Biodegradable Nanoparticles Based on Pseudo-Proteins Show Promise as Carriers for Ophthalmic Drug Delivery.

Purpose: Drug delivery to treat ocular diseases still is a challenge in ophthalmology. One way to achieve drug delivery that is investigated currently is topical administration of drug-loaded polymeric nanoparticles (NPs) that are able to penetrate ocular barriers. The purpose of this study was optimal preparation of NPs made from pseudo-proteins and evaluation of their ability to penetrate ocular tissues. Methods: Biodegradable NPs of various types were prepared by nanoprecipitation of pseudo-protein composed of l-leucine (L), 1,6-hexanediol (6), and sebacic acid (8) (8L6). Arginine-based cationic polyester amides 8R6 and comb-like polyester amide containing lateral PEG-2000 chains along with 8L6 anchoring fragments in the backbones were used to construct positively charged and PEGylated NPs. They were loaded with fluorescein diacetate (FDA) or rhodamine 6G (Rh6G) as fluorescent probes. Suspensions of the NPs were given to cultivated microglial cells and retinal pigment epithelial (RPE) cells as well as topically on eyes of C57BL/6 mice. Penetration of NPs into the eyes was checked by fluorescence analysis. Results: NPs were prepared, and their properties were characterized. Cultured microglial cells and RPE cells took up the NPs. After topical administration, penetration of NPs into the cornea of the eyes was clearly seen. Small amounts of fluorescent dyes were also found in the lens, the retina, and the sclera depending on the type of NPs. Conclusions: The results showed that the new NPs penetrate ocular tissues after topical administration and are internalized by the cells. This raises confidence that the NPs may be useful carriers of therapeutic agents for ocular delivery.

A Preliminary Evaluation of the Pro-Chondrogenic Potential of 3D-Bioprinted Poly(ester Urea) Scaffolds.

Degeneration of articular cartilage (AC) is a common healthcare issue that can result in significantly impaired function and mobility for affected patients. The avascular nature of the tissue strongly burdens its regenerative capacity contributing to the development of more serious conditions such as osteoarthritis. Recent advances in bioprinting have prompted the development of alternative tissue engineering therapies for the generation of AC. Particular interest has been dedicated to scaffold-based strategies where 3D substrates are used to guide cellular function and tissue ingrowth. Despite its extensive use in bioprinting, the application of polycaprolactone (PCL) in AC is, however, restricted by properties that inhibit pro-chondrogenic cell phenotypes. This study proposes the use of a new bioprintable poly(ester urea) (PEU) material as an alternative to PCL for the generation of an in vitro model of early chondrogenesis. The polymer was successfully printed into 3D constructs displaying adequate substrate stiffness and increased hydrophilicity compared to PCL. Human chondrocytes cultured on the scaffolds exhibited higher cell viability and improved chondrogenic phenotype with upregulation of genes associated with type II collagen and aggrecan synthesis. Bioprinted PEU scaffolds could, therefore, provide a potential platform for the fabrication of bespoke, pro-chondrogenic tissue engineering constructs.

Perspectives of using of "aseptic" drains for abdominal drainage.

AIM: Aim of the study was to evaluate the effectiveness of using different types of drain tubes to prevent and reduce the drain-associated infection rate of abdominal drainage procedures. MATERIALS AND METHODS: 80 cases of used so called "standard", "coladerm" and "chlorhexidine" drain tubes for abdominal drainage were analysed. "Standard" drain tubes were used 35 times and "coladerm" and "chlorhexidine" tubes - 20 and 25 times respectively. There were adopted in different elective and emergency so called "clean", "potentially contaminated" and "contaminated" abdominal surgical procedures. The drain tubes were removed between 2 to 14 days after the operations followed by the bacteriological study in search of bacteria growth on the surface of drainage tubes were examined. RESULTS: Of all 35 cases of used "standard" drain tubes the bacterial growth was found in 23 cases, that means 65,7%; of 20 cases of drains covered by "coladerm" polymer the bacterial growth was found in 6 cases (30%) and only in 3 cases of 25 cases of drain tubes covered by polymer and "chlorhexidine" were positive, that means 12%. The most interesting data were obtained considering the so called "clean" and "contaminated" operations. After the so called "clean" operations the bacterial growth using "standard" drain tubes was found almost in 50% of cases and in 8,3% of cases using "chlorhexidine" drain tubes. After the "potentially contaminated" and "contaminated" operations the bacterial growth was found in 68,2% using "standard" tubes, and using "coladerm" and "chlorhexidine" drain tubes - in 50% and 16,7% respectively. CONCLUSIONS: In our limited experience using of new antimicrobial polymeric composites as coatings mean the adhesion of bacteria and formation of biofilm at drainage tubes is prevented, which can significantly reduce the drain-associated infection rate. KEY WORDS: Abdominal drainage, Bacterial growth, Infection rate.

Generation of cortical neurons from human induced-pluripotent stem cells by biodegradable polymeric microspheres loaded with priming factors.

