Diffusion tensor imaging (DTI) of human lower leg muscles: correlation between DTI parameters and muscle power with different ankle positions.

PURPOSE: To compare diffusion tensor imaging (DTI) parameters in healthy adult human lower leg muscles and to determine the correlation between DTI parameters and muscle power measurements among different types of muscle contraction. MATERIALS AND METHODS: DTI measurements of the unilateral lower leg muscles having three different types of contraction (non-contraction state, isometric contraction, and soleus shortening) were obtained from 10 healthy adults using a 3-T MRI scanner. DTI parameters (λ1, λ2, λ3, mean diffusivity, and fractional anisotropy) were calculated. The values of the DTI parameters and correlation between the DTI parameters and muscle power measurements (maximum power and maximum amount of work) obtained from a dynamometer were statistically compared among the different types of contraction. Intra- and inter-class correlation coefficients were calculated for analysis of reproducibility. RESULTS: The λ1, λ2, λ3, and mean diffusivity of the soleus muscle are significantly lower in the non-contraction state as compared with isometric contraction and soleus shortening (p < 0.05). A positive correlation of the soleus muscle in the non-contraction state was seen between the maximum power and the λ1, λ2, and mean diffusivity. There was a positive correlation between the maximum amount of work and fractional anisotropy in the non-contraction state for the soleus muscle. A negative correlation for the tibialis anterior muscle in the non-contraction state was seen between the maximum amount of work and fractional anisotropy. Overall reproducibility of the DTI parameters was excellent. CONCLUSIONS: DTI parameters were significantly changed depending on the ankle joint position and type of muscle contraction.

Evaluation of sodium orthovanadate as a radioprotective agent under total-body irradiation and partial-body irradiation conditions in mice.

PURPOSE: Our previous study indicated that sodium orthovanadate (vanadate), a strong inhibitor of p53, effectively suppressed the lethality from the hematopoietic (HP) and gastrointestinal (GI) syndromes after 12 Gy total-body irradiation (TBI) in mice. This conclusion, however, was inconsistent with the fact that p53 plays a radioprotective role in the intestinal epithelium. The death after TBI of around 12 Gy was attributed to a combined effect of HP and GI syndromes. To verify the effect from prophylactic administration of p53 inhibitor on protection of HP and GI syndromes, in this study, the radioprotective effects from vanadate were investigated in TBI and lower half-body irradiation (partial-body irradiation: PBI) mouse models. METHODS: Female ICR mice were given a single injection of vanadate or vehicle, followed by a lethal dose of TBI or PBI. Radioprotective effects of vanadate against the irradiations were evaluated by analyzing survival rate, body weight, hematopoietic parameters, and histological changes in the bone marrow and intestinal epithelium. RESULTS: TBI-induced HP syndrome was effectively suppressed by vanadate treatment. After TBI, the vanadate-treated mice retained better bone marrow cellularity and showed markedly higher survival rate compared to the vehicle-treated animals. In contrast, vanadate did not relieve loss of intestinal crypts and failed to rescue mice from GI death after PBI. CONCLUSION: Vanadate is a p53 inhibitor that has been shown to be beneficial as a radiation protective agent against HP but was not effective in protecting against acute GI radiation injury.

Automatic segmentation of airway tree based on local intensity filter and machine learning technique in 3D chest CT volume.

PURPOSE: Airway segmentation plays an important role in analyzing chest computed tomography (CT) volumes for computerized lung cancer detection, emphysema diagnosis and pre- and intra-operative bronchoscope navigation. However, obtaining a complete 3D airway tree structure from a CT volume is quite a challenging task. Several researchers have proposed automated airway segmentation algorithms basically based on region growing and machine learning techniques. However, these methods fail to detect the peripheral bronchial branches, which results in a large amount of leakage. This paper presents a novel approach for more accurate extraction of the complex airway tree. METHODS: This proposed segmentation method is composed of three steps. First, Hessian analysis is utilized to enhance the tube-like structure in CT volumes; then, an adaptive multiscale cavity enhancement filter is employed to detect the cavity-like structure with different radii. In the second step, support vector machine learning will be utilized to remove the false positive (FP) regions from the result obtained in the previous step. Finally, the graph-cut algorithm is used to refine the candidate voxels to form an integrated airway tree. RESULTS: A test dataset including 50 standard-dose chest CT volumes was used for evaluating our proposed method. The average extraction rate was about 79.1 % with the significantly decreased FP rate. CONCLUSION: A new method of airway segmentation based on local intensity structure and machine learning technique was developed. The method was shown to be feasible for airway segmentation in a computer-aided diagnosis system for a lung and bronchoscope guidance system.

Simple noise reduction for diffusion weighted images.

