Meta-analysis review for pilot and large-scale constructed wetlands: Design parameters, treatment performance, and influencing factors.

Despite their longstanding use in environmental remediation, constructed wetlands (CWs) are still topical due to their sustainable and nature-based approach. While research and review publications have grown annually by 7.5 % and 37.6 %, respectively, from 2018 to 2022, a quantitative meta-analysis employing advanced statistics and machine learning to assess CWs has not yet been conducted. Further, traditional statistics of mean ± standard deviation could not convey the extent of confidence or uncertainty in results from CW studies. This study employed a 95 % bootstrap-based confidence interval and out-of-bag Random Forest-based driver analysis on data from 55 studies, totaling 163 cases of pilot and full-scale CWs. The study recommends, with 95 % confidence, median surface hydraulic loading rates (HLR) of 0.14 [0.11, 0.17] m/d for vertical flow-CWs (VF) and 0.13 [0.07, 0.22] m/d for horizontal flow-CWs (HF), and hydraulic retention time (HRT) of 125.14 [48.0, 189.6] h for VF, 72.00 [42.00, 86.28] h for HF, as practical for new CW design. Permutation importance results indicate influent COD impacted primarily on COD removal rate at 21.58 %, followed by HLR (16.03 %), HRT (12.12 %), and substrate height (H) (10.90 %). For TN treatment, influent TN and COD were the most significant contributors at 12.89 % and 10.01 %, respectively, while H (9.76 %), HRT (9.72 %), and HLR (5.87 %) had lower impacts. Surprisingly, while HRT and H had a limited effect on COD removal, they substantially influenced TN. This study sheds light on CWs' performance, design, and control factors, guiding their operation and optimization.

Emerging revolving algae biofilm system for algal biomass production and nutrient recovery from wastewater.

Toward the direction of zero­carbon emission and green technologies for wastewater treatment, algae-based technologies are considered promising candidates to deal with the current situation of pollution and climate change. Recent developments of algae-based technologies have been introduced in previous studies in which their performances were optimized for wastewater treatment and biomass production. Among these, revolving algae biofilm (RAB) reactors have been proven to have a great potential in high biomass productivity, simple harvesting method, great CO2 transfer rate, high light-use efficiency, heavy metal capture, nutrient removal, and acid mine drainage treatment in previous studies. However, there were few articles detailing RAB performance, which concealed its enormous potential and diminished interest in the model. Hence, this review aims to reveal the major benefit of RAB reactors in simultaneous wastewater treatment and biomass cultivation. However, there is still a lack of research on aspects to upgrade this technology which requires further investigations to improve performance or fulfill the concept of circular economy.

Biochar for soil remediation: A comprehensive review of current research on pollutant removal.

Biochar usage in soil remediation has turned out to be an enticing topic recently. Biochar, a product formed by pyrolysis of organic waste, which is rich in carbon, has the aptitude to ameliorate climate change by sequestering carbon while also enhancing soil quality and crop yields. Two-edged implications of biochar on soil amendment are still being discussed yet, clarity on the long-term implications of biochar on soil health and the environment is not yet achieved. As a result, it is crucial to systematically uncover the pertinent information regarding biochar remediation, as this can serve as a roadmap for future research on using biochar to remediate contaminated soils in mining regions. This review endeavors to bring forth run thoroughly the latest state of research on the use of biochar in soil remediation, along with its potential benefits, limitations, challenges, and future scope. By synthesizing existing literature on biochar soil remediation, this review aims to provide insights into the potential of biochar as a sustainable solution for soil remediation. Specifically, this review will highlight the key factors that influence the effectiveness of biochar for soil remediation and the potential risks associated with its use, as well as the current gaps in knowledge and future research directions.

Accumulation degree and risk assessment of metals in street dust from a developing city in Central Taiwan.

