The Effect of Clearance Angle on Tool Life, Cutting Forces, Surface Roughness, and Delamination during Carbon-Fiber-Reinforced Plastic Milling.

This study aimed to investigate the effect of the clearance angle of the milling tool on wear, cutting forces, machined edge roughness, and delamination during non-contiguous milling of carbon-fiber-reinforced plastic (CFRP) composite panels with a twill weave and 90° fiber orientation. To achieve the objective of the study, it was first necessary to design suitable tools (6 mm diameter sintered carbide shank milling cutters) with a variety of clearance angles (8.4°, 12.4°, and 16.4°) and all the machinery and measuring equipment for the research to be carried out. Furthermore, measurement and evaluation methods for cutting tool wear, cutting forces, machined edge roughness, and delamination were developed. Last but not least, the results obtained during the research were summarized and evaluated. From the experiments conducted in this study, it was found that the tool clearance angle has a significant effect on tool wear, roughness of the machined surface, and delamination of the carbon fiber composite board. The tool with a clearance angle of 8.4° wore faster than the tool with a clearance angle of 16.4°. The same trend was observed for cutting force, machined surface roughness, and delamination. In this context, it was also shown that the cutting force increased as the tool wear increased, which in turn increased surface roughness and delamination. These results are of practical significance, not only in terms of the quality of the machined surface but also in terms of time, cost, and energy savings when machining CFRP composite materials.

Multi-seasonal systematic camera-trapping reveals fluctuating densities and high turnover rates of Carpathian lynx on the western edge of its native range.

Camera-trapping and capture-recapture models are the most widely used tools for estimating densities of wild felids that have unique coat patterns, such as Eurasian lynx. However, studies dealing with this species are predominantly on a short-term basis and our knowledge of temporal trends and population persistence is still scarce. By using systematic camera-trapping and spatial capture-recapture models, we estimated lynx densities and evaluated density fluctuations, apparent survival, transition rate and individual's turnover during five consecutive seasons at three different sites situated in the Czech-Slovak-Polish borderland at the periphery of the Western Carpathians. Our density estimates vary between 0.26 and 1.85 lynx/100 km2 suitable habitat and represent the lowest and the highest lynx densities reported from the Carpathians. We recorded 1.5-4.1-fold changes in asynchronous fluctuated densities among all study sites and seasons. Furthermore, we detected high individual's turnover (on average 46.3 ± 8.06% in all independent lynx and 37.6 ± 4.22% in adults) as well as low persistence of adults (only 3 out of 29 individuals detected in all seasons). The overall apparent survival rate was 0.63 ± 0.055 and overall transition rate between sites was 0.03 ± 0.019. Transition rate of males was significantly higher than in females, suggesting male-biased dispersal and female philopatry. Fluctuating densities and high turnover rates, in combination with documented lynx mortality, indicate that the population in our region faces several human-induced mortalities, such as poaching or lynx-vehicle collisions. These factors might restrict population growth and limit the dispersion of lynx to other subsequent areas, thus undermining the favourable conservation status of the Carpathian population. Moreover, our study demonstrates that long-term camera-trapping surveys are needed for evaluation of population trends and for reliable estimates of demographic parameters of wild territorial felids, and can be further used for establishing successful management and conservation measures.

A bacterium-based contact assay for evaluating the quality of solid samples-Results from an international ring-test.

The contact assay measuring the inhibition of Arthrobacter globiformis dehydrogenase activity as an endpoint to evaluate the toxicity of solid samples was tested in an international ring-test to validate its performance for ISO standardization (ISO/CD 18187). This work reports the results of the ring-test involving 9 laboratories from six countries. At least 8 valid data sets were obtained for each sample and more than three quarters of the participants attained the validity criteria defined in the standard. The coefficient of variation within (CVr) and between (CVR) laboratories was generally on average <15% and <30% for negative and positive controls, respectively. Regarding solid samples, the laboratories provided a similar ranking of the samples based on their toxicity, despite some variation in the LOEC values. The logarithmic within-lab standard deviation <0.50 for soils and <0.25 for wastes evidenced a good repeatability. The between-lab variability assessed by a CVR <30%, minimum-maximum factor <4 and a reproducibility standard deviation (SDR) <0.13 for a great part of the solid samples, confirmed the test reproducibility. Overall, this assay proved to be robust, sensitive and feasible for routine use towards the quality assessment of soils and wastes.

Trans-Boundary Edge Effects in the Western Carpathians: The Influence of Hunting on Large Carnivore Occupancy.

The conservation and management of wolves Canis lupus in the periphery of their distribution is challenging. Edges of wolf distribution are characterized by very few and intermittent occurrences of individuals, which are modulated by multiple factors affecting the overall population such as human-caused mortality, management targets and food availability. The knowledge of population dynamics in the edges becomes crucial when hunting takes place nearby the edges, which may preclude population expansion. Here, using as example the occurrence of wolves in the Beskydy Mountains (Czech-Slovak border), which are the edge distribution of the wolf and Eurasian lynx Lynx lynx populations in the West Carpathians, we explored how food availability and hunting in the Slovakian core area affected the dynamics of wolves in the edges of this population. During 2003-2012, we monitored large carnivore occurrence by snow-tracking surveys and tested potential differences in the occurrence of these species in Beskydy Mountains and potential mechanisms behind detected patterns. Despite the proximity to the core area, with several wolf reproductions being confirmed at least in recent years, the wolf was a very rare species in Beskydy and was recorded 14 times less often than the lynx. The expected abundance of wolves in the Beskydy Mountains was inversely related to prey availability in the Slovakian core area. Wolf hunting the year before influenced the expected abundance of wolves in Beskydy area. We discuss how different life histories and legal status of both species probably account for most of the observed difference of occurrence at range margins.

The variability of standard artificial soils: effects on the survival and reproduction of springtail (Folsomia candida) and potworm (Enchytraeus crypticus).

Recent studies have documented significant variability in the basic properties of artificial soil which is used as a standard medium in soil bioassays. Variability in key soil properties could confound the interpretation of toxicity data and bias the output of bioassays. The main aims of this study were (i) to identify the variability in the endpoints survival and reproduction of Folsomia candida and Enchytraeus crypticus related to the artificials soils prepared in different laboratories and (ii) to identify the specific physico-chemical properties of the artificial soils which influence the bioassays results. The results of reproduction tests showed that nearly all tested artificial soils were suitable for the survival and reproduction of both organisms as the validity criteria from the test standards were fulfilled. However, numbers of juveniles varied significantly among soils. The most important factor for F. candida performance was a coarser soil structure. C:N ratio (<22.6) were important for the reproduction of E. crypticus. Both species tolerated a pH (KCl) of artificial soils in the range of 4.27-6.8 and even low TOC (1.5%). Thus, it is possible to reduce peat content in artificial soils, which may increase the comparability of results to those for natural soils.