RESUMO
Driven by climate change and the need for a more sustainable construction sector, policy is increasingly demanding and promoting timber hybrid construction methods. In the German state of Baden-Württemberg, every new public building has to be of timber or timber hybrid construction (Holzbauoffensive BW). The objective of multi-story buildings with large floor spans can only be achieved in a resource-efficient way by hybrid constructions combining timber and steel components. A research project recently completed at the Karlsruhe Institute of Technology was aimed at the development and systematic investigation of hybrid bending beams in which an advantageous combination of the materials steel and timber is used. For this purpose, steel profiles are integrated into timber cross-sections in a shear-resistant manner by adhesive bonding. As part of the experimental, numerical and analytical investigations, different cross-sections of steel and timber, as well as different construction materials, were considered (GL24h, LVL48p, LVL80p, S355 and S420). The results of large-scale four-point bending tests illustrate the potential of this new hybrid construction method. Depending on the geometry and material combinations tested, the bending stiffness could be increased by up to 250%, and the load-carrying capacity by up to 120%, compared to a glulam beam with identical dimensions.
RESUMO
The paper shows experimental data concerning the bearing capacity of curved profile sheets achieved by roll forming process. Two different restraint configurations were considered, respectively named A and B and representing the only bending and the axial-bending conditions. Two different experimental setup, i.e. single span with and without horizontal restraints were adopted. Trapezoidal and sinusoidal steel sheets with variable thickness and curvature radius were tested. Setup configurations, collapse mechanisms and load-deflection diagrams are presented.