Impacts of audiovisual simultaneity perception on single-task and dual-task gaits in middle-aged and older adults.

BACKGROUND: While dual-task walking requires the ability to integrate sensory information from multiple ongoing sources, it remains unknown whether dual-task walking is more affected than single-task walking by the multisensory integration ability. RESEARCH QUESTION: How does the audiovisual temporal integration ability affect single-task and dual-task gaits in the aging population? METHODS: One hundred and thirty healthy middle-aged and older adults (age = 64.7 ± 6.4 years) completed an audiovisual simultaneity judgment (AVSJ) task and underwent single-task, motor dual-task, and cognitive dual-task gait assessments. In the AVSJ task, participants judged whether a flash and an auditory stimulus presented at different stimulus onset asynchronies were simultaneous. The accuracy and precision of the AVSJ performance were assessed using the point of subjective simultaneity (PSS) and the temporal binding window (δ), respectively. A lower absolute PSS and δ indicated better performance. Participants held a cup of water and performed serial-7 subtraction for motor and cognitive dual-task gait assessments, respectively. The spatiotemporal gait parameters and their variability were calculated. The influences of PSS and δ on the gait parameters of the three gaits were examined with multiple hierarchical regressions. RESULTS: Only the cognitive dual-task gait was significantly affected by PSS and δ. Greater PSS predicted a longer single support time (ß = 0.195, p = 0.024) and its variability (ß = 0.224, p = 0.011). Greater δ predicted greater step time variability (ß = 0.198, p = 0.022). SIGNIFICANCE: Declined perception of audiovisual simultaneity particularly degrades temporal control of cognitive dual-task walking, highlighting the importance of assessing and training this ability after midlife.

Three-dimensional ultrafast charge-density-wave dynamics in CuTe.

Charge density waves (CDWs) involved with electronic and phononic subsystems simultaneously are a common quantum state in solid-state physics, especially in low-dimensional materials. However, CDW phase dynamics in various dimensions are yet to be studied, and their phase transition mechanism is currently moot. Here we show that using the distinct temperature evolution of orientation-dependent ultrafast electron and phonon dynamics, different dimensional CDW phases are verified in CuTe. When the temperature decreases, the shrinking of c-axis length accompanied with the appearance of interchain and interlayer interactions causes the quantum fluctuations (QF) of the CDW phase until 220 K. At T < 220 K, the CDWs on the different ab-planes are finally locked with each other in anti-phase to form a CDW phase along the c-axis. This study shows the dimension evolution of CDW phases in one CDW system and their stabilized mechanisms in different temperature regimes.

When crystals flow.

Semicrystalline polymers are solids that are supposed to flow only above their melting temperature. By using confinement within nanoscopic cylindrical pores, we show that a semicrystalline polymer can flow at temperatures below the melting point with a viscosity intermediate to the melt and crystal states. During this process, the capillary force is strong and drags the polymer chains in the pores without melting the crystal. The unexpected enhancement in flow, while preserving the polymer crystallites, is of importance in the design of polymer processing conditions applicable at low temperatures, e.g., cold drawn polymers such as polytetrafluoroethylene, self-healing, and in nanoconfined donor/acceptor polymers used in organic electronics.

Few-cycle THz wave manipulation with a high degree of freedom via f-t modulation.

THz waves have been intensively applied in many fields, e.g., spectroscopy, imaging, and communications. However, owing to the rarity of available techniques for manipulating circularly polarized few-cycle THz waves on picosecond time scales, most of the current studies are conducted with linearly polarized THz waves. Here we demonstrate circularly polarized (CP) THz (dual) pulses generated by a polarization-twisting pulse/dual pulse (PTP/PTDP). The polarization-twisting optical dual pulses can be generated via a modified Michelson interferometer (MI) system, which provides the ability to control the frequency, helicity, and time interval of the dual pulses arbitrarily and individually. Such a novel, to the best of our knowledge, modulation technique shows huge potential for applications, not only in imaging and spectroscopy but also in next-generation communications.

Energy-Resolved Ultrafast Spectroscopic Investigation on the Spin-Coupled Electronic States in Multiferroic Hexagonal HoMnO3.

