RESUMO
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has received tremendous attention in the energy field owing to its high conductivity, ease of processing, biocompatibility, and low cost-effectiveness. Combining PEDOT:PSS and photonic crystals (PCs) is expected to promote the development of high-performance optoelectronic devices. The conductivity of PEDOT:PSS at present can only be measured through specific equipment, and the visualization of optoelectronic integration still remains a challenge. In this study, various patterned PEDOT:PSS inverse opal (PEDOT:PSS-IO) films are constructed by associating the conductivity of PEDOT:PSS with the structural color of PCs based on the synergistic effect of morphology/conformation transition, which achieves the visualization of optoelectronic integration. Morphology transition of the PEDOT:PSS-IO film alters from the interconnected to gradual closure pore structure, accompanied by an unusual blueshift of the stopband, which can be attributed to the collapse/reconstruction of the frame of the PEDOT:PSS-IO film. Conformation transition of PEDOT chains converts from the benzene to quinone structure, accompanying an enhancement of conductivity, which resulted from PSS removal and secondary doping. Under the induction of a polar solvent, the PEDOT:PSS-IO film brings the changes in optical/electrical dual-signals based on the synergistic effect of morphology/conformation transition. This phenomenon can be developed for the creation of a conductive PC pattern by using a polar solvent (water) as an ink, which is beneficial for the visualization of optoelectronic integration. This work provides essential significance for the fabrication of functional optoelectronic devices.
RESUMO
The fabrication of materials that can switch between circularly polarized luminescence (CPL) signals is both essential and challenging. Here, two new halogen-bonded fluorescent molecular photoswitches, namely, HB-switch 1 and HB-switch 2, containing α-cyano-substituted diarylethene compounds with different end groups were developed. Upon exposure to specific UV or visible light wavelengths, they exhibited controllable and reversible Z/E photoisomerization. When these switches were integrated into blue-phase liquid crystals (BPLCs), the temperature range of BP significantly expanded. Notably, the BP system incorporating HB-switch 1 exclusively achieved reversible polarization inversion of CPL signals under irradiation with specific UV/Visible light and during cooling/heating. The photo/thermal dual-response behavior of the CPL signals can be attributed to the phase transition from a high-symmetry 3D BP Icubic lattice to a low-symmetry 1D helical superstructure induced by the Z/E photoisomerization of HB-switch 1 and temperature changes. This study underscores the significance of employing halogen-bond assembly strategies to design materials with switchable CPL signals, opening new possibilities for CPL-active systems.
RESUMO
Polymer-based circularly polarized luminescence (CPL) materials with the advantage of diversified structure, easy fabrication, high thermal stability, and tunable properties have garnered considerable attention. However, adequate and precise tuning over CPL in polymer-based materials remains challenging due to the difficulty in regulating chiral structures. Herein, visualized full-color CPL is achieved by doping red, green, and blue quantum dots (QDs) into reconfigurable blue phase liquid crystal elastomers (BPLCEs). In contrast to the CPL signal observed in cholesteric liquid crystal elastomers (CLCEs), the chiral 3D cubic superstructure of BPLCEs induces an opposite CPL signal. Notably, this effect is entirely independent of photonic bandgaps (PBGs) and results in a high glum value, even without matching between PBGs and the emission bands of QDs. Meanwhile, the lattice structure of the BPLCEs can be reversibly switched via mechanical stretching force, inducing on-off switching of the CPL signals, and these variations can be further fixed using dynamic disulfide bonds in the BPLCEs. Moreover, the smart polymer-based CPL systems using the BPLCEs for anti-counterfeiting and information encryption have been demonstrated, suggesting the great potential of the BPLCEs-based CPL active materials.
