Exploring the untapped practices in bacterial-fungal mixed-based cultures for acidic treatment of metal-enriched printed circuit board waste.

This study explores the extraction of metals from spent mobile phone printed circuit boards (SMPhPCBs) to address environmental and resource depletion concerns. The challenges in metal recovery from SMPhPCBs arise due to their complex composition and high metal content. While previous research has primarily focused on using bio-cyanide, bio-sulfate, and bio-ferric compounds from acidophilic bacteria, the potential of bio-oxalic acid for SMPhPCBs treatment and the alteration of their complex structure has not yet been explored. Additionally, this study suggests evaluating the untapped potential of Aspergillus niger in oxalic acid production through mixed cultures with bacteria, marking a pioneering approach. A unique culture of Bacillus megaterium and A. niger was created, inducing bio-stress by bacterial metabolites, including gluconic acid (2683 mg/l) and live/dead bacterial cells in a medium with glucose deficiency. Results demonstrated reducing sugar consumption and oxalic acid over-production in mixed cultures compared to pure cultures, ranging from 1350 to 4951 mg/l at an initial glucose concentration (IGC) of 10 g/l and 4276 to 7460 mg/l at IGC 20 g/l. This over-production is attributed to proposed fungal signaling mechanisms to bacteria. Metal extraction using organic acids and siderophores at 10 g/l pulp density, 24 h, and 60 °C yielded Mn (100 %), Pt (100 %), Pd (70.7 %), Fe (50.8 %), Co (48.3 %), Al (21.8 %), among others. The final valuable residue containing copper, gold, and silver holds potential for future recycling. The study concludes with XRD and FTIR analyses to assess the bioleaching effect on the bio-leached powder.

Regulatory-systemic approach in Aspergillus niger for bioleaching improvement by controlling precipitation.

In the context of e-waste recycling by fungal bioleaching, nickel and cobalt precipitate as toxic metals by oxalic acid, whereas organic acids, such as citric, act as a high-performance chelating agent in dissolving these metals. Oxalic acid elimination requires an excess and uneconomical carbon source concentration in culture media. To resolve this issue, a novel and straightforward systems metabolic engineering method was devised to switch metabolic flux from oxalic acid to citric acid. In this technique, the genome-scale metabolic model of Aspergillus niger was applied to predicting flux variability and key reactions through the calculation of multiple optimal solutions for cellular regulation. Accordingly, BRENDA regulators and a novel molecular docking-oriented approach were defined a regulatory medium for this end. Then, ligands were evaluated in fungal culture to assess their impact on organic acid production for bioleaching of copper and nickel from waste telecommunication printed circuit boards. The protein structure of oxaloacetate hydrolase was modeled based on homology modeling for molecular docking. Metformin, glutathione, and sodium fluoride were found to be effective as inhibitors of oxalic acid production, enabling the production of 8100 ppm citric acid by controlling cellular metabolism. Indirect bioleaching demonstrated that nickel did not precipitate, and the bioleaching efficiency of copper and nickel increased from 40% and 24% to 61% and 100%, respectively. Bioleaching efficiency was evaluated qualitatively by FE-SEM, EDX, mapping, and XRD analysis. KEY POINTS: • A regulatory-systemic procedure for controlling cellular metabolism was introduced • Metformin inhibited oxalic acid, leading to 8100 ppm citric acid production • Bioleaching of copper and nickel in TPCBs improved by 21% and 76.

Structural study and metal speciation assessments of waste PCBs and environmental implications: Outlooks for choosing efficient recycling routes.

