Stability and Elasticity of Ultrathin Sphere-Patterned Block Copolymer Films.

Sphere-patterned ultrathin block copolymer films are potentially interesting for a variety of applications in nanotechnology. We use self-consistent field theory to investigate the elastic response of sphere monolayer films with respect to in-plane shear, in-plane extension, compression deformations, and bending. The relations between the in-plane elastic moduli are roughly compatible with the expectations for two-dimensional elastic systems with hexagonal symmetry, with one notable exception: The pure shear and the simple shear moduli differ from each other by roughly 20%. Even more importantly, the bending constants are found to be negative, indicating that free-standing block copolymer membranes made of only a sphere monolayer are inherently unstable above the glass transition. Our results are discussed in view of the experimental findings.

Shock compression of semiflexible polymers.

We employ molecular dynamics simulations to investigate the shock compression of linear semiflexible polymers. While the propagation velocity of a shock primarily depends on density, both chain rigidity and chain orientation significantly influence the shock width and the final temperature of the system. In general, the shock wave triggers molecular buckling in chains oriented perpendicular to the compression front. Following the passage of the front, the semiflexible chains buckle with a wavelength that decreases with the compression speed as λm ∼ up-0.2, and subsequent relaxation leads to a banana-like liquid crystal phase. In ordered systems with molecules oriented perpendicular to the compression front, the shock width increases by a factor of up to 10 compared to a similar isotropic system, resulting in enhanced shock energy absorption. These findings indicate that chain stiffness plays a critical role in the impact absorption properties of polymeric materials.

Environmentally friendly starch/alginate aerogels for copper adsorption from aqueous media. A microstructural and kinetic study.

This work investigated the synthesis and characterization of alginate/starch porous materials and their application as copper ions adsorbents from aqueous media. Initially, pregel aqueous solutions with different biopolymer concentrations (1, 3, and 5% w/w) and alginate contents (25, 50, and 75% w/w) were prepared. Hydrogel formation was performed by internal and external gelation methods. Finally, the drying step was done via CO2sc leading to aerogels and via freeze-drying leading to cryogels. Process parameters influence on the final properties of materials was evaluated by BET isotherms, SEM, EDS, and TGA. Regardless the gelation method applied, interesting materials with meso- and macro-pore structure were prepared from pregel mixtures with 3% w/w biopolymer concentration and an alginate content of only 25% w/w. Low alginate content reduces the final cost of the materials. Concerning copper removal, the adsorption data were well fitted to the pseudo-second order kinetic model for aerogels and cryogels, showing aerogels the highest adsorption capacity (40 mg/g) and removal efficiency (∼ 92%). Materials demonstrated excellent reusability throughout five consecutive adsorption/desorption cycles. Hence, environmentally friendly materials with a high practical value as low-cost bioadsorbents were synthesized, having great performance in the removal of copper ions from aqueous solution.

Velocity distributions in a gas-gun microparticle accelerator.

Here, we build and characterize a single-stage gas-gun microparticle accelerator, where a pressurized gas expands and launches particles on a target. The microparticles in the range of 60-250 µm are accelerated by the expansion of pressurized nitrogen. By using a high-speed camera, we study how the velocity distribution of accelerated particles is modified by particle size, pressure in the gas reservoir, valve's opening time, and diaphragm's thickness and composition. We employ this microparticle accelerator to study the impact of glass particles with diameters of (69 ± 6) µm accelerated at moderate velocities ∼ (10-25) m/s, using films of poly-dimethylsiloxane as targets.

Shock melting of lamellae-forming block copolymers.

While the propagation of shocks through monoatomic liquids and solids is now well understood, the response of macromolecular systems to shock compression remains far less studied. Here we use molecular dynamics simulations to study the shock compression of diblock copolymers assembled in a lamellae morphology, which may display outstanding ballistic performance. For the first time, we show that the morphologies observed after the passage of the shock resemble those observed at equilibrium, at a temperature dictated by the compression velocity. In copolymers, shock compression leads to a decrease in the lamellae period, favoring the mixing of the polymer blocks, such that strongly segregated initial morphologies evolve into less segregated phases after the passage of the shock, or can even melt into an isotropic phase for strong shocks.

