The interface between ice and alcohols analyzed by atomic force microscopy.

This study investigates the interface between ice and organic solvents using atomic force microscopy (AFM). Atomically flat ice surfaces were prepared and observed by AFM in 1-octanol, 1-hexanol, and 1-butanol. The results show differences in surface roughness influenced by the interaction of ice and alcohols. Young's modulus of ice was analyzed by force curve measurements, providing valuable insights into the properties of ice in liquid environments. The results showed the characteristics of the ice surface in different solvents, suggesting potential applications in understanding surface and interface phenomena associated with ice under realistic conditions.

Relationship between protein conformational stability and its immunogenicity when administering antigens to mice using adjuvants-Analysis employed the CH2 domain in human antibodies.

Antigen-presenting cells (APCs) play a crucial role in the immune system by breaking down antigens into peptide fragments that subsequently bind to major histocompatibility complex (MHC) molecules. Previous studies indicate that stable proteins can impede CD4+ T cell stimulation by hindering antigen processing and presentation. Conversely, certain proteins require stabilization in order to activate the immune response. Several factors, including the characteristics of the protein and the utilization of different adjuvants in animal experiments, may contribute to this disparity. In this study, we investigated the impact of adjuvants on antigen administration in mice, specifically focusing on the stability of the CH2 domain. Consequently, the CH2 domain induced a stronger IgG response in comparison to the stabilized one when using Alum and PBS (without adjuvant). On the other hand, animal experiment using Freund's adjuvant showed the opposite results. These findings indicate the significance of considering the intrinsic conformational stability of a protein when eliciting its immunogenicity, particularly within the context of vaccine development.

[Modulation of Aggregation and Immunogenicity of a Protein: Based on the Study of Hen Lysozyme].

This study focuses on the modulation of protein aggregation and immunogenicity. As a starting point for investigating long-range interactions within a non-native protein, the effects of perturbing denatured protein states on their aggregation, including the formation of amyloid fibrils, were evaluated. The effects of adducts, sugar modifications, and stabilization on protein aggregation were then examined. We also investigated how protein immunogenicity was affected by enhancing protein conformational stability and other factors.

Effective expression and characterization of the receptor binding domains in SARS-CoV-2 Spike proteins from original strain and variants of concern using Bombyx mori nucleopolyhedrovirus in silkworm.

A new coronavirus, known as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), is responsible for the global pandemic of COVID-19 in 2020. Through structural analysis, it was found that several amino acid residues in the human angiotensin-converting enzyme-2 (hACE2) receptor directly interact with those in the receptor binding domain (RBD) of the spike glycoprotein (S-protein). Various cell lines, including HEK293, HeLa cells, and the baculovirus expression vector system (BEVS) with the insect cell line Sf9, have been utilized to produce the RBD. In this study, we investigated the use of Bombyx mori nucleopolyhedrovirus (BmNPV) and BEVS. For efficient production of a highly pure recombinant RBD protein, we designed it with two tags (His tag and STREP tag) at the C-terminus and a solubilizing tag (SUMO) at the N-terminus. After expressing the protein using BmNPV and silkworm and purifying it with a HisTrap excel column, the eluted protein was digested with SUMO protease and further purified using a Strep-Tactin Superflow column. As a result, we obtained the RBD as a monomer with a yield of 2.6 mg/10 mL serum (equivalent to 30 silkworms). The RBD showed an affinity for the hACE2 receptor. Additionally, the RBDs from the Alpha, Beta, Gamma, Delta, and Omicron variants were expressed and purified using the same protocol. It was found that the RBD from the Alpha, Beta, Gamma, and Delta variants could be obtained with yields of 1.4-2.6 mg/10 mL serum and had an affinity to the hACE2 receptor.

Stabilization of adalimumab Fab through the introduction of disulfide bonds between the variable and constant domains.

Fab is a promising format for antibody drug. Therefore, efforts have been made to improve its thermal stability for therapeutic and commercial use. So far, we have attempted to introduce a disulfide bond into the Fab fragment to improve its thermal stability and demonstrated that it is possible to do this without sacrificing its biochemical function. In this study, to develop a novel stabilization strategy for Fab, we attempted to introduce a disulfide bond between the variable and constant domains and prepared three variants of Fab; H:G10C + H:P210C, L:P40C + L:E165C, and H:G10C + H:P210C + L:P40C + L:E165C. Differential scanning calorimetry measurements showed that each of these variants had improved thermal stability. In addition, the variants with two disulfide bonds demonstrated a 6.5 °C increase in their denaturation temperatures compared to wild-type Fab. The introduction of disulfide bonds was confirmed by X-ray crystallography, and the variants retained their antigen-binding activity. The variants were also found to be less aggregative than the wild type. Our results demonstrate that the introduction of a disulfide bond between the variable and constant domains significantly improves the thermal stability of Fab.