Due to the numerous industrial parks and high traffic density in Miaoli, Taiwan, large amounts of metals may be released into the atmosphere, accumulating in street dust. Therefore, this study aimed to collect street dust in Miaoli to quantify the metals and assess the accumulation degree, sources, and potential risks. The enrichment factor (EF), geological accumulation index (Igeo), ecological risk, and non-carcinogenic and lifetime carcinogenic risk were estimated to assess the accumulation degree and the potential environmental and health risks. Pearson correlation analysis, principal component analysis, and positive matrix factor model were used to clarify the relationship between levels of metals and identify possible sources. The levels of metals in street dust in order were Fe > Zn > Mn > Cu > Cr > Ni > Pb > Sr > Co > Sb. According to Igeo, the level of Ni indicated moderately polluted. The levels of Zn, Cu, and Pb showed moderate to strong pollution, strong pollution, and very strong pollution, respectively. Results of average ecological risk analysis pointed out that Pb and Cu represent a very high risk, while other metals posed low-to moderate-level ecological risks. Excluding the Steel Enterprise area, based on the EF value and source identification, it might be concluded that Co, Sr, Fe, Mn, and Sb were mainly from natural sources, while Cu, Pb, and Zn come from anthropogenic pollution sources. Based on the results of the risk assessments, most metals pose no serious adverse health risk to humans. But, in comparison to Miaoli townships, the health risks of residents living in the Steel Enterprise area were higher. However, given that children and adolescents exposure to Co, Cr, Pb, and Ni together constitute a relatively higher carcinogenic risk (CR > 10-6), more attention needs to be paid to the populations most susceptible.

A new snake of the genus Dendrelaphis Boulenger, 1890 (Squamata: Colubridae) from the coastal area of southern Vietnam.

We describe a new species of Dendrelaphis from the coastal area in southern Vietnam based on morphological data and nucleotide sequences from one partial mitochondrial gene (Cytb). Dendrelaphis binhi sp. nov. is diagnosed by the following morphological characters: body scale rows 13 at neck and midbody, 9-11 before vent; vertebral scale row feebly enlarged; ventrals 154-158 in males and 161-170 in females; subcaudals 95-106 in males and 95-102 in females; one supralabial touching the eye; 18 or 19 maxillary teeth; hemipenis spinose, reaching 10th or 11th SC, with a slender papilla; cloacal plate divided; dorsum dark brown; and a white stripe along the lower flank. The new species differs from its congeners by an uncorrected p-distance in Cytb sequences of at least 8.1%.

Pollution characteristics, associated risks, and possible sources of heavy metals in road dust collected from different areas of a metropolis in Vietnam.

Road dust samples were collected from different areas in Ho Chi Minh City (HCMC)-the largest city in Vietnam to explore pollution characteristics, ecological and human health risks, and sources of heavy metals (HMs). Results revealed the level of HMs found in the samples from residential and industrial zones of HCMC in the order of Mn > Zn > Cu > Cr > Pb > Ni > Co > As > Cd, Zn > Mn > Cu > Cr > Pb > Ni > Co > As > Cd. Due to the high enrichment of Cu, Zn in residential areas and Cu, Pb, Zn in industrial areas, the HM contamination in these areas remained moderate to severe. The findings also revealed a rising trend in the level of HMs in road dust from the east to the west of HCMC, and a heavy metal contamination hotspot in the west. In addition, industrial areas were more contaminated with HMs, posing greater associated risks than residential areas. Children living in urban areas of HCMC were found to be exposed to unacceptable health risks. Meanwhile, adults living in industrial areas face intolerable cancer risk. Among the nine HMs, Cd, Pb, and Cu posed the greatest ecological risk, while Cr and As were the main culprits behind health risks. HMs in road dust might derive from non-exhaust vehicular emissions, crustal materials, and industrial activities. The results suggested that industrial areas to the west of HCMC should focus more on reducing and controlling severe pollution of HMs.

Pilot and full scale applications of floating treatment wetlands for treating diffuse pollution.

Floating treatment wetlands (FTW) are nature-based solutions for the purification of open water systems such as rivers, ponds, and lakes polluted by diffuse sources as untreated or partially treated domestic wastewater and agricultural run-off. Compared with other physicochemical and biological technologies, FTW is a technology with low-cost, simple configuration, easy to operate; has a relatively high efficiency, and is energy-saving, and aesthetic. Water remediation in FTWs is supported by plant uptake and the growth of a biofilm on the water plant roots, so the selection of the macrophyte species is critical, not only to pollutant removal but also to the local ecosystem integrity, especially for full-scale implementation. The key factors such as buoyant frame/raft, plant growth support media, water depth, seasonal variation, and temperature have a considerable role in the design, operation, maintenance, and pollutant treatment performance of FTW. Harvesting is a necessary process to maintain efficient operation by limiting the re-pollution of plants in the decay phase. Furthermore, the harvested plant biomass can serve as a green source for the recovery of energy and value-added products.