Our purpose in this study was to reduce the noise in order to improve the SNR of Dw images with high b-value by using two correction schemes. This study was performed with use of phantoms made from water and sucrose at different concentrations, which were 10, 30, and 50 weight percent (wt%). In noise reduction for Dw imaging of the phantoms, we compared two correction schemes that are based on the Rician distribution and the Gaussian distribution. The highest error values for each concentration with use of the Rician distribution scheme were 7.3 % for 10 wt%, 2.4 % for 30 wt%, and 0.1 % for 50 wt%. The highest error values for each concentration with use of the Gaussian distribution scheme were 20.3 % for 10 wt%, 11.6 % for 30 wt%, and 3.4 % for 50 wt%. In Dw imaging, the noise reduction makes it possible to apply the correction scheme of Rician distribution.

Experience of low volume split-dose bowel preparation for computed tomography colonography.

We propose a new preparation method for the computed tomography colonography (CTC). This method consists of giving a small volume (400 ml) of cleansing solution on the day before the examination and the same volume of solution on the day of the examination [low volume split-dose (LVSD) method]. Using this method, we compared the volume of residual fluid in the colon, the CT value of the residual fluid, and the quality of stool tagging with those for patients undergoing the conventional bowel preparation method. Polyp detectability of the CTC using this method and the acceptability of the preparation were also investigated. The volume of residual fluid in the colon with this method was smaller than that with the conventional method. The CT value of the residual fluid with this method was higher than that with the conventional method. Visual assessment of the quality of stool tagging with this method gave similar results to those obtained using the conventional method. The sensitivities were 95% for 5-10 mm polyps and 100% for polyps larger than 10 mm. The PPVs were 91% for 5-10 mm polyps and 100% for polyps larger than 10 mm. These results appear to be as good as in previous reports. In the questionnaires, about 80% of the answers were favorable regarding the volume and the taste of laxative. We conclude that LVSD bowel preparation method for CTC maintains polyp detectability and is better tolerated.

[Development of cloud chamber having thin-film entrance windows and proposal of practical training for beginners using X-ray equipment and unsealed radioactive material].

A cloud chamber is a detector that can visualize the tracks of charged particles. Hayashi, et al. suggested a visualization experiment in which X-rays generated by diagnostic X-ray equipment were directed into a cloud chamber; however, there was a problem in that the wall of the cloud chamber scattered the incoming X-rays. In this study, we developed a new cloud chamber with entrance windows. Because these windows are made of thin film, we were able to direct the X-rays through them without contamination by scattered X-rays from the cloud chamber wall. We have newly proposed an experiment in which beta-particles emitted from radioisotopes are directed into a cloud chamber. We place shielding material in the cloud chamber and visualize the various shielding effects seen with the material positioned in different ways. During the experiment, electrons scattered in the air were measured quantitatively using GM counters. We explained the physical phenomena in the cloud chamber using Monte Carlo simulation code EGS5. Because electrons follow a tortuous path in air, the shielding material must be placed appropriately to be able to effectively block their emissions. Visualization of the tracks of charged particles in this experiment proved effective for instructing not only trainee radiological technologists but also different types of healthcare professionals.

[Proposal of a cloud chamber experiment using diagnostic X-ray apparatus and an analysis assisted by a simulation code].

A cloud chamber is a radiation detector that can visualize the tracks of charged particles. In this study, we developed a middle-type cloud chamber for use in practical training using a diagnostic X-ray apparatus. Because our cloud chamber has a heater to vaporize ethanol and features antifogging glass, it is possible to observe the vapor trails for a long time without the need for fine adjustments. X-rays with a tube voltage of 40 kV or of 120 kV (with a 21-mm aluminum filter) were irradiated at the chamber and the various phenomena were observed. We explain these phenomena in terms of the range of electrons and/or interactions between X-rays and matter and conclude that our analysis is consistent with analysis using the Monte Carlo simulation code EGS5.

Usefulness of transcatheter arterial embolization prior to excision of hypervascular musculoskeletal tumors.

The objective of this study was to evaluate the usefulness of transcatheter arterial embolization prior to surgical excision of musculoskeletal tumors. We reviewed the records of nine patients (3 females and 6 males) who received arterial embolization prior to excision of musculoskeletal tumors in our hospital from December 2009 to April 2010. We evaluated tumor region, size, histopathology, feeding artery, embolic material, and blood loss during surgery. We compared the actual amount of intraoperative bleeding with arterial embolization to estimated amounts of bleeding without embolization predicted by three orthopedic surgeons. Arterial embolization was performed on the same day or within 5 days before surgery. Operations were performed as planned in all patients without serious complications. The amount of intraoperative bleeding was 35-4200 mL and there was significantly less bleeding with arterial embolization compared with the estimated amounts (p<0.01). Our results show that arterial embolization prior to resection of hypervascular musculoskeletal tumors reduces the amount of bleeding during surgery and contributes to patient safety.

