Security and Reliability Analysis of the Power Splitting-Based Relaying in Wireless Sensors Network.

This paper studies the security and reliability of the power splitting (PS)-based relaying in the Internet of Things (IoT) networks with the help of a jammer. Based on the considered system model, we derive outage probability (OP) and intercept probability (IP) under two distinguished schemes, namely, the static PS relaying (SPSR) scheme and the dynamic PS relaying (DPSR) scheme. More precisely, the PS ratio of the former is a constant number, while the latter is optimally adjusted in order to minimize the OP and counts only on the channel gain of the second hop. Numerical results are provided to not only verify the accuracy of the proposed mathematical framework but also identify the trends of both OP and IP with respect to several important parameters. Our findings unveil that the OP and IP have contradictory behavior with respect to the transmit power and number of sources. Moreover, the performance of the DPSR scheme is superior to that of the SPSR scheme.

Performance Analysis of Multihop Full-Duplex NOMA Systems with Imperfect Interference Cancellation and Near-Field Path-Loss.

Outage probability (OP) and potential throughput (PT) of multihop full-duplex (FD) nonorthogonal multiple access (NOMA) systems are addressed in the present paper. More precisely, two metrics are derived in the closed-form expressions under the impact of both imperfect successive interference cancellation (SIC) and imperfect self-interference cancellation. Moreover, to model short transmission distance from the transmit and receive antennae at relays, the near-field path-loss is taken into consideration. Additionally, the impact of the total transmit power on the performance of these metrics is rigorously derived. Furthermore, the mathematical framework of the baseline systems is provided too. Computer-based simulations via the Monte Carlo method are given to verify the accuracy of the proposed framework, confirm our findings, and highlight the benefits of the proposed systems compared with the baseline one.

On the Performance of Underlay Device-to-Device Communications.

This paper comprehensively investigates the performance of the D2D underlaying cellular networks where D2D communications are operated concurrently with cellular networks provided that the aggregate interference measured on licensed users is strictly guaranteed. In particular, we derive the outage probability (OP), the average rate, and the amount of fading (AoF) of the D2D networks in closed-form expressions under three distinct power allocation schemes, i.e., the path-loss-based, equal, and random allocation schemes. It is noted that the considered networks take into consideration the impact of the intra-D2D networks, the inter-interference from the cellular networks and background noise, thus involving many random variables and leading to a complicated mathematical framework. Moreover, we also reveal the behavior of the OP with respect to the transmit power based on the rigorous mathematical frameworks rather than the computer-based simulation results. The derived framework shows that increasing the transmit power is beneficial for the OP of the D2D users. Regarding the cellular networks, the coverage probability (Pcov) of the cellular users is computed in closed-form expression too. Monte Carlo simulations are given to verify the accuracy of the proposed mathematical frameworks. Our findings illustrate that the power allocation method based on prior path-loss information outperforms the other methods in the average sum rate.

Outage Analysis of the Power Splitting Based Underlay Cooperative Cognitive Radio Networks.

In the present paper, we investigate the performance of the simultaneous wireless information and power transfer (SWIPT) based cooperative cognitive radio networks (CCRNs). In particular, the outage probability is derived in the closed-form expressions under the opportunistic partial relay selection. Different from the conventional CRNs in which the transmit power of the secondary transmitters count merely on the aggregate interference measured on the primary networks, the transmit power of the SWIPT-enabled transmitters is also constrained by the harvested energy. As a result, the mathematical framework involves more correlated random variables and, thus, is of higher complexity. Monte Carlo simulations are given to corroborate the accuracy of the mathematical analysis and to shed light on the behavior of the OP with respect to several important parameters, e.g., the transmit power and the number of relays. Our findings illustrate that increasing the transmit power and/or the number of relays is beneficial for the outage probability.

