Cationic Solid SMEDDS of Efavirenz for Improved Oral Delivery: Development by Central Composite Design, In Vitro and In Vivo Evaluation.

Efavirenz (EFV) is an anti-HIV drug with high dose and 40% oral bioavailability (BA). The aim was to improve the bioavailability by designing cationic solid SMEDDS. Solubility data, ternary phase diagrams, and central composite design were employed in design. Globule size, TEM, DSC, and SEM studies were used for characterization. Optimized L-SMEDDS contained 20 mg of EFV, 10 mg of Peceol, 43.5 mg of Tween 80, and 40 mg of Labrafac Lipophile WL-1349 and the characters included mean globule size-94 nm, PDI-0.255, and ZP-28 mV. Later, octadecylamine was added to get L-SMEDDS with + 38 mV charge. L-SMEDDS was converted into solid S-SMEDDS by adsorbing onto silica carriers. Syloid XDP was preferred based on flow and oil adsorption capacity. The % drug (EFV) release from powder, L-SMEDDS, and solid SMEDDS were 14.04, 94.47, and 85 respectively in first 30 min. TEM picture showed dispersed globules. DSC and SEM studies indicated the loss of drug crystallinity in S-SMEDDS. Pharmacokinetic (PK) studies in Wistar rats revealed 4.12 fold hike in BA for optimized cationic S-SMEDDS when compared to EFV suspension. Increased absorption could be due to the positive charge on globules. Thus, cationic S-SMEDDS emerged as a potential novel delivery system for improvement in BA and has scope for reducing the high dose for AIDS patients by future clinical studies.

Design and Development of Solid SMEDDS and Liquisolid Formulations of Lovastatin, for Improved Drug Dissolution and In vivo Effects-a Pharmacokinetic and Pharmacodynamic Assessment.

Lovastatin (Lov) is a lipid-lowering agent, with 5% bioavailability (BA) due to extensive first pass metabolism and poor solubility. To enhance dissolution and in vivo effects, Lov solid self microemulsifying drug delivery system (SMEDDS) and liquisolid systems were developed and evaluated to select superior one. Solubilities were determined in oils, surfactants, and cosurfactants. Ternary phase diagrams were constructed and selected the one which showed maximum emulsion zone. In vitro dissolution, DSC, SEM and PXRD studies were used to characterize the developed formulations. In vivo studies were conducted on optimal formulations in wistar rats. Based on solubilities, Capmul PG8 and Capmul MCM were preferred as oils, Labrasol and Transcutol P as surfactant and cosurfactant. Here, Syloid XDP carrier showed better adsorption capacity among others, hence was used in optimal solid SMEDDS (SX) and liquisolid (LS) formulations. Dissolution study results showed significant improvement in release when compared to pure drug. DSC, SEM, and PXRD results indicated the loss of drug crystallinity in optimal formulations. In pharmacokinetic (PK) study, SX and LS showed 2.57 and 1.43 fold improvements in AUC, when compared to that of coarse suspension (CS). In pharmacodynamic (PD) study, hyperlipidemia was induced by Triton X-100. CS and LS treatments showed a decline in hyperlipidemic levels at 4 h. But, SX-treated group showed early onset of decline at 2 h. Further, the duration of anti-hyperlipidemia was at least 12 h extra when compared to CS and LS. This study confirmed the superiority of SX over LS in PK and PD effects.

Pharmacokinetic and pharmacodynamic studies of iloperidone-loaded lipid nanoemulsions via oral route of administration.

Iloperidone (IL) is practically insoluble in water and has significant first-pass metabolism, resulting in low oral bioavailability in humans (36%). IL lipid nanoemulsions (IL-LNEs) were prepared to improve oral bioavailability. IL-LNEs were formulated by hot homogenization and ultrasonication method. Soybean oil and egg lecithin in various concentrations as emulsifier were used in the preparation of LNEs. Dynamic light scattering technique was used for globule size analysis. All LNE formulations showed narrow size distribution and the average globule size and Poly Dispersity Index (PDI) were found to be in between 182.2 ± 2.8 to 222.3 ± 1.9 nm and 0.200 ± 0.004 to 0.274 ± 0.005 respectively. Zeta potential values varied from -20.0 ± 0.15 to -28.9 ± 0.30 mV which indicated stability of prepared LNEs. All formulations showed good entrapment efficiency ranging from 99.07 ± 0.01 to 99.28 ± 0.01% when separated using centrisart tubes and the drug content varied from 96.99 ± 0.94 to 99.06 ± 0.36%. Physical stability testing indicated the stability of all LNEs and optimized LNE-IL4 was found stable for 3 months at both refrigerated (4 °C) and room temperature (25 °C). During in vivo studies in wistar rats, the optimized LNE showed 2.47-fold improvement in the oral bioavailability and superior (1.22-fold) pharmacodynamic activity when compared to marketed tablet suspension (Ilosure-4®) in suppressing the hyperlocomotor activity, being induced by MK-801 (Dizocilpine).

