Why does distilled liquor (Baijiu) have a yellowish color: A comprehensive analysis.

Elucidating the mechanisms underlying Baijiu production is a shared aspiration among academic groups specializing in the field of Baijiu research. This study comprehensively examined the mechanisms underlying the yellowish coloration of Baijiu through a synergistic application of chromatographic, spectroscopic, and physical methodologies. Aging of Baijiu in earthenware pots involves the infiltration of mineral ions such as iron, aluminum, and calcium; however, these ions are detected at extremely low concentrations and are therefore not linked to the development of Baijiu's yellowish color. Instead, the yellowish coloration is attributed to the diverse colorants generated during the high-temperature fermentation of small-molecule sugars derived from the saccharification of grain materials. Although these colorants exist in minimal quantities and exhibit spectral absorption peaks ranging from 300 to 450 nm, their overlapping spectra collectively contribute to the light-absorbing properties of Baijiu across a broad wavelength range, ultimately accounting for its characteristic yellowish color.

B10 cells regulate macrophage polarization to alleviate inflammation and bone loss in periodontitis.

BACKGROUND: The polarization of macrophages into an anti-inflammatory phenotype is crucial for resolving periodontal inflammation. It has been reported that B10 cells can regulate the immune response of macrophages during inflammation and are also able to regulate inflammation in periodontitis. However, whether B10 cells' regulation function in periodontitis is related to macrophage polarization remains unclear. This study aims to investigate whether B10 cells can regulate macrophage polarization in periodontitis. METHODS: Macrophages were cocultured with B10 cells in vitro for 5 days. After coculture, macrophages were obtained for analysis directly or followed by stimulation with Pg-LPS/IFN-γ or IL-4/IL-13. Flow cytometry and/or reverse transcriptase-polymerase chain reaction (RT-PCR) were employed to detect the expression of IL-1ß, iNOS, TNF-α, CD206, and ARG-1 in macrophages. B10 cells were transferred on the 5th day after ligation in wild or macrophage-depletion mice. Toluidine blue and TRAP staining were used to evaluate alveolar bone resorption and osteoclast activation. Immunohistochemistry was employed to detect the expression of CD68, IL-1ß, TNF-α, iNOS, ARG-1, and IL-10. Immunofluorescence was used to detect the expression of CD68+CD86+M1 macrophages and CD68+CD206+M2 macrophages. RESULTS: In vitro, B10 cells inhibit the expression of IL-1ß, iNOS, and TNF-α in macrophages while increasing the expression of CD206 and ARG-1. In experimental periodontitis, B10 cells inhibit the polarization of CD68+CD86+M1 macrophages and iNOS expression but enhance the polarization of CD68+CD206+M2 macrophages and ARG-1 expression. Importantly, the depletion of macrophages partially weakened the regulation function of B10 cells in periodontitis. CONCLUSIONS: B10 cells promote M2 macrophage polarization, inhibit M1 macrophage polarization in periodontitis, and alleviate periodontitis partially by regulating macrophage polarization.

Dual-nodes bridged cobalt-modified Keggin-type polyoxometalate-based chains for highly efficient CO2 photoconversion.

The design of efficient catalysts for photocatalytic CO2 conversion is of great importance for the sustainable development of society. Herein, three polyoxometalate (POM)-based crystalline materials were formulated prepared by substituting transition metals and adjusting solvent acidity with 2-(2-pyridyl) benzimidazole (pyim) as the light-trapping ligand, namely {[SiW12O40][Co(pyim)2]2}·2C2H5OH (SiW12Co2), {[SiW12O40][Ni(pyim)2]2}·2C2H5OH (SiW12Ni2), and {[SiW12O40][Mn(pyim)2]2}·2C2H5OH (SiW12Mn2). X-ray crystallography diffraction analysis indicates that the three complexes exhibit isostructural properties, and form a stable one-dimensional chain structure stabilized by two [M(pyim)2]22+ (M = Co, Ni, and Mn) fragments serving as dual-nodes to the adjacent SiW12 units. A comprehensive analysis of the structural characterization and photocatalytic CO2 reduction properties is presented. Under light irradiation, SiW12Co2 exhibited a remarkable CO generation rate of 10 733 µmol g-1 h-1 with a turnover number of 328, outperforming most of the reported heterogeneous POM-based photocatalysts. Besides, cycling tests revealed that SiW12Co2 is an efficient and stable photocatalyst with great recyclability for at least four successive runs. This study proves that the successful incorporation of diverse transition metals into the POM anion could facilitate the development of highly efficient photocatalysts for the CO2RR.