Environmental protection from risks and disposal management of discarded mobile phone printed circuit boards (MPhPCBs) is a global issue. Although recycling is proposed as a solution, it is challenging to choose a sustainable method due to the insufficient recognition from extreme structural heterogeneity of these wastes based on their types. To this end, a thorough study on the structural characterization of PCBs using different analyses and metal speciation by sequential extraction procedure were performed. Understanding these information is an essential step in order to choose efficient methods to maximize selective recycling of metals and minimize environmental implications. PCBs were found to be potent metallic reservoirs after all metal content of PCBs were precisely measured. The structural analysis results of the sample included identification of different phases, functional groups, 45.1 % of the crystalline and 54.9 % of amorphous, the mesoporous nature (pore diameter mean âˆ¼ 7.24 nm), hydrophobic property (contact angle âˆ¼93.4°), the positive ζ-potential of particles at pH < (isoelectric point âˆ¼5.4) and vice versa, and the particle size that were not oversized. The metal speciation outcome indicated over 80 % of the total content of elements such as Si, Sn, Ag, Au, Sr, Al, Cr, Nd, Ca, Ba, and P was in a solid crystal structure/residual fraction, which were hard recycled. The assessment of contamination levels of waste indicated the considerable contamination for the environment at global contamination factor âˆ¼27.7, the moderate ecological risk at potential ecological risk assessment âˆ¼82.9, and threats to public health. In addition, the metals of Pr, Mn, and Zn pose high risks because of their risk assessment code values of 42.7 %, 36.7 %, and 33.1 %, respectively. Leaching tests proved Waste Extraction Test was an aggressive method. ANC4 proposed high level of H+ consumption are required for metal leaching in future works.

Complete bioleaching of Co and Ni from spent batteries by a novel silver ion catalyzed process.

In the present work, bioleaching of two valuable metals of cobalt (Co) and nickel (Ni) from spent lithium-ion batteries (LIBs) of laptop by Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans through a novel adaptation procedure was investigated. Different bioleaching methods including A. ferrooxidans and A. thiooxidans spent medium, A. ferrooxidans one-step and two-step bioleaching were carried out. The effect of silver ion on the bioleaching of Co and Ni in these methods was evaluated. Moreover, a novel strain adaptation approach to the toxic solid content of the battery powder was chosen, which resulted in a very short adaptation time and bioleaching (2 days). Even though silver ion did not have a significant effect on the spent medium method, it had an increasing effect of 26% and 7%, for Co and Ni recovery, respectively, on two-step bioleaching with silver ion-adapted A. ferrooxidans, in gradual addition of the battery powder. The highest extraction results in the spent medium method were 45.2% and 71.5% for Co and Ni, respectively, and a very high extraction yield of 99.95% for these metals was achieved in a short time of only 3 days by two-step bioleaching with gradual addition of the solid content and in the presence of Ag+. KEY POINTS: • Mixed spent medium of acidophilic bacteria resulted in higher Ni and Co extraction. • Adaptation to Ag+ has enhanced the strain capability for Co and Ni extraction. • With Ag+ presence, Co and Ni extraction reached 99.95% in two-step bioleaching.

Production and physicochemical characterization of bacterial poly gamma- (glutamic acid) to investigate its performance on enhanced oil recovery.

Bacillus licheniformis LMG 7559, which is capable of producing extracellular poly gamma- (glutamic acid) (PGA), was provided for the biopolymer synthesis. Using a modified PGA medium for PGA production, the isolated biopolymer, undergone dialysis process mainly for desalination and removal of other impurities. The bacteria produced high molecular weight biopolymers with a weight average molecular weight (M̅n) of 1.6 × 105 g/mole identified by gel permeation chromatography (GPC). Furthermore, GPC analysis was utilized to determine the poly-dispersity of PGA as well as molecular weight variation by cultivation time. The heavy weight fraction of 1.85 × 105 g/mole with poly-dispersity index of 7.42 was distinguished. For the extracted and dialyzed biopolymer, thermal properties were studied using DSC/TGA by which a mass loss of 36 percent was observed. Eventually, the biopolymer solution was injected into the oil saturated heterogeneous porous medium to evaluate the recovery factor enhancement by PGA flooding. It was found that 31.45% of oil in place was recovered by biopolymer flooding, whereas only 16.6% of oil in place was obtained by water flooding.