Development, characterization, comparative pharmacokinetic and pharmacodynamic studies of iloperidone solid SMEDDS and liquisolid compact.

Iloperidone (ILO) is an anti-psychotic, used in schizophrenia. It has low bioavailability (36%) due to low solubility and first pass effect. Oral solid self microemulsifying drug delivery system (SMEDDS) and liquisolid compact (LSC) of ILO were developed. The hypothesis is to test in vivo performance (PK and PD effects) of these delivery systems, as both systems improve dissolution. Based on solubility Capmul MCM, Labrafac WL 1349 were selected as oils, Lauroglycol 90 and PEG 600 were selected as surfactant and cosurfactant. Syloid XDP was optimized for adsorption of liquid SMEDDS. Syloid XDP and Aerosil 200 were optimized as carrier and coating material in the ratio of 15:1 w/w for liquisolid formulation. SEM and PXRD studies indicated no specific crystallinity due to bulkiness in both formulations, which showed similar flow and release behavior. Pharmacokinetic studies were performed for ILO Coarse suspension (CS), Tablet suspension (TS), optimized solid SMEDDS (A1X) and liquisolid compact (S3) in wistar rats. About 3.80 and 2.19-fold improvements in relative bioavailabilty were found for A1X and S3, respectively, when compared to CS. In comparison to TS, 2.61 and 1.51 fold improvements in bioavailability were found for A1X and S3, respectively. Further, Pharmacodynamic activity was studied by reversal of MK-801 induced hyperlocomotion in rats. A1X and S3 formulations showed maximum reversal after 15 min when compared to CS and found to have similar performance. Thus, in comparison to S3, A1X showed significant difference in pharmacokinetic effects but similar pharmacodynamic effects.

Lipid Nanoemulsions of Rebamipide: Formulation, Characterization, and In Vivo Evaluation of Pharmacokinetic and Pharmacodynamic Effects.

Rebamipide has low oral bioavailability (10%) due to its low solubility and permeability. Lipid nanoemulsions (LNEs) were prepared in order to improve its oral bioavailability. Rebamipide-loaded lipid nanoemulsions were formulated by hot homogenization and ultrasonication method. Olive oil and egg lecithin in various concentrations as emulsifier were used in the preparation of LNEs. The lipid nanoemulsions were evaluated for various parameters. The globule size, polydispersity index (PDI), and zeta potential (ZP) of the formulations ranged from 230.3 ± 3.88 to 279.8 ± 5.76 nm, 0.204 ± 0.008 to 0.246 ± 0.029, and - 27.7 ± 2.05 to - 31.0 ± 1.87 mV, respectively. Entrapment efficiency and assay values ranged from 99.90 ± 0.006 to 99.92 ± 0.002% and 99.3 ± 0.808 to 99.6 ± 0.360, respectively. Physical stability test results revealed that the optimized LNEs were stable for 2 months at both room (25°C) and refrigerated temperature (4°C). The optimized LNE showed 4.32-fold improvement in the oral bioavailability in comparison to a marketed tablet suspension. In vivo anti ulcer activity of rebamipide LNE was studied by testing the prophylactic effect in preventing the mucosal damage in stomach region. The mucosa of stomach in animals was damaged by per oral administration of 80% alcohol. Maximum prophylactic antiulcer activity was observed by per oral delivery of rebamipide as LNE. Our results indicated that LNEs were a promising approach for the oral delivery of rebamipide for systemic effects along with local effects in protecting gastric region, which gets damaged during peptic ulcers.

Development of olmesartan medoxomil lipid-based nanoparticles and nanosuspension: preparation, characterization and comparative pharmacokinetic evaluation.

