Phenotypic evaluation of agronomic and root related traits for drought tolerance in recombinant inbred line population derived from a chickpea cultivar (C. arietinum L.) and its wild relative (C. reticulatum).

Drought is a major abiotic stress that drastically reduces chickpea yields. The present study was aimed to identify drought-responsive traits in chickpea by screening a recombinant inbred line population derived from an inter-specific cross between drought cultivar of GPF2 (C. arietinum L.) and drought sensitive accession of ILWC292 (C. reticulatum), at two locations in India. Twenty-one traits, including twelve morphological and physiological traits and nine root-related traits were measured under rainfed (drought-stress) and irrigated conditions (no-stress). High genotypic variation was observed among RILs for yield and root traits indicated that selection in these germplasms would be useful in achieving genetic progress. Both correlation and principal component analysis revealed that plant height, number of pods per plant, biomass, 100-seed weight, harvest index, membrane permeability index, and relative leaf water content were significantly correlated with yield under both irrigated and drought stress environments. Root length had significant positive correlations with all root-related traits except root length density in drought-stressed plants. Path analysis and multiple and stepwise regression analyses showed that number of pods per plant, biomass, and harvest index were major contributors to yield under drought stress conditions. Thus, a holistic approach across these analyses identified number of pods per plant, biomass, harvest index, and root length as key traits for improving chickpea yield through indirect selection for developing drought-tolerant cultivars. Overall, on the basis of yield components morphological and root traits, a total of 15 promising RILs were identified for their use in chickpea breeding programs for developing drought tolerant cultivars. Supplementary Information: The online version contains supplementary material available at 10.1007/s12298-022-01218-z.

Genetic mapping of QTLs for drought tolerance in chickpea (Cicer arietinum L.).

Chickpea yield is severely affected by drought stress, which is a complex quantitative trait regulated by multiple small-effect genes. Identifying genomic regions associated with drought tolerance component traits may increase our understanding of drought tolerance mechanisms and assist in the development of drought-tolerant varieties. Here, a total of 187 F8 recombinant inbred lines (RILs) developed from an interspecific cross between drought-tolerant genotype GPF 2 (Cicer arietinum) and drought-sensitive accession ILWC 292 (C. reticulatum) were evaluated to identify quantitative trait loci (QTLs) associated with drought tolerance component traits. A total of 21 traits, including 12 morpho-physiological traits and nine root-related traits, were studied under rainfed and irrigated conditions. Composite interval mapping identified 31 QTLs at Ludhiana and 23 QTLs at Faridkot locations for morphological and physiological traits, and seven QTLs were identified for root-related traits. QTL analysis identified eight consensus QTLs for six traits and five QTL clusters containing QTLs for multiple traits on linkage groups CaLG04 and CaLG06. The identified major QTLs and genomic regions associated with drought tolerance component traits can be introgressed into elite cultivars using genomics-assisted breeding to enhance drought tolerance in chickpea.

Molecular mapping of CLCuD resistance introgressed from synthetic cotton polyploid in upland cotton.

Cotton leaf curl disease (CLCuD), caused by a geminivirus complex, is the most serious disease of upland cotton in northwest India and Pakistan. It results in substantial losses in cotton yield and fibre quality. Due to continuous appearance of new viral strains, all the established CLCuD resistant stocks, extant and obsolete cultivars of upland cotton have become susceptible. Therefore, it became crucial to explore the novel sources of CLCuD resistance, as development of CLCuD resistant varieties is the most practical approach to manage this menace. Here, for the first time, we report introgression and mapping of CLCuD resistance from a 'synthetic cotton polyploid' to upland cotton. A backcross population (synthetic polyploid / Gossypium hirsutum Acc. PIL 43/G. hirsutum Acc. PIL 43) was developed for studying inheritance and mapping of CLCuD resistance. Dominance of CLCuD resistance was observed over its susceptibility. Two dominant genes were found to confer resistance to CLCuD. Molecular analysis through genotyping-by-sequencing revealed that chromosomes A01 and D07 harboured one CLCuD resistance gene each.

Identification of stable heat tolerance QTLs using inter-specific recombinant inbred line population derived from GPF 2 and ILWC 292.

