and strain in the female femoral diaphysis analyzed by a CT-based finite element method: Implications for the anatomical background of fatigue fracture of the femur.

The incidence of hip fractures is increasing in Japan and is high among women older than 70 years. While osteoporosis has been identified as one of the causative factors of fracture, atypical femoral fracture has emerged as a potential complication of bisphosphonate therapy. Atypical femoral fracture is prevalent among Asian women and has been attributed to morphological parameters. Age-related decreases in the morphological parameters of the femoral diaphysis, such as cortical bone thickness, cortical cross-sectional area, and the cortical index, were reported in Japanese women prior to bisphosphonate drugs being approved for treatment. Thus, in the present study, the relationships between biomechanical and morphological parameters were analyzed using a CT-based finite element method. Finite element models were constructed from 44 femurs of Japanese women aged 31-87 years using CT data. Loading conditions were set as the single-leg configuration and biomechanical parameters, maximum and minimum principal stresses, Drucker-Prager equivalent stress, maximum and minimum strains, and strain energy density were calculated in 7 zones from the subtrochanteric region to distal diaphysis. Pearson's correlation coefficient test was performed to investigate relationships with morphological parameters. While absolute stresses gradually decreased from the subtrochanteric region to distal diaphysis, absolute strains markedly declined in the proximal diaphysis and were maintained at the same levels as those in the distal regions. All types of stresses and minimum principal strain in the femoral diaphysis scored higher absolute values in the high-risk group (≥70 years, n = 28) than in the low-risk group (<70 years, n = 16) (p < 0.05). The distribution patterns of equivalent stress and strain energy density were similar to that of Young's modulus, except for the region of the linea aspera. All biomechanical parameters correlated with morphological parameters and correlation efficiencies, with the reciprocal of cortical bone thickness showing the strongest correlation. The present results demonstrated that biomechanical parameters may be predicted by calculating the cortical bone thickness of femurs not treated with bisphosphonates. Furthermore, strain appeared to be repressed at a low level despite differences in stress intensities among the regions by bone remodeling. This remodeling is considered to be regulated by Wolff's law driven by equivalent stress and strain energy densities from the proximal to distal femur. The present results will promote further investigations on the contribution of morphological parameters in the femoral diaphysis to the onset of atypical femoral fracture.

Course of the thoracic nerves around the umbilicus within the posterior layer of the rectus sheath: a cadaver study.

Rectus sheath block is used to anesthetize thoracic nerves around the umbilicus. However, the appropriate point for anesthetic injection during rectus sheath block has not been determined anatomically. Here, we examined the course of thoracic nerve T10 at the posterior layer of the rectus sheath and the anatomical relationship between the nerve and the rectus abdominis and transversus abdominis muscles in formalin-fixed adult cadavers. The cranio-caudal distance from a horizontal line running through the umbilicus to where the thoracic nerve T10 passes through the posterior layer of the rectus sheath was 33.8 ± 14.4 (mean ± standard deviation) mm, while that from the horizontal line running through the umbilicus to the position where the lateral edge of the rectus abdominis muscle and the medial border of the transversus abdominis muscle cross was 33.1 ± 17.1 mm. The position where the lateral edge of the rectus abdominis muscle and the medial border of the transversus abdominis muscle cross approximates the position where thoracic nerves T10 passes through the posterior layer of the rectus sheath. Our results identify effective landmarks to guide the performance of rectus sheath block.