The aim was to enhance the oral bioavailability of olmesartan medoxomil (OM) by preparing solid lipid nanoparticles (SLNs) and comparing with nanosuspension (OM-NS). OM-SLNs and OM-NS were prepared by known methods. Prepared SLNs were evaluated for physical characters and in vivo pharmacokinetic (PK) performance in rats. OM-NS showed more than four-fold increase in the solubility. During DSC and XRD studies, drug incorporated in SLNs was found to be in amorphous form. The relative bioavailability of OM-SLN and OM-NS was 7.21- and 3.52-fold when compared with that of coarse suspension. Further, OM-SLNs also increased the oral bioavailability by two-fold over that of OM-NS.

Development of zolmitriptan transfersomes by Box-Behnken design for nasal delivery: in vitro and in vivo evaluation.

The aim was to prepare an optimized zolmitriptan (ZT)-loaded transfersome formulation using Box-Behnken design for improving the bioavailability by nasal route for quick relief of migraine and further to compare with a marketed nasal spray. Here, three factors were evaluated at three levels. Independent variables include: amount of soya lecithin (X1), amount of drug (X2) and amount of tween 80 (X3). The dependent responses were vesicle size (Y1), flexibility index (Y2) and regression coefficient of drug release kinetics (Y3). Prepared formulations were evaluated for physical characters and an optimal system was identified. Further, in vivo pharmacokinetic study was performed in male wistar rats to compare the amount of drug in systemic circulation after intranasal administration. Optimized ZT-transfersome formulation containing 82.74 mg of lecithin (X1), 98.37 mg of zolmitriptan (X2) and 32.2 mg of Tween 80 (X3) and had vesicle size of 93.3 nm, flexibility index of 20.25 and drug release regression coefficient of 0.992. SEM picture analysis revealed that the vesicles were spherical in morphology and had a size more than 1 µm. The formulations were found to be physically stable upon storage at room temperature up to 2 months period, as there were no significant changes noticed in size and ZP. The nasal bioavailability of optimized transfersome formulation was found to be increased by 1.72 times than that of marketed nasal spray (Zolmist®). The design and development of zolmitriptan as transfersome provided improved nasal delivery over a conventional nasal spray for a better therapeutic effect.

Candesartan cilexetil loaded nanodelivery systems for improved oral bioavailability.

Candesartan cilexetil (CC), an antihypertensive drug, has low oral bioavailability due to poor solubility and hepatic first-pass metabolism. These are major limitations in oral delivery of CC. Several approaches are known to reduce the problems of solubility and improve the bioavailability of CC. Among various approaches, nanotechnology-based delivery of CC has potential to overcome the challenges associated with the oral administration. This review focuses on various nano-based delivery systems available and tried for improving the aqueous solubility, dissolution and consequently bioavailability of CC upon oral administration. Of all, solid lipid nanoparticles appear to be promising delivery system, based on current reported results, for delivery of CC, as this system improved the oral bioavailability and possessed prolonged pharmacodynamic effect.

Improved anti-hyperlipidemic activity of Rosuvastatin Calcium via lipid nanoparticles: Pharmacokinetic and pharmacodynamic evaluation.

The intent of this investigation was to improve pharmacokinetic (PK) and pharmacodynamic (PD) effects of Rosuvastatin calcium (RC) by solid lipid nanoparticles (SLNs). RC is anti-hyperlipidemic drug with low oral bioavailability (20%) due to first-pass metabolism. Hot homogenization followed by ultrasonication method was used to prepare RC-SLNs with stearic acid, glyceryl behenate and glyceryl trilaurate as lipid matrices, egg lecithin and poloxamer 188 as surfactants. The prepared SLNs were tested for particle size, PDI, zeta potential (ZP), entrapment efficiency (EE), drug content and in vitro release. Further, PK and PD studies were conducted on selected SLNs. No changes in physical stability of the optimized SLN were observed at refrigerated and room temperature for 90days. SLNs prepared with glyceryl trilaurate having average size of 67.21±1.71nm, PDI of 0.25±0.01, ZP of -28.93±0.84mV with 93.51±0.34% EE was considered as optimized. DSC and XRD studies revealed that no interaction occurred between the drug and lipid. SEM and TEM studies revealed that SLNs were nearly spherical in shape. PK studies showed improvement in the oral bioavailability (extent of absorption) of SLNs by 4.6-fold when compared to that of suspension. PD study of SLNs in hyperlipidemic rats exhibited a decrease in lipid profile for 36h, while a suspension exhibited for 24h.