An iron-containing POM-based hybrid compound as a heterogeneous catalyst for one-step hydroxylation of benzene to phenol.

It is a major challenge to perform one-pot hydroxylation of benzene to phenol under mild conditions, which replaces the environmentally harmful cumene method. Thus, finding highly efficient heterogeneous catalysts that can be recycled is extremely significant. Herein, a (POM)-based hybrid compound {[FeII(pyim)2(C2H5O)][FeII(pyim)2(H2O)][PMoV2MoVI9VIV3O42]}·H2O (pyim = 2-(2-pyridyl)benzimidazole) (Fe2-PMo11V3) was successfully prepared by hydrothermal synthesis using typical Keggin POMs, iron ions and pyim ligands. Single-crystal diffraction shows that the Fe-pyim unit in Fe2-PMo11V3 forms a stable double-supported skeleton by Fe-O bonding to the polyacid anion. Remarkably, due to the introduction of vanadium, Fe2-PMo11V3 forms a divanadium-capped conformation. Benzene oxidation experiments indicated that Fe2-PMo11V3 can catalyze the benzene hydroxylation reaction to phenol in a mixed solution of acetonitrile and acetic acid containing H2O2 at 60 °C, affording a phenol yield of about 16.2% and a selectivity of about 94%.

Self-Assembly of Lanthanide-Aluminum Cluster-Organic Frameworks with Magnetocaloric Effect and Luminescence.

The self-assembly of the lanthanide metal-organic frameworks presents a formidable challenge but profound significance. Compared with the metal-organic frameworks based on 4f-3d ions, the chemistry of 4f-3p metal-organic frameworks has not been fully explored so far. In this study, two lanthanide-aluminum-based clusters [Ln6Al(IN)10(µ3-OH)5(µ3-O)3(H2O)8]·xH2O (x = 2, Ln = Gd, abbreviated as Gd6Al; x = 2.5, Ln = Eu, abbreviated as Eu6Al; HIN = isonicotinic acid) have been meticulously designed and obtained by hydrothermal reaction at low pH. The crystallographic study revealed that both Gd6Al and Eu6Al clusters exhibit an unprecedented sandwiched metal-organic framework holding a highly ordered honeycomb network. To our knowledge, it is the first case of Ln-Al-based cluster-organic frameworks. Furthermore, magnetic investigation of Gd6Al manifests a decent magnetic entropy change of -ΔSmmax = 28.8 J kg-1 K-1 at 2 K for ΔH = 7.0 T. Significantly, the introduction of AlIII ions into the lanthanide metal-organic frameworks displays excellent solid-state luminescent capability with a lifetime of 371.6 µs and quantum yield of 6.64%. The construction and investigation of these two Ln-Al clusters represent great progress in the 4f-3p metal-organic framework.

Constructing Two Cu-Modified Organophosphomolybdates from a Nanocluster to a One-Dimensional Chain for Boosted Visible-Light-Driven Hydrogen Production.

