Principal Components Analysis of Driving Simulator Variables in Novice Drivers.

Objective: Although driving simulators are powerful tools capable of measuring a wide-ranging set of tactical and operational level driving behaviors, comparing these behaviors across studies is problematic because there is no core set of driving variables to report when assessing driving behavior in simulated driving scenarios. To facilitate comparisons across studies, researchers need consistency in how driving simulator variables combine to assess driving behavior. With inter-study consistency, driving simulator research could support stronger conclusions about safe driving behaviors and more reliably identify future driver training goals. The purpose of the current study was to derive empirically and theoretically meaningful composite scores from driving behaviors of young people in a driving simulator, utilizing driving data from across a variety of driving environments and from within the individual driving environments. Method: One hundred ninety adolescent participants aged 16 years or 18 years at enrollment provided demographic data and drove in a high-fidelity driving simulator. The simulated scenario included 4 distinct environments: Urban, Freeway, Residential, and a Car Following Task (CFT). A Principal Components Analysis (PCA) was conducted on the variable output from the driving simulator to select optimal factor solutions and loadings both across the multi-environmental drive and within the four individual driving environments. Results: The PCA suggested two components from the multi-environmental simulated drive: vehicle control and speed. The individual driving environments also indicated two components: vehicle control and tactical judgment. Conclusion: These findings are among the first steps for identifying composite driving simulator variables to quantify theoretical conceptualizations of driving behavior. Currently, driving behavior and performance measured by driving simulators lack "gold standards" via driving scores or benchmarks. The composites derived in this analysis may be studied for further use where driving behavior standards are increasingly sought by clinicians and practitioners for a variety of populations, as well as by parents concerned about the readiness of their novice driving teen.

Case report: CMV retinitis following local and systemic immunosuppression.

We report the case of a 71-year-old man who presented 2 years following renal transplantation with diffuse, unilateral cytomegalovirus retinitis five weeks after receiving an intravitreal dexamethasone implant device for the management of central retinal vein occlusion. Examination of the left eye showed diffuse retinal hemorrhages, attenuated and tortuous retinal vessels, and superior retinal whitening. The patient was successfully treated with serial intravitreal foscarnet injections and oral valganciclovir with disease regression observed by 12 weeks after presentation. The patient's visual acuity and examination remained stable at 9-months follow-up.

Improving the hemocompatibility of a porohyperelastic layered vascular graft using luminal reversal microflows.

Vascular graft thrombosis is a long-standing clinical problem. A myriad of efforts have been devoted to reducing thrombus formation following bypass surgery. Researchers have primarily taken a chemical approach to engineer and modify surfaces, seeking to make them more suitable for blood contacting applications. Using mechanical forces and surface topology to prevent thrombus formation has recently gained more attention. In this study, we have designed a bilayered porous vascular graft capable of repelling platelets and destabilizing absorbed protein layers from the luminal surface. During systole, fluid penetrates through the graft wall and is subsequently ejected from the wall into the luminal space (Luminal Reversal Flow - LRF), pushing platelets away from the surface during diastole. In-vitro hemocompatibility tests were conducted to compare platelet deposition in high LRF grafts with low LRF grafts. Graft material properties were determined and utilized in a porohyperelastic (PHE) finite element model to computationally predict the LRF generation in each graft type. Hemocompatibility testing showed significantly lower platelet deposition values in high versus low LRF generating grafts (median±IQR = 5,708 ± 987 and 23,039 ± 3,310 platelets per mm2, respectively, p=0.032). SEM imaging of the luminal surface of both graft types confirmed the quantitative blood test results. The computational simulations of high and low LRF generating grafts resulted in LRF values of -10.06 µm/s and -2.87 µm/s, respectively. These analyses show that a 250% increase in LRF is associated with a 75.2% decrease in platelet deposition. PHE vascular grafts with high LRF have the potential to improve anti-thrombogenicity and reduce thrombus-related post-procedure complications. Additional research is required to overcome the limitations of current graft fabrication technologies that further enhance LRF generation.