Heat stress during reproductive stages has been leading to significant yield losses in chickpea (Cicer arietinum L.). With an aim of identifying the genomic regions or QTLs responsible for heat tolerance, 187 F8 recombinant inbred lines (RILs) derived from the cross GPF 2 (heat tolerant) × ILWC 292 (heat sensitive) were evaluated under late-sown irrigated (January-May) and timely-sown irrigated environments (November-April) at Ludhiana and Faridkot in Punjab, India for 13 heat tolerance related traits. The pooled ANOVA for both locations for the traits namely days to germination (DG), days to flowering initiation (DFI), days to 50% flowering (DFF), days to 100% flowering (DHF), plant height (PH), pods per plant (NPP), biomass (BIO), grain yield (YLD), 100-seed weight (HSW), harvest index (HI), membrane permeability index (MPI), relative leaf water content (RLWC) and pollen viability (PV)) showed a highly significant difference in RILs. The phenotyping data coupled with the genetic map comprising of 1365 ddRAD-Seq based SNP markers were used for identifying the QTLs for heat tolerance. Composite interval mapping provided a total of 28 and 23 QTLs, respectively at Ludhiana and Faridkot locations. Of these, 13 consensus QTLs for DG, DFI, DFF, DHF, PH, YLD, and MPI have been identified at both locations. Four QTL clusters containing QTLs for multiple traits were identified on the same genomic region at both locations. Stable QTLs for days to flowering can be one of the major factors for providing heat tolerance as early flowering has an advantage of more seed setting due to a comparatively longer reproductive period. Identified QTLs can be used in genomics-assisted breeding to develop heat stress-tolerant high yielding chickpea cultivars.

Phenotypic evaluation of genetic variability and selection of yield contributing traits in chickpea recombinant inbred line population under high temperature stress.

Heat is a major abiotic stress that drastically reduces chickpea yield. This study aimed to identify heat-responsive traits to sustain crop productivity by screening a recombinant inbred line (RILs) population at two locations in India (Ludhiana and Faridkot). The RIL population was derived from an inter-specific cross between heat-tolerant genotype GPF 2 (C. arietinum L.) and heat sensitive accession ILWC 292 (C. reticulatum). The pooled analysis of variance showed highly significant differences for all the traits in RILs and most of the traits were significantly affected by heat stress at both locations. High values of genotypic coefficient of variation (19.52-38.53%), phenotypic coefficient of variation (20.29-39.85%), heritability (92.50-93.90%), and genetic advance as a percentage of mean (38.68-76.74%) have been observed for plant height, number of pods per plant, biomass, yield, and hundred seed weight across the heat stress environments. Association studies and principal component analysis showed a significant positive correlation of plant height, number of pods per plant, biomass, hundred seed weight, harvest index, relative leaf water content, and pollen viability with yield under both timely-sown and late-sown conditions. Path analysis revealed that biomass followed by harvest index was the major contributor to yield among the environments. Both step-wise and multiple regression analyses concluded that number of pods per plant, biomass and harvest index consistently showed high level of contribution to the total variation in yield under both timely-sown and late-sown conditions. Thus, the holistic approach of these analyses illustrated that the promising traits provide a framework for developing heat-tolerant cultivars in chickpea. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s12298-021-00977-5.

Genetic analysis of some morphological traits in synthetic x naturally polyploid cotton derivatives.

Cotton has received attention of geneticists since more than a century. Gossypium hirsutum, the predominantly cultivated cotton species worldwide, has a narrow genetic base. It is important to broaden its genetic base through introgression of novel alleles from related species. Here, we report the development and characterization of a backcross population derived from the hybridization of a 'synthetic' (derived by crossing and chromosomal doubling of nonprogenitor Gossypium species) and natural tetraploid upland cotton. 'Synthetic' was observed to be male-sterile and thus, was used as the female parent. A total of 7434 flowers were pollinated to obtain 1868 BC1F1 seeds by direct and reciprocal crosses. Characterization of the experimental plant material was conducted in the field for several morphological traits such as pubescence on the stem, leaf, petiole and bract, presence/absence of petal spot, petal margin colouration and stamen filament colouration. Genetic analysis revealed that petal margin colouration phenotype was governed by a single dominant gene, whereas the petal spot and filament colouration phenotypes manifested segregation distortion. None of the BC1F1 plants was devoid of trichomes thus demonstrating that presence of trichomes is dominant over their absence. Modern upland cotton cultivars are usually devoid of petal spot, petal margin colouration and stamen filament colouration. These floral anthocyanin pigmentation characteristics, if fixed in the cotton germplasm, may serve as diagnostic features for the identification of cultivars during DUS testing as well as in the maintenance breeding programmes.