Photocatalytic decomposition of water to produce hydrogen H2 is an ideal way to solve energy and environmental problems, and the development of highly efficient polyoxometalate catalysts for photocatalytic hydrogen production has attracted wide attention. Herein, two Cu-modified Strandberg-type organophosphomolybdates were successfully synthesized, [Cu(C8H7N3)(H2O)2]2[(C6H5PO3)2Mo5O15]·4H2O (1) and [Cu(phen)(H2O)][Cu(phen)(H2O)2][(C6H5PO3)2Mo5O15]·2H2O (2) ([(C6H5P)2Mo5O21]Cu2) (C8H7N3 = 2-(1H-pyrazol-3-yl)pyridine, phen = 1,10-phenanthroline). Two Strandberg-type organophosphomolybdates can be used for visible-light-driven hydrogen production. Also, compound 2 exhibits an H2 production rate of 6399 µmol g-1 h-1 after 8 h light exposure in the presence of photosensitization agent [Ir(dtbbpy)(ppy)2][PF6] and TEOA. In addition, cyclic tests showed that compound 2 could be recycled four times without a significant reduction in catalytic performance. This work offers fresh insight into the development of novel polyoxometalates for efficient hydrogen evolution.

Application of interface treatment at different positionp-nc-Si:H hole collector of silicon heterojunction cells.

The hole collector in silicon heterojunction cells serves not only as an integral component of thep/njunction, determining the strength of the built-in electric field, but also as a layer responsible for hole transport, thereby affecting carrier transport capacity. To enhance carrier extraction and transport properties of the hole collector, various interface treatments have been employed onp-type nanocrystalline (p-nc-Si:H) hole collectors. Through an examination of characteristics such as dark conductivity, crystallinity, and contact resistance, the impact of interface treatment onp-nc-Si:H hole collectors is clarified. Furthermore, considering distinct requirements for the hole collector at different locations, interface treatment processes are optimized accordingly. The introduction of interface treatment onp-nc-Si:H hole collectors has demonstrated significant enhancement of both front and rear junction cell efficiencies, which increased from 17.74% to 21.61% and from 16.83% to 20.92%, respectively.

A flexible optoacoustic blood 'stethoscope' for noninvasive multiparametric cardiovascular monitoring.

Quantitative and multiparametric blood analysis is of great clinical importance in cardiovascular disease diagnosis. Although there are various methods to extract blood information, they often require invasive procedures, lack continuity, involve bulky instruments, or have complicated testing procedures. Flexible sensors can realize on-skin assessment of several vital signals, but generally exhibit limited function to monitor blood characteristics. Here, we report a flexible optoacoustic blood 'stethoscope' for noninvasive, multiparametric, and continuous cardiovascular monitoring, without requiring complicated procedures. The optoacoustic blood 'stethoscope' features the light delivery elements to illuminate blood and the piezoelectric acoustic elements to capture light-induced acoustic waves. We show that the optoacoustic blood 'stethoscope' can adhere to the skin for continuous and non-invasive in-situ monitoring of multiple cardiovascular biomarkers, including hypoxia, intravascular exogenous agent concentration decay, and hemodynamics, which can be further visualized with a tailored 3D algorithm. Demonstrations on both in-vivo animal trials and human subjects highlight the optoacoustic blood 'stethoscope''s potential for cardiovascular disease diagnosis and prediction.

Impaired angiogenesis in ageing: the central role of the extracellular matrix.

Each step in angiogenesis is regulated by the extracellular matrix (ECM). Accumulating evidence indicates that ageing-related changes in the ECM driven by cellular senescence lead to a reduction in neovascularisation, reduced microvascular density, and an increased risk of tissue ischaemic injury. These changes can lead to health events that have major negative impacts on quality of life and place a significant financial burden on the healthcare system. Elucidating interactions between the ECM and cells during angiogenesis in the context of ageing is neceary to clarify the mechanisms underlying reduced angiogenesis in older adults. In this review, we summarize ageing-related changes in the composition, structure, and function of the ECM and their relevance for angiogenesis. Then, we explore in detail the mechanisms of interaction between the aged ECM and cells during impaired angiogenesis in the older population for the first time, discussing diseases caused by restricted angiogenesis. We also outline several novel pro-angiogenic therapeutic strategies targeting the ECM that can provide new insights into the choice of appropriate treatments for a variety of age-related diseases. Based on the knowledge gathered from recent reports and journal articles, we provide a better understanding of the mechanisms underlying impaired angiogenesis with age and contribute to the development of effective treatments that will enhance quality of life.

MoO42--templated Ln20Ni21 heterometallic clusters with large low-field magnetic entropy.