Development of an Injectable, ECM-Derivative Embolic for the Treatment of Cerebral Saccular Aneurysms.

Cerebral aneurysms are a source of neurological morbidity and mortality, most often as a result of rupture. The most common approach for treating aneurysms involves endovascular embolization using nonbiodegradable medical devices, such as platinum coils. However, the need for retreatment due to the recanalization of coil-treated aneurysms highlights the importance of exploring alternative solutions. In this study, we propose an injectable extracellular matrix-derived embolic formed in situ by Michael addition of gelatin-thiol (Gel-SH) and hyaluronic acid vinyl sulfone (HA-VS) that may be delivered with a therapeutic agent (here, RADA-SP) to fill and remodel aneurysmal tissue without leaving behind permanent foreign bodies. The injectable embolic material demonstrated rapid gelation under physiological conditions, forming a highly porous structure and allowing for cellular infiltration. The injectable embolic exhibited thrombogenic behavior in vitro that was comparable to that of alginate injectables. Furthermore, in vivo studies in a murine carotid aneurysm model demonstrated the successful embolization of a saccular aneurysm and extensive cellular infiltration both with and without RADA-SP at 3 weeks, with some evidence of increased vascular or fibrosis markers with RADA-SP incorporation. The results indicate that the developed embolic has inherent potential for acutely filling cerebrovascular aneurysms and encouraging the cellular infiltration that would be necessary for stable, chronic remodeling.

Redefining vascular repair: revealing cellular responses on PEUU-gelatin electrospun vascular grafts for endothelialization and immune responses on in vitro models.

Tissue-engineered vascular grafts (TEVGs) poised for regenerative applications are central to effective vascular repair, with their efficacy being significantly influenced by scaffold architecture and the strategic distribution of bioactive molecules either embedded within the scaffold or elicited from responsive tissues. Despite substantial advancements over recent decades, a thorough understanding of the critical cellular dynamics for clinical success remains to be fully elucidated. Graft failure, often ascribed to thrombogenesis, intimal hyperplasia, or calcification, is predominantly linked to improperly modulated inflammatory reactions. The orchestrated behavior of repopulating cells is crucial for both initial endothelialization and the subsequent differentiation of vascular wall stem cells into functional phenotypes. This necessitates the TEVG to provide an optimal milieu wherein immune cells can promote early angiogenesis and cell recruitment, all while averting persistent inflammation. In this study, we present an innovative TEVG designed to enhance cellular responses by integrating a physicochemical gradient through a multilayered structure utilizing synthetic (poly (ester urethane urea), PEUU) and natural polymers (Gelatin B), thereby modulating inflammatory reactions. The luminal surface is functionalized with a four-arm polyethylene glycol (P4A) to mitigate thrombogenesis, while the incorporation of adhesive peptides (RGD/SV) fosters the adhesion and maturation of functional endothelial cells. The resultant multilayered TEVG, with a diameter of 3.0 cm and a length of 11 cm, exhibits differential porosity along its layers and mechanical properties commensurate with those of native porcine carotid arteries. Analyses indicate high biocompatibility and low thrombogenicity while enabling luminal endothelialization and functional phenotypic behavior, thus limiting inflammation in in-vitro models. The vascular wall demonstrated low immunogenicity with an initial acute inflammatory phase, transitioning towards a pro-regenerative M2 macrophage-predominant phase. These findings underscore the potential of the designed TEVG in inducing favorable immunomodulatory and pro-regenerative environments, thus holding promise for future clinical applications in vascular tissue engineering.

Reach and effectiveness of a non-university cardio-obstetrics program.