Seasonal influence on pollution index and risk of multiple compositions of microplastics in an urban river.

Emerging contaminant microplastics (MPs) are getting worldwide attention for their ubiquitous occurrence and potential risk to the environment. However, the seasonal influence on freshwater MP pollution remains poorly understood. To better understand and evaluate the riverine MPs in different seasons, this study conducted the risk assessment of MPs in an urban river, Houjin River, during the different seasons. The present study found that the MPs (0.1-5 mm, mostly 0.1-2 mm) were more abundant in the dry season (183.33 ± 128.95 items/m3) compared with the wet season (102.08 ± 45.80 items/m3). Similarly, the mixture of different MPs polymers was more diverse in the dry season. The related pollution indices such as the contamination factor (CF) and pollution load index (PLI) showed that average CF and PLI were 5.15 and 2.10 in the dry season, which significantly decreased to 1.58 and 1.25, respectively, in the wet season (p < 0.05). Additionally, significant difference of the average risk quotient (RQ) was observed, which was 0.037 in the dry season and 0.021 in the wet season (p < 0.05). To sum up, the results of this study indicate the seasonal effects on the pollution and risk of multiple compositions of MPs in the urban river, suggesting higher impacts of riverine MPs pollution in the dry season, as well as the potential increase of MPs, may lead to environmental risk in the future.

Effect of biomass retention time on performance and fouling of a stirred membrane photobioreactor.

Co-culture of microalgae-activated sludge has the potential to purify wastewater while reduce energy demand from aeration. In this work, a mechanically stirred membrane photobioreactor (stirred-MPBR) was used to evaluate the impact of the biomass retention time (BRT) on the treatment performance and membrane fouling. Results showed that stirred-MPBR was affected by BRT during treating domestic wastewater at a flux of 16.5 L m-2 h-1. The highest productivity was attained at BRT 7d (102 mg L-1 d-1), followed by BRT 10d (86 mg L-1 d-1), BRT 5d (85 mg L-1 d-1), and BRT 3d (83 mg L-1 d-1). Statistical analysis results showed that BRT 7d had a higher COD removal rate than BRT 10d, however, there is no difference in total nitrogen removal rate. The highest TP removal occurred when the biomass operated at BRT as short as 3d. Reduced BRTs caused a change in the microalgae-activated sludge biomass fraction that encouraged nitrification activity while simultaneously contributing to a higher fouling rate. The bound protein concentrations dropped from 31.35 mg L-1 (BRT 10d) to 10.67 mg L-1 (BRT 3d), while soluble polysaccharides increased from 0.99 to 1.82 mg L-1, respectively. The concentrations of extracellular polymeric substance fractions were significantly altered, which decreased the mean floc size and contributed to the escalating fouling propensity. At the optimum BRT of 7d, the stirred-MPBR showed sufficient access to light and nutrients exchange for mutualistic interactions between the microalgae and activated sludge.

An overview of deploying membrane bioreactors in saline wastewater treatment from perspectives of microbial and treatment performance.

The discharged saline wastewater has severely influenced the aquatic environment as the treatment performance of many wastewater treatment techniques is limited. In addition, the sources of saline wastewater are also plentiful from agricultural and various industrial fields such as food processing, tannery, pharmaceutical, etc. Although high salinity levels negatively impact the performance of both physicochemical and biological processes, membrane bioreactor (MBR) processes are considered as a potential technology to treat saline wastewater under different salinity levels depending on the adaption of the microbial community. Therefore, this study aims to systematically review the application of MBR widely used in the saline wastewater treatment from the perspectives of microbial structure and treatment efficiencies. At last, the concept of carbon dioxide capture and storage will be proposed for the MBR-treating saline wastewater technologies and considered toward the circular economy with the target of zero emission.

Influence of C/N ratios on treatment performance and biomass production during co-culture of microalgae and activated sludge.