The anionic template method is an effective strategy for synthesizing high-nuclearity transition-lanthanide (3d-4f) heterometallic clusters. Herein, two lanthanide clusters with formulas [Gd20Ni21(µ3-OH)21(CO3)6(IDA)21(C2H4NO2)6(C2O4)3(MoO4)1.5(µ2-OH)1.5(H2O)9]Cl10.5·79H2O (1) and [Tb20Ni21(µ3-OH)21(CO3)6(IDA)21(C2H4NO2)6(C2O4)3(MoO4)(µ2-OH)2(H2O)10]Cl11·32H2O (2) were synthesized by introducing MoO42- anions as templates. Structural analysis indicates that compounds 1 and 2 are isomorphic, featuring a fascinating triangular-shaped metal framework. Magnetic property investigations illuminate the fact that compound 1 exhibits a large -ΔSm of 37.83 J kg-1 K-1 at 3 K for ΔH = 7 T. In particular, it is worth mentioning that compound 1 has an excellent low-field magnetic entropy (-ΔSm = 23.85 J kg-1 K-1 at 2 K, 2 T).

Two bimetal-doped (Fe/Co, Mn) polyoxometalate-based hybrid compounds for visible-light-driven CO2 reduction.

Two polyoxometalate (POM)-based hybrid compounds have been successfully designed and constructed by the hydrothermal method with molecular formulas [K(H2O)2FeII0.33Co0.67(H2O)2(DAPSC)]2{[FeII0.33Co0.67(H2O)(DAPSC)]2[FeII0.33Co0.67(H2O)4]2[Na2FeIII4P4W32O120]}·21.5H2O (1), and [Na(H2O)2FeII0.33Mn0.67(H2O)2(DAPSC)]2{[FeII0.33Mn0.67(H2O)(DAPSC)]2[FeII0.33Mn0.67(H2O)4]2[Na2FeIII4P4W32O120(H2O)2]}·24H2O (2) (DAPSC = 2,6-diacetylpyridine bis-(semicarbazone)), respectively. Structural analysis revealed that 1 and 2 consisted of metal-organic complexes containing DAPSC ligands with dumbbell-type inorganic clusters, iron-cobalt (iron-manganese) and some other ions. By utilizing a combination of strongly reducing {P2W12} units and bimetal-doped centres the CO2 photoreduction catalytic capacity of 1 and 2 was improved. Notably, the photocatalytic performance of 1 was much better than that of 2. In CO2 photoreduction, 1 exhibited CO selectivity as high as 90.8%. Furthermore, for 1, the CO generation rate reached 6885.1 µmol g-1 h-1 at 8 h with 3 mg, and its better photocatalytic performance was presumably due to the introduction of cobalt and iron elements to give 1 a more appropriate energy band structure. Further recycling experiments indicated that 1 was a highly efficient CO2 photoreduction catalyst, which could still possess catalytic activity after several cycles.

Layered Co-O Cluster Applied to Photocatalytic CO2 Reduction.

In the field of recycling CO2, the photocatalytic CO2 reduction reaction (CO2RR) is a typical example, and researchers have designed a variety of photocatalysts to improve the conversion rate of CO2 over the years. In this paper, two metal-oxygen clusters are designed and formulated as [Co3Zn(OH)6(SO4)]·4H2O (1) and [Ni3Zn(OH)6(SO4)]·4H2O (2). As for compound 1, the main structure is composed of {CoO6} octahedra connected by edge-sharing to form a two-dimensional layer, on which {ZnO4} and {SO4} tetrahedra are supported. More interestingly, compound 1 has outstanding photocatalytic activity, which is mainly attributed to the open-framework structure and the cobalt ions as active sites. Upon catalysis for eight hours, its maximum CO generation rate is 9982.13 µmol g-1 h-1, with a selectivity of 81.8%. Additionally, compound 1 takes on weak antiferromagnetic coupling due to Co(II) ions.

Two Windmill-Shaped Ln18 Nanoclusters Exhibiting High Magnetocaloric Effect and Luminescence.