RESUMO
Antibiotics are widely used to treat bacterial infection and reduce the mortality rate, while antibiotic overuse can cause gut microbiota dysbiosis. The impact of antibiotics on gut microbiota is not fully understood. In our study, four commonly used antibiotics (ceftazidime, cefoperazone-sulbactam, imipenem-cilastatin, and moxifloxacin) were given subcutaneously to mice, and their impacts on the gut microbiota composition and serum cytokine levels were evaluated through 16S rRNA analysis and a multiplex immunoassay. Antibiotic treatment markedly reduced gut microbiota diversity and changed gut microbiota composition. Antibiotic treatment significantly increased and decreased the abundance of Firmicutes and Bacteroidota, respectively. The antibiotic treatments increased the abundance of opportunistic pathogens such as Enterococcus and decreased that of Lachnospiraceae and Muribaculaceae. For moxifloxacin, the significantly high abundance of Enterococcus and Klebsiella was observed after 14 and 21 days of treatment. However, a relatively low abundance of opportunistic pathogens was found after 14 days of imipenem-cilastatin treatment. Additionally, the serum levels of various pro-inflammatory cytokines, such as IL-1ß, IL-12 (p70), and IL-17, significantly increased after 21 days of antibiotic treatments. Overall, these results provide a guide for rational use of antibiotics in clinical settings: short-term use of moxifloxacin is recommended with regard to gut microbiota health, and the 14-day use of imipenem-cilastatin may have a less severe impact than other antibiotics.IMPORTANCEAntibiotic treatments are directly associated with changes in gut microbiota and are effective against both pathogens and beneficial bacteria. Gut microbiota dysbiosis induced by antibiotic treatment could increase the risk of some diseases. Therefore, an adequate understanding of gut microbiota changes after antibiotic use is crucial. In this study, we investigated the effects of continuous treatment with antibiotics on gut microbiota, serum cytokines, and intestinal inflammatory response. Our results suggest that short-term use of moxifloxacin is recommended, and the 14-day use of imipenem-cilastatin may have a less severe effect on gut microbiota health than cefoperazone-sulbactam. These results provide useful guidance on the rational use of antibiotics with regard to gut microbiota health.
Assuntos
Antibacterianos , Citocinas , Microbioma Gastrointestinal , Animais , Microbioma Gastrointestinal/efeitos dos fármacos , Camundongos , Citocinas/sangue , Citocinas/metabolismo , Antibacterianos/farmacologia , Antibacterianos/administração & dosagem , Antibacterianos/efeitos adversos , Bactérias/efeitos dos fármacos , Bactérias/classificação , Bactérias/genética , Disbiose/induzido quimicamente , Disbiose/microbiologia , RNA Ribossômico 16S/genética , Cefoperazona/administração & dosagem , Cefoperazona/farmacologia , Cefoperazona/uso terapêutico , Masculino , Moxifloxacina/administração & dosagem , Moxifloxacina/farmacologia , Feminino , Camundongos Endogâmicos C57BLRESUMO
Periprosthetic infection and mechanical loosening are two leading causes of implant failure in orthopedic surgery that have devastating consequences for patients both physically and financially. Hence, advanced prostheses to simultaneously prevent periprosthetic infection and promote osseointegration are highly desired to achieve long-term success in orthopedics. In this study, we proposed a multifunctional three-dimensional printed porous titanium alloy prosthesis coated with imidazolium ionic liquid. The imidazolium ionic liquid coating exhibited excellent bacterial recruitment property and near-infrared (NIR) triggered photothermal bactericidal activity, enabling the prosthesis to effectively trap bacteria in its vicinity and kill them remotely via tissue-penetrating NIR irradiation. In vivo anti-infection and osseointegration investigations in infected animal models confirmed that our antibacterial prosthesis could provide long-term and sustainable prevention against periprosthetic infection, while promoting osseointegration simultaneously. It is expected to accelerate the development of next-generation prostheses and improve patient outcomes after prosthesis implantation.
RESUMO
AIM: Our study focuses on the microbial and metabolomic profile changes during the adenoma stage, as adenomas can be considered potential precursors to colorectal cancer through the adenoma-carcinoma sequence. Identifying possible intervention targets at this stage may aid in preventing the progression of colorectal adenoma (CRA) to malignant lesions. Furthermore, we evaluate the efficacy of combined microbial and metabolite biomarkers in detecting CRA. METHODS: Fecal metagenomic and serum metabolomic analyses were performed for the discovery of alterations of gut microbiome and metabolites in CRA patients (n = 26), Colorectal cancer (CRC) patients (n = 19), Familial Adenomatous Polyposis (FAP) patients (n = 10), and healthy controls (n = 20). Finally, analyzing the associations between gut microbes and metabolites was performed by a Receiver Operating Characteristic (ROC) curve. RESULTS: Our analysis present that CRA patients differ significantly in gut microflora and serum metabolites compared with healthy controls, especially for Lachnospiraceae and Parasutterella. Its main metabolite, butyric acid, concentrations were raised in CRA patients compared with the healthy controls, indicating its role as a promoter of colorectal tumorigenesis. α-Linolenic acid and lysophosphatidylcholine represented the other healthy metabolite for CRA. Combining five microbial and five metabolite biomarkers, we differentiated CRA from CRC with an Area Under the Curve (AUC) of 0.85 out of this performance vastly superior to the specificity recorded by traditional markers CEA and CA199 in such differentiation of these conditions. CONCLUSIONS: The study underlines significant microbial and metabolic alterations in CRA with a novel insight into screening and early intervention of its tumorigenesis.