Gender disparities in the association between epicardial adipose tissue volume and coronary atherosclerosis: a 3-dimensional cardiac computed tomography imaging study in Japanese subjects.

BACKGROUND: Growing evidence suggests that epicardial adipose tissue (EAT) may contribute to the development of coronary artery disease (CAD). In this study, we explored gender disparities in EAT volume (EATV) and its impact on coronary atherosclerosis. METHODS: The study population consisted of 90 consecutive subjects (age: 63 ± 12 years; men: 47, women: 43) who underwent 256-slice multi-detector computed tomography (MDCT) coronary angiography. EATV was measured as the sum of cross-sectional epicardial fat area on CT images, from the lower surface of the left pulmonary artery origin to the apex. Subjects were segregated into the CAD group (coronary luminal narrowing > 50%) and non-CAD group. RESULTS: EATV/body surface area (BSA) was higher among men in the CAD group than in the non-CAD group (62 ± 13 vs. 33 ± 10 cm3/m2, p < 0.0001), but did not differ significantly among women in the 2 groups (49 ± 18 vs. 42 ± 9 cm3/m2, not significant). Multivariate logistic analysis showed that EATV/BSA was the single predictor for >50% coronary luminal narrowing in men (p < 0.0001). Predictors excluded were age, body mass index, hypertension, diabetes mellitus, and hyperlipidemia. CONCLUSIONS: Increased EATV is strongly associated with coronary atherosclerosis in men.

Using the MDCT thick slab MinIP method for the follow-up of pulmonary emphysema.

PURPOSE: The purpose of this study was to evaluate the usefulness of thick slab minimum intensity projection (MinIP) as a follow-up method in patients with pulmonary emphysema. This method was used to determine the presence or absence of changes over time in the lung field based on multi-detector-row CT (MDCT) data. METHODS: Among patients diagnosed with pulmonary emphysema who underwent 16-MDCT (slice thickness, 1 mm) twice at an interval of 6 months or more, 12 patients without changes in the lung field and 14 with clear changes in the lung field were selected as subjects. An image interpretation experiment was performed by five image interpreters. Pulmonary emphysema was followed up using two types of thick slab MinIP (thick slab MinIP 1 and 2) and multi-planar reformation (MPR), and the results of image interpretation were evaluated by receiver operating characteristic (ROC) analysis. In addition, the time required for image interpretation was compared among the three follow-up methods. RESULTS: The area under the ROC curve (Az) was 0.794 for thick slab MinIP 1, 0.778 for the thick slab MinIP 2, and 0.759 for MPR, showing no significant differences among the three methods. Individual differences in each item were significantly more marked for MPR than for thick slab MinIP. The time required for image interpretation was around 18 seconds for thick slab MinIP 1, 11 seconds for thick slab MinIP 2, and approximately 127 seconds for MPR, showing significant differences among the three methods. CONCLUSION: There were no significant differences in the results of image interpretation regarding the presence or absence of changes in the lung fields between thick slab MinIP and MPR. However, thick slab MinIP showed a shorter image interpretation time and smaller individual differences in the results among image interpreters than MPR, suggesting the usefulness of this method for determining the presence or absence of changes with time in the lung fields of patients with pulmonary emphysema.

Measurements of multidetector CT surface dose distributions using a film dosimeter and chest phantom.

PURPOSE: This paper uses film dosimetry to investigate the relationship between multiple scan parameters of multidetector CT with automatic exposure control (AEC) and the surface dose distribution produced on a chest phantom. METHODS: The characteristics of the film used in the film dosimeter were evaluated with regard to linearity, relative film response, and directional dependence. Measurements with an ionization chamber dosimeter and a water phantom were used to evaluate the accuracy of the film dosimeter measurements and to validate the dose profile measurements while changing the tube current, detector dimensions and pitch. When using AEC, the surface dose distribution on the chest phantom was analyzed while changing the detector dimensions and pitch. RESULTS: The linearity, relative film response, and directional dependence of the film were established. The measurement difference between the film dosimeter and ionization chamber dosimeter was within +/- 5% and the dose profile measurement results were validated. It was found that the surface dose distribution changed helically in the direction of the body axis depending on the scan parameters and the phantom. CONCLUSIONS: Using a film dosimeter, the relationship between various multidetector CT scan parameters and the surface dose distribution on a chest phantom was investigated and clarified.

Radiographic comparison between male and female patients with lumbar spondylolysis.

