Poly(Lactic Acid)/Graphite Nanoplatelet Nanocomposite Filaments for Ligament Scaffolds.

The anterior cruciate ligament (ACL) is one of the most prone to injury in the human body. Due to its insufficient vascularization and low regenerative capacity, surgery is often required when it is ruptured. Most of the current tissue engineering (TE) strategies are based on scaffolds produced with fibers due to the natural ligament's fibrous structure. In the present work, composite filaments based on poly(L-lactic acid) (PLA) reinforced with graphite nanoplatelets (PLA+EG) as received, chemically functionalized (PLA+f-EG), or functionalized and decorated with silver nanoparticles [PLA+((f-EG)+Ag)] were produced by melt mixing, ensuring good filler dispersion. These filaments were produced with diameters of 0.25 mm and 1.75 mm for textile-engineered and 3D-printed ligament scaffolds, respectively. The resulting composite filaments are thermally stable, and the incorporation of graphite increases the stiffness of the composites and decreases the electrical resistivity, as compared to PLA. None of the filaments suffered significant degradation after 27 days. The composite filaments were processed into 3D scaffolds with finely controlled dimensions and porosity by textile-engineered and additive fabrication techniques, demonstrating their potential for ligament TE applications.

3D-printed cryomilled poly(ε-caprolactone)/graphene composite scaffolds for bone tissue regeneration.

In this study, composite scaffolds based on poly(caprolactone) (PCL) and non-covalently functionalized few-layer graphene (FLG) were manufactured by an extrusion-based system for the first time. For that, functionalized FLG powder was obtained through the evaporation of a functionalized FLG aqueous suspension prepared from a graphite precursor. Cryomilling was shown to be an efficient mixing method, producing a homogeneous dispersion of FLG particles onto the PCL polymeric matrix. Thereafter, fused deposition modeling (FDM) was used to print 3D scaffolds and their morphology, thermal, biodegradability, mechanical, and cytotoxicity properties were analysed. The presence of functionalized FLG demonstrated to induce slight changes in the microstructure of the scaffold, did not affect the thermal stability and enhanced significantly the compressive modulus. The composite scaffolds presented a porosity of around 40% and a mean pore size in the range of 300 µm. The cell viability and proliferation of SaOs-2 cells were assessed and the results showed good cell viability and long-term proliferation onto produced composite scaffolds. Therefore, these new FLG/PCL scaffolds comprised adequate morphological, thermal, mechanical, and biological properties to be used in bone tissue regeneration.

Erratum: Moreira, J., et al., Spin-Coated Polysaccharide-Based Multilayered Freestanding Films with Adhesive and Bioactive Moieties. Molecules 2020, 25, 840.

The authors wish to make changes to the published paper [...].

Spin-Coated Polysaccharide-Based Multilayered Freestanding Films with Adhesive and Bioactive Moieties.

Freestanding films based on catechol functionalized chitosan (CHI), hyaluronic acid (HA), and bioglass nanoparticles (BGNPs) were developed by spin-coating layer-by-layer assembly (SA-LbL). The catechol groups of 3,4-dihydroxy-l-phenylalanine (DOPA) present in the marine mussels adhesive proteins (MAPs) are the main factors responsible for their characteristic strong wet adhesion. Then, the produced films were cross-linked with genipin to improve their stability in wet state. Overall, the incorporation of BGNPs resulted in thicker and bioactive films, hydrophilic and rougher surfaces, reduced swelling, higher weight loss, and lower stiffness. The incorporation of catechol groups onto the films showed a significant increase in the films' adhesion and stiffness, lower swelling, and weight loss. Interestingly, a synergetic effect on the stiffness increase was observed upon the combined incorporation of BGNPs with catechol-modified polymers, given that such films were the stiffest. Regarding the biological assays, the films exhibited no negative effects on cellular viability, adhesion, and proliferation, and the BGNPs seemed to promote higher cellular metabolic activity. These bioactive LbL freestanding films combine enhanced adhesion with improved mechanical properties and could find applications in the biomedical field, such as guided hard tissue regeneration membranes.

