Editorial for the Special Issue on "Process Intensification Techniques for the Production of Nanoparticles".

According to ISO/TS 80004, a nanomaterial is defined as the "material with any external dimension in the nanoscale or having internal structure or surface structure in the nanoscale", with nanoscale defined as the "length range approximately from 1 nm to 100 nm" [...].

Multi wall carbon nanotubes application for treatment of Cr(VI)-contaminated groundwater; Modeling of batch & column experiments.

Multi wall carbon nanotubes (MWCNTs) are carbonaceous nanomaterials with novel adsorption properties. In this study MWCNTs were used as adsorbents for hexavalent chromium, Cr(VI), and the influence of operating parameters, on adsorption process, such as pH, MWCNTs and Cr(VI) concentration, and contact time have been investigated. Batch and column experiments were carried out in order to investigate the removal efficiency of MWCNTs for different Cr(VI) concentrations related to groundwater polluted by either anthropogenic activities or by geogenic processes. The experimental results showed that pH was the most crucial factor for adsorption efficiency. Cr(VI) adsorption was inversely proportional with pH value and more specifically adsorption was significantly decreased for pH values higher than 7. The effect of adsorbent's concentration showed the high adsorption capacity of MWCNTs. The adsorption process was very fast since was almost completed within 1 h. Different isotherm models have been adopted to interpret the experimental equilibrium data, as well as two mass-transfer based model were used to describe the dynamic behavior of Cr(VI) sorption phenomenon in column experiments.

P-aminophenol catalysed production on supported nano-magnetite particles in fixed-bed reactor: Kinetic modelling and scale-up.

The aim of this work was to investigate on the possibility to use nano-magnetite particles supported on waste biomass as heterogeneous catalyst for the production of p-aminophenol starting from a well-known pollutant, p-nitrophenol, in fixed-bed reactors. The kinetic and the thermodynamic of the process was firstly studied in batch system, subsequently a first scale-up was performed using a glass column packed with the supported catalyst. The experimental data obtained with the column were interpreted in light of a suitable dynamic model. The Langmuir-Hinshelwood mechanism well described the process, obtaining from the data fitting a surface rate kinetic constant k = 2.68 × 10-6 mol/m2·h, an adsorption equilibrium constants for PNP and BH4- species equal to 20.07 l/mol and 1.83 l/mol, at 25 °C. The Eyring equation was used to fit the apparent kintic constant variation with the temperature, to estimate thermodynamic parameters, obtaining a ΔH = - 1145.68 kJ/mol and ΔS = -315.02 kJ/K·mol. The process was then simulated in PROII environment, investigating the influence of initial PNP flowrate, NaBH4/PNP and reactor length/diameter ratios on PNP conversion, on required duty to maintain isothermal conditions and on pressure drops in the reactor.

Remediation of hexavalent chromium contaminated water through zero-valent iron nanoparticles and effects on tomato plant growth performance.

Contaminated water with hexavalent chromium Cr(VI) is a serious environmental problem. This study aimed to evaluate the Cr(VI) removal by zero valent iron nanoparticles (nZVI) reduction process and the impact of Cr(VI), nZVI and combined treatment with nZVI and Cr(VI) on tomato growth performance. To evaluate the Cr(VI) toxic effect on germination capability, seeds were exposed to increasing Cr(VI) concentrations up to 1000 mg L-1. The inhibition of seed germination and the decrease of hypocotyl and root length started from Cr(VI) 5 mg L-1. Under treatment with Cr(VI) + nZVI 5 mg L-1, seed germination, hypocotyl and root length resulted significantly higher compared to Cr(VI) 5 mg L-1 treatment. The impact of only nZVI was investigated on chlorophyll and carotenoid in leaves; iron levels in leaves, roots, fruits and soil; carotenoid, fat-soluble vitamin and nicotianamine in mature fruits. A significant increase of leaf chlorophyll and carotenoids was observed after nZVI 5 mg L-1 treatment compared to controls. No significant variations were observed in carotenoids, fat-soluble vitamins and nicotianamine levels after treatment with nZVI 5 mg L-1 in mature fruits. For their ability to reduce Cr(VI) and to stimulate tomato growth, nZVI might to be considered as alternative for remediation purposes.

A physical-based interpretation of mechanism and kinetics of Cr(VI) reduction in aqueous solution by zero-valent iron nanoparticles.

