RESUMO
The redox properties of the actinides in aqueous solution are important for fuel production/reprocessing and understanding the environmental impact of nuclear waste. The redox potentials for U, Np, Pu, and Am in oxidation states from 0 up to VII (as appropriate) in aqueous solutions have been predicted at the density functional theory level with the B3LYP functional, Stuttgart small core pseudopotential basis sets for the actinides, and explicit (30H2O molecules)/implicit treatment of the aqueous solvent using the self-consistent reaction field COSMO and SMD approaches for the implicit solvation. The predictions of the structural parameters of clusters incorporating first and second solvation shells are consistent with the available experimental data. Our results are typically within 0.2 V of the available experimental data using two explicit solvation shells with an implicit solvent model. The use of the PW91 functional substantially improved the prediction of the Pu(VI/V) redox couple. The redox couples for An(VI/IV) and An(V/IV) which involve the addition of protons and removal of the actinyl oxygens led to slightly larger differences from an experiment. The An(IV/0) and An(III/0) couples were reliably predicted with our approach. Predictions of the unknown An(II/I) redox potentials were negative, consistent with expectations, and predictions for unknown An(VII/VI), An(III/II), and An(II/0) redox couples improve prior estimates.
RESUMO
The ligand binding energies (LBEs) of N-heterocyclic carbenes (NHCs) and CH2 and CF2 adducts with group 1, 2, 10, and 11 metals and complexes with metals from these groups are predicted at the coupled cluster CCSD(T) level of theory by using density functional theory optimized geometries. The differences in LBEs as a function of the metal and the types of bonding interactions as well as the type of carbene are described. The bonding between the alkali cations and alkaline earth dications is predominantly ionic with a linear correlation between the LBEs and the cation hardness. In contrast, the bonding behaviors of the group 10 and 11 metals and metal complexes have only a weak, indirect correlation between the LBEs and the metal hardness. The difference in bonding behavior between the groups of metals arises due to the accessibility of electron donation between the ligand and the metal in the transition metal complexes, which results in more covalent-like bonding behavior. The presence of the methyl groups on the NHC nitrogen results in only slightly more delocalized charge from the metal onto the ring, but there is significant redistribution of the charge on the ring. Saturation of the NHC ring had a much smaller effect on how the charge was distributed on the ring. The analysis of the bonding behavior of NHCs with various metal groups enables improved understanding of carbene-metal interactions to inform rational design of NHC-based systems.
RESUMO
The energetics of the hydrolysis reactions for high oxidation states of the dimeric actinide species Th2IVO4, Pa2VO5, and U2VIO6 were calculated at the CCSD(T) level and those for triplet Np2VIO6 at the B3LYP level. Hydrolysis is initiated by the formation of a Lewis acid/base adduct with H2O (physisorbed product), followed by a proton transfer to form a dihydroxide molecule (chemisorbed product); this process was repeated until the initial actinide oxide is fully hydrolyzed. For Th2O4, hydrolysis (chemisorption) by the initial and subsequent H2O molecules prefers proton transfer to terminal oxo groups before the bridge oxo groups. The overall Th2O4 hydration pathway is exothermic with chemisorbed products preferred over the physisorption products, and the fully hydrolyzed Th2(OH)8 can form exothermically. Hydrolysis of Pa2O5 forms isomers of similar energies with no initial preference for bridge or terminal hydroxy groups. The most exothermic hydrolysis product for Pa is Pa2O(OH)8 and the most stable species is Pa2O(OH)8(H2O). Hydrolysis of U2O6 and Np2O6 with strong [OâAnâO]2+ actinyl groups occurs first at the bridging oxygens rather than at the terminal oxo groups. The U2O6 and Np2O6 pathways predict hydrated products to be more favored than hydrolyzed products, as more H2O molecules are added. The stability of the U and Np clusters is predicted to decrease with increasing number of hydroxyl groups. The most stable species on the hydration reaction coordinate for U and Np is An2O3(OH)6(H2O).
RESUMO
The purely chemical synthesis of fluorine is a spectacular reaction which for more than a century had been believed to be impossible. In 1986, it was finally experimentally achieved, but since then this important reaction has not been further studied and its detailed mechanism had been a mystery. The known thermal stability of MnF4 casts serious doubts on the originally proposed hypothesis that MnF4 is thermodynamically unstable and decomposes spontaneously to a lower manganese fluoride and F2 . This apparent discrepancy has now been resolved experimentally and by electronic structure calculations. It is shown that the reductive elimination of F2 requires a large excess of SbF5 and occurs in the last reaction step when in the intermediate [SbF6 ][MnF2 ][Sb2 F11 ] the addition of one more SbF5 molecule to the [SbF6 ]- anion generates a second tridentate [Sb2 F11 ]- anion. The two tridentate [Sb2 F11 ]- anions then provide six fluorine bridges to the Mn atom thereby facilitating the reductive elimination of the two fluorine ligands as F2 .