The self-assembly of the high-nuclearity Ln-exclusive nanoclusters is challenging but of significance due to its aesthetically pleasing architectures and far-reaching latent applications in magnetic cooling technologies. Herein, two novel high-nuclearity lanthanide nanoclusters were successfully synthesized under solvothermal conditions, formulated as {[Gd18(IN)20(HCOO)8(µ6-O)(µ3-OH)24(H2O)4]·4H2O}n and {[Eu18(IN)16(HCOO)8(CH3COO)4(µ6-O)(µ3-OH)24(H2O)4]·5H2O}n (abbreviated as Gd18 and Eu18, HIN = isonicotinic acid). Both of them possess novel and exquisite windmill-shaped cationic cores in the family of high-nuclearity Ln-exclusive nanoclusters. Remarkably, the adjacent second building units are interconnected into a three-dimensional (3D) metal-organic framework by IN- ligands. As expected, the abundant existence of GdIII ions endows Gd18 with a favorable magnetic entropy change at 2.0 K for ΔH = 7.0 T (-ΔSmmax = 40.0 J kg-1 K-1), and Eu18 displays the typical luminescence of EuIII ions.

Efficient Visible-Light-Driven Hydrogen Production over Cu-Modified Polyoxotungstate Hybrids.

Hydrogen energy is a renewable and clean source, which makes a great difference in future sustainable energy systems. Visible-light-driven photocatalysis reaction involves harnessing the abundance of sunlight for hydrogen production among many catalytic technologies. However, the fabrication of photocatalysts that have distinctive performance in visible light is still the primary challenge. Herein, two new Cu-modified polyoxotungstate hybrids, {[Cu2(bim)4(H2O)2](HBW12O40)2·(H2bim)2·8H2O} (1) (bim = [1,1'-methylenebis(1H-imidazole)]) and {[Cu2(bim)4(H2O)2](H3PW10Ti2O40)2·(H2bim)2·8H2O} (2), have been successfully isolated by bridging two saturated Keggin polyoxotungstates and copper-azole complexes. Not surprisingly, 2 holds higher reduction activity due to the more negative charge and stronger basicity on the terminal oxygen of Ti═O and bridge oxygen of Ti-O-W. The H2 yield was 17075 µmol g-1 h-1 for 2 in the tunable light-driven H2 production system, which is promising in the field of photocatalysis.

Effect of virtual cement space and restorative materials on the adaptation of CAD-CAM endocrowns.

BACKGROUND: This study aimed to evaluate the effect of virtual cement space and restorative materials on the fit of computer-aided design and computer-aided manufacturing (CAD-CAM) endocrowns. METHODS: A mandibular first molar tooth model received a butt joint margin endocrown preparation with a 2-mm occlusal thickness. Then, using a 3D-printing system, 120 copies of this prepared die were printed and assigned equally to three groups with different cement space settings (30, 60, and 120 µm) during the chairside CAD design. In the milling process, CAD-based models with a particular space setting were subdivided into four groups (n = 10) and fabricated from different CAD-CAM materials: Vita Suprinity (VS), Celtra Duo (CD), Lava Ultimate (LU), and Grandio blocs (GR). Finally, the endocrowns were stabilized over their corresponding models with siloxane and subjected to micro-computed tomography to measure the fit. RESULTS: The cement space that was predesigned at 30 µm generated the largest marginal discrepancy (from 144.68 ± 22.43 µm to 174.36 ± 22.78 µm), which was significantly different from those at 60 µm and 120 µm (p < 0.001). The combination of VS or CD with a pre-setting cement space of 60 µm and the combination of LU or GR with a cement space of 120 µm showed better agreement between the predesigned and actual measured marginal gap widths. For internal adaptation, only the cement space set to 30 µm exceeded the clinically acceptable threshold (200 µm). CONCLUSIONS: The setting of the cement space and restorative material significantly affected the marginal adaptation of CAD-CAM endocrown restorations. Considering the discrepancy between design and reality, different virtual cement spaces should be applied to ceramic and resin composite materials.