Enhancing thermal stability in the CH2 domain to suppress aggregation through the introduction of simultaneous disulfide bonds in Pichia pastoris.

Protein aggregations decrease production yields and impair the efficacy of therapeutics. The CH2 domain is a crucial part of the constant region of human IgG. But, it is also the least stable domain in IgG, which can result in antibody instability and aggregation problems. We created a novel mutant of the CH2 domain (T250C/L314C, mut10) by introducing a disulfide bond and expressed it using Pichia pastoris. The mut10 variant exhibited enhanced thermal stability, resistance to enzymatic degradation, and reduced aggregation in comparison to the original CH2 domain. However, it was less stable than mut20 (L242C/K334C), which is the variant prepared in a previous study (Gong et al., J. Biol. Chem., 2009). A more advanced mutant, mut25, was created by combining mut10 and mut20. Mut25 artificially contains two disulfide bonds. The new mutant, mut25, showed enhanced thermal stability, increased resistance to enzymatic digestion, and reduced aggregation in comparison to mut20. According to our knowledge, mut25 achieves an unprecedented level of stability among the humanized whole CH2 domains that have been reported so far. Mut25 has the potential to serve as a new platform for antibody therapeutics due to its ability to reduce immunogenicity by decreasing aggregation.

Wettability and Surface Tension of Imidazolium, Ammonium, and Phosphonium Bis(fluorosulfonyl)amide Ionic Liquids: Comparison between Pentyl, Ethoxyethyl, and Ethylthioethyl Groups.

This study particularly compares the surface tensions and contact angles for molten bis(fluorosulfonyl)amide salts of imidazolium, ammonium, and phosphonium cations with the pentyl, ethoxyethyl, or ethylthioethyl group. The examined substrate plates for contact angle measurements include silicate glass, platinum, copper, graphene, and polytetrafluoroethylene (PTFE). In addition, quantum chemistry calculations were performed to obtain the optimized structures of the cations and anions of the ionic liquids (ILs) that were studied here along with some typical anions and their dipole moments, mean polarizabilities, and charge distributions. All ILs showed the same order of contact angles with respect to the substrates: PTFE > graphene ≈ copper ≈ platinum > silicate glass. By comparing the three functional groups, i.e., pentyl, ethoxyethyl, and ethylthioethyl, the ILs with the ethylthioethyl group featured a higher work of adhesion than the respective ILs with the pentyl or ethoxyethyl group. The values of the surface tensions of the ILs followed the same trend for the three functional groups. Based on the Fowkes theory, it was found that the larger surface tensions of the ILs with the ethylthioethyl group compared with pentyl and ethoxyethyl groups were because of the increase in both dispersive and nondispersive components. The quantum chemistry calculations of the ions showed a larger dipole moment and mean polarizability for the cations with the ethylthioethyl group as compared with the pentyl and ethoxyethyl groups. This is consistent with the analysis results of the surface tensions based on the Fowkes theory. By comparing other anions, the dispersive component of the surface tension of the ILs with bis(fluorosulfonyl)amide was large, which is attributed to the small dipole moment of the anion.

Oligomeric state of the N-terminal domain of DnaT for replication restart in Escherichia coli.

DNA replication stops when chemical or physical damage occurs to the DNA. Repairing genomic DNA and reloading the replication helicase are crucial steps for restarting DNA replication. The Escherichia coli primosome is a complex of proteins and DNA responsible for reloading the replication helicase DnaB. DnaT, a protein found in the primosome complex, contains two functional domains. The C-terminal domain (89-179) forms an oligomeric complex with single-stranded DNA. Although the N-terminal domain (1-88) forms an oligomer, the specific residues responsible for this oligomeric structure have not yet been identified. In this study, we proposed that the N-terminal domain of DnaT has a dimeric antitoxin structure based on its primary sequence. Based on the proposed model, we confirmed the site of oligomerization in the N-terminal domain of DnaT through site-directed mutagenesis. The molecular masses and thermodynamic stabilities of the site-directed mutants located at the dimer interface, namely Phe42, Tyr43, Leu50, Leu53, and Leu54, were found to be lower than those of the wild-type. Moreover, we observed a decrease in the molecular masses of the V10S and F35S mutants compared to the wild-type DnaT. NMR analysis of the V10S mutant revealed that the secondary structure of the N-terminal domain of DnaT was consistent with the proposed model. Additionally, we have demonstrated that the stability of the oligomer formed by the N-terminal domain of DnaT is crucial for its function. Based on these findings, we propose that the DnaT oligomer plays a role in replication restart in Escherichia coli.