RESUMO
Dehydration and dehydrogenation of an ethanol molecule on (TiO2)n, n = 2-4, nanoclusters were studied at the correlated molecular orbital theory CCSD(T)/aug-cc-pVDZ(-PP(Ti)) level using density functional theory B3LYP/DZVP2-optimized geometries. Physisorption and chemisorption of ethanol at the bridge Ti site on the trimer and tetramer are thermodynamically preferred over these reactions at the Ti site with a terminal TiâO. Two possible lowest energy reaction coordinates of dehydration were predicted for the dimer and trimer where the ß hydrogen on ethanol transfers to the adjacent terminal oxygen, or to the adjacent bidentate oxygen. Only the latter reaction coordinate was predicted to be the lowest energy one for the tetramer. Removal of ethylene from the (TiO2)nOH2-C2H4 complex for n = 2-4 at 0 K requires 2-7 kcal/mol. For dehydrogenation, transfer of the α hydrogen to the adjacent Ti atom results in the lowest energy reaction coordinate following a proton-coupled electron-transfer (PCET) process. Removal of the acetaldehyde molecule requires 14-26 kcal/mol from the (TiO2)nH2-C2H4O complex. Loss of H2 from the (TiO2)nH2 complex requires 5-8 kcal/mol. Dehydration and dehydrogenation of one ethanol molecule occur below the reactant asymptote for (TiO2)n, n = 2-4, whereas for (WO3)3 and (MoO3)3, two ethanol molecules are required for this process to be below the reactant asymptote. Dehydration of ethanol is thermodynamically preferred over dehydrogenation on (TiO2)n, n = 2-4. There is an approximate linear correlation of metal Lewis acidity with physisorption of ethanol. A quadratic correlation is predicted between the chemisorption barrier of ethanol and the corresponding proton affinity of oxygen to which the proton is being transferred. There are linear correlations between the basicity of the oxygen site and the acidity of the OH group versus the energy to remove C2H4 from that site. The results for the nanoclusters for n = 3 and 4 are consistent with the experimental results for the reactivity of ethanol on Ti5c4+ rutile TiO2 (110) surface sites.
RESUMO
Structures for the mono-, di-, and tri-bridge isomers of M2O5 as well as those for the MO2 and MO3 fragments for M = V, Nb, Ta, and Pa were optimized at the density functional theory (DFT) level. Single point CCSD(T) calculations extrapolated to the complete basis set (CBS) limit at the DFT geometries were used to predict the energetics. The lowest energy dimer isomer was the di-bridge for M = V and Nb and the tri-bridge for M = Ta and Pa. The di-bridge isomers were predicted to be composed of MO2+ and MO3- fragments, whereas the mono- and tri-bridge are two MO2+ fragments linked by an O2-. The heats of formation of M2O5 dimers, as well as MO2 and MO3 neutral and ionic species were predicted using the Feller-Peterson-Dixon (FPD) approach. The heats of formation of the MF5 species were calculated to provide additional benchmarks. Dimerization energies to form the M2O5 dimers are predicted to become more negative going down group 5 and range from -29 to -45 kcal mol-1. The ionization energies (IEs) for VO2 and TaO2 are essentially the same at 8.75 eV whereas the IEs for NbO2 and PaO2 are 8.10 and 6.25 eV, respectively. The predicted adiabatic electron affinities (AEAs) range from 3.75 eV to 4.45 eV for the MO3 species and vertical detachment energies from 4.21 to 4.59 eV for MO3-. The calculated MîO bond dissociation energies increase from 143 kcal mol-1 for M = V to â¼170 kcal mol-1 for M = Nb and Ta to â¼200 kcal mol-1 for M = Pa. The M-O bond dissociation energies are all similar ranging from 97 to 107 kcal mol-1. Natural bond analysis provided insights into the types of chemical bonds in terms of their ionic character. Pa2O5 is predicted to behave like an actinyl species dominated by the interactions of approximately linear PaO2+ groups.
