Allergens and Other Harmful Substances in Hydroalcoholic Gels: Compliance with Current Regulation.

Hydroalcoholic gels or hand sanitisers have become essential products to prevent and mitigate the transmission of COVID-19. Depending on their use, they can be classified as cosmetics (cleaning the skin) or biocides (with antimicrobial effects). The aim of this work was to determine sixty personal care products frequently found in cosmetic formulations, including fragrance allergens, synthetic musks, preservatives and plasticisers, in hydroalcoholic gels and evaluate their compliance with the current regulation. A simple and fast analytical methodology based on solid-phase microextraction followed by gas chromatography-tandem mass spectrometry (SPME-GC-MS/MS) was validated and applied to 67 real samples. Among the 60 target compounds, 47 of them were found in the analysed hand sanitisers, highlighting the high number of fragrance allergens (up to 23) at concentrations of up to 32,458 µg g-1. Most of the samples did not comply with the labelling requirements of the EU Regulation No 1223/2009, and some of them even contained compounds banned in cosmetic products such as plasticisers. Method sustainability was also evaluated using the metric tool AGREEPrep, demonstrating its greenness.

Ultrasound-assisted extraction followed by liquid chromatography coupled to tandem mass spectrometry for the simultaneous determination of multiclass herbicides in soil.

An analytical methodology based on ultrasound-assisted extraction (UAE) followed by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) has been developed for the identification and quantification of 9 authorized herbicides in soil (dimethenamid-P, imazamox, S-metolachlor, nicosulfuron, pendimethalin, prosulfuron, bentazone, terbuthylazine, and mesotrione). Preliminary experiments dealing with solvent extraction, the extraction technique, and herbicide response comparison in soil, with and without organic amendments, were carried out with the purpose of obtaining high sample throughput and sensitivity. UAE and the solvent mixture water:methanol demonstrated higher efficiency and they were selected as sample treatment and extraction solvent, respectively. Critical parameters affecting UAE were optimized by experimental design. In the present research, the extraction technique used in the official EPA microwave-assisted extraction (MAE) methodology (United States Environmental Protection Agency) and UAE optimized methodology were compared. The results indicated that the developed method showed better efficacy since microwave extraction gave very poor responses for nicosulfuron and prosulfuron. The temperature extraction was also optimized; room temperature was the most suitable to work with. Under the optimized conditions, the proposed UAE-LC-MS/MS method was assessed in terms of linearity (R2 ≥ 0.9912), accuracy (recoveries around 100%), and precision (relative standard deviation, RSD < 13%). The absence of significant matrix effects allowed quantification in real samples by external calibration with standards prepared in water:methanol. Method sustainability was also evaluated using the metric tool AGREEPrep. Finally, the analysis of real contaminated samples revealed the presence of 7 out of the 9 studied herbicides with S-metolachlor at high concentrations in all samples.

Complementarity of two approaches based on the use of high-resolution mass spectrometry for the determination of multi-class antibiotics in water. Photodegradation studies and non-target screenings.

The development of analytical methodologies to monitor different antibiotic families in water and the implementation of alternatives for their efficient elimination are a great challenge. The aim of this research was to develop a method based on solid-phase extraction followed by ultra-high performance liquid chromatography coupled to quadrupole time-of-flight mass spectrometry to analyse multi-class antibiotics, including macrolides, cephalosporins, fluoroquinolones, sulfonamides and diaminopyrimidines, in waters. Several parameters affecting the extraction such as the sample pH, type of sorbent and cartridge, elution volume and breakthrough volume were optimized. The method was validated in real samples, and matrix effect was assessed, demonstrating that the use of isotopically labelled surrogate compounds was mandatory to avoid standard addition calibration for each individual samples. Urban and hospital wastewater samples, as well as natural waters, were analysed, confirming the presence of 12 of the 14 target compounds at concentrations up to 3.5 µg L-1. Non-target analysis based on data-independent workflow was also performed, enabling the identification of 94 pollutants. Preliminary photodegradation experiments were also assessed, revealing the total removal of many target compounds after the first 5-10 min of UVC irradiation. In addition, 20 by-products formed after photolysis could be identified using a non-target approach.

Development of a solid phase microextraction gas chromatography tandem mass spectrometry methodology for the analysis of sixty personal care products in hydroalcoholic gels - hand sanitizers - in the context of COVID-19 pandemic.

Because of the coronavirus pandemic, hydroalcoholic gels have become essential products to prevent the spread of COVID-19. This research aims to develop a simple, fast and sustainable microextraction methodology followed by gas chromatography tandem mass spectrometry (GC-MS/MS) to analyze simultaneously 60 personal care products (PCPs) including fragrances allergens, synthetic musks, preservatives and plasticizers in hand sanitizers. Micro-matrix-solid-phase dispersion (µMSPD) and solid-phase microextraction (SPME) were compared with the aim of obtaining high sensitivity and sample throughput. SPME demonstrated higher efficiency being selected as sample treatment. Different dilutions of the sample in ultrapure water were assessed to achieve high sensitivity but, at the same time, to avoid or minimize matrix effect. The most critical parameters affecting SPME (fibre coating, extraction mode and temperature) were optimized by design of experiments (DOE). The method was successfully validated in terms of linearity, precision and accuracy, obtaining recovery values between 80 and 112% for most compounds with relative standard deviation (RSD) values lower than 10%. External calibration using standards prepared in ultrapure water demonstrated suitability due to the absence of matrix effect. Finally, the simple, fast and high throughput method was applied to the analysis of real hydroalcoholic gel samples. Among the 60 target compounds, 39 of them were found, highlighting the high number of fragrance allergens, at concentrations ranging between 0.01 and 217 µg g-1. Most of the samples were not correctly labelled attending cosmetic Regulation (EU) No 1223/2009, and none of them followed the World Health Organization (WHO) recommendation for hand sanitizers formulation.