A complete temperature-dependent scheme of the Mn3+ on-site d-d transitions in multiferroic hexagonal HoMnO3 (h-HoMnO3) thin films was unveiled by energy-resolved ultrafast spectroscopy. The results unambiguously revealed that the ultrafast responses of the e1g and e2g states differed significantly in the hexagonal HoMnO3. We demonstrated that the short-range antiferromagnetic and ferroelectric orderings are more relevant to the e2g state, whereas the long-range antiferromagnetic ordering is intimately coupled to both the e2g and e1g states. Moreover, the primary thermalization times of the e2g and e1g states were 0.34 ± 0.08 ps and 0.38 ± 0.08 ps, respectively.

Twisted oxide lateral homostructures with conjunction tunability.

Epitaxial growth is of significant importance over the past decades, given it has been the key process of modern technology for delivering high-quality thin films. For conventional heteroepitaxy, the selection of proper single crystal substrates not only facilitates the integration of different materials but also fulfills interface and strain engineering upon a wide spectrum of functionalities. Nevertheless, the lattice structure, regularity and crystalline orientation are determined once a specific substrate is chosen. Here, we reveal the growth of twisted oxide lateral homostructure with controllable in-plane conjunctions. The twisted lateral homostructures with atomically sharp interfaces can be composed of epitaxial "blocks" with different crystalline orientations, ferroic orders and phases. We further demonstrate that this approach is universal for fabricating various complex systems, in which the unconventional physical properties can be artificially manipulated. Our results establish an efficient pathway towards twisted lateral homostructures, adding additional degrees of freedom to design epitaxial films.

Using Exciton/Trion Dynamics to Spatially Monitor the Catalytic Activities of MoS2 during the Hydrogen Evolution Reaction.

The adsorption and desorption of electrolyte ions strongly modulates the carrier density or carrier type on the surface of monolayer-MoS2 catalyst during the hydrogen evolution reaction (HER). The buildup of electrolyte ions onto the surface of monolayer MoS2 during the HER may also result in the formation of excitons and trions, similar to those observed in gate-controlled field-effect transistor devices. Using the distinct carrier relaxation dynamics of excitons and trions of monolayer MoS2 as sensitive descriptors, an in situ microcell-based scanning time-resolved liquid cell microscope is set up to simultaneously measure the bias-dependent exciton/trion dynamics and spatially map the catalytic activity of monolayer MoS2 during the HER. This operando probing technique used to monitor the interplay between exciton/trion dynamics and electrocatalytic activity for two-dimensional transition metal dichalcogenides provides an excellent platform to investigate the local carrier behaviors at the atomic layer/liquid electrolyte interfaces during electrocatalytic reaction.

Bovine tuberculosis in Taiwan, 2008-2019.

Bovine tuberculosis (bTB) is a zoonosis caused by Mycobacterium bovis. The impact of bTB on global TB control has been underestimated. We adopted the One Health approach to human bTB surveillance in Taiwan. Of 20,972 human TB cases, 202 (1.0%) were bTB, 78.2% were in males, 85.1% were new cases, 83.2% were pulmonary TB, and most were in Central (52.5%) and Southern (24.8%) Taiwan. Only 18.8% of bTB patients had known animal contact. Of the 202 human M. bovis strains, 100% were resistant to pyrazinamide (PZA), 30.2% were concurrently resistant to isoniazid (INH) and 2.0% were multidrug resistant, defined as being resistant to at least INH and rifampin. Whereas, of the 22 animal M. bovis strains, 100% and 22.7% were resistant to PZA and INH, respectively. Seven spoligotypes and 25 mycobacterial interspersed repetitive unit genotypes were identified. The predominant genotype, SB0265, was also prevalent in livestock. Notably, six animal-specific M. bovis genotypes were identified. bTB differential diagnosis and drug resistance detection are crucial for TB control. Comprehensive surveillance and human-animal interface investigations are needed.

Topological Proximity-Induced Dirac Fermion in Two-Dimensional Antimonene.