The aim of this paper is to show the results obtained by investigating the reduction of hexavalent Chromium [Cr(VI)] by iron nano-particles in aqueous solution, interpreted in light of the particle-grain model. The diffusional and geometric parameters that govern and describe the reacting system were estimated from the evidences deriving from the characterization and the experiments conducted, allowing assumptions based on physical principles. Such procedure rendered the particle-grain model a valid choice for the interpretation of the results obtained. The model, used in its dimensionless form, was tested according to a preliminary procedure aimed at analyzing the sensitivity of the system, by varying within wide ranges the ratio between the reaction rate, the diffusive mass transfer rate, and the particle-grain radius, to show how reliable its potential application may be. Subsequently, a non-linear regression procedure was used to estimate the two main parameters of the model that affect the reduction process: (i) the diffusion coefficient within the solid layer produced along with the reaction, Dpc (6.02 E-13 m2 s-1), and (ii) the kinetic constant of the surface reaction, kc (0.21 m s-1). The values found for the parameters were perfectly in line with theoretical considerations and experimental evidences.

Kinetic Modeling of Cr(VI) Reduction by nZVI in Soil: The Influence of Organic Matter and Manganese Oxide.

The effect of soil composition on the reduction of hexavalent chromium (Cr(VI)) by zero valent iron nanoparticles was studied. A model was proposed, to investigate both the effect of manganese oxide and the simultaneous effect of manganese dioxide and soil organic matter on the kinetic of Cr(VI) reduction. Fe(0) nanoparticles consumption by the reaction with dissolved oxygen, water and soluble Cr(VI) was taken into account. The model was validated through experimental tests performed on soil samples collected at an industrial polluted site, and on artificially contaminated samples from the same site, in the presence of selected amount of leonardite.

Process Intensification Techniques for the Production of Nano- and Submicronic Particles for Food and Medical Applications.

BACKGROUND: Nowadays, nanoparticles are of great interest for the industry due to their numerous possible applications in several fields. Research on this topic seeks to develop many procedures to produce nanoparticles, mostly at lab scale, batch-wise and with low yield. These procedures generally do not suit industrial needs of continuous, high capacity production. Moreover, the product characteristics require targeting narrow particle size distributions and high quality, which is difficult to achieve by traditional equipment. METHODS: Process intensification techniques aim to minimize plant size of continuous, high yield equipment capable to produce specific sized, high quality nanoparticles, combined with an increase in energy efficiency, safety and cost reduction. DISCUSSION: This paper reviews some adopted Process Intensification (PI) techniques for nanoparticles synthesis processes employed in the food and pharmaceutical sector. CONCLUSION: By reducing the technology transfer gap, nanotechnologies may become convenient and feasible, allowing both industries to achieve the production of higher quality products with particular characteristics without sensibly increasing additional costs. This will represent in the next future a strategic key feature of industries in the global market.

Nanomaterials application for heavy metals recovery from polluted water: The combination of nano zero-valent iron and carbon nanotubes. Competitive adsorption non-linear modeling.

Carbon Nanotubes (CNTs) and nano Zero-Valent Iron (nZVI) particles, as well as two nanocomposites based on these novel nanomaterials, were employed as nano-adsorbents for the removal of hexavalent chromium, selenium and cobalt, from aqueous solutions. Nanomaterials characterization included the determination of their point of zero charge and particle size distribution. CNTs were further analyzed using scanning electron microscopy, thermogravimetric analysis and Raman spectroscopy to determine their morphology and structural properties. Batch experiments were carried out to investigate the removal efficiency and the possible competitive interactions among metal ions. Adsorption was found to be the main removal mechanism, except for Cr(VI) treatment by nZVI, where reduction was the predominant mechanism. The removal efficiency was estimated in decreasing order as CNTs-nZVI > nZVI > CNTs > CNTs-nZVI* independently upon the tested heavy metal. In the case of competitive adsorption, Cr(VI) exhibited the highest affinity for every adsorbent. The preferable Cr(VI) removal was also observed using binary systems of the tested metals by means of the CNTs-nZVI nanocomposite. Single species adsorption was better described by the non-linear Sips model, whilst competitive adsorption followed the modified Langmuir model. The CNTs-nZVI nanocomposite was tested for its reusability, and showed high adsorption efficiency (the qmax values decreased less than 50% with respect to the first use) even after three cycles of use.

Kinetic Study of Nitrate Removal from Aqueous Solutions Using Copper-Coated Iron Nanoparticles.

Nitrates are considered hazard compounds for human health due to their tendency to be reduced to nitrites, in particular in reducing environment. Nano zero valent iron (nZVI) represents an efficient and low-cost adsorbent/reductive agent for nitrate removal from groundwater and wastewaters and a little addition of a second metal species (Cu, Pd, Ni, Ag) has proven to increase process effectiveness, by enhancing stability and oxidation resistance of nanoparticles. In this work Cu/Fe nanoparticles were loaded in a NO3- solution (100 mg L-1) and the removal efficiency was tested by monitoring nitrate concentration at selected time intervals. Results showed that the nitrate removal process involves both reduction and adsorption processes: the removal mechanism has been investigated, and the pseudo-first-order and pseudo-second-order-adsorption kinetic models were successfully tested.