Novel phycosphere associated bacteria processes are being regarded as a potential and cost-effective strategy for controlling anthropogenic contaminants in wastewater treatment. However, the underlying concern with the process is its vulnerability to improper organic or nutrient intake. This study established a synergistic interaction between microalgae and activated sludge in a three-photobioreactor system (without external aeration) to understand how pollutants could be mitigated whilst simultaneously yielding biomass under different C/N ratios of 1:1, 5:1 and 10:1. The result showed that the superior biomass productivity was facilitated at a C/N ratio of 5:1 (106 mg L-1 d-1), and the high degradation rate constants (kCOD = 0.25 d-1, kTN = 0.29 d-1, kTP = 0.35 d-1) was approximated using a first-order kinetic model. The removal of pollutants was remarkably high, exceeding 90% (COD), 93% (TN), and 96% (TP). Nevertheless, the C/N ratio of 1:1 resulted in a threefold drop in biomass-specific growth rate (µ = 0.07 d-1). Microalgal assimilation, followed by bacterial denitrification, is the major pathway of removing total nitrogen when the C/N ratio exceeds 5:1. Activated sludge plays an important role in improving microalgae tolerance to high concentration of ammonia nitrogen and boosting nitrification (light phase) and denitrification (dark phase). The use of phycosphere associated bacteria could be a promising strategy for controlling nutrients pollution and other environmental considerations in wastewater.

Adsorption of norfloxacin from aqueous solution on biochar derived from spent coffee ground: Master variables and response surface method optimized adsorption process.

In this study, biochar derived from spent coffee grounds (SCGB) was used to adsorb norfloxacin (NOR) in water. The biochar properties were interpreted by analysis of the specific surface area, morphology, structure, thermal stability, and functional groups. The impacts of pH, NOR, and ion's present on SCGB performance were examined. The NOR adsorption mode of SCGB is best suited to the Langmuir model (R2 = 0.974) with maximum absorption capacity (69.8 mg g-1). By using a Response Surface Method (RSM), optimal adsorption was also found at pH of 6.26, NOR of 24.69 mg L-1, and SCGB of 1.32 g L-1. Compared with biochars derived from agriculture such as corn stalks, willow branches, potato stem, reed stalks, cauliflower roots, wheat straw, the NOR adsorption capacity of SCGB was 2-30 times higher, but less than 3-4 times for biochars made from Salix mongolica, luffa sponge and polydopamine microspheres. These findings reveal that spent coffee grounds biochar could effectively remove NOR from aqueous solutions. Approaching biochar derived from coffee grounds would be a promising eco-friendly solution because it utilizes solid waste, saves costs, and creates adsorbents to deal with emerging pollutants like antibiotics.

A new species of the genus Oligodon Fitzinger, 1826 (Squamata: Colubridae) from Langbian Plateau, Vietnam.

We describe a new species of kukri snake from Da Lat City and its vicinity in Lam Dong Province, southern Vietnam on the basis of morphological characters of four specimens, including two males and two females. Oligodon tuani sp. nov. differs from other congeners by a combination of the following characters: large size in adults (TL ≤ 888 mm); 19 dorsal scale rows at midbody; ventrals 173-179 in males and 187-193 in females; subcaudals 58 or 59 in males and 44 or 45 in females; presubocular present; 8 supralabials, fourth and fifth entering orbit; cloacal plate undivided; 10 maxillary teeth, posterior three enlarged; vertebral stripe present; temporal streak present but faint and interrupted; long and deeply forked hemipenes, extending to 25th subcaudal, without spines and papillae; and 13-15+3-4 dorsal blotches.

Submerged membrane filtration process coupled with powdered activated carbon for nonylphenol ethoxylates removal.

A combination of a submerged membrane filtration system and powdered activated carbon (PAC) was investigated for nonylphenol ethoxylates removal. Both filtration flux and initial powdered activated carbon dosage had significant effects on the micropollutants removal efficiency. The best performance was achieved under the filtration flux of 20 L/m2.h and the initial powdered activated carbon of 50 mg/L. The removal efficiencies of nonylphenol ethoxylates was obtained at 75±5% in the first 60 hours, and then decreased at 55±7% and 23±11% in the following hours, respectively. As observed, over 65% of dissolved organic carbon mass adsorbed into powdered activated carbon that was suspended in the bulk phase, and the remainder was adsorbed into powdered activated carbon that deposited on the membrane surface. It reveals that the combination between submerged membrane filtration and PAC could be an effective solution for enhancing removal of micropollutants from water.