Discovery of Chlorofluoroacetamide-Based Covalent Inhibitors for Severe Acute Respiratory Syndrome Coronavirus 2 3CL Protease.

The coronavirus disease 2019 (COVID-19) pandemic has necessitated the development of antiviral agents against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). 3C-like protease (3CLpro) is a promising target for COVID-19 treatment. Here, we report a new class of covalent inhibitors of 3CLpro that possess chlorofluoroacetamide (CFA) as a cysteine-reactive warhead. Based on an aza-peptide scaffold, we synthesized a series of CFA derivatives in enantiopure form and evaluated their biochemical efficiency. The data revealed that 8a (YH-6) with the R configuration at the CFA unit strongly blocks SARS-CoV-2 replication in infected cells, and its potency is comparable to that of nirmatrelvir. X-ray structural analysis showed that YH-6 formed a covalent bond with Cys145 at the catalytic center of 3CLpro. The strong antiviral activity and favorable pharmacokinetic properties of YH-6 suggest its potential as a lead compound for the treatment of COVID-19.

Ca2+ -induced structural changes and intramolecular interactions in N-terminal region of diacylglycerol kinase alpha.

Diacylglycerol kinases (DGKs) are multi-domain lipid kinases that modulate the levels of lipid messengers, diacylglycerol, and phosphatidic acid. Recently, increasing attention has been paid to its α isozyme (DGKα) as a potential target for cancer immunotherapy. However, little progress has been made on the structural biology of DGKs, and a detailed understanding of the Ca2+ -triggered activation of DGKα, for which the N-terminal domains likely play a critical role, remains unclear. We have recently shown that Ca2+ binding to DGKα-EF induces conformational changes from a protease-susceptible "open" conformation in the apo state to a well-folded one in its holo state. Here, we further studied the structural properties of DGKα N-terminal (RVH and EF) domains using a series of biophysical techniques. We first revealed that the N-terminal RVH domain is a novel Ca2+ -binding domain, but the Ca2+ -induced conformational changes mainly occur in the EF domain. This was corroborated by NMR experiments showing that the EF domain adopts a molten-globule like structure in the apo state. Further analyses using SEC-SAXS and NMR indicate that the partially unfolded EF domain interacts with RVH domain, likely via hydrophobic interactions in the absence of Ca2+ , and this interaction is modified in the presence of Ca2+ . Taken together, these results present novel insights into the structural rearrangement of DGKα N-terminal domains upon binding to Ca2+ , which is essential for the activation of the enzyme.

Effect of an intermolecular disulfide bond introduced into the first loop of CH1 domain of Adalimumab Fab on thermal stability and antigen-binding activity.

The introduction of intermolecular disulfide bonds by amino acid mutations is an effective method for stabilizing dimeric proteins. X-ray crystal structure of Fab of a therapeutic antibody, adalimumab, revealed the first loop of the CH1 domain to be partially unsolved at position 135-141. To find new sites for the introduction of intermolecular disulfide bonds in adalimumab Fab, Fab mutants targeting the unsolved region were predicted using molecular simulation software. Four Fab mutants, H:K137C-L:I117C, H:K137C-L:F209C, H:S138C-L:F116C and H:S140C-L:S114C, were expressed in the methylotrophic yeast Pichia pastoris. SDS-PAGE analysis of these mutants indicated that H:K137C-L:F209C, H:S138C-L:F116C and H:S140C-L:S114C mutants mostly formed intermolecular disulfide bonds, whereas some H:K137C-L:I117C mutants formed intermolecular disulfide bonds and some did not. Differential scanning calorimetry measurements showed increased thermal stability in all Fab mutants with engineered disulfide bonds. The bio-layer interferometry measurements, for binding of the antigen tumor necrotic factor α, indicated that Fab mutants had less antigen-binding activity than wild-type Fab. In particular, the KD value of H:K137C-L:F209C was ~17 times higher than that of wild-type Fab. Thus, we successfully introduced intermolecular disulfide bonds between the first loop region of the CH1 and CL domains and observed that it increases the thermostability of Fab and affects the antigen-binding activity.