RESUMO
A combination of high-level ab initio calculations and anion photoelectron detachment (PD) measurements is reported for the UC, UC-, and UC+ molecules. To better compare the theoretical values with the experimental photoelectron spectrum (PES), a value of 1.493 eV for the adiabatic electron affinity (AEA) of UC was calculated at the Feller-Peterson-Dixon (FPD) level. The lowest vertical detachment energy (VDE) is predicted to be 1.500 eV compared to the experimental value of 1.487 ± 0.035 eV. A shoulder to lower energy in the experimental PD spectrum with the 355 nm laser can be assigned to a combination of low-lying excited states of UC- and excited vibrational states. The VDEs calculated for the low-lying excited electronic states of UC at the SO-CASPT2 level are consistent with the observed additional electron binding energies at 1.990, 2.112, 2.316, and 3.760 eV. Potential energy curves for the Ω states and the associated spectroscopic properties are also reported. Compared to UN and UN+, the bond dissociation energy (BDE) of UC (411.3 kJ/mol) is predicted to be considerably lower. The natural bond orbitals (NBO) calculations show that the UC0/+/- molecules have a bond order of 2.5 with their ground-state configuration arising from changes in the oxidation state of the U atom in terms of the 7s orbital occupation: UC (5f27s1), UC- (5f27s2), and UC+ (5f27s0). The behavior of the UN and UC sequence of molecules and anions differs from the corresponding sequences for UO and UF.
RESUMO
Dinuclear perchlorate complexes of uranium, neptunium, and plutonium were characterized by reactivity and DFT, with results revealing structures containing pentavalent, hexavalent, and heptavalent actinyls, and actinyl-actinyl interactions (AAIs). Electrospray ionization produced native complexes [(AnO2)2(ClO4)3]- for An:An = U:U, Np:Np, Pu:Pu, and Np:Pu, which are intuitively formulated as actinyl(V) perchlorates. However, DFT identified lower-energy structures [(AnO2)(AnO3)(ClO4)2(ClO3)]- comprising a perchlorate fragmented to ClO3, actinyl(VI) cation AnVIO22+, and neutral AnO3. For U:U and Np:Np, and Np in Np:Pu, the coordinated AnO3 is calculated as actinyl(VI) with an equatorial oxo, [OylâAnVIâOyl][âOeq], whereas for Pu:Pu, it is plutonyl(V) oxyl, [OylâPuVâOyl][-Oeqâ¢]. The implied lower stability of PuVI versus NpVI indicates weaker PuâOeq versus NpâOeq bonding. Adsorption of O2 by the U:U complex suggests oxidation of UV to UVI, corroborating the assignment of perchlorate [(AnVO2)2(ClO4)3]-. DFT predicts the O2 adducts are [(AnVIO2)(O2)(AnVIO2)(ClO4)3]- with actinyls oxidized from +V to +VI by bridging peroxide, O22-. In accordance with reactivity, O2- addition is computed as substantially exothermic for U:U and least favorable for Pu:Pu. Collision-induced dissociation of native complexes eliminated ClO2 to yield [(AnO2)(O)2(AnO2)(ClO4)2]-, in which fragmented O atoms bridge as oxyl O-⢠and oxo O2- to yield uranyl(VI) and plutonyl(VI), or as oxos O2- to yield neptunyl(VII), [OylâNpVIIâOyl]3+.
RESUMO
The results of calculations of the properties of the anion UN- including electron detachment are described, which further expand our knowledge of this diatomic molecule. High-level electronic structure calculations were conducted for the UN and UN- diatomic molecules and compared to photoelectron spectroscopy measurements. The low-lying Ω states were obtained using multireference CASPT2 including spin-orbit effects up to â¼20,000 cm-1. At the Feller-Peterson-Dixon (FPD) level, the adiabatic electron affinity (AEA) of UN is estimated to be 1.402 eV and the vertical detachment energy (VDE) is 1.423 eV. The assignment of the UN excited states shows good agreement with the experimental results with a VDE of 1.424 eV. An Ω = 4 ground state was obtained for UN- which is mainly associated with the 3H ΛS state. Thermochemical calculations estimate a bond dissociation energy (BDE) for UN- (U- + N) of 665.9 kJ/mol, â¼15% larger than that of UN and UN+. The NBO analysis reveals U-N triple bonds for the UN, UN-, and UN+ species.
RESUMO
A series of actinyl(VI) nitrate salts of the form MAnO2(NO3)3, where M = NH4+ K+, Rb+, Cs+, and Me4N+ and AnO22+ = U, Np, Pu, and AnO2(NO3)2(H2O)2·H2O, and the uranyl tetranitrates M2UO2(NO3)4 have been synthesized from aqueous solution and their structures determined using single-crystal X-ray diffraction. Together, these complexes represent an isostructural series of actinide complexes among the salts crystallized with the same charge-compensating cation and have been studied using vibrational spectroscopy including Raman and Fourier-transform infrared. Periodic trends in both the structural properties of these complexes and their vibrational spectra are presented and discussed, in particular the invariant nature of the O≡An≡O asymmetric stretching frequencies observed across the actinyl series. Electronic structure calculations were performed at a variety of levels of theory to aid in the interpretation of the vibrational data and to correlate trends in the data with the underlying electronic properties of these molecules.
