Flexible Equivalent Strain Sensor with Ordered Concentric Circular Curved Cracks Inspired by Scorpion.

Slit sensillum, a unique sensing organ on the scorpion's legs, is composed of several cracks with curved shapes. In fact, it is just its particular morphological distribution and structure that endows the scorpions with ultrasensitive sensing capacity. Here, a scorpion-inspired flexible strain sensor with an ordered concentric circular curved crack array (CCA) was designed and fabricated by using an optimized solvent-induced and template transfer combined method. The morphology of the cracks can be effectively controlled by the heating temperature and the lasting time. Instead of the nonuniform stress distribution induced by disordered cracks, ordered concentric circle curved structures are introduced to generate a uniform stress distribution and larger deformation, which can significantly improve the performance of the strain sensor. Thus, the CCA sensor exhibits ultrahigh sensitivity (GF ∼ 7878.6), excellent stability (over 16 000 cycles), and fast response time (110 ms). Furthermore, the CCA sensor was demonstrated to be feasible for monitoring human motions and detecting noncontact vibration signals, indicating its great potential in human-health monitoring and vibration signal detection applications.

Ultrasensitive, Highly Stable, and Flexible Strain Sensor Inspired by Nature.

For advanced flexible strain sensors, it is not difficult to achieve high sensitivity only. However, integrating high sensitivity, high stability, and high durability into one sensor still remains a great challenge. Fortunately, natural creatures with diversified excellent performances have given us a lot of ready-made solutions. Here, scorpion and spiderweb are selected as coupling bionic prototypes, which are famous for their ultrasensitive sensing capacity and excellent structural durability, respectively. Based on that, a bioinspired strain sensor is successfully fabricated. The results demonstrate that the bioinspired strain sensor has a sensitivity of 940.5 in the strain range of 0-1.5% and a sensitivity of 2742.3 between 1.5 and 2.5%. Meantime, this sensor with a spiderweb-like reticular structure has a great improvement in stability and durability. Specifically, the sensor exhibits excellent stability during bending and stretching cycles over 80,000 times. Moreover, the response time and recovery time of the sensor are 169 and 195 ms, respectively. Besides, the sensor also has functions such as vibrating frequency identification due to its low hysteresis. Based on the excellent performance, the sensor can be applied to monitor human body motions serving as wearable electronics.

A Selective-Response Bioinspired Strain Sensor Using Viscoelastic Material as Middle Layer.

Flexible strain sensors have an irreplaceable role in critical and emerging fields, such as electronic skins, flexible robots, and prosthetics. Although numerous efforts have been made to improve sensor sensitivity to meet specific application scenarios, the signal-to-noise ratio (SNR) is an extremely critical and non-negligible indicator, which takes into account higher sensitivity, meaning that they can also detect the noise signals with high sensitivity. Coincidentally, scorpions with ultrasensitive vibration sensilla also face such a dilemma. Here, it is found that the scorpion ingeniously uses the viscoelastic material in front of its slit sensilla to realize efficient preprocessing of the signal. Its mechanism is that the loss factor of materials changes with frequency, affecting energy storage and transmission. Inspired by this ingenious strategy, a bioinspired strain sensor insensitive to a low strain rate was designed using a two-step template transfer method. As a result, its relative change in resistance reached 110% under the same strain (0.3197%) but with different strain rates (0.1 Hz and ∼20 Hz). The noncontact vibration experiments also show different responses to low-frequency vibration and high-frequency impact. Moreover, it can also be used as a typical flexible strain sensor. Under the tensile state, it has a gauge factor (GF) as high as 4596 upon 0.6% strain, and the response time is 140 ms. Therefore, it is expected that this strain sensor will be used in many important ultraprecision measurement fields, especially when the measured signal is small.