Antimonene is a promising two-dimensional (2D) material that is calculated to have a significant fundamental bandgap usable for advanced applications such as field-effect transistors, photoelectric devices, and the quantum-spin Hall (QSH) state. Herein, we demonstrate a phenomenon termed topological proximity effect, which occurs between a 2D material and a three-dimensional (3D) topological insulator (TI). We provide strong evidence derived from hydrogen etching on Sb2Te3 that large-area and well-ordered antimonene presents a 2D topological state. Delicate analysis with a scanning tunneling microscope of the evolutionary intermediates reveals that hydrogen etching on Sb2Te3 resulted in the formation of a large area of antimonene with a buckled structure. A topological state formed in the antimonene/Sb2Te3 heterostructure was confirmed with angle-resolved photoemission spectra and density-functional theory calculations; in particular, the Dirac point was located almost at the Fermi level. The results reveal that Dirac fermions are indeed realized at the interface of a 2D normal insulator (NI) and a 3D TI as a result of strong hybridization between antimonene and Sb2Te3. Our work demonstrates that the position of the Dirac point and the shape of the Dirac surface state can be tuned by varying the energy position of the NI valence band, which modifies the direction of the spin texture of Sb-BL/Sb2Te3 via varying the Fermi level. This topological phase in 2D-material engineering has generated a paradigm in that the topological proximity effect at the NI/TI interface has been realized, which demonstrates a way to create QSH systems in 2D-material TI heterostructures.

Carbon Nanotube-Hydrogel Composites Facilitate Neuronal Differentiation While Maintaining Homeostasis of Network Activity.

It is often assumed that carbon nanotubes (CNTs) stimulate neuronal differentiation by transferring electrical signals and enhancing neuronal excitability. Given this, CNT-hydrogel composites are regarded as potential materials able to combine high electrical conductivity with biocompatibility, and therefore promote nerve regeneration. However, whether CNT-hydrogel composites actually influence neuronal differentiation and maturation, and how they do so remain elusive. In this study, CNT-hydrogel composites are prepared by in situ polymerization of poly(ethylene glycol) around a preformed CNT meshwork. It is demonstrated that the composites facilitate long-term survival and differentiation of pheochromocytoma 12 cells. Adult neural stem cells cultured on the composites show an increased neuron-to-astrocyte ratio and higher synaptic connectivity. Moreover, primary hippocampal neurons cultured on composites maintain morphological synaptic features as well as their neuronal network activity evaluated by spontaneous calcium oscillations, which are comparable to neurons cultured under control conditions. These results indicate that the composites are promising materials that could indeed facilitate neuronal differentiation while maintaining neuronal homeostasis.

Interfacial Interactions During In Situ Polymer Imbibition in Nanopores.

Using in situ nanodielectric spectroscopy we demonstrate that the imbibition kinetics of cis-1,4-polyisoprene in native alumina nanopores proceeds in two time regimes both with higher effective viscosity than bulk. This finding is discussed by a microscopic picture that considers the competition from an increasing number of chains entering the pores and a decreasing number of fluctuating chain ends. The latter is a direct manifestation of increasing adsorption sites during flow. At the same time, the longest normal mode is somewhat longer than in bulk. This could reflect an increasing density of topological constraints of chains entering the pores with the longer loops formed by other chains.

Femtosecond time-evolution of mid-infrared spectral line shapes of Dirac fermions in topological insulators.

Mid-infrared (MIR) light sources have much potential in the study of Dirac-fermions (DFs) in graphene and topological insulators (TIs) because they have a low photon energy. However, the topological surface state transitions (SSTs) in Dirac cones are veiled by the free carrier absorption (FCA) with same spectral line shape that is always seen in static MIR spectra. Therefore, it is difficult to distinguish the SST from the FCA, especially in TIs. Here, we disclose the abnormal MIR spectrum feature of transient reflectivity changes (ΔR/R) for the non-equilibrium states in TIs, and further distinguish FCA and spin-momentum locked SST using time-resolved and linearly polarized ultra-broadband MIR spectroscopy with no environmental perturbation. Although both effects produce similar features in the reflection spectra, they produce completely different variations in the ΔR/R to show their intrinsic ultrafast dynamics.

CVD growth of large-area InS atomic layers and device applications.