We studied the lumbar spines of 117 adults (39 women and 78 men) with spondylolysis unrelated to low back pain using multidetector computed tomography (CT). Of the 117 subjects with spondylolysis, including five with multiple-level spondylolysis, there were 124 vertebrae with spondylolysis. In adult lumbar spines with unilateral spondylolysis, there was no significant difference between the incidence of spondylolisthesis in female and male subjects. However, in those with bilateral spondylolysis, there was a significantly higher incidence of spondylolisthesis in female subjects (90.9%) than in males (66.2%). Furthermore, females with bilateral spondylolysis had significant more slippage than males. Lumbar index and lumbar lordosis were not significantly different between male and female subjects, and did not significantly correlate with slippage. In conclusion, to treat acute spondylolysis in adolescents, it is important to obtain bony union at least unilaterally, especially in female subjects, to prevent further slippage.

Postprocessing technique with MDCT data improves the accuracy of the detection of lung nodules.

PURPOSE: The aim of this study was to determine whether postprocessing techniques could improve the accuracy of detecting lung nodules. MATERIALS AND METHODS: A total of 154 segmented lung volumes of multidetector-row computed tomography (MDCT) data were the subject of the study. Lung nodules were present in 88 volumes and absent in 66 volumes. We prepared four groups: (1) 7- or 10-mm thick-section axial images; (2) 1-mm thin-section axial images; (3) sliding slab maximum intensity projection (MIP) images with a slab thickness of 15 mm; and (4) sliding slab volume rendering (VR) images with a slab thickness of 15 mm. Sixteen physicians reviewed each group in interactive cine mode. The observers' performance in the detection of lung nodule was evaluated by receiver operating characteristic (ROC) analysis. RESULTS: The observers' performance of the MIP and VR groups was significantly better than in other two groups. There was no significant difference statistically between the thin and thick groups. CONCLUSION: The detectability of lung nodules is improved with the use of sliding slab MIP and VR using thin-section image data. Thin-section volume data are essential for improving diagnostic accuracy, but observation of thin-section images without utilization of image-processing techniques dose not improve diagnostic accuracy.

Three-dimensional imaging of thoracic diseases with multi-detector row CT.

The benefits of multi-detector row CT (MDCT) relative to single-detector row helical CT are considerable. Multi-detector row CT allows shorter acquisition times, greater coverage, and superior image resolution. These factors substantially increase the diagnostic accuracy of the examination. Three-dimensional (3D) volume data from MDCT provides various unique applications on thoracic diseases. These includes isotropic viewings, use of multiplanar reformation (MPR), maximum and minimum intensity projections (MIP and minIP), and volume rendering performed from external and internal perspectives allowing the user to "fly around" and "fly through" the structures. Recent advances in 3D volume rendering put real-time, interactive virtual reality guidance of the procedures such as bronchoscopy and surgery into practice.

Mechanism underlying the prevention of aneurismal rupture by coil embolization.

OBJECT: Endovascular treatment with Guglielmi detachable coil has been developed as a less invasive treatment for cerebral aneurysm. The aim of this study is to clarify the mechanism of the preventive effect of coil embolization. METHOD: Two aneurysm models were employed. One was a T-shaped bifurcation tube with a spherical dome made of glass, which was used for the measurement of pressure and visualization of flow pattern. The other model was a T-shaped glass tube with a spherical elastic silicone dome, which was used for the measurement of aneurismal wall displacement due to pulsation of flow. RESULT: 1, Guglielmi detachable coil caused no change in intra-aneurismal fluid pressure. 2, Coil insertion obstructed and slowed intra-aneurismal flow. This flow stagnation in the aneurysm might promote thrombus formation. 3, With increase in numbers of coils anchored at the intra-aneurismal wall, the displacement of the wall was considerably depressed. This suggests that coil insertion decreases the stress on the aneurismal wall. CONCLUSION: 1, Coil insertion depresses the pulsatile aneurysm wall movement, and diminishes the stress of the aneurysm wall. 2, Coil insertion obstructs intra-aneurismal flow and facilitates thrombus formation in the aneurysm. These two factors may operate synergistically to prevent aneurysm rupture.

Streptomyces avermectinius sp. nov., an avermectin-producing strain.

We propose the establishment of a new species, Streptomyces avermectinius, based on characterization of strain MA-4680(T) and morphological and phylogenetic comparisons with closely related members of the genus Streptomyces. The 16S rDNA sequence was obtained from this strain and used to place it among Streptomyces species using the variable alpha region and the nearly complete 16S rDNA sequence. Four Streptomyces species were selected as related species from phenotypic data, three species from phylogenetic databases on alpha region sequences and two species from phylogenetic data using nearly complete 16S rDNA sequences. Analysis of DNA-DNA hybridization tests distinguished strain MA-4680(T) from these eight Streptomyces species. The type strain is strain MA-4680(T) (= ATCC 31267(T) = NRRL 8165(T)).