Candesartan cilexetil loaded solid lipid nanoparticles for oral delivery: characterization, pharmacokinetic and pharmacodynamic evaluation.

Candesartan cilexetil (CC) is used in the treatment of hypertension and heart failure. It has poor aqueous solubility and low oral bioavailability. In this work, CC loaded solid lipid nanoparticles (CC-SLNs) were developed to improve the oral bioavailability. Components of the SLNs include either of trimyristin/tripalmitin/tristearin, and surfactants (Poloxamer 188 and egg lecithin E80). The CC loaded nanoparticles were prepared by hot homogenization followed by ultrasonication method. The physicochemical properties, morphology of CC-SLNs were characterized, the pharmacokinetic and pharmacodynamic behaviour of CC-SLNs were evaluated in rats. Stable CC-SLNs having a mean particle size of 180-220 nm with entrapment efficiency varying in between 91-96% were developed. The physical stability of optimized formulation was studied at refrigerated and room temperature for 3 months. Further, freeze drying was tried for improving the physical stability. DSC and XRD analyses indicated that the drug incorporated into SLN was in amorphous form but not in crystalline state. The SLN-morphology was found to be nearly spherical by electron microscopic studies. Pharmacokinetic results indicated that the oral bioavailability of CC was improved over 2.75-fold after incorporation into SLNs. Pharmacodynamic study of SLNs in hypertensive rats showed a decrease in systolic blood pressure for 48 h, while suspension showed a decrease in systolic blood pressure for only 2 h. Taken together, these effects are due to enhanced bioavailability coupled with sustained action of CC in SLN formulation. Thus, the results conclusively demonstrated the role of CC-SLNs for a significant enhancement in oral bioavailability along with improved pharmacodynamic effect.

Pharmacokinetic and pharmacodynamic studies of nisoldipine-loaded solid lipid nanoparticles developed by central composite design.

OBJECTIVE: Nisoldipine (ND) is a potential antihypertensive drug with low oral bioavailability. The aim was to develop an optimal formulation of ND-loaded solid lipid nanoparticles (ND-SLNs) for improved oral bioavailability and pharmacodynamic effect by using a two-factor, three-level central composite design. Glyceryl trimyristate (Dynasan 114) and egg lecithin were selected as independent variables. Particle size (Y1), PDI (Y2) and entrapment efficiency (EE) (Y3) of SLNs were selected as dependent response variables. METHODS: The ND-SLNs were prepared by hot homogenization followed by ultrasonication. The size, PDI, zeta potential, EE, assay, in vitro release and morphology of ND-SLNs were characterized. Further, the pharmacokinetic (PK) and pharmacodynamic behavior of ND-SLNs was evaluated in male Wistar rats. RESULTS: The optimal ND-SLN formulation had particle size of 104.4 ± 2.13 nm, PDI of 0.241 ± 0.02 and EE of 89.84 ± 0.52%. The differential scanning calorimetry and X-ray diffraction analyses indicated that the drug incorporated into ND-SLNs was in amorphous form. The morphology of ND-SLNs was found to be nearly spherical by scanning electron microscopy. The optimized formulation was stable at refrigerated and room temperature for 3 months. PK studies showed that 2.17-fold increase in oral bioavailability when compared with a drug suspension. In pharmacodynamic studies, a significant reduction in the systolic blood pressure was observed, which sustained for a period of 36 h when compared with a controlled suspension. CONCLUSION: Taken together, the results conclusively demonstrated that the developed optimal ND-SLNs caused significant enhancement in oral bioavailability along with pharmacodynamic effect.

Development of a self-microemulsifying drug delivery system of domperidone: In vitro and in vivo characterization.