Two-dimensional crystalization on spheres: Crystals grow cracked.

Here we study how curvature affects the structure of two-dimensional crystals growing on spheres. The mechanism of crystal growth is described by means of a Landau model in curved space that accounts for the excess of strain on crystal bonds caused by the substrate's curvature (packing frustration). In curved space elastic energy penalization strongly dictates the geometry of growing crystals. While compact faceted crystals are observed when elastic energy contribution can be neglected, cracked crystals with ribbonlike forms appear as the main mechanisms to reduce elastic frustration for highly curved systems.

Anomalous Slowdown of Polymer Detachment Dynamics on Carbon Nanotubes.

The "wrapping" of polymer chains on the surface of carbon nanotubes allows one to obtain multifunctional hybrid materials with unique properties for a wide range of applications in biomedicine, electronics, nanocomposites, biosensors, and solar cell technologies. We study by means of molecular dynamics simulations the force-assisted desorption kinetics of a polymer from the surface of a carbon nanotube. We find that, due to the geometric coupling between the adsorbing surface and the conformation of the macromolecule, the process of desorption slows down dramatically upon increasing the windings around the nanotube. This behavior can be rationalized in terms of an overdamped dynamics with a frictional force that increases exponentially with the number of windings of the macromolecule, resembling the Euler-Eytelwein mechanism that describes the interplay between applied tension and frictional forces on a rope wrapped around a curved surface. The results highlight the fundamental role played by the geometry to control the dynamics and mechanical stability of hybrid materials in order to tailor properties and maximize performance.

Curvature as a Guiding Field for Patterns in Thin Block Copolymer Films.

Experimental data on thin films of cylinder-forming block copolymers (BC)-free-standing BC membranes as well as supported BC films-strongly suggest that the local orientation of the BC patterns is coupled to the geometry in which the patterns are embedded. We analyze this phenomenon using general symmetry considerations and numerical self-consistent field studies of curved BC films in cylindrical geometry. The stability of the films against curvature-induced dewetting is also analyzed. In good agreement with experiments, we find that the BC cylinders tend to align along the direction of curvature at high curvatures. At low curvatures, we identify a transition from perpendicular to parallel alignment in supported films, which is absent in free-standing membranes. Hence both experiments and theory show that curvature can be used to manipulate and align BC patterns.

Thermal properties of vortices on curved surfaces.

We use Monte Carlo simulations to study the finite temperature behavior of vortices in the XY model for tangent vector order on curved backgrounds. Contrary to naive expectations, we show that the underlying geometry does not affect the proliferation of vortices with temperature respect to what is observed on a flat surface. Long-range order in these systems is analyzed by using two-point correlation functions. As expected, in the case of slightly curved substrates these correlations behave similarly to the plane. However, for high curvatures, the presence of geometry-induced unbounded vortices at low temperatures produces the rapid decay of correlations and an apparent lack of long-range order. Our results shed light on the finite-temperature physics of soft-matter systems and anisotropic magnets deposited on curved substrates.

Semiflexible Polymers in Spherical Confinement: Bipolar Orientational Order Versus Tennis Ball States.

Densely packed semiflexible polymers with contour length L confined in spheres with radius R of the same order as L cannot exhibit uniform nematic order. Depending on the chain stiffness (which we vary over a wide range), highly distorted structures form with topological defects on the sphere surface. These structures are completely different from previously observed ones of very long chains winding around the inner surface of spheres and from nematic droplets. At high densities, a thin shell of polymers close to the sphere surface exhibits a tennis ball texture due to the confinement-induced gradual bending of polymer bonds. In contrast, when the contour length of the chains is significantly smaller than the radius of the confining sphere, a few bent smectic layers form in the sphere. Molecular dynamics simulations demonstrate these complex structures, and suitable order parameters characterizing them are proposed.

Guillain-Barré syndrome in Colombia: where do we stand now?

