RESUMO
Cantilever based scanning force sensors, which probe a specific tip-sample interaction through a functional tip coating, are limited by the material performance achievable in the coating process. In case of the wide spread magnetic force microscopy (MFM) technique, the magnetic performance of MFM tips, especially the response to magnetic fields and the coercivity, fall far behind the quality known from permanent magnet films prepared with optimized process conditions on appropriate substrates. We resolve this limitation by starting from an optimized thin film architecture - a highly anisotropic SmCo5 film grown epitaxially on MgO(110) substrates - from which a tip is separated by focused ion beam and is attached to a cantilever. Not compromising on resolution and sensitivity, we demonstrate an unrivaled rigidity in magnetic fields, which will largely advance quantitative microscopic investigation of magnetic materials with strong stray fields and allows MFM measurements in external magnetic fields of currently up to 0.7 T. The material optimization for a specific sample - cantilever interaction without restrictions in substrate, film architecture, film preparation conditions and tip shape, is not limited to MFM but offers new opportunities also for other scanning force microscopy modes.
RESUMO
We present a comprehensive method for visualisation and quantification of the magnetic stray field of magnetic force microscopy (MFM) probes, applied to the particular case of custom-made multi-layered probes with controllable high/low magnetic moment states. The probes consist of two decoupled magnetic layers separated by a non-magnetic interlayer, which results in four stable magnetic states: ±ferromagnetic (FM) and ±antiferromagnetic (A-FM). Direct visualisation of the stray field surrounding the probe apex using electron holography convincingly demonstrates a striking difference in the spatial distribution and strength of the magnetic flux in FM and A-FM states. In situ MFM studies of reference samples are used to determine the probe switching fields and spatial resolution. Furthermore, quantitative values of the probe magnetic moments are obtained by determining their real space tip transfer function (RSTTF). We also map the local Hall voltage in graphene Hall nanosensors induced by the probes in different states. The measured transport properties of nanosensors and RSTTF outcomes are introduced as an input in a numerical model of Hall devices to verify the probe magnetic moments. The modelling results fully match the experimental measurements, outlining an all-inclusive method for the calibration of complex magnetic probes with a controllable low/high magnetic moment.