Contamination, source attribution, and potential health risks of heavy metals in street dust of a metropolitan area in Southern Vietnam.

This study investigates distribution, pollution indices, and potential risk assessment for human health and ecology of eight heavy metals in twenty-five street dust samples collected from metropolitan area-Ho Chi Minh City, Vietnam. Results showed that Zn was of the highest concentration (466.4 ± 236.5 mg/kg), followed by Mn (393.9 ± 93.2 mg/kg), Cu (153.7 ± 64.7 mg/kg), Cr (102.4 ± 50.5 mg/kg), Pb (49.6 ± 21.4 mg/kg), Ni (36.2 ± 15.4 mg/kg), Co (7.9 ± 1.9 mg/kg), and Cd (0.5 ± 0.5 mg/kg). The principal component analysis revealed that three sources of heavy metals measured in street dust include vehicular activities (32.38%), mixed source of vehicular and residential activities (26.72%), and mixture of industrial and natural sources (20.23%). The geo-accumulation index values showed levels of non-pollution to moderately pollution for Mn and Co; moderately pollution for Ni; moderately to strongly pollution for Cd, Cr, and Pb; and strongly pollution for Cu and Zn. The potential ecological risk values of all sampling sites were close to the high-risk category. Zn (28.9%), Cu (25.4%), and Mn (24.4%) dominantly contributed to the ecological risk. For non-carcinogenic risk, the hazard quotient values for both children and adults were within a safety level. For carcinogenic risk, the TCRChildren was about 3 times higher than TCRAdults, but still within a tolerable limit (1 × 10-6 to 1 × 10-4) of cancer risk. Cr was a major contribution to potential risks in humans. Such studies on heavy metal in street dust are crucial but are still limited in Vietnam/or metropolitan area in Southeast Asia. Therefore, this study can fill the information gap about heavy metal contaminated street dust in a metropolitan area of Vietnam.

A new skink of the genus emSubdoluseps/em Freitas, Datta-Roy, Karanth, Grismer amp; Siler, 2019 (Squamata: Scincidae) from southern Vietnam.

We describe a new species of the genus Subdoluseps Freitas, Datta-Roy, Karanth, Grismer Siler from a coastal area in southern Vietnam. Subdoluseps vietnamensis sp. nov. is characterized by the following morphological characters: medium size in adults (snout-vent length up to 48.7 mm); tail length/snout-vent length ratio 1.04; toes not reaching finger when limbs adpressed; 27-30 midbody scale rows, smooth; 55-57 paravertebral scales; 55-62 ventral scale rows; 64-74 subcaudal scales; frontoparietal scale single; four supraoculars; prefrontals not in contact with one another; two loreal scales; seven supralabials; ear-opening with two lobules on the anterior border; smooth lamellae beneath finger III 9 or 10 and toe IV 12-15; six enlarged precloacal scales; and four distinct black stripes on dorsum. The new species differs genetically from its closest congeners, S. bowringii (Günther) and S. frontoparietale (Taylor), by uncorrected p-distances of 10.0% and 9.5%, respectively in ND1 sequences, and clusters into the same matriline with these two congeners on the phylogenetic trees.

Arsenic-contaminated groundwater and its potential health risk: A case study in Long An and Tien Giang provinces of the Mekong Delta, Vietnam.

The occurrence of arsenic (As) in groundwater (drilled well water) that were used for drinking, cooking, and personal hygiene and its risks to human health in Long An and Tien Giang provinces (Mekong delta, Vietnam) were evaluated in this study. The average As concentrations were 15.92 ± 11.4 µg/L (n = 24, Long An) and 4.95 ± 4.7 µg/L (n = 24, Tien Giang). The average concentrations of As in Long An had not reached the WHO and QCVN 01: 2009/BYT healthy drinking water standard (10 µg/L). When used as a source of water for drinking and daily activities, arsenic-contaminated groundwater may have a direct impact on human health. The risk assessment from groundwater established by the US Environmental Protection Agency (USEPA) was conducted. The risk assessment showed that the average cancer risk (CR) values were 8.68 × 10-4 (adults) and 2.39 × 10-3 (children) for Long An, and 2.70 × 10-4 (adults) and 7.43 × 10-4 (children) for Tien Giang. These results were significantly higher than the CR (1 × 10-4) proposed by the USEPA. The adverse health effect was therefore specifically warned by the use of arsenic-contaminated groundwater. This research offers valuable knowledge for efficient water management approaches to guarantee local communities' health protection.