Layer-by-layer films based on catechol-modified polysaccharides produced by dip- and spin-coating onto different substrates.

Layer-by-layer films based on chitosan and hyaluronic acid were produced by dip- and spin-coating techniques onto glass, 316L stainless steel and titanium. These natural polymers were modified with catechol groups, in order to build coatings with improved adhesive properties. Polymeric coatings were exclusively composed by both modified polymers whereas the multifunctional coatings combined an inorganic phase of bioactive glass nanoparticles with the polymeric layers to confer bioactivity. Ultraviolet-visible spectroscopy demonstrated that both polymers were successfully synthesized. Fourier transform infrared imaging was used as an innovative way to analyze the layer interdiffusion in these coatings. Their morphology was analyzed by scanning electron microscopy and atomic force microscopy, and their wettability was evaluated by water contact angle measurements. Major differences were found in the structure and surface properties of the coatings assembled either by dip- or spin-coating. The spin-coated films onto glass were smoother, with a more homogeneous structure and lower interdiffusion of polyelectrolytes layers, when compared with the dip-coated ones. Furthermore, it was concluded that the intrinsic surface roughness of stainless steel and titanium substrates had great influence on the surface morphology and wettability of the coatings obtained from both layer-by-layer methodologies.

Adhesive Bioactive Coatings Inspired by Sea Life.

Inspired by nature, in particular by the marine mussels adhesive proteins (MAPs) and by the tough brick-and-mortar nacre-like structure, novel multilayered films are prepared in the present work. Organic-inorganic multilayered films, with an architecture similar to nacre based on bioactive glass nanoparticles (BG), chitosan, and hyaluronic acid modified with catechol groups, which are the main components responsible for the outstanding adhesion in MAPs, are developed for the first time. The biomimetic conjugate is prepared by carbodiimide chemistry and analyzed by ultraviolet-visible spectrophotometry. The buildup of the multilayered films is monitored with a quartz crystal microbalance with dissipation monitoring, and their topography is characterized by atomic force microscopy. The mechanical properties reveal that the films containing catechol groups and BG present an enhanced adhesion. Moreover, the bioactivity of the films upon immersion in a simulated body fluid solution is evaluated by scanning electron microscopy coupled with energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. It was found that the constructed films promote the formation of bonelike apatite in vitro. Such multifunctional mussel inspired LbL films, which combine enhanced adhesion and bioactivity, could be potentially used as coatings of a variety of implants for orthopedic applications.

Rheumatoid arthritis bone fragility is associated with upregulation of IL17 and DKK1 gene expression.

Our aim was to compare bone gene expression in rheumatoid arthritis (RA) and primary osteoporosis (OP) patients. Secondary aims were to determine the association of gene expression of the Wnt/ß-catenin signaling pathway with inflammatory cytokines in the bone microenvironment and to assess the serum levels of Wnt/ß-catenin proteins in both groups. RA patients referred for hip replacement surgery were recruited. Primary OP patients were used as controls. Gene expression of Wnt pathway mediators, matrix proteins, and pro-inflammatory cytokines were analyzed in bone samples. Bone turnover markers, inflammatory cytokines, and Wnt mediators were measured in serum. Twenty-two patients were included: 10 with RA and 12 with primary OP. The expressions of Wnt10b (p = 0.034), its co-receptor LRP6 (p = 0.041), and its negative regulator DKK1 (p = 0.008) were upregulated in RA bone. IL17 gene expression in bone was upregulated in RA patients (p = 0.031) and correlated positively with Wnt10b (r = 0.810, p = 0.015), DKK2 (r = 0.800, p = 0.010), and RANKL/OPG ratio (r = 0.762, p = 0.028). DKK2 (p = 0.04) was significantly decreased in RA serum compared with primary OP. In conclusion, bone fragility in RA patients is induced by an unbalanced bone microenvironment and is associated with a specific gene expression pattern, namely, the upregulation of IL17 and DKK1, suggesting that the modulation of these two pathways might prevent RA systemic bone loss.