Group-III monochalcogenides of two-dimensional (2D) layered materials have attracted widespread attention among scientists due to their unique electronic performance and interesting chemical and physical properties. Indium sulfide (InS) is attracting increasing interest from scientists because it has two distinct crystal structures. However, studies on the synthesis of highly crystalline, large-area, and atomically thin-film InS have not been reported thus far. Here, the chemical vapor deposition (CVD) synthesis method of atomic InS crystals has been reported in this paper. The direct chemical vapour phase reaction of metal oxides with chalcogen precursors produces a large-sized hexagonal crystal structure and atomic-thickness InS flakes or films. The InS atomic films are merged with a plurality of triangular InS crystals that are uniform and entire and have surface areas of 1 cm2 and controllable thicknesses in bilayers or trilayers. The properties of the as-grown highly crystalline samples were characterized by spectroscopic and microscopic measurements. The ion-gel gated InS field-effect transistors (FETs) reveal n-type transport behavior, and have an on-off current ratio of >103 and a room-temperature electron mobility of ∼2 cm2 V-1 s-1. Moreover, our CVD InS can be transferred from mica to any substrates, so various 2D materials can be reassembled into vertically stacked heterostructures, thus facilitating the development of heterojunctions and exploration of the properties and applications of their interactions.

Selenium nanoparticle prepared by femtosecond laser-induced plasma shock wave.

A novel approach for the production of both amorphous and crystalline selenium nanoparticles (SeNPs) using femtosecond laser-induced plasma shock wave on the surface of Bi2Se3 topological insulators at room temperature and ambient pressure is demonstrated. The shape and size of SeNPs can be reliably controlled via the kinetic energy obtained from laser pulses, so these are applicable as active components in nanoscale applications. Importantly, the rapid, low-cost and eco-friendly synthesis strategy developed in this study could also be extendable to other systems.

Analysis of Pharmacokinetic and Pharmacodynamic Parameters in EU- Versus US-Licensed Reference Biological Products: Are In Vivo Bridging Studies Justified for Biosimilar Development?

BACKGROUND: Bridging studies are mandatory in the EU and USA if the reference biological product used in the biosimilar comparability exercise is foreign sourced. However, it has been argued that the duplication of bridging studies may limit biosimilar development. OBJECTIVE: The aim of the study was to explore whether it is necessary to conduct pharmacokinetic (PK)/pharmacodynamic (PD) bridging studies for biosimilars. This study examines similarities and differences between EU- and US-licensed reference biological products, based on literature-reported PK and/or PD data. METHODS: We searched PubMed, Drugs@FDA, and European Medicines Agency (EMA) databases to identify biosimilar bridging studies designed to evaluate similarities between EU- and US-licensed reference biological products. PK and/or PD parameters were retrieved; the ratio of the parameter value of the EU-licensed product to that of the US-licensed product and its corresponding 90% confidence intervals (CIs) were calculated. Similarity was declared if the 90% CIs for the ratios of the PK or PD parameters were within the range of 80-125%. RESULTS: Thirty-one bridging studies were identified for 11 biosimilars, including adalimumab (n = 10), bevacizumab (n = 4), epoetin alfa (n = 1), etanercept (n = 2), filgrastim (n = 1), infliximab (n = 3), insulin glargine (n = 1), insulin lispro (n = 1), PEGfilgrastim (n = 2), rituximab (n = 2), and trastuzumab (n = 4). Most studies showed PK and/or PD similarities between the EU- and US-licensed reference biological products. However, among the 31 studies, only three studies (accounting for two biologics, PEGfilgrastim and adalimumab) showed dissimilarity between the EU and US reference products. Although one bridging study on PEGfilgrastim (Sandoz) indicated dissimilar PKs (maximum observed plasma concentration [Cmax] and area under the concentration-time curve [AUC]) between the reference products, the other study (Mylan) demonstrated similar PK. Moreover, two of ten studies involving adalimumab failed to demonstrate similarities between the reference products. However, for both cases, PK similarities were later confirmed in the follow-up bridging studies with larger sample sizes. CONCLUSION: Our analysis reveals that, in most cases, the reference biological products originated from the EU and those from the USA are almost indistinguishable in terms of PK/PD properties. Additional in vivo bridging studies between reference products from different global regions may not be required if similar physicochemical and structural properties are evident in vitro.

Approval of modified-release products by FDA without clinical efficacy/safety studies: A retrospective survey from 2008 to 2017.