BACKGROUND: Current guidelines recommend multidisciplinary cardiovascular obstetric programs (CVOB) to manage complex pregnant patients with cardiovascular disease. Minimal evaluation of these programs exists, with most of these programs offered at university-based centers. METHODS: A cohort of 113 patients managed by a CVOB team at a non-university health system (2018-2019) were compared to 338 patients seen by cardiology prior to the program (2016-2017). CVOB patients were matched with comparison patients (controls) on modified World Health Organization (mWHO) category classification, yielding a cohort of 102 CVOB and 102 controls. RESULTS: CVOB patients were more ethnically diverse and cardiovascular risk was higher compared to controls based on mWHO ≥ II-III (57% vs 17%) and. After matching, CVOB patients had more cardiology tests during pregnancy (median of 8 tests vs 5, p < .001) and were more likely to receive telemetry care (32% vs 19%, p = .025). The median number of perinatology visits was significantly higher in the CVOB group (8 vs 2, p < .001). Length of stay was a half day longer for vaginal delivery patients in the CVOB group (median 2.66 vs 2.13, p = .006). CONCLUSION: Implementation of a CVOB program resulted in a more diverse patient population than previously referred to cardiology. The CVOB program participants also experienced a higher level of care in terms of increased cardiovascular testing, monitoring, care from specialists, and appropriate use of medications during pregnancy.

Shape-recovery of implanted shape-memory devices remotely triggered via image-guided ultrasound heating.

Shape-memory materials hold great potential to impart medical devices with functionalities useful during implantation, locomotion, drug delivery, and removal. However, their clinical translation is limited by a lack of non-invasive and precise methods to trigger and control the shape recovery, especially for devices implanted in deep tissues. In this study, the application of image-guided high-intensity focused ultrasound (HIFU) heating is tested. Magnetic resonance-guided HIFU triggered shape-recovery of a device made of polyurethane urea while monitoring its temperature by magnetic resonance thermometry. Deformation of the polyurethane urea in a live canine bladder (5 cm deep) is achieved with 8 seconds of ultrasound-guided HIFU with millimeter resolution energy focus. Tissue sections show no hyperthermic tissue injury. A conceptual application in ureteral stent shape-recovery reduces removal resistance. In conclusion, image-guided HIFU demonstrates deep energy penetration, safety and speed.

Open-Source Image-Based Tool to Experimentally Evaluate Blood Residence Time in Clinical Devices.

This article introduces an open-source tool to experimentally compare blood residence time in biomedical devices using an image-based method. The experimental setup and the postprocessing workflow are comprehensively elucidated in a detailed report that conducts a thorough comparison of the residence times of a blood analog within three distinct blood oxygenator prototypes. To enable widespread accessibility and ease of use, the user-friendly MATLAB App developed for the analysis is available on the Mathworks repository: https://www.mathworks.com/matlabcentral/fileexchange/135156 .

Nerve Wrap for Local Delivery of FK506/Tacrolimus Accelerates Nerve Regeneration.

Peripheral nerve injuries (PNIs) occur frequently and can lead to devastating and permanent sensory and motor function disabilities. Systemic tacrolimus (FK506) administration has been shown to hasten recovery and improve functional outcomes after PNI repair. Unfortunately, high systemic levels of FK506 can result in adverse side effects. The localized administration of FK506 could provide the neuroregenerative benefits of FK506 while avoiding systemic, off-target side effects. This study investigates the utility of a novel FK506-impregnated polyester urethane urea (PEUU) nerve wrap to treat PNI in a previously validated rat infraorbital nerve (ION) transection and repair model. ION function was assessed by microelectrode recordings of trigeminal ganglion cells responding to controlled vibrissae deflections in ION-transected and -repaired animals, with and without the nerve wrap. Peristimulus time histograms (PSTHs) having 1 ms bins were constructed from spike times of individual single units. Responses to stimulus onsets (ON responses) were calculated during a 20 ms period beginning 1 ms after deflection onset; this epoch captures the initial, transient phase of the whisker-evoked response. Compared to no-wrap controls, rats with PEUU-FK506 wraps functionally recovered earlier, displaying larger response magnitudes. With nerve wrap treatment, FK506 blood levels up to six weeks were measured nearly at the limit of quantification (LOQ ≥ 2.0 ng/mL); whereas the drug concentrations within the ION and muscle were much higher, demonstrating the local delivery of FK506 to treat PNI. An immunohistological assessment of ION showed increased myelin expression for animals assigned to neurorrhaphy with PEUU-FK506 treatment compared to untreated or systemic-FK506-treated animals, suggesting that improved PNI outcomes using PEUU-FK506 is mediated by the modulation of Schwann cell activity.

