Synthesis of poly(ionic liquid-OH) mediated deacetylated chitin and its hydrogels: A study on their applications in controlled release of paracetamol and urea.

Due to the biodegradable and biocompatible nature of chitin and chitosan, they are extensively used in the synthesis of hydrogels for various applications. In this work, deacetylation of chitin is carried out with alkaline poly(dimethyldiallylammonium-hydroxide) that gave a higher amount of water-soluble chitin (with 84 % of the degree of deacetylation = chitosan0.84) compared to deacetylation using NaOH. The water-soluble chitosan0.84 is used as intercalating chains for the preparation of acrylic acid and vinylimidazole-based hydrogels. The quaternization of imidazole groups is done with 1,ω-dibromoalkanes, which sets off the crosslinking in the above polymer network. A set of three chitosan0.84 intercalated hydrogels, namely Cs-C4-hydrogel, Cs-C5-hydrogel, and Cs-C10-hydrogel are prepared bearing butyl, pentyl, and decyl chains as respective crosslinkers. The swell ratios of these intercalated hydrogels are compared with those of non-intercalated hydrogels (C4-hydrogel, C5-hydrogel, and C10-hydrogel). Chitosan0.84 intercalated Cs-C10-hydrogel has excellent swelling properties (2330 % swelling ratio) among six synthesized hydrogels. SEM analysis reveals that decyl crosslinker-bearing hydrogels are highly porous. The multi-functionality of Cs-C10-hydrogel and C10-hydrogel is explored towards -the controlled release of paracetamol/urea, and methyleneblue dye absorption. These studies disclose that chitosan0.84 intercalated hydrogels are showing superior-swelling behavior, high paracetamol/urea loading capacities and better dye entrapment than their non-intercalated counterparts.

Rapid detection strategies for the ultra-level chemosensing of uranyl ions.

A simple and reliable colorimetric probe N,N'-bis-(4-diethylamino-2-hydroxybenzylidene)-1,10-phenanthroline-2,9-carbohydrazide (L) has been synthesised by reacting 4-(diethylamino)salicylaldehyde with 1,10-phenanthroline-2,9-dicarbohydrazide. The sensing ability of L was studied by its interactions with various f-block metal ions and other selected metal ions from s- and d-block by colorimetry, UV-visible spectrophotometry, and smartphone integrated red-green-blue (RGB) model in DMSO : H2O (7 : 3, v/v). The pale-yellow colour of L turns to wine-red upon interaction with uranyl ions (UO22+) and yellow-orange in the presence of Th4+, Zr4+, Fe3+, and Lu3+ ions. Other tested metal ions did not show any colour change of L. This color change offered a simple, quick, and consistent method for the selective and sensitive visual detection of trace levels of UO22+ ions without any need for sophisticated instruments. Sensor L exhibits two absorption bands at 358 and 389 nm due to ligand-to-ligand charge transfer (LLCT). Upon interaction of L with UO22+ and Th4+ ions, absorption bands are exhibited at 480 nm and 422 nm, respectively, due to ligand-to-metal charge transfer (LMCT). The UV-vis spectral studies indicated the formation of a 1 : 2 ligand-to-metal complex between L and UO22+ with an estimated association constant of 1.0 × 104 M-2. Using L, the concentration of UO22+ can be detected as low as 73 nM and 150 nM by spectrophotometry and RGB methods, respectively, without any interference from other tested ions with an RSD < 5% (n = 3). The binding mechanism was studied by 1H NMR titration, ESI mass, and FT-IR spectral analysis and was well supported by theoretical results. Overall, sensor L demonstrates promising analytical applicability for the detection of UO22+ ions in a semi-aqueous medium.

Poly(ionic liquid) embedded particles as efficient solid phase microextraction phases of polar and aromatic analytes.