Efficacy of the Tent-Pole Technique in Horizontal Ridge Augmentation

Abstract Objective: To evaluate the efficacy of the technique for ridge augmentation prior to implant placement. Material and Methods: Six patients with nine sites presenting an initial ridge width of smaller than 4 mm were included in this study. The tent-pole technique (combination of osteosynthesis screws measuring 1.5 mm in diameter, ABBM, and resorbable collagen membrane) was applied at defect sites. After eight months of healing time, implants were placed in the treated sites. The primary outcomes (radiographic initial ridge width, re-entry ridge width, ridge width gain) were measured by cone-beam computed tomography in reference buccopalatal cross-sections and the secondary outcomes (clinical parameters) were recorded by a digital caliper at the first and second stages. Results: After grafting, the radiographic ridge width increased by 3.02 ± 1.11 mm (1.57-4.75 mm) at 2 mm below the crest and 3.32 ± 1.70 mm (0.23-5.66 mm) at 6 mm below the crest significantly (p< 0.05). For clinical results, the mean horizontal dimension gain was 3.21 ± 1.04 mm (1.83-4.57 mm), while the mean reduction in dimension was 0.38 ± 0.33 mm. These results were statistically significant (p<0.05). Uneventful healing and no infections or membrane exposure were recorded at all sites during the study process. Three of nine (33.33%) defect sites required additional bone grafting. Conclusion: The tent-pole technique is an effective method for increasing the horizontal ridge dimension, minimizing postoperative complications, and facilitating subsequent implant placement.

A retrospective study evaluating frequency and risk factors of osteonecrosis of the jaw in 576 cancer patients receiving intravenous bisphosphonates.

OBJECTIVE: To evaluate the frequency, risk factors, and clinical presentation of bisphosphonate (BP)-related osteonecrosis of the jaw (BRONJ). STUDY DESIGN: We performed a retrospective analysis of 576 patients with cancer treated with intravenous pamidronate and/or zoledronate between January, 2003 and December, 2007 at the University of Minnesota Masonic Cancer Center and Park Nicollet Institute. RESULTS: Eighteen of 576 identified patients (3.1%) developed BRONJ including 8 of 190 patients (4.2%) with breast cancer, 6 of 83 patients (7.2%) with multiple myeloma, 2 of 84 patients (2.4%) with prostate cancer, 1 of 76 patients (1.3%) with lung cancer, 1 of 52 patients (1.9%) with renal cell carcinoma, and in none of the 73 patients with other malignancies. Ten patients (59%) developed BRONJ after tooth extraction, whereas 7 (41%) developed it spontaneously (missing data for 1 patient). The mean number of BP infusions (38.1 ± 19.06 infusions vs. 10.5 ± 12.81 infusions; P<0.001) and duration of BP treatment (44.3 ± 24.34 mo vs. 14.6 ± 18.09 mo; P<0.001) were significantly higher in patients with BRONJ compared with patients without BRONJ. Multivariate Cox proportional hazards regression analysis showed that diabetes [hazard ratio (HR)=3.40; 95% confidence interval (CI), 1.14-10.11; P=0.028], hypothyroidism (HR=3.59; 95% CI, 1.31-9.83; P=0.013), smoking (HR=3.44; 95% CI, 1.28-9.26; P=0.015), and higher number of zoledronate infusions (HR=1.07; 95% CI, 1.03-1.11; P=0.001) significantly increased the risk of developing BRONJ. CONCLUSIONS: Increased cumulative doses and long-term BP treatment are the most important risk factors for BRONJ development. Type of BP, diabetes, hypothyroidism, smoking, and prior dental extractions may play a role in BRONJ development.

Can hygroscopic expansion compensate polymerization shrinkage? Part I. Deformation of restored teeth.

OBJECTIVE: Restorative materials exhibit contraction and expansion due to polymerization and water absorption. Each process deforms and stresses a restored tooth structure in opposite direction. This study evaluated the tooth deformations during these competing processes. METHODS: Large MOD cavities were prepared in 10 extracted molars. Five were restored with a hydrophobic resin composite (Filtek Supreme, 3M ESPE) and the others with a hydrophilic resin-modified glass-ionomer (Ketac Nano, 3M ESPE). The restored molars and two unrestored controls were stored in water for 24 weeks. The molars were digitized with an optical scanner at baseline, after preparation, restoration, and at 1, 2, 4, 8, 16, and 24 weeks water immersion. The digitized buccal, lingual, and restoration surfaces were analyzed to determine their deformation patterns. The results were statistically analyzed using ANOVA followed by Student-Newman-Keuls post hoc tests (p=0.05). RESULTS: The buccal and lingual tooth surfaces moved 13-14 µm inward after restoration. After water immersion, cuspal deformation in the resin composite group gradually decreased, reversing the shrinkage deformation within four weeks. The immersed resin-modified glass ionomer group reversed shrinkage deformation within one week, and continued to expand further to 28 µm after 24 weeks. Cuspal deformations after water immersion were significantly different with the two restoratives. Restoration surfaces also expanded after water immersion, while the control teeth showed no significant deformation. SIGNIFICANCE: Polymerization shrinkage deformation was compensated by hygroscopic expansion within 4 weeks in teeth restored with a hydrophobic resin composite, while a hydrophilic restorative over-compensated polymerization shrinkage within 1 week causing tooth expansion.