RESUMO
The results of ab initio correlated molecular orbital theory electronic structure calculations for low-lying electronic states are presented for UH and UH- and compared to photoelectron spectroscopy measurements. The calculations were performed at the CCSD(T)/CBS and multireference CASPT2 including spin-orbit effects by the state interacting approach levels. The ground states of UH and UH- are predicted to be 4Ι9/2 and 5Λ6, respectively. The spectroscopic parameters Te, re, ωe, ωexe, and Be were obtained, and potential energy curves were calculated for the low energy Ω states of UH. The calculated adiabatic electron affinity is 0.468 eV in excellent agreement with an experimental value of 0.462 ± 0.013 eV. The lowest vertical detachment energy was predicted to be 0.506 eV for the ground state, and the adiabatic ionization energy (IE) is predicted to be 6.116 eV. The bond dissociation energy (BDE) and heat of formation values of UH were obtained using the IE calculated at the Feller-Peterson-Dixon level. For UH, UH-, and UH+, the BDEs were predicted to be 225.5, 197.9, and 235.5 kJ/mol, respectively. The BDE for UH is predicted to be â¼20% lower in energy than that for ThH. The analysis of the natural bond orbitals shows a significant U+H- ionic component in the bond of UH.
RESUMO
The chemiluminescent reactions of the group 3 metals Sc and Y with F2, Cl2, Br2, ClF, ICl (Sc), IBr (Y), and SF6 and La with F2, SF6, Cl2, and ClF have been studied at low pressures (6 × 10-6 to 4 × 10-4 Torr) using a beam-gas arrangement and extended to the 10-3 Torr multiple collision pressure range. Contrary to previous reports, the observed chemiluminescent spectra are primarily attributed to emission from the metal monohalides. Extensive pressure and temperature dependence studies and high-level correlated molecular orbital theory calculations of the bond dissociation energies support this conclusion and the attribution of the chemiluminescence. Evidence for the "selective" production of a monohalide excited electronic state is obtained for several of the Sc and Y reactions. All reactions producing the metal monofluorides are first order with respect to the oxidant, while reactions producing the monochlorides and monobromides are found to be "faster than first order" with respect to the oxidant. This difference is associated with the metal halide bond dissociation energies and the metal halide product internal density of states. Analysis of the temperature dependence for six representative reactions indicates that the "selective" excited-state formation of the metal monohalides proceeds via a direct mechanism with negligible activation energy. We compare and contrast the present results with previous experiments and interpretations which have assigned the selective emission from these systems to the group 3 dihalides produced in a two-step reaction sequence analogous to an electron jump process. The current results suggest a distinctly different interpretation of the observed processes in these systems. The observed selectivity observed in these studies is remarkable given the significant number of known and potential excited states in the scandium and yttrium halides as well as their different electronic configurations.
RESUMO
A range of carbene structures and their adducts with one another and with a selection of small-molecule electrophiles and nucleophiles were examined at the composite correlated molecular orbital theory G3MP2 level to explore ground-state "carbenic" structures, their stabilities, and reactivities. Differences between carbene general classification as a singlet electrophilic carbene or singlet nucleophilic carbene and their given reactivity are discussed. A key quantity is the carbon-carbon bond dissociation energy for carbene dimers or the carbene-adduct dissociation energy for other species. The carbene dimer bond dissociation energies span a wide range from 10 to 170 kcal/mol. The hydrogenation energies and singlet-triplet splitting were found to correlate best with the carbene's self-dimerization energy, whereas other descriptors do not. The proton and fluoride affinities of the carbenes alone prove inadequate for classifying reactivity among classes of carbenes. The self-dimerization bond dissociation energy, hydrogenation energy, and singlet-triplet splitting of various carbenes, despite sometimes large differences in proton affinity and other indicators of reactivity, provide usable metrics to correlate substantial amounts of thermodynamic and kinetic (reactivity) information regarding these structures.