Assuntos
Adenoma , Neoplasias Colorretais , Detecção Precoce de Câncer , Microbioma Gastrointestinal , Humanos , Neoplasias Colorretais/sangue , Neoplasias Colorretais/diagnóstico , Neoplasias Colorretais/metabolismo , Adenoma/metabolismo , Adenoma/sangue , Adenoma/diagnóstico , Masculino , Feminino , Pessoa de Meia-Idade , Adulto , Idoso , Fezes/microbiologia , Fezes/química , Biomarcadores Tumorais/sangue , Carcinoma/metabolismo , Carcinoma/sangue , Carcinoma/diagnósticoRESUMO
Genetically engineered silkworms have been widely used to obtain silk with modified characteristics especially by introducing spider silk genes. However, these attempts are still challenging due to limitations in transformation strategies and difficulties in integration of the large DNA fragments. Here, we describe three different transformation strategies in genetically engineered silkworms, including transcription-activator-like effector nuclease (TALEN)-mediated fibroin light chain (FibL) fusion (BmFibL-F), TALEN-mediated FibH replacement (BmFibH-R), and transposon-mediated genetic transformation with the silk gland-specific fibroin heavy chain (FibH) promoter (BmFibH-T). As the result, the yields of exogenous silk proteins, a 160â kDa major ampullate spidroin 2 (MaSp2) from the orb-weaving spider Nephila clavipes and a 226â kDa fibroin heavy chain protein (EvFibH) from the bagworm Eumeta variegate, reach 51.02 and 64.13% in BmFibH-R transformed cocoon shells, respectively. Moreover, the presence of MaSp2 or EvFibH significantly enhances the toughness of genetically engineered silk fibers by â¼86% in BmFibH-T and â¼80% in BmFibH-R silkworms, respectively. Structural analysis reveals a substantial â¼40% increase in fiber crystallinity, primarily attributed to the presence of unique polyalanines in the repetitive sequences of MaSp2 or EvFibH. In addition, RNA-seq analysis reveals that BmFibH-R system only causes minor impact on the expression of endogenous genes. Our study thus provides insights into developing custom-designed silk production using the genetically engineered silkworm as the bioreactor.
RESUMO
OBJECTIVE: Major depressive disorder (MDD) is a severe psychiatric symptom worldwide, and the coexistence of MDD with metabolic syndrome (MetS) is common in clinical practice. However, gender differences in comorbid MetS in first-episode and drug-naïve (FEDN) MDD patients have not been reported. Here, we explored potential gender differences in the prevalence and clinical correlates of comorbid MetS in FEDN MDD patients. METHODS: A cross-sectional study of 1718 FEDN MDD patients was conducted. Demographic and clinical data were collected. The Hamilton Depression Scale (HAMD), Hamilton Anxiety Scale, and Positive and Negative Syndrome Scale positive subscale were used to evaluate depression, anxiety, and psychotic symptoms, respectively. RESULTS: The prevalence of MetS was 1.645-fold higher in female MDD patients (38.50%) than in male patients (26.53%). Patients with MetS had higher HAMD score, Hamilton Anxiety Scale score, and Positive and Negative Syndrome Scale positive subscale score than patients without MetS (p values < .001). Furthermore, suicide attempts (male: odds ratio [OR] = 1.706, p = .034; female: OR = 1.639, p = .004) and HAMD score (male: OR = 1.251, p < .001; female: OR = 1.148, p < .001) were independently associated with MetS in male and female patients, whereas age of onset was independently associated with MetS only in female patients (OR = 1.744, p = .047). CONCLUSIONS: Our findings suggest significant gender differences in the prevalence and clinical correlates of comorbid MetS in FEDN MDD patients. Clinical variables (suicide attempts and HAMD scores) may be independently associated with MetS in MDD patients.