Co-culture of microalgae-activated sludge for wastewater treatment and biomass production: Exploring their role under different inoculation ratios.

In this study, mixed culture (microalgae:activated sludge) of a photobioreactor (PBR) were investigated at different inoculation ratios (1:0, 9:1, 3:1, 1:1, 0:1 wt/wt). This work was not only to determine the optimal ratio for pollutant remediation and biomass production but also to explore the role of microorganisms in the co-culture system. The results showed high total biomass concentrations were obtained from 1:0 and 3:1 ratio being values of 1.06, 1.12 g L-1, respectively. Microalgae played a dominant role in nitrogen removal via biological assimilation while activated sludge was responsible for improving COD removal. Compared with the single culture of microalgae, the symbiosis between microalgae and bacteria occurred at 3:1 and 1:1 ratio facilitated a higher COD removal by 37.5-45.7 %. In general, combined assessment based on treatment performance and biomass productivity facilitated to select an optimal ratio of 3:1 for the operation of the co-culture PBR.

Acetaminophen micropollutant: Historical and current occurrences, toxicity, removal strategies and transformation pathways in different environments.

Acetaminophen (ACT) is commonly used as a counter painkiller and nowadays, it is increasingly present in the natural water environment. Although its concentrations are usually at the ppt to ppm levels, ACT can transform into various intermediates depending on the environmental conditions. Due to the complexity of the ACT degradation products and the intermediates, it poses a major challenge for monitoring, detection and to propose adequate treatment technologies. The main objectives of this review study were to assess (i) the occurrences and toxicities, (2) the removal technologies and (3) the transformation pathways and intermediates of ACT in four environmental compartments namely wastewater, surface water, ground water, and soil/sediments. Based on the review, it was observed that the ACT concentrations in wastewater can reach up to several hundreds of ppb. Amongst the different countries, China and the USA showed the highest ACT concentration in wastewater (≤300 µg/L), with a very high detection frequency (81-100%). Concerning surface water, the ACT concentrations were found to be at the ppt level. Some regions in France, Spain, Germany, Korea, USA, and UK comply with the recommended ACT concentration for drinking water (71 ng/L). Notably, ACT can transform and degrade into various metabolites such as aromatic derivatives or organic acids. Some of them (e.g., hydroquinone and benzoquinone) are toxic to human and other life forms. Thus, in water and wastewater treatment plants, tertiary treatment systems such as advanced oxidation, membrane separation, and hybrid processes should be used to remove the toxic metabolites of ACT.

Hospital wastewater treatment by sponge membrane bioreactor coupled with ozonation process.

Herein, a sponge membrane bioreactor (Sponge-MBR) combined with ozonation process was performed to remove the antibiotics which frequently existed in the hospital wastewater. Whilst seven antibiotics i.e., norfloxacin, ciprofloxacin, ofloxacin, sulfamethoxazole, erythromycin, tetracycline and trimethoprim were widely used in medications, this integration was applied for the evaluation of treatment performance under different fluxes. As the results, whilst the antibiotics were eliminated about 45-93%, the tetracycline was completely removed (100%) using Sponge-MBR operated at the flux of 10 LMH. For enhancement of antibiotics removal, the ozonation process was introduced to treat the membrane permeate. Overall efficiencies were 97 ±â€¯2% (trimethoprim), 92 ±â€¯4% (norfloxacin), 90 ±â€¯1% (erythromycin), 88 ±â€¯4% (ofloxacin), 83 ±â€¯7 (ciprofloxacin) and 66 ±â€¯1% (sulfamethoxazole). These results demonstrated Sponge-MBR coupled with ozonation could be a prospective technology for the hospital wastewater treatment.