Guillain-Barré syndrome (GBS) is a rapid-onset muscle weakness disease caused by the immune-mediated damage of the peripheral nervous system. Since there is an increase incidence of GBS cases in Latin America, particularly in Colombia, and most of them are currently preceded by Zika virus (ZIKV) infection, we aimed to assess the available evidence of the disease in Colombia through a systematic literature review. Out of 51 screened abstracts, only 16 corresponded to articles that met inclusion criteria, of which 15 were case reports or case series. A total of 796 cases of GBS were reported in the included articles. The majority of patients were males (66.8 %) and younger than 50 years old (94 %). An infectious disease before the onset of GBS was registered in 31 % of patients, with gastrointestinal or respiratory symptoms being the most frequently observed. In those cases in which electrodiagnostic tests were performed, the most common subphenotype was acute inflammatory demyelinating polyneuropathy (17 %). Death was reported in 15 % of patients. Data regarding GBS in Colombia is scant and heterogeneous. Taking into account the burden of the disease and the recent rise of GBS cases associated with ZIKV, a careful patient evaluation and a systematic collection of data are warranted. A form to data gathering is proposed.

Guillain-Barré syndrome: causes, immunopathogenic mechanisms and treatment.

INTRODUCTION: Guillain-Barré syndrome is a rare disease representing the most frequent cause of acute flaccid symmetrical weakness of the limbs and areflexia usually reaching its peak within a month. The etiology and pathogenesis remain largely enigmatic and the syndrome results in death or severe disability in 9-17% of cases despite immunotherapy. Areas covered: In terms of etiology, Guillain-Barré syndrome is linked to Campylobacter infection but less than 0.1% of infections result in the syndrome. In terms of pathogenesis, activated macrophages and T cells and serum antibodies against gangliosides are observed but their significance is unclear. Expert commentary: Guillain-Barré syndrome is a heterogeneous condition with numerous subtypes and recent data point towards the role of ganglioside epitopes by immunohistochemical methods. Ultimately, the syndrome results from a permissive genetic background on which environmental factors, including infections, vaccination and the influence of aging, lead to disease.

Wrinkles and splay conspire to give positive disclinations negative curvature.

Recently, there has been renewed interest in the coupling between geometry and topological defects in crystalline and striped systems. Standard lore dictates that positive disclinations are associated with positive Gaussian curvature, whereas negative disclinations give rise to negative curvature. Here, we present a diblock copolymer system exhibiting a striped columnar phase that preferentially forms wrinkles perpendicular to the underlying stripes. In free-standing films this wrinkling behavior induces negative Gaussian curvature to form in the vicinity of positive disclinations.

Phase nucleation in curved space.

Nucleation and growth is the dominant relaxation mechanism driving first-order phase transitions. In two-dimensional flat systems, nucleation has been applied to a wide range of problems in physics, chemistry and biology. Here we study nucleation and growth of two-dimensional phases lying on curved surfaces and show that curvature modifies both critical sizes of nuclei and paths towards the equilibrium phase. In curved space, nucleation and growth becomes inherently inhomogeneous and critical nuclei form faster on regions of positive Gaussian curvature. Substrates of varying shape display complex energy landscapes with several geometry-induced local minima, where initially propagating nuclei become stabilized and trapped by the underlying curvature.

Smectic block copolymer thin films on corrugated substrates.

In this work we study equilibrium and non-equilibrium structures of smectic block copolymer thin films deposited on a topographically patterned substrate. A Brazovskii free energy model is employed to analyze the coupling between the smectic texture and the local mean curvature of the substrate. The substrate's curvature produces out-of-plane deformations of the block copolymer such that equilibrium textures are modified and dictated by the underlying geometry. For weak curvatures it is shown that the free energy of the block copolymer film follows a Helfrich form, scaling with the square of the mean curvature, with a bending constant dependent on the local pattern orientation. On substrates of varying mean curvature simulations show that topological defects are rapidly expelled from regions with large curvature. These results compare well with available experimental data of poly(styrene)-co-poly(ethylene-alt-propylene) smectic thin films.

Defect formation and coarsening in hexagonal 2D curved crystals.