Influence of Polymer Stiffness and Geometric Design on Fluid Mechanics in Tissue-Engineered Pulmonary Valve Scaffolds.

There is still much unknown about the fluid mechanical response to cardiac valve scaffolds, even as their implementation in the clinic is on the horizon. Specifically, while degradable polymer valve scaffolds are currently being tested in the pulmonary valve position, their material and mechanical properties have not been fully elucidated. Optimizing these properties are important determinants not only of acute function, but long-term remodeling prospects. This study aimed to characterize fluid profiles downstream of electrospun valve scaffolds under dynamic pulmonary conditions. Valve scaffold design was changed by either blending poly(carbonate urethane) urea (PCUU) with poly(ε-caprolactone) (PCL) to modulate material stiffness or by changing the geometric design of the valve scaffolds. Specifically, two designs were utilized: one modeled after a clinically used bioprosthetic valve design (termed Mk1 design), and another using a geometrically "optimized" design (termed Mk2) based on anatomical data. Particle image velocimetry results showed that material stiffness only had a mild impact on fluid mechanics, measured by velocity magnitude, vorticity, viscous shear stress, Reynolds shear stress, and turbulent kinetic energy. However, comparing the two geometric designs yielded a much greater impact, with the Mk2 valve groups containing the highest PCUU/PCL ratio demonstrating the overall best performance. This report highlights the easily manipulable design features of polymeric valve scaffolds and demonstrates their relative significance for valve function.

Tissue formation and host remodeling of an elastomeric biodegradable scaffold in an ovine pulmonary leaflet replacement model.

In pursuit of a suitable scaffold material for cardiac valve tissue engineering applications, an acellular, electrospun, biodegradable polyester carbonate urethane urea (PECUU) scaffold was evaluated as a pulmonary valve leaflet replacement in vivo. In sheep (n = 8), a single pulmonary valve leaflet was replaced with a PECUU leaflet and followed for 1, 6, and 12 weeks. Implanted leaflet function was assessed in vivo by echocardiography. Explanted samples were studied for gross pathology, microscopic changes in the extracellular matrix, host cellular re-population, and immune responses, and for biomechanical properties. PECUU leaflets showed normal leaflet motion at implant, but decreased leaflet motion and dimensions at 6 weeks. The leaflets accumulated α-SMA and CD45 positive cells, with surfaces covered with endothelial cells (CD31+). New collagen formation occurred (Picrosirius Red). Accumulated tissue thickness correlated with the decrease in leaflet motion. The PECUU scaffolds had histologic evidence of scaffold degradation and an accumulation of pro-inflammatory/M1 and anti-inflammatory/M2 macrophages over time in vivo. The extent of inflammatory cell accumulation correlated with tissue formation and polymer degradation but was also associated with leaflet thickening and decreased leaflet motion. Future studies should explore pre-implant seeding of polymer scaffolds, more advanced polymer fabrication methods able to more closely approximate native tissue structure and function, and other techniques to control and balance the degradation of biomaterials and new tissue formation by modulation of the host immune response.

Epoxy silane sulfobetaine block copolymers for simple, aqueous thromboresistant coating on ambulatory assist lung devices.