The main objective of this work was to prepare a self-micro emulsifying drug delivery system (SMEDDS) for enhancement of oral bioavailability of domperidone, a poorly water soluble drug. The solubility of the drug was determined in various vehicles. A pseudo ternary phase diagram was constructed to identify the self-micro emulsification region. The in vitro self-micro emulsification properties and droplet size analysis of SMEDDS were studied following their addition to water under mild agitation. Further, the resultant formulations were investigated for clarity, phase separation, globule size, effect of pH and dilutions (1:100, 1:500, 1:1000) and freeze-thaw stability. The optimized formulation, SMEDDS-B used for in vitro dissolution and bioavailability assessment, contained oil (Labrafac CC, 25 %, m/m), surfactant (Tween 80, 55 %, m/m), and co-surfactant (Transcutol®, 20 %, m/m). The preliminary oral bioavailability of domperidone from SMEDDS was 1.92-fold higher compared to that of domperidone suspension in rats. The AUC0-24 and cmax values were 3.38 ± 0.81 µg h mL-1 and 0.44 ± 0.03 µg mL-1 for SMEDDS-B formulation in comparison with 1.74 ± 0.18 µg h mL-1 and 0.24 ± 0.02 µg mL-1 for domperidone suspension, suggesting a significant increase (p < 0.05) in oral bioavailability of domperidone from SMEDDSS.

Development of gastroretentive drug delivery system for cefuroxime axetil: in vitro and in vivo evaluation in human volunteers.

The objective of this investigation was to develop the cefuroxime axetil sustained-release floating tablets to prolong the gastric residence time and compare their pharmacokinetic behavior with marketed conventional tablets (Zocef). The floating tablets were developed using polymers like HPMC K4M and HPMC K100M alone, and polymer combination of HPMC K4M and Polyox WSR 303 by effervescent technique. Tablets were prepared by slugging method and evaluated for their physical characteristics, in vitro drug release, and buoyancy lag time. The best formulation (F10) was selected based on in vitro characteristics and used in vivo radiographic and bioavailability studies in healthy human volunteers. All the formulations could sustain drug release for 12 h. The dissolution profiles were subjected to various kinetic release models and it was found that the mechanism of drug release followed Peppas model. The in vivo radiographic studies revealed that the tablets remained in stomach for 225 ± 30 min. Based on in vivo performance, the developed floating tablets showed superior bioavailability than Zocef tablet. Based on in vivo performance significant difference was observed between Cmax, tmax, t1/2, AUC0-∞, and mean residence time of test and reference (p<0.05). The increase in relative bioavailability of test was 1.61 fold when compared to reference.

Preparation, Characterization and Evaluation of Quetiapine Fumarate Solid Lipid Nanoparticles to Improve the Oral Bioavailability.

Quetiapine fumarate is an antipsychotic drug with poor oral bioavailability (9%) due to first-pass metabolism. Present work is an attempt to improve oral bioavailability of quetiapine fumarate by incorporating in solid lipid nanoparticles (SLN). Six quetiapine fumarate SLN formulations were developed using three different lipids by hot homogenisation followed by ultrasonication. The drug excipient compatibility was studied by differential scanning calorimetry (DSC). Stable quetiapine fumarate SLNs having a mean particle size of 200-250 nm with entrapment efficiency varying in between 80% and 92% were developed. The physical stability of optimized formulation F3 was checked at room temperature for 2 months. Comparative bioavailability studies were conducted in male Wistar rats after oral administration of quetiapine fumarate suspension and SLN formulation. The relative bioavailability of quetiapine fumarate from optimized SLN preparation was increased by 3.71 times when compared with the reference quetiapine fumarate suspension. The obtained results are indicative of SLNs as potential lipid carriers for improving the bioavailability of quetiapine fumarate by minimizing first-pass metabolism.

Formulation and pharmacokinetics of diclofenac lipid nanoemulsions for parenteral application.

