Circuit-level convergence of electronics and photonics: basic concepts and recent advances.

Integrated photonics is widely regarded as an important post-Moore's law research direction. However, it suffers from intrinsic limitations, such as lack of control and satisfactory photonic memory, that cannot be solved in the optical domain and must be combined with electronics for practical use. Inevitably, electronics and photonics will converge. The photonic fabrication and integration technology is gradually maturing and electronics-photonics convergence (EPC) is experiencing a transition from device integration to circuit design. We derive a conceptual framework consisting of regulator, oscillator, and memory for scalable integrated circuits based on the fundamental concepts of purposeful behavior in cybernetics, entropy in information theory, and symmetry breaking in physics. Leveraging this framework and emulating the successes experienced by electronic integrated circuits, we identify the key building blocks for the integrated circuits for EPC and review the recent advances.

Single-shot on-chip spectral sensors based on photonic crystal slabs.

Miniaturized spectrometers have significant potential for portable applications such as consumer electronics, health care, and manufacturing. These applications demand low cost and high spectral resolution, and are best enabled by single-shot free-space-coupled spectrometers that also have sufficient spatial resolution. Here, we demonstrate an on-chip spectrometer that can satisfy all of these requirements. Our device uses arrays of photodetectors, each of which has a unique responsivity with rich spectral features. These responsivities are created by complex optical interference in photonic-crystal slabs positioned immediately on top of the photodetector pixels. The spectrometer is completely complementary metal-oxide-semiconductor (CMOS) compatible and can be mass produced at low cost.

Author Correction: Subwavelength angle-sensing photodetectors inspired by directional hearing in small animals.

In the version of this Letter originally published, Zongfu Yu was mistakenly not noted as being a corresponding author; this has now been corrected in all versions of the Letter.

Time-reversal symmetry in temporal coupled-mode theory and nonreciprocal device applications.

We present a fundamental result on the role of time-reversal symmetry in the temporal coupled-mode theory (TCMT). The TCMT is a phenomenological theory that describes resonant wave scattering in photonics, acoustics, and other fields. Modifications to the canonical formulation of the TCMT are required for nonreciprocal devices where time-reversal symmetry is usually absent. We discover that previous results on reciprocity for the TCMT are incomplete, and we provide a mathematical proof to clarify the roles of time-reversal symmetry and reciprocity in the TCMT. The new result leads to a general treatment of nonreciprocity in the TCMT. The theoretical result has many practical applications, including the design of nonreciprocal devices such as optical circulators and isolators.

Subwavelength angle-sensing photodetectors inspired by directional hearing in small animals.

Sensing the direction of sounds gives animals clear evolutionary advantage. For large animals, with an ear-to-ear spacing that exceeds audible sound wavelengths, directional sensing is simply accomplished by recognizing the intensity and time differences of a wave impinging on its two ears1. Recent research suggests that in smaller, subwavelength animals, angle sensing can instead rely on a coherent coupling of soundwaves between the two ears2-4. Inspired by this natural design, here we show a subwarvelength photodetection pixel that can measure both the intensity and incident angle of light. It relies on an electrical isolation and optical coupling of two closely spaced Si nanowires that support optical Mie resonances5-7. When these resonators scatter light into the same free-space optical modes, a non-Hermitian coupling results that affords highly sensitive angle determination. By straightforward photocurrent measurements, we can independently quantify the stored optical energy in each nanowire and relate the difference in the stored energy between the wires to the incident angle of a light wave. We exploit this effect to fabricate a subwavelength angle-sensitive pixel with angular sensitivity, δθ = 0.32°.

Optical impedance transformer for transparent conducting electrodes.

A fundamental limitation of transparent conducting electrode design is thought to be the trade-off between photonic and electronic performances. The photonic transmission property of a transparent conducting electrode, however, is not intrinsic but depends critically on the electromagnetic environment where the electrode is located. We develop the concept of optical impedance transformation, and use this concept to design nanophotonic structures that provide broadband and omnidirectional reduction of optical loss in an ultrathin transparent conducting electrode, without compromising its electrical performance.

Two-dimensional chalcogenide nanoplates as tunable metamaterials via chemical intercalation.

New plasmonic materials with tunable properties are in great need for nanophotonics and metamaterials applications. Here we present two-dimensional layered, metal chalcogenides as tunable metamaterials that feature both dielectric photonic and plasmonic modes across a wide spectral range from the infrared to ultraviolet. The anisotropic layered structure allows intercalation of organic molecules and metal atoms at the van der Waals gap of the host chalcogenide, presenting a chemical route to create heterostructures with molecular and atomic precision for photonic and plasmonic applications. This marks a departure from a lithographic method to create metamaterials. Monochromated electron energy-loss spectroscopy in a scanning transmission electron microscope was used to first establish the presence of the dielectric photonic and plasmonic modes in M2E3 (M = Bi, Sb; E = Se, Te) nanoplates and to observe marked changes in these modes after chemical intercalation. We show that these modal properties can also be tuned effectively by more conventional methods such as thickness control and alloy composition of the nanoplates.

Large-area free-standing ultrathin single-crystal silicon as processable materials.

Silicon has been driving the great success of semiconductor industry, and emerging forms of silicon have generated new opportunities in electronics, biotechnology, and energy applications. Here we demonstrate large-area free-standing ultrathin single-crystalline Si at the wafer scale as new Si materials with processability. We fabricated them by KOH etching of the Si wafer and show their uniform thickness from 10 to sub-2 µm. These ultrathin Si exhibits excellent mechanical flexibility and bendability more than those with 20-30 µm thickness in previous study. Unexpectedly, these ultrathin Si materials can be cut with scissors like a piece of paper, and they are robust during various regular fabrication processings including tweezer handling, spin coating, patterning, doping, wet and dry etching, annealing, and metal deposition. We demonstrate the fabrication of planar and double-sided nanocone solar cells and highlight that the processability on both sides of surface together with the interesting property of these free-standing ultrathin Si materials opens up exciting opportunities to generate novel functional devices different from the existing approaches.

Fundamental bounds on decay rates in asymmetric single-mode optical resonators.

We derive tight upper and lower bounds of the ratio between decay rates to two ports from a single resonance exhibiting Fano interference, based on a general temporal coupled-mode theory formalism. The photon transport between these two ports involves both direct and resonance-assisted contributions, and the bounds depend only on the direct process. The bounds imply that, in a lossless system, full reflection is always achievable at Fano resonance, even for structures lacking mirror symmetries, while full transmission can only be seen in a symmetric configuration where the two decay rates are equal. The analytic predictions are verified against full-field electromagnetic simulations.

Absorption enhancement in ultrathin crystalline silicon solar cells with antireflection and light-trapping nanocone gratings.

Enhancing the light absorption in ultrathin-film silicon solar cells is important for improving efficiency and reducing cost. We introduce a double-sided grating design, where the front and back surfaces of the cell are separately optimized for antireflection and light trapping, respectively. The optimized structure yields a photocurrent of 34.6 mA/cm(2) at an equivalent thickness of 2 µm, close to the Yablonovitch limit. This approach is applicable to various thicknesses and is robust against metallic loss in the back reflector.