Ischemic stroke is often associated with loss of cortical neurons leading to various neurological deficits. A cell replacement based on stem cell transplantation to repair the damaged brain requires the generation of specific neuronal subtypes. Recently, induced pluripotent stem cells have been used to generate various subtypes of neurons in vitro for transplantation in stroke-damaged brains. However, whether these cells can be primed as neuronal precursors to become cortical projection neurons by means of biomaterials releasing differentiation factors is not known. Here, we report that microspheres of biodegradable poly(ester-amide) composed of adipic acid, L-phenyl-alanine and 1,4-butanediol, loaded with differentiation factors, can be used to fate human induced pluripotent stem cell-derived long-term expandable neuroepithelial-like stem cells to cortical projection neurons. The three factors, Wnt3A, BMP4 and cyclopamine, were released from loaded microspheres over at least one month following biphasic dynamic time course, promoting cortical differentiation of the cells in vitro. Microspheres did not evoke significant inflammatory response after transplantation into intact rodent brain. Our study shows the potential of biodegradable polymer microspheres to promote neuronal differentiation by continuous release of factors, thereby creating the appropriate microenvironment. This new strategy may improve the efficacy of stem cell-based therapeutic approaches.

New poly(ester urea) derived from L-leucine: electrospun scaffolds loaded with antibacterial drugs and enzymes.

Electrospun scaffolds from an amino acid containing poly(ester urea) (PEU) were developed as promising materials in the biomedical field and specifically in tissue engineering applications. The selected poly(ester urea) was obtained with a high yield and molecular weight by reaction of phosgene with a bis(α-aminoacyl)-α,ω-diol-diester monomer. The polymer having L-leucine, 1,6-hexanediol and carbonic acid units had a semicrystalline character and relatively high glass transition and melting temperatures. Furthermore it was highly soluble in most organic solvents, an interesting feature that facilitated the electrospinning process and the effective incorporation of drugs with bactericidal activity (e.g. biguanide derivatives such as clorhexidine and polyhexamethylenebiguanide) and enzymes (e.g. α-chymotrypsin) that accelerated the degradation process. Continuous micro/nanofibers were obtained under a wide range of processing conditions, being diameters of electrospun fibers dependent on the drug and solvent used. Poly(ester urea) samples were degradable in media containing lipases and proteinases but the degradation rate was highly dependent on the surface area, being specifically greater for scaffolds with respect to films. The high hydrophobicity of new scaffolds had repercussions on enzymatic degradability since different weight loss rates were found depending on how samples were exposed to the medium (e.g. forced or non-forced immersion). New scaffolds were biocompatible, as demonstrated by adhesion and proliferation assays performed with fibroblast and epithelial cells.

Arginine-based biodegradable ether-ester polymers with low cytotoxicity as potential gene carriers.

The success of gene therapy depends on safe and effective gene carriers. Despite being widely used, synthetic vectors based on poly(ethylenimine) (PEI), poly(l-lysine) (PLL), or poly(l-arginine) (poly-Arg) are not yet fully satisfactory. Thus, both improvement of established carriers and creation of new synthetic vectors are necessary. A series of biodegradable arginine-based ether-ester polycations was developed, which consists of three main classes: amides, urethanes, and ureas. Compared to that of PEI, PLL, and poly-Arg, much lower cytotoxicity was achieved for the new cationic arginine-based ether-ester polymers. Even at polycation concentrations up to 2 mg/mL, no significant negative effect on cell viability was observed upon exposure of several cell lines (murine mammary carcinoma, human cervical adenocarcinoma, murine melanoma, and mouse fibroblast) to the new polymers. Interaction with plasmid DNA yielded compact and stable complexes. The results demonstrate the potential of arginine-based ether-ester polycations as nonviral carriers for gene therapy applications.

Cell compatible arginine containing cationic polymer: one-pot synthesis and preliminary biological assessment.

Synthetic cationic polymers are of interest as both nonviral vectors for intracellular gene delivery and antimicrobial agents. For both applications synthetic polymers containing guanidine groups are of special interest since such kind of organic compounds/polymers show a high transfection potential along with antibacterial activity. It is important that the delocalization of the positive charge of the cationic group in guanidine significantly decreases the toxicity compared to the ammonium functionality. One of the most convenient ways for incorporating guanidine groups is the synthesis of polymers composed of the amino acid arginine (Arg) via either application of Arg-based monomers or chemical modification of polymers with derivatives of Arg. It is also important to have biodegradable cationic polymers that will be cleared from the body after their function as transfection or antimicrobial agent is fulfilled. This chapter deals with a two-step/one-pot synthesis of a new biodegradable cationic polymer-poly(ethylene malamide) containing L-arginine methyl ester covalently attached to the macrochains in ß-position of the malamide residue via the α-amino group. The goal cationic polymer was synthesized by in situ interaction of arginine methyl ester dihydrochloride with intermediary poly(ethylene epoxy succinimide) formed by polycondensation of di-p-nitrophenyl-trans-epoxy succinate with ethylenediamine. The cell compatibility study with Chinese hamster ovary (CHO) and insect Schneider 2 cells (S2) within the concentration range of 0.02-500 mg/mL revealed that the new polymer is not cytotoxic. It formed nanocomplexes with pDNA (120-180 nm in size) at low polymer/DNA weight ratios (WR = 5-10). A preliminarily transfection efficiency of the Arg-containing new cationic polymer was assessed using CHO, S2, H5, and Sf9 cells.