The objective of the present study was to formulate and determine the pharmacokinetics of stable o/w parenteral lipid nanoemulsions (LNEs) of diclofenac acid used to treat arthritic conditions. The LNEs of diclofenac acid with a mean size ranging from 200 to 240 nm and a zeta potential of -29.4 ± 1.04 mV (negatively charged LNEs) and 62.1 ± 3.5 (positively charged LNEs) emulsions were prepared by hot homogenization and ultrasonication process. The influence of formulation variables, such as the change in proportion of cholesterol, was studied, and optimized formulations were developed. The optimized formulations were relatively stable during centrifugal stress, dilution stress, and storage. The drug content and entrapment efficiency were determined using high-performance liquid chromatography. The in vitro drug release was carried out in phosphate-buffered saline pH 7.4 and cumulative amount of drug released was estimated using a UV-visible spectro-photometer. During in vivo pharmacokinetic studies in male Wistar rats, diclofenac serum concentration from LNEs was higher than that of Voveran injection and was detectable up to 12 h. Diclofenac in LNEs showed improved pharmacokinetic profile with increase in area under the curve, elimination half-life and mean residence time in comparison to Voveran. LAY ABSTRACT: Our aim was to prepare and determine the pharmacokinetics of injectable lipid nanoemulsions of diclofenac acid for treating arthritic conditions by reducing the frequency of dosing and pain at site of injection. The nanoemulsions of diclofenac acid were prepared by homogenization and ultrasonication process. The sizes and charges of oil globules were determined. The effect of cholesterol on stability of emulsion was studied, and an optimized preparation was developed. The optimized formulations were stable during centrifugation, dilution, and storage. The total amount of drug in emulsion and percentage amount of drug present in emulsion globules were determined using high-performance liquid chromatography. The drug release from preparation was carried out in phosphate-buffered saline pH 7.4. The cumulative amount of drug released was estimated using a spectrophotometer. The time course of the released drug in rat serum was determined. Diclofenac concentrations from lipid nanoemulsions were higher than that of Voveran injection (solution form) in serum.

Albumin coupled lipid nanoemulsions of diclofenac for targeted delivery to inflammation.

Diclofenac lipid nanoemulsions (DLNEs) were prepared with different compositions. Based on size, PDI, zeta potential, and in vitro drug release, the optimized DLNEs (DLNE-4 and DLNE-7) were developed and evaluated for drug content, entrapment efficiencies, and stability in comparison to the control formulation (DLNE-1). The albumin was coupled to DLNE-7 globules (DLNE-8) by water soluble carbodiimide (EDC) method, purified, and quantified by modified Bradford method. The pharmacokinetic study was conducted in inflammation (granuloma air pouch model) induced rats. The maximum peak concentration of DLNE-8 was almost fourfold to fivefold in comparison to drug solution in granuloma air pouch fluid (GAPF). The therapeutic availability (TA) of DLNE-8 was 2.89, 2.34, and 1.66 times that of drug solution, DLNE-4 and DLNE-7, respectively. The GAPF/serum ratio of diclofenac from DLNE-8 was above one at all time points indicating the targeting potential of albumin ligated LNEs to inflammatory sites. FROM THE CLINICAL EDITOR: This study demonstrates targeted delivery of diclofenac to an inflammatory environment using the granuloma air pouch model and diclofenac nanoemulsions with different compositions.

Development of indinavir submicron lipid emulsions loaded with lipoamino acids-in vivo pharmacokinetics and brain-specific delivery.

The aim of our present work was to develop indinavir O/W submicron lipid emulsions (SLEs) loaded with lipoamino acids for specific delivery to brain. Tetradecyl aspartic acid (A) and decyl glutamic acid (G) loaded stable SLEs of indinavir having a mean size range of 210-220 nm and average zeta potential of -23.54±1.2 mV were developed using homogenization and ultrasonication. The cumulative % drug release from different SLEs varied in between 26% and 85%. The formulations, SLE, SLE-A3, and SLE-G3 were stable to the centrifugal stress, dilution stress, and storage at RT. The total drug content and entrapment efficiency were determined by HPLC method. During pharmacokinetic studies in male Wistar rats there was no significant difference in the serum levels of indinavir for SLE, SLE-A3 and SLE-G3 formulations at all time points. In tissue distribution studies, the therapeutic availability (TA) of indinavir in brain and kidneys for SLE-A3 were 4.27- and 2.66-fold whereas for SLE-G3 were 2.94 and 2.12 times, respectively, higher than that of indinavir solution. But when compared with that of SLE, in brain tissue the levels of indinavir from SLE-G3 and SLE-A3 varied in between 2.5- and 3.38-fold. While in case of the kidney, it was between 1.23- and 1.54-fold only. However, the TA is not significantly different in tissues like the heart, liver, and spleen. Thus, brain-specific delivery of indinavir was improved by including tetradecyl aspartic acid and decyl glutamic acid in submicron lipid emulsions.

Brain specific delivery of pegylated indinavir submicron lipid emulsions.