In this work, a facile preparation of SPME fibers with increased surface area is presented. The SPME fibers were prepared by grinding poly(ionic liquids) (PILs) to obtain particles of 1-16 µm and, with the aid of a silicon adhesive, attach these particles to a steel wire support. Three different PILs, poly(1-vinyl-3-benzylimidazolium-co-styrene bromide) [poly(ViBnIm-co-Sty Br)], poly(1-vinyl-3-benzylimidazolium-co-styrene bis(trifluoromethanesulfonyl)imide) [poly(ViBnIm-co-Sty TFSI)] and poly(diallyldimethylamine bis(trifluoromethanesulfonyl)imide) [poly(Pyrr11 TFSI)], were used. The first two PILs were obtained by reversible addition-fragmentation chain transfer polymerization followed by metathesis reactions. The thicknesses of the prepared fibers were found to be 19 ±â€¯4 µm and 85% of the particles used have diameters between 2 and 10 µm. The prepared fibers were tested by performing the headspace extraction of two standard solutions, one containing a mixture of alcohols with different chain lengths, and the other a mixture of aromatic compounds, leading to sorption times of 10 - 15 min due the large surface area attained with this method. PILs with aromatic moieties containing the bromide anion showed high selectivity towards polar compounds, due to the hydrogen basicity of the anion, and also towards aromatic analytes, due to the aromatic nature of styrene moieties and the cation pendant groups. The limits of detection fall in the sub ppb level, while relative standard deviations and reproducibility from fiber-to-fiber found maximums of 16.2% and 22.5%, respectively. Furthermore, the PIL based fibers showed up to 90% higher extraction efficiencies compared to the commercial fibers of polydimethylsiloxane and polyacrylate.

Highly selective CHEF-type chemosensor for lutetium (III) recognition in semi-aqueous media.

A simple phosphoryl quinolone (L) based sensor has been synthesized for the selective recognition of Lu3+ by spectrofluorimetric method. In methanol-water (1:1, v/v), the ligand L exhibits a weak emission peak at 400 nm upon excitation at 280 nm. Upon interaction with various f-metal and other selected metals from s, p, and d-block elements, the fluorescence of L is selectively enhanced in the presence of Lu3+ due to the chelation enhanced fluorescence (CHEF) effects. The quantum yield (φ) of L (φ = 0.063) is enhanced to φ = 0.118 upon chelation with Lu3+ ion. From the titration experiment, the limit of detection (LOD) of sensor L to recognize Lu3+ is estimated down to 24.2 nM, which is much lower than the WHO guidelines (76 µM) in drinking water. The formation of host-guest complexation between L and Lu3+ in 2:1 binding stoichiometry is studied by Job's method and the binding constant is estimated by band fit analysis (logKf = 5.1). Further, the coordination behaviour between L and Lu3+ is well supported by FT-IR, 1H NMR, 13C NMR, 31P NMR, ESI mass spectral data and the theoretical results.

Development of the Smartphone-Assisted Colorimetric Detection of Thorium by Using New Schiff's Base and Its Applications to Real Time Samples.

In this paper, a new Th4+ ion-selective chromogenic sensor (L) was developed by reacting 1,10-phenanthroline-2,9-dicarbohydrazide with 2-hydroxy naphthaldehyde. The sensing ability of L toward Th4+ was investigated in solution and paper strips loaded with L using spectrophotometric and colorimetric methods. The selective interaction of L was examined with various f-metal ions and other selected metal ions from s-block and d-block elements. Results show that by the colorimetric method in solution-phase dimethyl sulfoxide/H2O (7:3, v/v) and paper strip methods, the naked-eye detectable color change of L occurred from colorless solution to yellow-orange and pale yellow colour upon interacting with Th4+ and Al3+, respectively, whereas other metal ions did not interfere. The ligand L exhibits two absorbance bands at 320 and 375 nm because of ligand-to-ligand charge transfer. Upon interaction with Th4+, L undergoes red shift of both absorption bands and the formation of a new UV-vis band at 335 and 440 nm. The UV-visible spectral studies indicate the formation of a 1:1 host-guest complex between L and Th4+ with an association constant of 4.7 × 103 M-1. The limit of quantification and limit of detection of L for the analysis of Th4+ are found to be 167 and 50 nM, respectively. The visually detectable color change of L has been well integrated with a smartphone RGB color value to make it an analytical signal for real-time analysis of Th4+ with the detection limit down to 116 nM. Besides, L was applied for the analysis of Th4+ content present in various real water samples, monazite, and lantern mantle samples by spectrophotometry and RGB color values. The binding mode of L with Th4+ is investigated by 1H NMR, electrospray ionization-mass, and theoretical studies.