At the moment of occurrence of a fragility hip fracture, men have higher mechanical properties values in comparison with women.

BACKGROUND: It is well established that males have lower fracture risk in comparison with females, which suggests a higher bone resistance in men. The aim of our study was to find out if in older patients with hip fragility fractures, gender has also an impact on trabecular bone material behaviour, specifically to determine whether trabecular mechanical properties under compressive loading differ between men and women who suffered a fragility hip fracture. METHODS: Femoral epiphyses were consecutively collected during hip replacement surgery due to proximal femur fragility fracture. Trabecular bone cylinders were drilled and submitted to uniaxial compression tests and mechanical properties were assessed. RESULTS: Seventy-three patients, 55 women (mean age 81 years and standard deviation of 7 years) and 18 men (mean age 81 years and standard deviation of 8 years) were evaluated. The ultimate stress of trabecular bone was significantly higher in men than in women: the median values and the interquartile range (IQR) were respectively 8.04(5.35-10.90) MPa vs. 4.46(3.02-7.73) MPa, (p-value = 0.005). The same difference between male and female was observed in the Young's modulus: 293.68(166.67-538.18) MPa vs. 174.26(73.07-322.28) MPa, (p-value = 0.028), and also in the energy to failure: 0.25(0.07-0.42) MJ/m³ vs. 0.11(0.05-0.25) MJ/m³, (p-value = 0.058). These differences were also verified after adjusting the analysis for age in a multivariate model analysis. CONCLUSIONS: Our observations demonstrated that, even in a population who suffered a fragility hip fracture, men still have higher trabecular bone mechanical properties in comparison with women.

Effect of the strain rate on the twisting of trabecular bone from women with hip fracture.

As one of the major functions of bone is to provide structural support for the musculoskeletal system, it is important to evaluate its mechanical strength. Bones may be subjected to multiaxial stresses due to bone pathologies, accidental loads which may lead to hip, wrist fracture, or to a prosthetic joint replacement. Twist loading may lead to fractures, especially involving long bones from lower limbs. The aim of this work was to study the effect of the strain rate on the shear properties of trabecular bone samples from women with hip fracture (from 65 to 100 years). Cylindrical samples were core drilled from human femoral heads along the primary trabecular direction. The cylinder's ends were polished and embedded in blocks of polymeric material which fit the grips of the testing device. Deformation rates of 0.005, 0.01, 0.015, and 0.05 s⁻¹ were applied. Twisting tests were conducted with or without an applied axial load of 500 N. From the torque-angular displacement curves, the shear stress-strain curves were obtained. The maximum shear strength and the shear modulus (i.e. the slope of the linear region) were determined. A large scatter of the results of the shear strength and the shear modulus was found, which is probably related to the heterogeneity of nonhealthy human bone samples. There is no significant effect of the strain rate on the maximum shear stress and the shear modulus, either in tests undertaken with or without the application of an axial load. The effect of strain rate on nonhealthy bone trabecular twisting properties did not follow the trend observed on the effect of strain rate in healthy bone, where an increase is detected.

Antifungal activity of dental resins containing amphotericin B-conjugated nanoparticles.