Compound screening identified gossypetin and isoquercitrin as novel inhibitors for amyloid fibril formations of Vλ6 proteins associated with AL amyloidosis.

AL amyloidosis is a life-threatening disease characterized by the deposition of amyloidogenic immunoglobulin light chain secreted from clonal plasma cells. Here we established an in-vitro screening system of amyloid inhibition of a variable domain in λ6 light chain mutant (Vλ6), Wil, and screened a food-additive compound library to identify compounds inhibiting the fibril formation. We found gossypetin and isoquercitrin as novel inhibitors. NMR analysis showed that both compounds directly interacted with natively-folded Wil, and proteolysis experiments demonstrated that these compounds conferred proteolytic resistance, suggesting that the compounds enhance the kinetic stability of Wil. Since gossypetin and isoquercitrin specifically interacted with the protein at micromolar concentrations, these compounds could be used as lead to further develop inhibitors against AL amyloidosis.

Effect of Alkynyl Group on Reactivity in Photoaffinity Labeling with 2-Thienyl-Substituted α-Ketoamide.

Minimalist photo-reactive probes, which consist of a photo-reactive group and a tag for detection of target proteins, are useful tools in chemical biology. Although several diazirine-based and aryl azide-based minimalist probes are available, no keto-based minimalist probe has yet been reported. Here we describe minimalist probes based on a 2-thienyl-substituted α-ketoamide bearing an alkyne group on the thiophene ring. The 3-alkyne probe showed the highest photo-affinity labeling efficiency.

Improvement of the affinity of an anti-rat P2X4 receptor antibody by introducing electrostatic interactions.

We have recently developed a mouse monoclonal antibody (12-10H) binding to the head domain region in rat P2X4 receptor (rP2X4R, which is crucial for the pathogenesis of neuropathic pain) expressed on the cell with the highest binding affinity (KD = 20 nM). However, the 12-10H antibody failed to detect endogenously expressed P2X4Rs in microglia isolated from the spinal cord of rats whose spinal nerves were injured. Then, we prepared R5 mutant, in which five arginine residues were introduced into variable regions except for the "hot spot" in the 12-10H antibody to increase electrostatic interactions with the head domain, an anionic region, in rP2X4R. The mutation resulted in an increase of 50-fold in the affinity of the R5 mutant for the head domain with respect to the intact 12-10H antibody. As a result, detection of P2X4Rs endogenously expressed on primary cultured microglial cells originated from the neonatal rat brain and spinal cord microglia isolated from a rat model of neuropathic pain was achieved. These findings suggest a strategy to improve the affinity of a monoclonal antibody for an anionic antigen by the introduction of several arginine residues into variable regions other than the "hot spot" in the paratope.

Production of scFv, Fab, and IgG of CR3022 Antibodies Against SARS-CoV-2 Using Silkworm-Baculovirus Expression System.

COVID-19, caused by SARS-CoV-2, is currently spreading around the world and causing many casualties. Antibodies against such emerging infectious diseases are one of the important tools for basic viral research and the development of diagnostic and therapeutic agents. CR3022 is a monoclonal antibody against the receptor binding domain (RBD) of the spike protein (S protein) of SARS-CoV found in SARS patients, but it was also shown to have strong affinity for that of SARS-CoV-2. In this study, we produced large amounts of three formats of CR3022 antibodies (scFv, Fab and IgG) with high purity using a silkworm-baculovirus expression vector system. Furthermore, SPR measurements showed that the affinity of those silkworm-produced IgG antibodies to S protein was almost the same as that produced in mammalian expression system. These results indicate that the silkworm-baculovirus expression system is an excellent expression system for emerging infectious diseases that require urgent demand for diagnostic agents and therapeutic agents.

A comprehensive analysis of novel disulfide bond introduction site into the constant domain of human Fab.