Aminophosphine Oxides: A Platform for Diversified Functions.

This review summarizes significant contributions reported on aminophosphine oxides (AmPOs), specifically those containing at least one amino group present as amino substituents on α- and ß-carbons including direct P-N bond containing molecules. AmPOs have additional 'N' site(s), including highly basic 'P=O' groups, and these features make favor smooth and unexpected behavior. The most striking manifestations of flexibility of AmPOs are that they are exciting ligand systems for the coordination chemistry of actinides, and their involvement in catalytic organic reactions including enantioselective opening of meso-epoxides, addition of silyl enol ethers, allylation with allyltributylstannane, etc. The diverse properties of the AmPOs and their metal complexes demonstrate both the scope and complexity of these systems, depending on the basicity of phosphoryl group, and nature of the substituents on the pentavalent tetracoordinate phosphorus atom and metal. Two components key to understanding the challenges of actinide separations are detailed here, namely, previously described separation methods, and recent investigations into the fundamental coordination chemistry of actinides. Both are aimed at probing the critical features necessary for improved selectivity of separations. This review leads to the conclusion that, although many AmPOs have already been discovered and developed over the past century, many opportunities nevertheless exist for further developments towards new extraction processes and new catalytic materials by fine tuning the electronic and steric properties of substituents on the central phosphorus atom.

Biophysical characterization and molecular docking studies of imidazolium based polyelectrolytes-DNA complexes: role of hydrophobicity.

Nonviral gene delivery vectors are acquiring greater attention in the field of gene therapy by replacing the biological viral vectors. DNA-cationic polymer complexes are one of the most promising systems to find application in gene therapy. Hence, a complete insight of their biophysical characterization and binding energy profile is important in understanding the mechanism involved in nonviral gene therapy. In this investigation, the interaction between calf thymus DNA (ctDNA) and imidazolium-based poly(ionic liquids) (PILs) also known as polyelectrolytes with three different alkyl side chains (ethyl, butyl, and hexyl) in physiological conditions using various spectroscopic experiments with constant DNA concentration and varying polyelectrolyte concentrations is reported. UV-visible absorption, fluorescence quenching studies, gel electrophoresis, circular dichroism (CD), and Fourier transform infrared spectroscopy (FTIR) have confirmed the binding of polyelectrolytes with DNA. UV-vis absorption measurements and fluorescence quenching revealed that the binding between DNA and the polyelectrolyte is dominated by electrostatic interactions. Additionally, CD and FTIR results indicated that the DNA retained its B-form with minor perturbation in the phosphate backbone without significant change in the conformation of its base pairs. Preference for alkyl side chains (K(PIL-Ethyl Br) < K(PIL-Butyl Br) < K(PIL-Hexyl Br)) toward efficient binding between the polyelectrolyte and DNA was inferred from the binding and quenching constants calculated from the absorption and emission spectra, respectively. Further, in silico molecular docking studies not only validated the observed binding trend but also provided insight into the binding mode of the polyelectrolyte-DNA complex.

Evaluation of DNA binding with some selected hydrazide and semicarbazide derivatives.

A group of hydrazide and semicarbazide derivatives containing isopropylidene, benzylidene, cyclohexylidene, and phospholidene groups was synthesized and characterized by spectroscopic techniques. These compounds were tested for DNA interaction studies monitored by UV-Vis and IR data as well as molecular docking. Investigations on interactions of these compounds with DNA revealed an intercalative mode of binding between them. It is interesting to note that semicarbazide derivatives with aliphatic substituents showed better DNA binding than the aromatic substituents.