The aim of this study was to develop stable parenteral pegylated indinavir submicron lipid emulsions (SLEs) for improving brain specific delivery. The O/W SLEs were prepared by homogenization and ultra sonication process. The sizes of oil globules varied from 241.5 to 296.4nm and zeta potential from -26.6 to -42.4mV. During in vitro drug release studies the cumulative amount of drug released within 12h from SLE-5, DSP2-3 and DPP5-3 was 71.8±0.76, 66.09±1.45 and 68.33±1.29, respectively. The total drug content and entrapment efficiencies were determined. The optimized formulations were stable for the effect of centrifugal stress, thermal stress, dilution stress and storage. In vivo pharmacokinetic and tissue distribution studies were performed in Swiss albino mice, the therapeutic availability (TA) of DSP2-3 was 3.59 times and 2.36 times in comparison to drug solution and SLE-5 respectively, where as DPP5-3 showed TA 2.8 and 1.84 times the drug solution and SLE-5, respectively. The brain to serum ratio of indinavir from DSP2-3 and DPP5-3 varied between 0.4 and 0.7 at all time points indicated the preferential accumulation of drug in brain. In conclusion, pegylated SLEs improved brain specific delivery of indinavir and will be useful in treating chronic HIV infection.

Development of sustained release floating drug delivery system for norfloxacin: in vitro and in vivo evaluation.

Norfloxacin is a drug with an absorption window. Its oral bioavailability is 30-40% and is a case for improvement by appropriate formulation design. In our previous study, gastroretentive floating tablets for norfloxacin were developed employing three different polymers such as HPMC K4M, HPMC K100M, and xanthan gum. The purpose of this investigation is to further improve and evaluate the in vitro and in vivo performance of the prepared floating tablets by inclusion of citric acid as an acidifier, which is also useful in a fed state. The prepared tablets were characterized and found to exhibit satisfactory physico-chemical characteristics. The effects of citric acid at different concentrations on drug release and floating properties were studied. All the prepared batches showed good in vitro buoyancy. It was observed that the tablets remained buoyant for 24 h. The best formulation (F4c), consisting of 1.5% citric acid and 18% HPMC K4M, was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate. These studies revealed that the tablets remained in the stomach for 205 ± 8.4 min in fasting human volunteers. In vivo studies were carried out for the best formulation in eight healthy male human volunteers, and the pharmacokinetic parameters of the developed formulation were compared with marketed conventional (Norbid) tablets. Based on the in vivo performance in a two-way, crossover study design in healthy subjects, the developed floating tablets showed superior bioavailability than the Norbid tablets. The increased bioavailability of developed formulation was found to be 16.27%. LAY ABSTRACT: Norfloxacin is a broad-spectrum antibiotic used to treat bacterial infections such as respiratory and urinary tract infections. Conventional norfloxacin tablets show incomplete drug absorption resulting in lower bioavailabilty. Norfloxacin is better absorbed in the stomach. The dosage forms that remain in the stomach are referred to as gastroretentive drug delivery systems. Gastroretentive floating tablets of norfloxcin were developed by employing three different polymers, which prolonged the drug release from the dosage forms. Tablet floatation was achieved by an effervescent mechanism. Citric acid at different concentrations was used in formulations to provide an acidic microenvironment. The prepared tablets were characterized for hardness, weight variation, thickness, friability, floating lag time, and dissolution. Around 12 tablet formulations were prepared as a continuation of the previous work. The best formulation (F4c) was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate as a radio-opaque agent. The tablets remained in the stomach for about 205 ± 8.4 min. Bioavailability studies were conducted in healthy male human volunteers, and the pharmacokinetic parameters of the best formulation were compared with that of the marketed conventional (Norbid) tablet. The increased bioavailability of the developed formulation was found to be 16.27%.

High-performance liquid chromatography determination of carvedilol in pig serum.

A simple and sensitive analytical method for quantification of carvedilol in pig serum was developed and validated. Carvedilol and internal standard (IS) were extracted into n-hexane-dichloromethane solvent system and separated using an isocratic mobile phase on a Phenomenex C(18) column. The eluent was monitored by spectroflourimetric detector at a flow rate of 1.0 mL/min. The linearity range of proposed method was 1-1000 ng/mL. The intra-day and inter-day coefficient of variation and percent error values of the assay method were less than 15%, and mean recovery was more than 89.95 and 94.27 for carvedilol and IS, respectively. The method is applicable for use in the pharmacokinetic characterization of carvedilol after administration of buccal patch (6.25 mg) in pigs.