Generally, intermolecular disulfide bond contribute to the conformational protein stability. To identify sites where intermolecular disulfide bond can be introduced into the Fab's constant domain of the therapeutic IgG, Fab mutants were predicted using the MOE software, a molecular simulator, and expressed in Pichia pastoris. SDS-PAGE analysis of the prepared Fab mutants from P. pastoris indicated that among the nine analyzed Fab mutants, the F130C(H):Q124C(L), F174C(H):S176C(L), V177C(H):Q160C(L), F174C(H):S162C(L), F130C(H):S121C(L), and A145C(H):F116C(L) mutants mostly formed intermolecular disulfide bond. All these mutants showed increased thermal stability compared to that of Fab without intermolecular disulfide bond. In the other mutants, the intermolecular disulfide bond could not be completely formed, and the L132C(H):F118C(L) mutant showed only a slight decrease in binding activity and ß-helix content, owing to the exertion of adverse intermolecular disulfide bond effects. Thus, our comprehensive analysis reveals that the introduction of intermolecular disulfide bond in the Fab's constant domain is possible at various locations. These findings provide important insights for accomplishing human Fab stabilization.

Abolition of aggregation of CH2 domain of human IgG1 when combining glycosylation and protein stabilization.

The CH2 domain is a critical element of the human Immunoglobulin G (IgG) constant region. Although the CH2 domain is the least stable domain in IgG, it is also a promising scaffold candidate for developing novel therapeutic approaches. Recently, we succeeded in preparing glycosylated and non-glycosylated CH2 domain in the host organism Pichia pastoris. Herein, we verified that glycosylation of the CH2 domain decreased both, its tendency to aggregate and its immunogenicity in mice, suggesting that aggregation and immunogenicity are related. In addition, we have produced in P. pastoris a stabilized version of the CH2 domain with and without glycan, and their propensity to aggregate evaluated. We found that stabilization alone significantly decreased the aggregation of the CH2 domain. Moreover, the combination of glycosylation and stabilization completely suppressed its aggregation behavior. Since protein aggregation is related to immunogenicity, the combination of glycosylation and stabilization to eliminate the aggregation behavior of a protein could be a fruitful strategy to generate promising immunoglobulin scaffolds.

High-level expression of human CH2 domain from the Fc region in Pichia pastoris and preparation of anti-CH2 antibodies.

Pichia pastoris is a popular eukaryotic system employed for the fast, simple and inexpensive production of recombinant protein including biotherapeutics such as human albumin. The CH2 domain of human Immunoglobulin G (IgG) is a promising scaffold for developing novel therapeutics. To accelerate the research of CH2 domain, we have established a procedure to highly express human CH2 domain (∼150 mg/l) as well as human Fc (∼30 mg/l) in yeast P. pastoris. The procedure yields, simultaneously, a major glycosylated (∼70%) and non-glycosylated (∼30%) fractions. They can be easily separated with high purity. Although both forms of CH2 domain have essentially the same secondary structure, the presence of the glycan increased the thermal stability of the CH2 domain by about 5°C as determined from calorimetry. The purified glycosylated CH2 domain elicited polyclonal antibodies in mouse, recognizing not only the CH2 domain, but also recombinant human Fc and the commercial IgG1 antibody Rituxan. Protein A and Protein G binding to the kink region between CH2 domain and CH3 domain of human Fc are used to purify therapeutic proteins. Therefore, these antibodies are candidates to develop a novel affinity material to purify human antibodies using their CH2 domain.

Optimization of SARS-CoV-2 Spike Protein Expression in the Silkworm and Induction of Efficient Protective Immunity by Inoculation With Alum Adjuvants.

The newly emerged severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is causing a spread of coronavirus disease 2019 (COVID-19) globally. In order to end the COVID-19 pandemic, an effective vaccine against SARS-CoV-2 must be produced at low cost and disseminated worldwide. The spike (S) protein of coronaviruses plays a pivotal role in the infection to host cells. Therefore, targeting the S protein is one of the most rational approaches in developing vaccines and therapeutic agents. In this study, we optimized the expression of secreted trimerized S protein of SARS-CoV-2 using a silkworm-baculovirus expression vector system and evaluated its immunogenicity in mice. The results showed that the S protein forming the trimeric structure was the most stable when the chicken cartilage matrix protein was used as the trimeric motif and could be purified in large amounts from the serum of silkworm larvae. The purified S protein efficiently induced antigen-specific antibodies in mouse serum without adjuvant, but its ability to induce neutralizing antibodies was low. After examining several adjuvants, the use of Alum adjuvant was the most effective in inducing strong neutralizing antibody induction. We also examined the adjuvant effect of paramylon from Euglena gracilis when administered with the S protein. Our results highlight the effectiveness and suitable construct design of the S protein produced in silkworms for the subunit vaccine development against SARS-CoV-2.