Developing an ambulatory assist lung (AAL) for patients who need continuous extracorporeal membrane oxygenation has been associated with several design objectives, including the design of compact components, optimization of gas transfer efficiency, and reduced thrombogenicity. In an effort to address thrombogenicity concerns with currently utilized component biomaterials, a low molecular weight water soluble siloxane-functionalized zwitterionic sulfobetaine (SB-Si) block copolymer was coated on a full-scale AAL device set via a one pot aqueous circulation coating. All device parts including hollow fiber bundle, housing, tubing and cannular were successfully coated with increasing atomic compositions of the SB block copolymer and the coated surfaces showed a significant reduction of platelet deposition while gas exchange performance was sustained. However, water solubility of the SB-Si was unstable, and the coating method, including oxygen plasma pretreatment on the surfaces were considered inconsistent with the objective of developing a simple aqueous coating. Addressing these weaknesses, SB block copolymers were synthesized bearing epoxy or epoxy-silane groups with improved water solubility (SB-EP & SB-EP-Si) and no requirement for surface pretreatment (SB-EP-Si). An SB-EP-Si triblock copolymer showed the most robust coating capacity and stability without prior pretreatment to represent a simple aqueous circulation coating on an assembled full-scale AAL device.

Electrical stimulation via repeated biphasic conducting materials for peripheral nerve regeneration.

Improved materials for peripheral nerve repair are needed for the advancement of new surgical techniques in fields spanning from oncology to trauma. In this study, we developed bioresorbable materials capable of producing repeated electric field gradients spaced 600 µm apart to assess the impact on neuronal cell growth, and migration. Electrically conductive, biphasic composites comprised of poly (glycerol) sebacate acrylate (PGSA) alone, and doped with poly (pyrrole) (PPy), were prepared to create alternating segments with high and low electrically conductivity. Conductivity measurements demonstrated that 0.05% PPy added to PSA achieved an optimal value of 1.25 × 10-4 S/cm, for subsequent electrical stimulation. Tensile testing and degradation of PPy doped and undoped PGSA determined that 35-40% acrylation of PGSA matched nerve mechanical properties. Both fibroblast and neuronal cells thrived when cultured upon the composite. Biphasic PGSA/PPy sheets seeded with neuronal cells stimulated for with 3 V, 20 Hz demonstrated a 5x cell increase with 1 day of stimulation and up to a 10x cell increase with 3 days stimulation compared to non-stimulated composites. Tubular conduits composed of repeated high and low conductivity materials suitable for implantation in the rat sciatic nerve model for nerve repair were evaluated in vivo and were superior to silicone conduits. These results suggest that biphasic conducting conduits capable of maintaining mechanical properties without inducing compression injuries while generating repeated electric fields are a promising tool for acceleration of peripheral nerve repair to previously untreatable patients.

Polyester urethane urea (PEUU) functionalization for enhanced anti-thrombotic performance: advancing regenerative cardiovascular devices through innovative surface modifications.

Introduction: Thrombogenesis, a major cause of implantable cardiovascular device failure, can be addressed through the use of biodegradable polymers modified with anticoagulating moieties. This study introduces a novel polyester urethane urea (PEUU) functionalized with various anti-platelet deposition molecules for enhanced antiplatelet performance in regenerative cardiovascular devices. Methods: PEUU, synthesized from poly-caprolactone, 1,4-diisocyanatobutane, and putrescine, was chemically oxidized to introduce carboxyl groups, creating PEUU-COOH. This polymer was functionalized in situ with polyethyleneimine, 4-arm polyethylene glycol, seleno-L-cystine, heparin sodium, and fondaparinux. Functionalization was confirmed using Fourier-transformed infrared spectroscopy and X-ray photoelectron spectroscopy. Bio-compatibility and hemocompatibility were validated through metabolic activity and hemolysis assays. The anti-thrombotic activity was assessed using platelet aggregation, lactate dehydrogenase activation assays, and scanning electron microscopy surface imaging. The whole-blood clotting time quantification assay was employed to evaluate anticoagulation properties. Results: Results demonstrated high biocompatibility and hemocompatibility, with the most potent anti-thrombotic activity observed on pegylated surfaces. However, seleno-L-cystine and fondaparinux exhibited no anti-platelet activity. Discussion: The findings highlight the importance of balancing various factors and addressing challenges associated with different approaches when developing innovative surface modifications for cardiovascular devices.

Pregnancy outcomes in women with Ebstein's anomaly: data from the Registry of Pregnancy And Cardiac disease (ROPAC).