Assuntos
Transtorno Depressivo Maior , Síndrome Metabólica , Humanos , Masculino , Feminino , Transtorno Depressivo Maior/epidemiologia , Transtorno Depressivo Maior/diagnóstico , Síndrome Metabólica/epidemiologia , Prevalência , Estudos Transversais , Fatores SexuaisRESUMO
The sensitivity of triboelectric nanogenerators (TENGs) to the surface charge density highlights the significance of triboelectric materials and their modifications. Efforts have been directed toward developing effective strategies for increasing the surface charge density, expanding the potential applications of TENGs. This study proposes the use of irradiation technology for grafting to modify the electron-donating capability of poly(ether sulfone) (PES), thereby affording a dual benefit of enhancing the surface charge density and inducing a shift in the position of PES from negative to positive within the triboelectric series. The TENG based on grafted PES has resulted in a significant 3-fold increase in surface charge density compared to that of pristine PES, reaching 263 µC m-2. The surface charge density can be further increased to 502 µC m-2 through charge pumping. Notably, irradiation technology presents advantages over chemical grafting methods, particularly in terms of sustainability and environmental friendliness. This innovative approach shows great potential in advancing the domain of TENGs.
RESUMO
The osmotic energy, an abundant renewable energy source, can be directly converted to electricity by nanofluidic devices with ion-selective membranes. 2D nanochannels constructed by nanosheets possess abundant lateral interfacial ion-exchange sites and exhibit great superiority in nanofluidic devices. However, the most accessible orientation of the 2D nanochannels is parallel to the membrane surface, undoubtedly resulting in the conductivity loss. Herein, first vertically aligned 2D subnanochannel arrays self-assembled by a smectic liquid crystal (LC) network that exhibit high-performance osmotic energy conversion are demonstrated. The 2D subnanochannel arrays are fabricated by in situ photopolymerization of monomers in the LC phase. The as-prepared membrane exhibits excellent water-resistance and mechanical strength. The 2D subnanochannels with excellent cation selectivity and conductivity show high-performance osmotic energy conversion. The power density reaches up to about 22.5 W m-2 with NaCl solution under a 50-fold concentration gradient, which is among with ultrahigh power density. This membrane design concept provides promising applications in osmotic energy conversion.
RESUMO
Blue phase liquid crystal (BPLC) lasers have potential applications in displays, sensors, and anti-counterfeiting fields owing to their outstanding optical properties. However, there remain challenges on lasing below 0 °C, which significantly limits the potential application of BPLC lasers in low-temperature environments. In this work, BPLC lasing below 0 °C is realized for the first time in a super-wide temperature range of -180-240 °C using a well-designed fully-polymerized BPLC system with a narrow line width of 0.0881 nm and a low lasing threshold of 37 nJ pulse-1. This fully-polymerized BPLC both effectively avoids low-temperature random crystallization and has excellent compatibility with dye molecules that significantly widen the lasing temperature range below 0 °C. Besides, the variations of laser peak and threshold are also revealed below 0 °C, that is, redshifted laser wavelength and increased threshold value with decreasing temperature, which contribute to a blue-shifted laser signal and a U-shaped lasing threshold in -180-240 °C. These unique laser behaviors can be ascribed to the temperature-dependent anisotropically microstructural deformation of the BP lattice. This work not only opens a door to the development of low-temperature BPLC lasers but also sets out important insights in the design of novel organic optical devices.
RESUMO
Fabrication of biodegradable shape memory polymer with remotely controllable shape actuation is of great significance in the biomedical field but remains challenging. Herein, we present a simple strategy to fabricate a monolayer-based stretchable and mechanically robust polycaprolactone/polydopamine elastomer via efficient thiol-ene click chemistry. The resultant elastomers exhibit desirable photothermal transfer efficiency and can enable rapid temperature increase over the melting temperature of polymeric matrix, and quantitative results demonstrate that the crosslinked film exhibited excellent shape memory properties with shape fixity (Rf) and shape recovery ratios (Rr) approaching 92.3â¯% and 95.6â¯%, respectively. Combined with photo stimuli, anisotropic polymer chain relaxation of the prestretched film can generate asymmetric contractions and eventually give rise to ut out-of-plane bending actuations upon photo stimulation, meanwhile, numerical simulation reveals the interaction mechanism of light with film. Beyond this, we further demonstrate that the bending angle is correlated with the parameters of prestretch strain, film thickness as well as irradiation time, and the maximum value can reach 158° with prestretch strain of 200â¯% and film thickness of 0.3â¯mm. In particular, the bent structures could be reversibly deformed into plane state via photo-directed corresponding opposite surfaces. Remarkably, the in vitro degradation properties of the elastomers on PBS-T buffer solutions demonstrated that the degradation was composed of induction stage and acceleration stage. This work will pave way for designing biodegradable light-induced shape memory materials toward biomedical device fields and so on.