In this work we study the processes of defect formation and coarsening of two-dimensional (2D) curved crystal structures. These processes are found to strongly deviate from their counterparts in flat systems. In curved backgrounds the process of defect formation is deeply affected by the curvature, and at the onset of a phase transition the early density of defects becomes highly inhomogeneous. We observe that even a single growing crystal can produce varying densities of defects depending on its initial position and local orientation with regard to the substrate. This process is completely different from flat space, where grain boundaries are formed due to the impingement of different propagating crystals. Quenching the liquid into the crystal phase leads to the formation of a curved polycrystalline structure, characterized by complex arrays of defects. During annealing, mechanisms of geodesic curvature-driven grain boundary motion and defect annihilation lead to increasing crystalline order. Linear arrays of defects diffuse to regions of high curvature, where they are absorbed by disclinations. At the early stage of coarsening the density of dislocations is insensitive to the geometry while the population of isolated disclinations is deeply affected by curvature. The regions with high curvature act as traps for the diffusion of different structures of defects, including disclinations and domain walls.

Crystallization dynamics on curved surfaces.

We study the evolution from a liquid to a crystal phase in two-dimensional curved space. At early times, while crystal seeds grow preferentially in regions of low curvature, the lattice frustration produced in regions with high curvature is rapidly relaxed through isolated defects. Further relaxation involves a mechanism of crystal growth and defect annihilation where regions with high curvature act as sinks for the diffusion of domain walls. The pinning of grain boundaries at regions of low curvature leads to the formation of a metastable structure of defects, characterized by asymptotically slow dynamics of ordering and activation energies dictated by the largest curvatures of the system. These glassylike ordering dynamics may completely inhibit the appearance of the ground-state structures.

Defect dynamics in crystalline buckled membranes.

We study the dynamics of defect annihilation in flexible crystalline membranes suffering a symmetry-breaking phase transition. The kinetic process leading the system toward equilibrium is described through a Brazovskii-Helfrich-Canham Hamiltonian. In membranes, a negative disclination has a larger energy than a positive disclination. Here we show that this energetic asymmetry does not only affect equilibrium properties, like the Kosterlitz-Thouless transition temperature, but also plays a fundamental role in the dynamic of defects. Both unbinding of dislocations and Carraro-Nelson "antiferromagnetic" interactions between disclinations slow down the dynamics below the Lifshitz-Safran regime observed in flat hexagonal systems.

Amorphous precursors of crystallization during spinodal decomposition.

A general Landau's free energy functional is used to study the dynamics of crystallization during liquid-solid spinodal decomposition (SD). The strong length scale selectivity imposed during the early stage of SD induces the appearance of small precursors for crystallization with icosahedral order. These precursors grow in densely packed clusters of tetrahedra through the addition of new particles. As the average size of the amorphous nuclei becomes large enough to reduce geometric frustration, crystalline particles with a body-centered cubic symmetry heterogeneously nucleate on the growing clusters. The volume fraction of the crystalline phase is strongly dependent on the depth of quench. At deep quenches, the SD mechanism produces amorphous structures arranged in dense polytetrahedral aggregates.

Dynamics of dislocations in a two-dimensional block copolymer system with hexagonal symmetry.

Block copolymer thin films have attracted considerable attention for their ability to self-assemble into nanometre-scale architectures. Recent advances in the use of block copolymer thin films as nano-lithographic masks have driven research efforts in order to have better control of long-range ordering in the plane of the film. Irrespective of the method of sample preparation, different quasi-two-dimensional systems with hexagonal symmetry unavoidably contain translational defects, called dislocations. Dislocations control the process of coarsening in the nano/meso-scales and provide one of the most important mechanisms of length-scale selection in hexagonal patterns. Although in the last decade the nonlinear dynamics of topological defects in quasi-two-dimensional systems has witnessed significant progress, still little is known about the role of external fields on the creation and annihilation mechanisms involved in the relaxation process towards equilibrium states. In this paper, the dynamics of dislocations in non-optimal hexagonal patterns is studied in the framework of the Ohta-Kawasaki model for a diblock copolymer. Measurements of the climb and glide velocities as a function of the wave vector deformation reveal the main mechanisms of relaxation associated with the motion of dislocations.