OBJECTIVE: Ebstein's anomaly is a rare congenital cardiac condition and data regarding pregnancy outcomes in this patient group are scarce. We evaluated the maternal and perinatal risks of pregnancy in 81 women with Ebstein's anomaly. METHODS: The Registry of Pregnancy and Cardiac disease is a prospective global registry of pregnancies in women with structural cardiac disease. Pregnancy outcomes in women with Ebstein's anomaly were examined. The primary outcome was the occurrence of a major adverse cardiac event (MACE) defined as maternal mortality, heart failure, arrhythmia, thromboembolic event or endocarditis. Secondary endpoints were obstetric and perinatal outcomes and the influence of pregnancy on tricuspid valve regurgitation as well as right atrial and ventricular dimensions. RESULTS: In the 81 women with Ebstein's anomaly (mean age 29.7±6.1 years, 46.9% nulliparous), MACE occurred in 8 (9.9%) pregnancies, mostly heart failure (n=6). There were no maternal deaths. Prepregnancy signs of heart failure were predictive for MACE. Almost half of the women were delivered by caesarean section (45.7%) and preterm delivery occurred in 24.7%. Neonatal mortality was 2.5% and 4.9% of the infants had congenital heart disease. In the subgroup in which prepregnancy and postpregnancy data were available, there was no difference in tricuspid valve regurgitation grade or right atrial and ventricular dimensions before and after pregnancy. CONCLUSIONS: Most women with Ebstein's anomaly tolerate pregnancy well, but women with prepregnancy signs of heart failure are at higher risk for MACE during pregnancy and should be counselled accordingly.

Cardiac valve scaffold design: Implications of material properties and geometric configuration on performance and mechanics.

Development of tissue engineered scaffolds for cardiac valve replacement is nearing clinical translation. While much work has been done to characterize mechanical behavior of native and bioprosthetic valves, and incorporate those data into models improving valve design, similar work for degradable valve scaffolds is lacking. This is particularly important given the implications mechanics have on short-term survival and long-term remodeling. As such, this study aimed to characterize spatially-resolved strain profiles on the leaflets of degradable polymeric valve scaffolds, manipulating common design features such as material stiffness by blending poly(carbonate urethane)urea with stiffer polymers, and geometric configuration, modeled after either a clinically-used valve design (Mk1 design) or an anatomically "optimized" design (Mk2 design). It was shown that material stiffness plays a significant role in overall valve performance, with the stiffest valve groups showing asymmetric and incomplete opening during systole. However, the geometric configuration had a significantly greater effect on valve performance as well as strain magnitude and distribution. Major findings in the strain maps included systolic strains having overall higher strain magnitudes than diastole, and peak radial-direction strain concentrations in the base region of Mk1 valves during systole, with a significant mitigation of radial strain in Mk2 valves. The high tunability of tissue engineered scaffolds is a great advantage for valve design, and the results reported here indicate that design parameters have significant and unequal impact on valve performance and mechanics.

Creating and Transferring an Innervated, Vascularized Muscle Flap Made from an Elastic, Cellularized Tissue Construct Developed In Situ.

Reanimating facial structures following paralysis and muscle loss is a surgical objective that would benefit from improved options for harvesting appropriately sized muscle flaps. The objective of this study is to apply electrohydrodynamic processing to generate a cellularized, elastic, biocomposite scaffold that could develop and mature as muscle in a prepared donor site in vivo, and then be transferred as a thin muscle flap with a vascular and neural pedicle. First, an effective extracellular matrix (ECM) gel type is selected for the biocomposite scaffold from three types of ECM combined with poly(ester urethane)urea microfibers and evaluated in rat abdominal wall defects. Next, two types of precursor cells (muscle-derived and adipose-derived) are compared in constructs placed in rat hind limb defects for muscle regeneration capacity. Finally, with a construct made from dermal ECM and muscle-derived stem cells, protoflaps are implanted in one hindlimb for development and then microsurgically transferred as a free flap to the contralateral limb where stimulated muscle function is confirmed. This construct generation and in vivo incubation procedure may allow the generation of small-scale muscle flaps appropriate for transfer to the face, offering a new strategy for facial reanimation.