Assuntos
Elastômeros , Indóis , Polímeros , Elastômeros/química , Polímeros/química , PoliésteresRESUMO
Liquid crystalline blue phase (BP) with 3D cubic nanostructure has attracted much interest in the fields of photonic crystals due to their unique optical properties and the ability to control the flow of light. However, there remains a challenge for simultaneously achieving self-assembly and mechanochromic response of soft 3D cubic nanostructures. Herein, a scalable strategy for the preparation of soft 3D cubic nanostructured films using oligomerization of the Michael addition reaction, which can induce the assembly of double-twisted cylinders for collective replication, remodeling, recombination, and growth, with a phase transition from BPII to BPI, and to chiral nematic phase, is presented. The prepared BP patterns can be obtained by Michael addition oligomerization reaction and composite mask photopolymerization, which present distinct mechanochromic sensitive due to patterns derived from different BP state, and the pattern can be reversibly erased and recurred by mechanical force and temperature. The average domain size of BPII prepared using this strategy can achieve 96 µm, which is 2.5 times larger than that obtained using the conventional cooling approach. This work provides new insights into the self-assembly and selective chemochromism of functional materials and devices.
RESUMO
The adaptive control of sunlight through photochromic smart windows could have a huge impact on the energy efficiency and daylight comfort in buildings. However, the fabrication of inorganic nanoparticle and polymer composite photochromic films with a high contrast ratio and high transparency/low haze remains a challenge. Here, a solution method is presented for the in situ growth of copper-doped tungsten trioxide nanoparticles in polymethyl methacrylate, which allows a low-cost preparation of photochromic films with a high luminous transparency (luminous transmittance Tlum = 91%) and scalability (30 × 350 cm2 ). High modulation of visible light (ΔTlum = 73%) and solar heat (modulation of solar transmittance ΔTsol = 73%, modulation of solar heat gain coefficient ΔSHGC = 0.5) of the film improves the indoor daylight comfort and energy efficiency. Simulation results show that low-e windows with the photochromic film applied can greatly enhance the energy efficiency and daylight comfort. This photochromic film presents an attractive strategy for achieving more energy-efficient buildings and carbon neutrality to combat global climate change.
RESUMO
Endotoxin adsorption has received extensive attention in the field of blood purification. However, developing highly efficient endotoxin adsorbents with excellent hemocompatibility remains challenging. In this study, we propose a new approach for developing the functional polyethersulfone (PES) membrane to remove endotoxins. First, the PES polymer is grafted with polyethylene glycol methyl acrylate (PEG-MA) in a homogeneous phase system via γ irradiation, and PES-g-PEG can be directly used to prepare the membrane by the phase inversion method. Then, polydopamine (PDA) is coated as an adhesive layer onto a PES-g-PEG membrane in an alkaline aqueous solution, and lysozyme (Lyz) is covalently immobilized with PDA through the Schiff base reaction. Lysozyme acts as an affinity adsorption ligand of endotoxin through charge and hydrophobic action. Our study reveals that the PEG branched chain and the PDA coating on the PES membrane can maintain the secondary structure of lysozyme, and thus, the immobilized Lyz can maintain high activity. The adsorption capacity of endotoxins for the PES-g-PEG/PDA/Lyz membrane is 1.28 EU/mg, with an equilibrium adsorption time of 6 h. Therefore, the PES-g-PEG/PDA/Lyz membrane shows great potential application in the treatment of endotoxemia.
Assuntos
Endotoxinas , Muramidase , Sulfonas , PolietilenoglicóisRESUMO
Correction for 'Intelligent antibacterial surface based on ionic liquid molecular brushes for bacterial killing and release' by Lunqiang Jin et al., J. Mater. Chem. B, 2019, 7, 5520-5527, https://doi.org/10.1039/C9TB01199D.