RESUMO
High-level electronic structure calculations of the ground and low-lying energy electronic states for ThHx and ThHx- for x = 2-5 are reported and compared to available anion photoelectron detachment experiments. The adiabatic electron affinities (EAs) are predicted to be 0.82, 0.88, 0.51, and 2.36 eV for x = 2 to 5, respectively, at the Feller-Peterson-Dixon (FPD) level. The vertical detachment energies (VDEs) are predicted to be 0.84, 0.88, 0.81, and 4.38 eV for x = 2-5, respectively. The corresponding experimental VDEs are 0.871 eV for x = 2, 0.88 eV for x = 3, and 4.09 eV for x = 5. As for ThH, there is a significant spin-orbit (SO) correction for the EA of ThH2, and this correction decreases substantially for x > 2. The observed ThH2- photoelectron spectrum has many transitions as predicted at the CASPT2-SO level. The FPD bond dissociation energies (BDEs) increase from 67 to 75 kcal/mol for x = 2 to x = 4 at the FPD level. The BDE for ThH5 is much lower as it is a complex of H2 with ThH3. The hydride affinities for x = 2 to 4 are all comparable and near 70 kcal/mol. A natural bond orbital analysis is consistent with a significant Th+-H- ionic contribution to the Th-H bonds. There is very little participation of the 5f orbitals in the bonding and the valence electrons on the Th are dominated by 7s and 6d for the neutrals and anions except for ThH2- where there is a significant contribution from the 7p.
RESUMO
High-level electronic structure calculations of the low-lying energy electronic states for ThH, ThH-, and ThH+ are reported and compared to experimental measurements. The inclusion of spin-orbit coupling is critical to predict the ground-state ordering as inclusion of spin-orbit switches the coupled-cluster CCSD(T) ordering of the two lowest energy states for ThH and ThH+. At the multireference spin-orbit SO-CASPT2 level, the ground states of ThH, ThH-, and ThH+ are predicted to be the 2Δ3/2, 3Φ2, and 3Δ1 states, respectively. The adiabatic electron affinity is calculated to be 0.820 eV, and the vertical detachment energy is calculated to be 0.832 eV in comparison to an experimental value of 0.87 ± 0.02 eV. The observed ThH- photoelectron spectrum has many transitions, which approximately correlate with excitations of Th+ and/or Th. The adiabatic ionization energy of ThH including spin-orbit corrections is calculated to be 6.181 eV. The natural bond orbital results are consistent with a significant contribution of the Th+H- ionic configuration to the bonding in ThH. The bond dissociation energies for ThH, ThH-, and ThH+ using the Feller-Peterson-Dixon approach were calculated to be similar for all three molecules and lie between 259 and 280 kJ/mol.
RESUMO
Most ligand designs for reactions catalyzed by (NHC)Cu-H (NHC = N-heterocyclic carbene ligand) have focused on introducing steric bulk near the Cu center. Here, we evaluate the effect of remote ligand modification in a series of [(NHC)CuH]2 in which the para substituent (R) on the N-aryl groups of the NHC is Me, Et, t Bu, OMe or Cl. Although the R group is distant (6 bonds away) from the reactive Cu center, the complexes have different spectroscopic signatures. Kinetics studies of the insertion of ketone, aldimine, alkyne, and unactivated α-olefin substrates reveal that Cu-H complexes with bulky or electron-rich R groups undergo faster substrate insertion. The predominant cause of this phenomenon is destabilization of the [(NHC)CuH]2 dimer relative to the (NHC)Cu-H monomer, resulting in faster formation of Cu-H monomer. These findings indicate that remote functionalization of NHCs is a compelling strategy for accelerating the rate of substrate insertion with Cu-H species.
RESUMO
We used IR and XRD, with supporting theoretical calculations, to investigate the swelling behavior of Na+-, NH4+-, and Cs+-montmorillonites (SWy-2) in supercritical fluid mixtures of H2O, CO2, and CH4. Building on our prior work with Na-clay that demonstrated that H2O facilitated CO2 intercalation at relatively low RH, here we show that increasing CO2/CH4 ratios promote H2O intercalation and swelling of the Na-clay at progressively lower RH. In contrast to the Na-clay, CO2 intercalated and expanded the Cs-clay even in the absence of H2O, while increasing fluid CO2/CH4 ratios inhibited H2O intercalation. The NH4-clay displayed intermediate behavior. By comparing changes in the HOH bending vibration of H2O intercalated in the Cs-, NH4-, and Na-clays, we posit that CO2 facilitated expansion of the Na-clay by participating in outer-sphere solvation of Na+ and by disrupting the H-bond network of intercalated H2O. In no case did the pure CH4 fluid induce expansion. Our experimental data can benchmark modeling studies aimed at predicting clay expansion in humidified fluids with varying ratios of CO2 and CH4 in real reservoir systems with implications for enhanced hydrocarbon recovery and CO2 storage in subsurface environments.