Low-Dose X-Ray Increases Paracellular Permeability of Human Renal Glomerular Endothelial Cells.

Objective: Glomerular endothelium functions as a filtration barrier of metabolites in the kidney. Although X-ray irradiation modulated the permeability of the vascular endothelium, the response of human renal glomerular endothelial cells (HRGECs) to low-dose X-ray irradiation has not been investigated. We evaluated the impacts of low-dose X-ray irradiation on HRGECs and revealed the underlying mechanism. Methods: HRGECs were exposed to X-ray with doses of 0, 0.1, 0.5, 1.0, and 2.0 Gy. The proliferation, viability, and apoptosis of HRGECs were examined by MTT assay, trypan blue staining assay, and TUNEL staining, respectively. The paracellular permeability was assessed by paracellular permeability assay. The expression of VE-cadherin was investigated via immunofluorescence assay. Western blot and qRT-PCR detected the expression levels of VE-cadherin and CLDN5. Besides, the expression levels of pVE-cadherin (pY658), TGF-ß, TGF-ßRI, Src, p-Src, Smad2, p-Smad2, Smad3, p-Smad3, SNAIL, SLUG, and apoptosis-related proteins were tested by Western blot. Results: The proliferation, viability, and apoptosis of HRGECs were not affected by low-dose (<2.0 Gy) X-ray irradiation. X-ray irradiation dose-dependently reduced the level of VE-cadherin, and VE-cadherin and CLDN5 levels were reduced with X-ray irradiation. The levels of pY658, p-Src, p-Smad2, and p-Smad3 were upregulated with the increase in X-ray dose. Besides, the paracellular permeability of HRGECs was increased by even low-dose (<2.0 Gy) X-ray irradiation. Therefore, low-dose X-ray irradiation reduced the cumulative content of VE-cadherin and increased the level of pY658 via activation of the TGF-ß signaling pathway. Conclusion: Even though low-dose X-ray exposure had no impact on proliferation, viability, and apoptosis of HRGECs, it increased the paracellular permeability by deterioration and downregulation of VE-cadherin through stimulating the TGF-ß signaling pathway. This study built the framework for kidney response to low-dose irradiation exposure.

Two 1D Anderson-Type Polyoxometalate-Based Metal-Organic Complexes as Bifunctional Heterogeneous Catalysts for CO2 Photoreduction and Sulfur Oxidation.

Sulfur oxides from the combustion of petrol and excessive emissions of carbon dioxide (CO2) are currently the main causes of environmental pollution. Considerable interest has been paid to solving the challenge, and catalytic reactions seem to be the desired choice. Due to the high density of Lewis acid active sites, polyoxometalates are considered to be the ideal choice for these catalytic reactions. Herein, two captivating polyoxometalate-based metal-organic complexes, formulated as [Co(H2O)2DABT]2[CrMo6(OH)5O19] ({Co-CrMo6}) and [Zn(H2O)2DABT]2[CrMo6(OH)5O19] ({Zn-CrMo6}) (DABT = 3,3'-diamino-5,5'-bis(1H-1,2,4-triazole)) were successfully obtained under hydrothermal conditions. The structural analysis demonstrates that {Co-CrMo6} and {Zn-CrMo6} are isostructural with two different transition metal (Co/Zn) ions based on quadridentate Anderson-type [CrMo6(OH)5O19]4- polyanions. A fan-shaped unit of {Co-CrMo6}/{Zn-CrMo6} is linked to generate a one-dimensional (1D) ladder-like structure. Intriguingly, benefitting from rich Co centers with a suitable energy band structure, {Co-CrMo6} displays better photocatalytic activity than {Zn-CrMo6} for converting CO2 into CO, endowing the CO formation of 1935.3 µmol g-1 h-1 with high selectivity. Meanwhile, {Co-CrMo6} also exhibits a satisfactory removal rate of 99% for oxidizing dibenzothiophene at 50 °C, which suggests that {Co-CrMo6} may be utilized as a potential dual functional material with immense prospects in photocatalytic CO2 reduction and sulfur oxidation for the first time.