Evaluating the Presence and Contents of Phytochemicals in Honey Samples: Phenolic Compounds as Indicators to Identify Their Botanical Origin.

Honey is a natural product well known for its beneficial properties. It contains phytochemicals, a wide class of nutraceuticals found in plants, including compounds with highly demonstrated antimicrobial and antioxidant capacities as phenolic compounds and flavonoids. The main goal of this work is the development of a miniaturized and environmentally friendly methodology to obtain the phenolic profile of Galician honeys (Northwest Spain) from different varieties such as honeydew, chestnut, eucalyptus, heather, blackberry and multi-floral. The total phenolic content (TPC) and antioxidant activity (AA) were also evaluated. As regards sample preparation, miniaturized vortex (VE) and ultrasound assisted extraction (UAE) employing aqueous-based solvents were performed. Individual quantification of 41 target phenolic compounds was carried out by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Results revealed the presence of 25 phenolic compounds in the 91 analyzed samples, reaching concentrations up to 252 µg g-1. Statistical tools such as analysis of variance (ANOVA) and principal component analysis (PCA) were employed to obtain models that allowed classifying the different honeys according to their botanical origin. Obtained results, based on TPC, AA and ∑phenolic compounds showed that significant differences appeared depending on the honey variety, being several of the identified phenol compounds being responsible of the main differentiation.

Occurrence of Fungicides in Vineyard and the Surrounding Environment.

Seventeen fungicides were determined in different matrices from vineyard areas, including vine leaves, soils, grapes and water, using gas chromatography coupled to tandem mass spectrometry (GC-MS/MS). For leaf analysis, ultrasound-assisted extraction (UAE) was performed evaluating different solvents. UAE was compared with other extraction techniques such as vortex extraction (VE) and matrix solid-phase dispersion (MSPD). The performance of the UAE method was demonstrated on vine leaf samples and on other types of samples such as tea leaves, underlining its general suitability for leaf crops. As regards other matrices, soils were analyzed by UAE and microwave-assisted extraction (MAE), grapes by UAE and waters by SPE using cork as the sorbent. The proposed method was applied to 17 grape leaf samples in which 14 of the target fungicides were detected at concentrations up to 1000 µg g-1. Furthermore, the diffusion and transport of fungicides was demonstrated not only in crops but also in environmental matrices.

Turning cork by-products into smart and green materials for solid-phase extraction - gas chromatography tandem mass spectrometry analysis of fungicides in water.

During stoppers production, large amounts of cork by-products (CBPs) are generated, being used as low-value material. This project aims to turn CBPs into smart, natural and sustainable materials (sorbent) for solid-phase extraction (SPE) of pesticides from water. The study describes the use of CBPs for the extraction of 17 fungicides (metalaxyl, cyprodinil, tolylfluanid, procymidone, folpet, fludioxonil, myclobutanil, kresoxim methyl, iprovalicarb, benalaxyl, trifloxystrobin, fenhexamid, tebuconazole, iprodione, pyraclostrobin, azoxystrobin and dimethomorph) followed by gas chromatography-tandem mass spectrometry (GC-MS/MS) analysis. The most critical parameters affecting SPE were optimized by experimental design methodology. Under the optimal conditions, the method was successfully validated in terms of linearity, repeatability, and intermediate precision. Fungicide recovery was assessed in different real water samples including river, fountain, rainwater and spring water at 3 concentration levels (0.1, 0.5 and 10 µg L-1). Recoveries ranged between 70-118% with RSD values lower than 20%, and matrix effects were not observed. Finally, the method was applied to samples from irrigation, rain, and river water, all collected in vineyards areas, revealing the presence of 10 of the 17 fungicides, at concentration up to hundreds of µg L-1. The use of CBPs seems to be a promising low-cost and ecofriendly alternative to be employed as sorbent in SPE techniques to extract fungicides from the aquatic environment.

Fabric phase sorptive extraction for the determination of 17 multiclass fungicides in environmental water by gas chromatography-tandem mass spectrometry.

A rapid environmental pollution screening and monitoring workflow based on fabric phase sorptive extraction-gas chromatography-tandem mass spectrometry (FPSE-GC-MS/MS) is proposed for the first time for the analysis of 17 widespread used fungicides (metalaxyl, cyprodinil, tolylfluanid, procymidone, folpet, fludioxonil, myclobutanil, kresoxim methyl, iprovalicarb, benalaxyl, trifloxystrobin, fenhexamid, tebuconazole, iprodione, pyraclostrobin, azoxystrobin and dimethomorph) in environmental waters. The most critical parameters affecting FPSE, such as sample volume, matrix pH, desorption solvent and time, and ionic strength were optimized by statistical design of experiment to obtain the highest extraction efficiency. Under the optimized conditions, the proposed FPSE-GC-MS/MS method was validated in terms of linearity, repeatability, reproducibility, accuracy and precision. To assess matrix effects, recovery studies were performed employing different water matrices including ultrapure, fountain, river, spring, and tap water at 4 different concentration levels (0.1, 0.5, 1 and 5 µg/L). Recoveries were quantitative with values ranging between 70-115%, and relative standard deviation values lower than 14%. Limits of quantification were at the low ng/L for all the target fungicides. Finally, the validated FPSE-GC-MS/MS method was applied to real water samples, revealing the presence of 11 out of the 17 target fungicides.