In principle, approval of a modified-release (MR) drug product is based on evidence from pharmacokinetic (PK) and/or pharmacodynamic studies and clinical efficacy/safety studies. The purpose of this survey is (i) to explore the number of new drug applications (NDAs) of MR drug products, approved by the FDA, employ the PK study as a bridge to already-approved immediate-release drug products without conducting their own clinical efficacy/safety studies; and (ii) to understand the type of PK studies are required for such NDAs. To this end, we surveyed the approved records of MR drug products from 2008 to 2017 from the Drug@FDA website, and filtered pertinent information from FDA's assessment reports. A total of five out of 79 products were found. A single dose PK study was conducted to investigate the underlying drug release mechanisms in four of these products. For these products, the applicants also performed multiple dose PK equivalence studies, but the PK parameters used to support the equivalence were different among studies. Information regarding the exposure-response relationship was available for all selected products, which is fundamental for such cases. Although the difference in PK curve shapes is recognized as being critical for the clinical effectiveness, this evaluation was not performed in all selected cases, as indicated in FDA's assessment reports.

Synthesis of Large-Area InSe Monolayers by Chemical Vapor Deposition.

Recently, 2D materials of indium selenide (InSe) layers have attracted much attention from the scientific community due to their high mobility transport and fascinating physical properties. To date, reports on the synthesis of high-quality and scalable InSe atomic films are limited. Here, a synthesis of InSe atomic layers by vapor phase selenization of In2 O3 in a chemical vapor deposition (CVD) system, resulting in large-area monolayer flakes or thin films, is reported. The atomic films are continuous and uniform over a large area of 1 × 1 cm2 , comprising of primarily InSe monolayers. Spectroscopic and microscopic measurements reveal the highly crystalline nature of the synthesized InSe monolayers. The ion-gel-gated field-effect transistors based on CVD InSe monolayers exhibit n-type channel behaviors, where the field effect electron mobility values can be up to ≈30 cm2 V-1 s-1 along with an on/off current ratio, of >104 at room temperature. In addition, the graphene can serve as a protection layer to prevent the oxidation between InSe and the ambient environment. Meanwhile, the synthesized InSe films can be transferred to arbitrary substrates, enabling the possibility of reassembly of various 2D materials into vertically stacked heterostructures, prompting research efforts to probe its characteristics and applications.

FemtoMAX - an X-ray beamline for structural dynamics at the short-pulse facility of MAX IV.

The FemtoMAX beamline facilitates studies of the structural dynamics of materials. Such studies are of fundamental importance for key scientific problems related to programming materials using light, enabling new storage media and new manufacturing techniques, obtaining sustainable energy by mimicking photosynthesis, and gleaning insights into chemical and biological functional dynamics. The FemtoMAX beamline utilizes the MAX IV linear accelerator as an electron source. The photon bursts have a pulse length of 100 fs, which is on the timescale of molecular vibrations, and have wavelengths matching interatomic distances (Å). The uniqueness of the beamline has called for special beamline components. This paper presents the beamline design including ultrasensitive X-ray beam-position monitors based on thin Ce:YAG screens, efficient harmonic separators and novel timing tools.

Atom-Dependent Edge-Enhanced Second-Harmonic Generation on MoS2 Monolayers.

Edge morphology and lattice orientation of single-crystal molybdenum disulfide (MoS2) monolayers, a transition metal dichalcogenide (TMD), possessing a triangular shape with different edges grown by chemical vapor deposition are characterized by atomic force microscopy and transmission electron microscopy. Multiphoton laser scanning microscopy is utilized to study one-dimensional atomic edges of MoS2 monolayers with localized midgap electronic states, which result in greatly enhanced optical second-harmonic generation (SHG). Microscopic S-zigzag edge and S-Mo Klein edge (bare Mo atoms protruding from a S-zigzag edge) terminations and the edge-atom dependent resonance energies can therefore be deduced based on SHG images. Theoretical calculations based on density functional theory clearly explain the lower energy of the S-zigzag edge states compared to the corresponding S-Mo Klein edge states. Characterization of the atomic-scale variation of edge-enhanced SHG is a step forward in this full-optical and high-yield technique of atomic-layer TMDs.