RESUMO
Reducing cropland ammonia (NH3) emissions while improving air quality and food supply is a challenge, particularly in China where there are millions of smallholder farmers. We tested the effectiveness of a tailored nitrogen (N) management strategy applied to wheat-maize cropping systems in 'demonstration squares' across Quzhou County in the North China Plain. The N-management techniques included optimal N rates, deep fertilizer placement and application of urease inhibitors, implemented through cooperation between government, researchers, businesses and smallholders. Compared with conventional local smallholder practice, our NH3 mitigation campaign reduced NH3 volatilization from wheat and maize by 49% and 39%, and increased N-use efficiency by 28% and 40% and farmers' profitability by 25% and 19%, respectively, with no detriment to crop yields. County-wide atmospheric NH3 and fine particulate matter (with aerodynamic diameter <2.5 µm) concentrations decreased by 40% and 8%, respectively. County-wide net benefits were estimated at US$7.0 million. Our demonstration-square approach shows that cropland NH3 mitigation and improved air quality and farm profitability can be achieved simultaneously by coordinated actions at the county level.
Assuntos
Amônia , Fazendeiros , Humanos , Grão Comestível , Fazendas , China , Triticum , Zea maysRESUMO
Lipopolysaccharide (LPS) is the primary bacterial toxin that is vital to the pathogenesis and progression of sepsis associated with extremely high morbidity and mortality worldwide. However, specific clearance of LPS from circulating blood is highly challenging because of the structural complexity and its variation between/within bacterial species. Herein, a robust strategy based on phage display screening and hemocompatible peptide bottlebrush polymer design for specific clearance of targeted LPS from circulating blood is proposed. Using LPS extracted from Escherichia coli as an example, a novel peptide (HWKAVNWLKPWT) with high affinity (KD < 1.0 nм), specificity, and neutralization activity (95.9 ± 0.1%) against the targeted LPS is discovered via iterative affinity selection coupled with endotoxin detoxification screening. A hemocompatible bottlebrush polymer bearing the short peptide [poly(PEGMEA-co-PEP-1)] exhibits high LPS selectivity to reduce circulating LPS level from 2.63 ± 0.01 to 0.78 ± 0.05 EU mL-1 in sepsis rabbits via extracorporeal hemoperfusion (LPS clearance ratio > 70%), reversing the LPS-induced leukocytopenia and multiple organ damages significantly. This work provides a universal paradigm for developing a highly selective hemoadsorbent library fully covering the LPS family, which is promising to create a new era of precision medicine in sepsis therapy.
Assuntos
Lipopolissacarídeos , Sepse , Animais , Coelhos , Endotoxinas , Sepse/terapia , Peptídeos , BactériasRESUMO
In the manual dynamic surface-enhanced Raman spectroscopy (D-SERS) detection process, it is difficult to focus on sample drop due to the constantly changing hotspot and easy judgment method. In this paper, we proposed an automatic focusing method based on long time stable hotspot with aid of optimization of hill-climbing algorithm and achieved on a designed device. First, set up a high temperature accelerating evaporation process to obtain hotspot and then cool to a low temperature rapidly to maintain it. Then, the spectral intensity was used as a focus of feedback signal in optimized hill-climbing algorithm to drive the sample stage to move up and down to adjust the depth of the laser on the samples to realize automatic focusing. As a result, the hotspot can be maintained for 5 min, and the autofocusing result can be achieved within 9 s, while the sensitivity was improved with two orders of magnitude in D-SERS detection of crystal violet (CV) compared with manual focusing.
RESUMO
Recombinant trimeric SARS-CoV-2 Spike protein with PIKA (polyI:C) adjuvant induces potent and durable neutralizing antibodies that protect against multiple SARS-CoV-2 variants. The immunoglobulin subclasses of viral-specific antibodies remain unknown, as do their glycosylation status on Fc regions. In this study, we analyzed immunoglobulins adsorbed by plate-bound recombinant trimeric SARS-CoV-2 Spike protein from serum of Cynomolgus monkey immunized by recombinant trimeric SARS-CoV-2 Spike protein with PIKA (polyI:C) adjuvant. The results showed that IgG1 was the dominant IgG subclass as revealed by ion mobility mass spectrometry. The average percentage of Spike protein-specific IgG1 increased to 88.3% as compared to pre-immunization. Core fucosylation for Fc glycopeptide of Spike protein-specific IgG1 was found to be higher than 98%. These results indicate that a unique Th1-biased, IgG1-dominant antibody response was responsible for the effectiveness of PIKA (polyI:C) adjuvant. Vaccine-induced core-fucosylation of IgG1 Fc region may reduce incidence of severe COVID-19 disease associated with overstimulation of FCGR3A by afucosylated IgG1.