Syndecan-4 Functionalization Reduces the Thrombogenicity of Engineered Vascular Biomaterials.

Blood-biomaterial compatibility is essential for tissue repair especially for endovascular biomaterials where small-diameter vessel patency and endothelium formation is crucial. To address this issue, a composite biomaterial termed PFC fabricated from poly (glycerol sebacate), silk fibroin, and collagen was used to determine if functionalization with syndecan-4 (SYN4) would reduce thrombogenesis through the action of heparan sulfate. The material termed, PFC_SYN4, has structure and composition similar to native arterial tissue and has been reported to facilitate the binding and differentiation of endothelial colony-forming cells (ECFCs). In this study, the hemocompatibility of PFC_SYN4 was evaluated and compared with non-functionalized PFC, electrospun collagen, ePTFE, and bovine pericardial patch (BPV). Ultrastructurally, platelets were less activated when cultured on PFC and PFC_SYN4 compared to collagen where extensive platelet degranulation was observed. Quantitatively, 31% and 44% fewer platelets adhered to PFC_SYN4 compared to non-functionalized PFC and collagen, respectively. Functionalization of PFC resulted in reduced levels of complement activation compared to PFC, collagen, and BPV. Whole blood clotting times indicated that PFC_SYN4 was less thrombogenic compared with PFC, collagen, and BPV. These results suggest that syndecan-4 functionalization of blood-contacting biomaterials provides a novel solution for generating a reduced thrombogenic surface.

The Year 2022 in biomaterials research: A perspective from the editors of six leading journals.

The field of biomaterials science is highly active, with a steadily increasing number of publications and new journals being founded. This article brings together contributions from the editors of six leading journals in the area of biomaterials science and engineering. Each contributor highlights specific advances, topics, and trends that have emerged through the publications in their respective journal in the calendar year 2022. It presents a global perspective on a wide range of material types, functionalities, and applications. The highlighted topics include a diversity of biomaterials; from proteins, polysaccharides, and lipids to ceramics, metals, advanced composites, and a variety of new forms of these materials. Important advances in dynamically functional materials are presented, including a range of fabrication techniques such as bioassembly, 3D bioprinting and microgel formation. Similarly, several applications are highlighted in drug and gene delivery, biological sensing, cell guidance, immunoengineering, electroconductivity, wound healing, infection resistance, tissue engineering, and treatment of cancer. The goal of this paper is to provide the reader with both a broad view of recent biomaterials research, as well as expert commentary on some of the key advances that will shape the future of biomaterials science and engineering.

Optimizing the Porohyperelastic Response of a Layered Compliance Matched Vascular Graft to Promote Luminal Self-Cleaning.

Thrombosis and intimal hyperplasia have remained the major failure mechanisms of small-diameter vascular grafts used in bypass procedures. While most efforts to reduce thrombogenicity have used a biochemical surface modification approach, the use of local mechanical phenomena to aid in this goal has received somewhat less attention. In this work, the mechanical, fluid transport, and geometrical properties of a layered and porous vascular graft are optimized within a porohyperelastic finite element framework to maximize self-cleaning via luminal reversal fluid velocity (into the lumen). This is expected to repel platelets as well as inhibit the formation of and/or destabilize adsorbed protein layers thereby reducing thrombogenic potential. A particle swarm optimization algorithm was utilized to maximize luminal reversal fluid velocity while also compliance matching our graft to a target artery (rat aorta). The maximum achievable luminal reversal fluid velocity was approximately 246 µm/s without simultaneously optimizing for host compliance. Simultaneous optimization of reversal flow and compliance resulted in a luminal reversal fluid velocity of 59 µm/s. Results indicate that a thick highly permeable compressible inner layer and a thin low permeability incompressible outer layer promote intraluminal reversal fluid velocity. Future research is needed to determine the feasibility of fabricating such a layered and optimized graft and verify its ability to improve hemocompatibility.