An isolated doughnut-like molybdenum(V) cobalto-phosphate cluster exhibiting excellent photocatalytic performance for carbon dioxide conversion.

An isolated doughnut-like molybdenum(V) cobalto-phosphate cluster with the formula (C11NH10)2{[Co(H2O)6]@[H29Co16Mo16(H2O)16(PO4)24O36]}(H2PO4)·25H2O has been successfully synthesized by a hydrothermal method. Single crystal X ray diffraction analysis shows that four {Co4O60} tetramers and eight {Mo2O10} dimers are linked by oxygen atoms and phosphate groups to construct a doughnut-type structure for [Co@{Co16Mo16}], in which one [CoII(H2O)6]2+ octahedron is enclosed. More importantly, [Co@{Co16Mo16}] exhibits promising photocatalytic performance for CO2 reduction with the CO formation rate of 6764.3 µmol g-1 h-1 and the selectivity of 96.89%. In addition, the cycling test indicated that [Co@{Co16Mo16}] can be reused for at least four cycles without significant loss of catalytic activity. The result of this work may provide new insight for the synthesis of highly efficient POM-based photocatalysts for CO2 reduction.

Sweat-Resistant Silk Fibroin-Based Double Network Hydrogel Adhesives.

The adhesion between flexible epidermal sensors and human skin is essential for maintaining the stable functionality of the sensors. However, it is still challenging for epidermal electronic devices to achieve durable adhesion to the surface of the skin, especially under sweaty or humid conditions. Here, we report a silk fibroin-polyacrylamide (SF-PAAm) double network (DN) hydrogel adhesive with excellent biocompatibility, strong and durable adhesion on wet surfaces, and tunable adhesive properties. The hydrophilic PAAm network greatly improves the water retention capability of the DN hydrogel and reduces the ß-sheet crystalline content of SF, leading to excellent adhesive properties of the hydrogel across a wide range of humidity. The SF-PAAm DN hydrogel adhesive can be readily integrated with different epidermal sensor arrays and performs very well in real-time on-body sweat sensing. The SF-PAAm DN hydrogels have great potential for application in various epidermal healthcare sensors as well as medical adhesives for other medical applications.

Two POM-based compounds containing Zn-capped Keggin anions as decent heterogeneous catalysts for sulfur oxidation and CO2 cycloaddition reactions.

Carbon dioxide (CO2) and the combustion of sulfide in gasoline are the main causes of air pollution. A great deal of attention has been paid to solving the problem and the catalytic reaction seems to be a decent choice. Due to the high-density of Lewis acidic active sites, polyoxometalates are undoubtedly an ideal choice for the sulfur oxidation reaction. With the reasons foregoing, two novel Zn-capped polyoxometalate-based organic-inorganic hybrids, {[α-PMoV2MoVI10O39(OH)Zn2][bbbm]3}·0.5C2H5OH (1) and TBA2{[ε-PMoV8MoVI4O37(OH)3Zn4][phim]3} (2) ((where bbbm = 1-(4-imidazol-1-ylbutyl) imidazole) and phim = 2-phenylimidazole) were successfully obtained by hydrothermal synthesis. In the two compounds, the N-donor ligands in a monodentate or bidentate coordination mode are directly connected to the Keggin anions by Zn-capped atoms, forming an extended one-dimensional chain. It is noteworthy that compound 2 ends up with an interesting spiral infinite chain possibly thanks to the TBA+ cations residing in gaps as structure-directing agents. Simultaneously, the catalytic properties indicate that compounds 1 and2 as efficient heterogeneous catalysts display a decent catalytic activity in the sulfur removal process. Especially, 2 enabled satisfying catalytic oxidation of dibenzothiophene (DBT) to produce more valuable dibenzothiophene sulfone (DBTO2) at 55 °C, and the conversion almost reached 99%. Besides, compound 2 also shows satisfactory catalytic effectiveness in the oxidation of various epoxides in the CO2 cycloaddition reaction, which suggests that compound 2 has the potential to function as a dual functional material with tremendous prospects in sulfur oxidation and carbon dioxide cycloaddition for the first time.