OBJECTIVES: To evaluate the antifungal activity, biocompatibility and mechanical properties of dental resins containing silica nanoparticles functionalized with amphotericin B (SNP-DexOxAmB) against five species of Candida. METHODS: Dental resin composites (Spectrum, Dentsply DeTrey, GmbH, Germany) having 2% (w/w) of SNP-DexOxAmB (SNPs of 5 and 80nm, denoted as SNP5 and SNP80) were aged for 10, 20 and 30 days at 37°C, in phosphate buffer saline buffer pH 7.4 (PBS). At different time, the antifungal activity was evaluated by a direct contact assay against 1×10(4)cells of Candida. The biocompatibility of the resins was tested against human fibroblasts, endothelial cells and red blood cells. RESULTS: Dental resins containing SNP5-DexOxAmB have high (1×10(4)cells killed in 5h by ∼70mg of dental resin composite containing 2% (w/w) of SNP-DexOxAmB) and durable (for at least 1 month) antifungal activity against five strains of Candida. The incorporation of the nanoparticles (NPs) had no significant change in the mechanical properties of the resin, specifically the flexural strength and modulus. Our results further show that the antifungal activity is mainly mediated by direct contact and not by leaching of NPs from the resin. Resins incorporating SNP5-DexOxAmB have longer-term antifungal activity than SNP80-DexOxAmB. The antimicrobial activity of resins with SNP5-DexOxAmB persists after 4 cycles of re-use and it is superior to the activity obtained for dental resins containing silver NPs. In addition, dental resins incorporating SNP5-DexOxAmB are non-cytotoxic against human skin fibroblasts and human umbilical vein endothelial cells, and non-hemolytic against human red blood cells. SIGNIFICANCE: The incorporation of SNP5-DexOxAmB in dental resins resulted in a non-cytotoxic composite with high and durable antifungal activity.

Low osteocalcin/collagen type I bone gene expression ratio is associated with hip fragility fractures.

INTRODUCTION: Osteocalcin (OC) is the most abundant non-collagenous bone protein and is determinant for bone mineralization. We aimed to compare OC bone expression and serum factors related to its carboxylation in hip fragility fracture and osteoarthritis patients. We also aimed to identify which of these factors were associated with worse mechanical behavior and with the hip fracture event. METHODS: In this case-control study, fragility fracture patients submitted to hip replacement surgery were evaluated and compared to a group of osteoarthritis patients submitted to the same procedure. Fasting blood samples were collected to assess apolipoproteinE (apoE) levels, total OC and undercarboxylated osteocalcin (ucOC), vitamin K, LDL cholesterol, triglycerides and bone turnover markers. The frequency of the apoε4 isoform was determined. Femoral epiphyses were collected and trabecular bone cylinders drilled in order to perform compression mechanical tests. Gene expression of bone matrix components was assessed by quantitative RT-PCR analysis. RESULTS: 64 patients, 25 submitted to hip replacement surgery due to fragility fracture and 39 due to osteoarthritis, were evaluated. Bone OC/collagen expression (OC/COL1A1) ratio was significantly lower in hip fracture compared to osteoarthritis patients (p<0.017) adjusted for age, gender and body mass index. Moreover, OC/COL1A1 expression ratio was associated with the hip fracture event (OR ~0; p=0.003) independently of the group assigned, or the clinical characteristics. Apoε4 isoform was more frequent in the hip fracture group (p=0.029). ucOC levels were higher in the fracture group although not significantly (p=0.058). No differences were found regarding total OC (p=0.602), apoE (p=0.467) and Vitamin K (p=0.371). In hip fracture patients, multivariate analysis, adjusted for clinical characteristics, serum factors related to OC metabolism and gene expression of bone matrix proteins showed that low OC/COL1A1 expression ratio was significantly associated with worse trabecular strength (ß=0.607; p=0.013) and stiffness (ß=0.693; p=0.003). No association was found between ucOC and bone mechanics. Moreover, in osteoarthritis patients, the multivariate analysis revealed that serum total OC was negatively associated with strength (ß=-0.411; p=0.030) and stiffness (ß=-0.487; p=0.009). CONCLUSION: We demonstrated that low bone OC/COL1A1 expression ratio was an independent predictor of worse trabecular mechanical behavior and of the hip fracture event. These findings suggest that in hip fracture patients the imbalance of bone OC/COL1A1 expression ratio reflects disturbances in osteoblast activity leading to bone fragility.